I have a small part time wood working business mainly making rustic pine furniture and wall decor. Big chunky letters to be exact.
My letters have been selling really well. I can wholesale them or retail them at a local vendor mall. I am also exploring other wholesale options-wineries, breweries, home decor shops, furniture store, etc.
I am wanting to go full time. I guess my question is this.
Can I really make it band sawing letters and the occasional bench, bookcase, etc?
I can make roughly 20-40 letters in a day. I have my finish down. While my bandsaw isn't the greatest, it works(grizzley 15".) My overhead is very cheap. I have a wife who is a graphic designer so I could have a kick-azz website and catalog.
I know this sounds a little crazy. Maybe that is why I am a little hesitant. Anyone doing something similar?
9/7/16 #2: Making a living band sawing letters ...
When you say your overhead is cheap, I'm assuming that's because you work out of your garage with no other expenses such as rent and additional utilities.
Honestly, you're probably on thin ice. First and foremost is the need for liability insurance. You're selling consumer goods and you have to consider the need for product liability. The letters aren't an issue, but any of the furniture you mentioned puts you in a different category. Ever make anything that could be used for children? You're in even deeper. Using part of your home for manufacturing? Your homeowner's insurance won't pay for any claim relating to damage caused by that venture. In other words, to do it right your overhead WILL grow.
Do an honest assessment of true overhead (insurance, utilities, work space, equipment), determine exactly how much it cost to produce each piece including material, labor, delivery, etc., and how much real profit you make off each piece. Then decide how much money you expect to make in this business. If you want to make $2500 a month and your true profit is $1 per piece, you'll have to produce 2500 per month.
9/7/16 #5: Making a living band sawing letters ...
Thanks Bill. Yes, ins sucks. The health ins side of it scares me more than anything. I have it available through my wife's work, but its crappy and costs more. I do have a rough estimate on all of this, but planned on doing a full evaluation before going full time.
And just to be clear, I do plan on making more expensive, furniture peices as well as the letters.
9/7/16 #6: Making a living band sawing letters ...
The reason that you compete well with the CNC letters is that you are too cheap. By Bill's estimate, you are 1/3rd the price you should be. Don't feel bad, that is where everyone starts.
It is better to get the reality dose before you take the leap.
Single man shops can only thrive with a niche - usually a skill or something that can't be done in China or by a CNC. A shop that tries to beat Home Depot cabinets or Ikea furniture will die quickly.
Another thing that happens is the local cabinet stop lays off, or someone flunks a drug test, and the next week he is 'in business' - competing against you. He may be dumb, but if he is cheaper - can you outlast him?
9/7/16 #7: Making a living band sawing letters ...
With all do respect, how would you know? I havent posted prices or my competitors prices. I maybe too cheap on a few things, but i havent made too many things that i could charge 6x's materials on a very easy peice. This is a serious question- If you have a 200 dollars in materials on a very simple cabinet, can you charge $1200? I know the analogy is not linear but you get my point. And no I do not price that way. And if you can charge that much, good for you.
I dont think you get anymore niche than rustic letters. Not really competing with the really cheap letters at Michaels and such. Mine are a little different and solid wood. And people like that its cut by hand. I guess they like the idea of somebody doing it instead of a machine.
Worrying about if someone is cheaper is kinda silly. There is ALWAYS someone cheaper.
And again, I will be making other stuff. Just finishing a $850 dollar table for instance.
Thanks for all the advice guys.
9/8/16 #8: Making a living band sawing letters ...
Maybe a dose of reality if you use the table for $850 as an example ,, figure out how much in materials went in including finish and calculate your hours spent and whatever overhead costs and any others .
What is left ? well , it is mostly labor prolly with very little if any profit not to be confused with labor that's your hourly wage , profit is above that .
9/8/16 #9: Making a living band sawing letters ...
Most people just starting out vastly understate their real costs. After a few months of making minimum wage, they wise up and either get out of it, or learn what needs to be done to make a living wage. Just saying'.
As D Brown says add up all your direct costs, all your materials and labor. Materials are to be figured at replacement cost, not the stuff you had just laying around. Then something for consumables - sandpaper, etc. Then utilities and phone and rent and insurance, and about $30 per hour for your wage and taxes. Round up if in question. The trip up here is what you omit - you don't know what you missed, so be thorough.
