HOLZHER 5 AXIS GLOBAL PART ORIENTATION
11/14/18
Hello, We are using Alphacam with our Holzher promaster 5 axis, and this is the first time that we are trying to run a 5 axis program, but I can not remember how Holzher said that they wanted ) values oriented. Is it just a matter of calling the bottom left corner 0-0-0- , or is there more to it?
11/15/18 #2: HOLZHER 5 AXIS GLOBAL PART ORIENTAT ...
Website: http://www.cadcam-softcz.cz
Hi,
it is like this, als depent on a postprocessor setting. But all Holzher what i did set for this zero point
https://www.youtube.com/watch?v=58ucA6O_aTU
View higher quality, full size image (1920 X 1037)
11/20/18 #3: HOLZHER 5 AXIS GLOBAL PART ORIENTAT ...
i oriented everything correctly, but have an odd error.
View higher quality, full size image (1224 X 1632)
11/22/18 #4: HOLZHER 5 AXIS GLOBAL PART ORIENTAT ...
Website: http://www.cadcam-softcz.cz
It is not orientation error.
You have some bug in a code.
Please attach there your NC code and Alphacam file if you can.
11/22/18 #5: HOLZHER 5 AXIS GLOBAL PART ORIENTAT ...
I have a NC Hops program stop in my operations list. I had planned on performing a part flip, but I removed the stop and deleted secondary operations and the program performs perfectly. My machine did not recognize the macro.
11/22/18 #6: HOLZHER 5 AXIS GLOBAL PART ORIENTAT ...
Machine was spelled maschine in macro, one line.