|Home » Forums » Laminating and Solid Surfacing » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Round over 1/4" plywood6/4
Trying to find a router bit that I can put a soft edge in 1/4" thick oak plywood. Have bought
Our Easy Edge bit should do the trick. Give us or one of our distributors a call. Part # SE2420 on pg 154 of our catalog
I tried that if the shoulder were the bearing rides was ground down it would work perfect
Ouch, Give us a call. We can help you out on that, just need to know what exactly you need ground.
Use a brass pilot router bit.
Brass pilot router bit