|Home » Forums Ľ Professional Finishing Ľ Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Kremlin 10-14 to 10-c185/14
Just wondering if anyone has gone from a kremlin 10-14 to the 10 c-18. I run two older 10-14 pumps, but feel as though Iím forever rebuilding, replacing etc. With parts prices what they are, Iíve thought recently about two new pumps. One vendor told me the new ones arenít any better than the old, and I would be better off continuing to rebuild. Anybody done this? Thoughts?
Hello the Eos 10c18 has fewer parts and is way easier to rebuild
i agree with Bruce, it definitely has better features with more output, though 10:14 has been working very well for a lot of customers for a long time.
Unless ur piston or displacement rod is scored I would rebuild it
Same goes for the air motor
Air motor on both pumps are the same, imho rebuilding the lower end takes the same amount of time
Good luck herb j
Hello I have both the Kremlin 10-18 and 15-25. I use the smaller pump for all my Bin shellac based primer and the larger for the WB Lacquers. They are great pumps and really like the Xcite guns