Cell Phone Drawer
11/23/14
I am starting two night stands that my clients want to use for charging their electronic devices. The main challenge is wiring the drawers in such a way that the wires that power the drawer plugs move in and out with the drawers without hanging up on the drawers above and below. There is a product called "Drawer Docker" that does solve this problem perfectly but the drawers must be at least 18" wide which does not work for me. I am planning on a scissor arm that wires will mount to that will open and close with the drawers etc. Anyone been there and done that ?
11/24/14 #2: Cell Phone Drawer ...
Whatever you do, just remember that it will be undone and redone multiple times, unless you're cool with the same designed obsolescence routine that the cell phone manufacturers follow.
11/24/14 #3: Cell Phone Drawer ...
Gary, could you use the docking drawer mechanism and mount it vertically instead of horizontally?
12/7/14 #4: Cell Phone Drawer ...
I would never take on the liability of wiring a drawer. This is a potential fire hazard. If I were you, I would speak to a good electrician, and have them do the install on site.
12/14/14 #5: Cell Phone Drawer ...
Pretty sure this is what joe means
Docking drawer mechanism
3/12/15 #6: Cell Phone Drawer ...
Website: http://v-dubfurniture.com
I would never take on the liability of wiring a drawer. This is a potential fire hazard.