This was removed from a Homag KDF 1440 also known as an Edgeteq 4.4 and how S-300
Return length is 200" This does not include the length of the transfer area. This is the length that will match the edgebander length. It should be a bit short so you can stand in front of the machine and feed material.
Workpiece data
Workpiece length; 300–2,500 mm
Workpiece width; 50–1,450 mm
Workpiece thickness; 8–60 mm
Working height; Adjustable 835–960 mm
Feed speed 8–25 m/min
This machine was de-commissioned by a tech and we have all the electrical/electronic hardware needed to run this machine from the Homag edgebander control.
MachineryAssociates.com listing
