|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
HDF verus MDF plum creek2/7/20
We make cabinet door out of mdf what is the advantage and disadvangee of using hdf in this . I havent cut but one small piece of hdf but it seen to cut good and sand . We will making one piece srp door. Using plum creek material. Thank
We use Plum Creek. Have tried many others and it is the best we have found. We make about 50-150 doors per month.
I should have wrote Hdf plum creek versus Mdf Plum creek compare which one is better,
Call Plum Creek.
We used HDF for awhile. Thought it was great. Painted much better (easier) and the edges were a lot harder.
I have used thousands of sheets of the HDF over the years. There is a big difference between the HDF and MDF when milling doors. HDF paints better and mills and sands better too. The downside is you have to lift it.