|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Ramp speeds and feeds4/19
Just looking for feedback on what people are using for ramping in speeds, feeds and angles on melamine and MDF.
3m a minute across and 8m across then to 18m a minute in the cut
Hi i need diametre of tool and cut depth th help you !
Any length ramp and angle is better than none. I have auto lead let to radius of the tool x8 if there is room. On inside cuts, I get what I can, whether it is straight ramp or combination of straight and arc. default ramp speeds are 1/2 the feed.