|Home » Forums Ľ Dust Collection, Safety and Plant Operation Ľ Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Upgrading existing dustcollector12/22
Hi guys, I have a blower that has room in the housing for a larger impeller. I was considering increasing the motor one size up and the impeller as well. If it fits is it plausible? Is there a need for extra room in the housing around the impeller?
A collector can only take in what it can exhaust through the filters. Rarely so systems have too much filter. Are you going to increase the filter area.
Hi, yes, adding 60% filter area.
Sorry Correy I canít help with that.
It would certainly pay to stop guessing what will work and do some calculations. You need to calculate based on distance and number of elbows and flex. Plenty of places will help you design the piping and air flow requirements.