I do not know of any one man shop that can do anything for less than about $58 per hr, where the owner takes a wage of 50k or so. I have worked in a 2 man shop off and on for 26 years, and my hourly rate I charge is now 85 to 95 per hour. I buy wholesale, and mark up materials. We will do about 350k this year.
This is a strange business where so many starting out get defensive when told they do not charge enough. I don't know why, but many of us start that way, way too cheap, and not wanting to hear that we are not charging enough. Maybe psychologically we are protecting the fact we can generate some money, and afraid if we charge too much, that will all stop.
9/8/16 #10: Making a living band sawing letters ...
Sure you can make it. IF, you are willing to live on what you make. You might end up selling you home and living in one of those $15,000 little homes on a double axle trailer they like to show on TV. Oh yeah, probably have to give up the TV. You may have to drive 20 year old vehicles that you repair yourself. You may have to raise your own chickens and grow your own vegetables. Maybe that is the way you already live, I don't know. But if there is the will, there is the way!
9/8/16 #11: Making a living band sawing letters ...
Can you sell and produce enough to show a $75k a year profit before taxes, after paying legitimate overhead? That includes paying insurance, health insurance, business license fees and equipment depreciation?
If not, keep your day job.
9/10/16 #13: Making a living band sawing letters ...
Adam - Thanks for agreeing with the observation I made about the mindset of beginning independent woodworkers. Those of us that have been there can easily spot it in others. You are right - most of us have spent some time like that. Recognizing the problems that attitude brings is a product of rigid self examination, and determined stripping away of non productive notions. Maturity.
Many times here on Woodweb, or standing in someone's shop, I hear the same things about overhead, misunderstanding market size, and the defense of product and prices. While the person asks for help of either general or specific types, once defensiveness enters the conversationan, reasonable learning stops.
9/10/16 #15: Making a living band sawing letters ...
Hey guys, just wanted to give you an update. I decided to go 100% wholesale. I is just easier this way. I currently am have 5 dealers. I have a plans to increase that to 10 by the end of the year. 10 would pretty much saturate my area, and then I would have to move to a market a little ways down the road. I have, in theory, I shipping/delivery schedule in place to service said dealers 1-2 times a month. The second market is considerably bigger, so the potential is definitely there.
I have also developed a long term plan of "specialty" items that I could sell to unique stores. Such as special items for floral shops, kids stores, etc.
As for a making/selling enough product to make a living, I am still getting my head around that part. So far, it is very feasible.
Anyways, that is about it. Hoping to be full time soon!!!
11/10/16 #17: Making a living band sawing letters ...
You asked for advice and got excellent feedback from a number of very thoughtful individuals with decades of experience. Two months later, with virtually no experience, making slightly more than minimum wage, you're riding a high horse proclaiming how misguided their responses were, yet you acknowledged your prices are already too low to cover an expense as nominal as bandsaw blades...smh.
11/10/16 #19: Making a living band sawing letters ...
Pete, The 4 things I listed above, Do you consider those excellent advise? And I am far from "riding a high horse" and have many, many doubts. I am also far from minimum wage. And yes, bandsaw blades are cheap... when you are say making an expensive veneer for an heirloom pieve of furniture. That is not what I am doing so the dynamics change a bit. I really had no clue how quick they went dull until I started making hundreds of the thick letters. I just never did it. Just wanted to give an update and had a few more questions.
To the useful posts, I am greatful. Sorry if I come off defensive, but so many posts turn into your to cheap, expensive, etc. without knowing a ton of factors. I just get tired of reading it.
So, If we could move on from the "too cheap topic", I do have some more specific questions now that I am into this a little more.
So I have been moving more and more expenses from personal to the business. New computer, Disposal, gas, etc. One thing I haven't really came up with a solution for is "rent". What is a fair arrangement? What do I pay myself for the building? It is small and not too fancy, but it gets the job done for now. Didn't really use it before. I live in the country and property is pretty cheap where I live compared to a more metropolitan area.
I have an Idea on how to derive a number, but thought someone could shed some light on this subject?
