Total Finishing Supplies

Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Measuring small batches

5/27/15       
JohnB Member

What do you guys use for measuring small quantities of finishes such as CV etc. that require pretty accurate ratios? I'm talking for the occasional small project or a forgotten peice of crown moling, etc that only needs a small batch. I can't seem to find measuring cups, etc that give individual ounce markings and find myself doing a bit of guesswork at times. I'd prefer something glass that was easily cleanable but would also use a disposable item. The larger quantities aren't as big of an issue.
Also, has anyone seen a container that tapers down near the bottom for spraying with an aaa system? Seems like this would help if spraying a small batch of material, although you still need enough to fill the hose.

5/27/15       #2: Measuring small batches ...
JT Member

Go to your local Feed and Farm Supply or vet supply and pick up some syringes. Leave the cap on the end (or plug it if it doesn't have one) and discard the plunger. I use a 10mil and 20mil for small batches, very acurate. I just run the corner of a paper towel down into it to clean it. Been using the same ones for coming on 2 years now.
JT

5/27/15       #3: Measuring small batches ...
Rick Mosher  Member

Website: profinisher.blogspot.com/

I use a gram scale for my stain formulas and plastic measuring cups for larger quantities.

US Composites

5/27/15       #4: Measuring small batches ...
Tim G

Look in the kitchen isle at W-mart or your local grocery store, they sell glass shot like glasses that go up to 150 mm. Easy to use and clean.

5/27/15       #5: Measuring small batches ...
jimmy cream

medicine dispensing syringes . easily measure 2.5 to 10 milliliters . local pharmacy .

spoons suck for measuring catalyst . I checked some spoons against a cup and against a syringe . the cup and syringe matched ......the spoons did not .

a little safety share when using syringes......when you push the plunger in , the catalyst can eject fast enough to cause a small splash in the paint container . safety glasses mandatory .

5/27/15       #6: Measuring small batches ...
Kevin Member

I bought a digital kitchen scale that will read in grams, mL, and fluid ozs. I use it to measure all my catalyzed finishes. Works great. It stays in a heavy duty ziplock bag to keep it clean.

5/27/15       #7: Measuring small batches ...
jimmy cream

how can a digital scale measure fluid ounces or milliliters ?

5/27/15       #8: Measuring small batches ...
Leo G  Member

Website: http://www.lrgwood.com

I did the same thing as Tim G.

The measuring cup I got was made by Anchor. Pretty durable, takes the solvents and the markings stay put.

5/27/15       #9: Measuring small batches ...
jimmy cream

and how can a shot glass measure up to 150 millimeters ?

geesh , no surprise people have catalyst problems

5/27/15       #10: Measuring small batches ...
Leo G  Member

Website: http://www.lrgwood.com

5 ounces


View larger image

5/28/15       #11: Measuring small batches ...
JohnB Member

Thanks for all the ideas. I never gave a thought to using syringes, we own livestock so we have some on hand usually. I will be checking Walmart too. Thanks guys!

6/1/15       #12: Measuring small batches ...
afinisher

These are good beakers for the money.

Tri Pour Beakers

6/1/15       #13: Measuring small batches ...
Adam

Plastic works fine as long as its PP#5(polypropylene). You can leave acetone in it indefinitely.

Companies that sell fiberglass supplies always have those measuring kind of things.

You can also find reasonably priced things in a supermarket or good drug store.

You can make very good use of some of the plastic yogurt containers for mixing epoxy and finishes as long as they are PP#5.

Personally I would stay away from glass.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)