Total Finishing Supplies

Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Looking for advice from the pros

9/8/16       
Adam B Member

Recently built a couple of knotty alder cabinets to be installed in the laundry room of an existing 8 year old home. We did not have anything to do with the original cabinets (production or finishing). We do not do any finishing at all. After the cabinets were built, we delivered them to the finisher that we use for projects such as these, along with an existing cabinet door that was provided by the client. The idea of course was to match the sample provided. When our finisher told us the cabinets were done & ready for delivery, we noticed that his color matched very well to the sample provided, but we also noticed that the wood grain did not "pop" nearly as much as the original sample. It was almost as if the new finish was "cloudier" than the original. The original sample seemed to have a "deeper & clearer" finish than the newly finished ones that seemed to mask the wood grain. I do know that the original cabinets were finished "on site" during the construction of the home 8+ years ago, while our guy finished the new cabinets in a controlled spray booth environment. I am guessing that different material was used, and I seeking some info from you guys as to how different materials can provide such a close color match, but yet have different "transparency" attributes.

Thank you in advance for any ideas you have.

Adam

9/8/16       #2: Looking for advice from the pros ...
RobertJ

Too many variables, and someone needed to supervise the finish product before the installation. That said, nothing will help now.

Transparency could be as simple as sheen used or ever waterborne to solvent borne.

9/8/16       #3: Looking for advice from the pros ...
kevin

wiping stain vs spray on dye stain.

9/8/16       #4: Looking for advice from the pros ...
Adam B Member

Kevin,

which of those would give the more transparent look?

9/8/16       #5: Looking for advice from the pros ...
kevin

dye would be more transparent. wiping stain is full of pigment that embeds in the grain. it gives a richer look.

9/8/16       #6: Looking for advice from the pros ...
Adam B Member

Kevin,

would you consider a spray on dye stain to be a commonly used product to stain the woodwork in a new construction house? Typically in our region cabinets, mill-work etc is installed in a house raw, and then is all stained/finished together on site by the finishing contractor. Thank you for the help, as I am trying to educate myself on this topic, so that I can have an honest conversation with our clientele.

9/8/16       #7: Looking for advice from the pros ...
Nick

adding age to a new piece so that it looks a old piece I do with dyes and pigment in toners/shaders...I can get it darn close but it's not 8 (or 10 or 20 or 100) years of UV exposure and until someone figures out how to can uv age simulated aging is what there is...darn good? yes. perfect? very rare.

9/8/16       #8: Looking for advice from the pros ...
Paul Snyder  Member

Website: finishing.tips

Painters often add a little stain to the finish to get more color and make it more even/uniform. The pigment in the finish is what masks the wood grain.

9/11/16       #9: Looking for advice from the pros ...
Bart

How large was his sample he did? He could've just got the color right and hit it with a couple of coats to show the client. Or he could've used a laq rattle can over the color. Was a sheen specified? Most guys will use at least 3 -4 coats for final. If he used multiple coats of satin/flat that would explain some of it. Also knotty alder loves to blotch he may have put down a toner and a flatter sheen to even it out.
Is this coming from the client or you? If not from the client walk away.
my2cts

9/17/16       #10: Looking for advice from the pros ...
DanShafner Member

Most end users don't notice wheter or not the wood grain pops or gets subdued. They do notice color mismatch, differences in sheen, different textural differences, and not much else.

If your end user didn't notice then neither did you until they point it out to you.

Pigmented stains will subdue the look of wood grian, especially when applied as toners (i.e., sprayed on). Their use will greatly effect the look of depth and clarity.

Was your finisher only supposed to match ther color? Or did you also specify that the "look" also had to be matched. If you didn't spell it out then (in my opinion) he did his job, he color matched. Though he should have asked you, maybe he did what you paid him to do. He walks a tightrope trying to ask questions about an issue that you (his customer) are not prepared to answer and didn't even know was an issue to begin with. That onus should have been on you to communicate to him to get both the color and the look to match.

10/24/16       #11: Looking for advice from the pros ...
francis

all the answer that you got are good but my guess is that they shaded the colour, when they stain it, they probably notice that the colour was coming out too light so they shaded it with the stain over the seal coat and that made the colour more cloudy and less grain definition.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)