Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Jobsite Measuring Tools

10/11/17       
cabmaker

Pat Gilbert had a post on the millwork & installation forum about how to manage tools used for hanging cabinets. This made me think about the tools we use for measuring a job site.

The most useful tool is the portable desk. This is really handy when there are no horizontal surfaces to hold drawings while you measure the walls. We put this together using some 1/2 inch plywood and a small photography light stand. The plywood is about 10 x 16. The light stand collapses down to about 15 inches height.

We also use a photography lightstand for driving the the laser level. This extends to about 54 and has a hand crank for fine tuning position. It is made out of plastic and probably does not weigh more than a pound.

The combination squares are throw-away quality. I one time left an antique Brown&Sharpe combo square on a job site and vowed that would never happen again.

The clipboard holds pencils, paper and a plastic ruler for drawing straight lines. The clipboard supports legal size paper.

Not showing is a small Canon digital camera. We can usually get any pictures we need with an iPhone but sometimes prefer the flip screen and more powerful flash.

All of this fits into this bag we got from Amazon. The framing square stays pretty snug when the zipper is drawn tight.

In addition to this we also carry a 4 foot & 6 foot Stabila level. The aluminum step ladder stays in the truck unless we need it.

I am looking now for a photography bag to hold the levels. Getting all this through doorways is usually not an issue of weight or bulk but more about how much you can fit in your hand. Is not a big deal to hold as many as two or three bags in one hand if the handles are made of cloth loops.


View higher quality, full size image (1224 X 1632)


View higher quality, full size image (1632 X 1224)


View higher quality, full size image (1632 X 1224)

Measuring Tool Bag

10/11/17       #2: Jobsite Measuring Tools ...
cabmaker

There is still room in this bag for a set of headphones and a water bottle.


View higher quality, full size image (1224 X 1632)


View higher quality, full size image (1224 X 1632)

10/11/17       #3: Jobsite Measuring Tools ...
DS

About $12 at Bed, Bath and Beyond.


View higher quality, full size image (747 X 1328)


View higher quality, full size image (747 X 1328)

10/11/17       #4: Jobsite Measuring Tools ...
cabmaker

DS,

That is a pretty neat stand.
Is the the top section significantly wider than the bottom (i.e center of gravity issues)?

I am asking because the first thing it made me think of was how it might also be useful for jobsite photography. One of the banes of that endeavor is the constant need to move photography gear in & out of the shot.

Inevitably I shoot a job site then come back to see an errant lens still in the photography frame. Would like to have something that was very portable yet would still allow me to array the various accouterments in a way that was easy to get to and easy to move out of the shot.

10/11/17       #5: Jobsite Measuring Tools ...
DS

It's no wider on top than the bottom, that's an optical illusion. It's a laundry stand, available everywhere.

Drying Rack

10/12/17       #6: Jobsite Measuring Tools ...
Alan F. Member

We use a surface tablet with PDF annotator, incorporates pictures and you hang it around you neck. We use template for digital measuring

Surface "field" case"

10/14/17       #7: Jobsite Measuring Tools ...
Pat Gilbert

I use photo measures, recommended by someone on the WW

It's ok, but too slow much measuring.

Mostly I like a drawing.

10/15/17       #8: Jobsite Measuring Tools ...
Gerry Member

We use Imagemeter pro on a Android tablet. I like adding the measurements to a photo as I always seem to miss something when I draw.

It will import measurements from a bluetooth capable laser measuring device and will calculate measurements you missed based on the measurement of a large rectangle in the photo.

10/18/17       #9: Jobsite Measuring Tools ...
Mike Fuson

Measuring tape and angle finder that I store in the door of my truck, and an iPad. I use photo measures which has made life much easier. That’s pretty much all I need. I do all my presentation stuff over email or messenger. I don’t think I could much bring myself to trust a digital measuring device, but I’ve only had one and it wasn’t accurate.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello