Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

amana cabinet door cutter question

10/18/20       
jamien Member

Anyone use the Amana 61272 with 3/4" door stock? The description states for 7/8 to 1" doors and the provided measured drawing does not give enough info.
Open to alternatives, but i like this price point ant the option for 4 profiles.

https://www.amanatool.com/61272-insert-carbide-2-wing-stile-rail-4-3-4-dia-x-1-1-2-x-1-1-4-bore-profile-1-steel.html

10/18/20       #2: amana cabinet door cutter question ...
Bill

That’s an interesting design. Not sure I’m a fan. Will the cope and stick wear out at the same rate? Those inserts also look pricey.

Have you looked at these heads
https://glct.com/sg.html

The photo on the right is the one I am referring to.

With the same head you can buy as many shapes of steel backers as you want.

You can make more than door profiles

It’s worth a look.

Good luck.

Great Lakes universal insert.

10/18/20       #3: amana cabinet door cutter question ...
Bruce H

I think you are barking up the wrong tree. The chances of those cutters working out are almost zero. There is no adjustment for fit of the cope to the style. Look around, you can get a 6 piece set of Freeborn brazed tooling for about $450.00. That will allow you to adjust the fit if needed or replace the groover with one that fits the plywood you are using.

10/18/20       #4: amana cabinet door cutter question ...
Karl E Brogger  Member

Website: http://www.sogncabinets.com

Brazed tooling costs too much.

Stacked insert tooling is still the cheapest and most versatile option.

I'd avoid that Amana set just because it is a two wing.

10/18/20       #5: amana cabinet door cutter question ...
door shop guy

You would find out quickly that you wasted your money the first time you tried to use any panel thicker than 5 mm.

10/19/20       #6: amana cabinet door cutter question ...
jamien Member

Thanks for the responses, though none of these answers directly answers my question about using this cutter for 3/4 stock.

The GLC cutter looks much better and i've requested pricing. I already use stacked insert cutting for 95% of my kitchen doors, which are shaker style. i have a specific application that i would need this for, and i could see using it and the additional profiles on occasion as needed. Not a high use piece of tooling. Only having two wings was a concern. Adjusting the panel size would be a non-issue as i need this for solid wood raised panel doors. Though i do see why the option of changing the panel size would make it more versatile. Again, back to the price point for this specific application.

10/19/20       #7: amana cabinet door cutter question ...
Leo G Member

Took the picture into my photo editor and it said the cutter height was 1 1/2". So I set it at that on my screen and took direct measurements. I'll be pretty close.

10/19/20       #8: amana cabinet door cutter question ...
jamien Member

Leo,
thanks! didn't think of that. seems like from that this cutter is just a bit too big to reasonably do what i need. increasingly i wish tool companies would provide .dxf downloads of their stock profiles.

10/19/20       #9: amana cabinet door cutter question ...
Adam

I’ve got the Infinity raised panel & back cutter. Very pleased. High quality. Crazy sharp carbide.

This set has the profiles I would use most ogee, thumbnail & colonial. It’s a true 3/4”+ set.

Infinity insert door

10/19/20       #10: amana cabinet door cutter question ...
Adam

You should be able to figure out a collar/plastic shim combo so you don’t have to raise or lower the cutter head.

10/19/20       #11: amana cabinet door cutter question ...
jamien Member

Adam,

thanks for the infinity tip. i've stayed away from their stuff since i had several router bits turn out to be junk and i started using more industrial tooling. But for a similar price to the amana cutter,and a one time use, this seems like a good option. it is surprisingly in-obvious the cutters are interchangeable in the head.

i don't need shims or any other jiggery-pokery since i got a digital rise indicator on the shaper. a life changing upgrade. repeatably accurate to .002". it has eliminated tons of scrap test cuts and given me hours of my life back. No major tool enters the shop now if i can get it digital.

10/20/20       #12: amana cabinet door cutter question ...
Adam

I gave up on Amana a couple of decades ago. Back in the day it was seen as the Pro stuff and Freud is for the amateurs. I could walk into the local builders supply and they stocked the whole range of Amana router bits. . The Amana router bits are no better than any others. I would probably buy a Freud over an Amana at this point. The Amana insert tooling is really nice quality. I’ve got a couple of their helical patterns with a ball bearing collar. Amana’s brazeon cutters are nothing special. I would buy a Freud brazeon before an Amana. They have better newer geometry.

Freeborns are like “they are what they should be“. High quality nothing special about the carbide or geometry. Readily available, excellent customer service, fair price, made in the USA.

I wouldn’t buy an Amana saw blade(I’ve had about 6) They have D10 carbide which wears out way faster than C4. It’s obvious.

Just my experience. We’ve been a small to medium shop for 30 years.

10/20/20       #13: amana cabinet door cutter question ...
Scott

I have never used Amana anything I don’t believe, maybe the odd router bit, because Richelieu sells their stuff, most of the router bits I buy are froM Lee Valley, or Frued. I don’t use a lot of router bits anymore.
Most of my shaper cutters are Royce, but like Karl said I would never buy a 2 wing cutter, regardless of the brand. I would also only use insert tooling. I would spend a little more on the cutter heads and they will last you forever. I bought a two wing set quite a few years ago and used it on one job and threw it in a drawer it did such a crappy job. Every time I open that drawer I get disgusted as it was $700 with the inserts.

10/29/20       #14: amana cabinet door cutter question ...
Jared Member

I have a similar head (not the amana) and they work fine. The irritating part is to run the cope face down you have to flip the head and reverse spindle. Running on a small shaper (with any runout or spindle off axis) will cause fitment issues.

I wouldn't want to use it often, but they are cheap and functional.

The dimensions are right there (in metric) on the product page.


View higher quality, full size image (624 X 504)


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello
    Today's Sponsors

    Become a Sponsor today!