|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Have ya'll had a good experience transitioning from Cabnetware to Cabinetvision? I have to make this decision soon and any feedback would be very helpful.
This is a tough one for me. CW does almost everything I need . and for anything else I use aspire. I wish I could find tech support if I needed it. And I don't very often. Just Im thinking someday something will happen and will have a CNC just sitting there. If I could find support even on a case by case pay as you go I would not make that CW to CV jump. the only winner here is Vero.
John, I myself and quite a few others are not moving over to CV......There is no point CW - S2M does everything I need .....I'm not worried if it not being developed anymore. As for support ....There will be a users support group after April shut down. Just like the old days before Planit Purchased CW.
I'm with Paul S on this one.
After 20 pulse hours working with CV I found to many reasons not to make the switch.We want to work less generating paperwork not more.