|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
We are in process to by a new CNC router -- it have been narrowed down to : GIBEN G4 5x10 and a BIESSE skill 5x12.
Can't speak for the Giben.
But I have a Biesse skill 5x12 and it has been a good machine for us . Cuts solid wood with ease and we nest all of our cabinet parts. What are you looking to cut primarily ?
I've got a skill 5x12 with a sweeper.
Thank you foe response.
We have been looking at the Felder H-08, with sweeperr-5x10, but also like the new Biesse Rover S with sweeper 5x12.
I can tell you about the experience we had with Biesse.
We bought a brand new machine that unfortuantly had an issue that proved to be hard to find. Biesse was great to work with and did everything they could to get us back running. We had a tech stay at the shop and work all labor day weekend. After much struggle Biesse stepped up and replaced the machine. Even after it was decided to replace the machine under warranty they flew a guy over from the HSD the motor factory in Italy to work try to find the problem. He found it and even though they fixed the problem they still replaced the machine and upgraded us for all the trouble.
I would not go anywhere else.
Also make sure your software works with the machine you want. Feel free to email me directly with any questions I can answer for you.