The second question is this- While the stores that carry my product are really neat little stores, they are just that. Little. I don't believe any of the will provide "steady" orders. The second market I plan on going after theoretically probably has a "big fish" that could provide steady orders. How should I approach them and what should I expect?
Thanks in advance.
11/11/16 #21: Making a living band sawing letters ...
Actually I do consider the posts you refuted to be good advice. David elaborated on the concept of pricing in a very articulate way and the others echoed a similar sentiment. There's a reason for the repetition behind the comments about pricing and knowing your costs because it's the difference between growing a business and going out of business. The only thing that's apparent is you have no clue what your costs are yet and you're not even close to scaling up your operation in a way that will keep you profitable. You're smart to acknowledge the small specialty stores won't keep you afloat, but in order to make higher volume and get your product out via wholesale channels that takes a lot of additional work outside the immediate task of making the letters. Those are hours and costs that need to be factored into the pricing structure. Want to get a booth at the NYC trade show and get in front of thousands of vendors/potential customers? The small booth is 10k plus travel expenses with no guarantee of sales. What about when sales go flat? Unforeseen overhead? Being enthusiastic, optimistic and excited about your venture is important, but if you're not grounded in the reality of your cash flow you're going to struggle...then again you think operating a business at $15/hr is far from minimum wage.
11/11/16 #22: Making a living band sawing letters ...
Pete, I also find Davids response helpful. Which I am greatful for. I don't know how many times I have to thank the useful posts. Please, read the 4 above. These are just silly. "make 75,000/yr or keep your day job"? I can say with great confidence, there isn't 5% of my community making this. Probably not 3%.
You guys keep telling me I don't know my cost, and I keep giving you examples of the cost I have already figured in. Insurance, utilities, travel, etc.
The questions I asked are to further determine my cost, as you know, I am not full time yet and am still developing my business plan.
You guys are acting like I shouldnt make a thing until I have enough business to go full time and have every detail nailed down to the cent. Its just not reasonable.
I have developed a customer base, delivery, website(almost done), future ways to build business, working on nailing down costs.
I have also developed multiple ways to increase yield per board, fine tuned finish schedule to reduce labor, Looked into different things I can charge more for, etc.
And the only thing this thread has focused on is that I am too cheap. Which by the way, no prices have ever been posted.
My apologies for wasting everyones time. I will seek advise elsewhere.
Have a good one.
11/11/16 #23: Making a living band sawing letters ...
The essence of the feedback is the same...it takes a lot more profit than one expects to sustain a business and no one can give you specific numbers based on you're location, product and salary. If your prices are already too low to offset the cost of bandsaw blades that validates every response you got. Don't get so defensive, what you're trying to accomplish is very difficult and no advice regarding a business startup will be laced with rose petals and honey. If you can make it work, more power to you.
11/11/16 #24: Making a living band sawing letters ...
Hey guys I looked for advise somewhere else, but it turns out we are the only one in the USA that still make stuff. LOL.
So, Pretty please, can we move on from the "your too cheap thing"? I have done time studies on every part of the process and everything still comes back positive. I have looked endlessly for a product that would compete with mine, came up empty.
My biggest thing is this- I can make enough per week very easily. How do I sell that much? I have thought about hiring a salesperson. There is enough meat there, I could probably absorb the cost. Just very leery of having someone else represent me.
Also, Has anyone done markets(gift)? I have one that is close enough, just don't know if its worth it?
Thanks in advance.
8/8/17 #26: Making a living band sawing letters ...
Can anyone help me? Or is my business model not fit this forum? Just to be clear, I am close to full time. Have 40+/- dealers of my products in 5 states. I have a product that sells, and need some advice if anyone has it.
As I keep getting bigger, Its getting harder and harder to find time to establish new dealers. So I think I have a few options and was wanting your input. Here they are-
1. Show at Atlanta gift market. This is the most costly option. $8000+/- My main concern is that I wouldn't be able to fill all the orders. Also, opens up the shipping side of things, as I deliver everything now.
2. Show At smaller regional markets. This is certainly affordable enough, but I am afraid that it wont establish the long term relationship that I am after.
3. Hire a salesman. This, I know very little about. Especially from a gift/boutique side.
4. Keep grinding it out. Doing it myself.(lots of hours)
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.