This is Gomad Model DFDA-4 shaper with a tenoning table that is really really good shape. I have seen my fair share of these and I am not sure where this one was hiding but it is well taken care of with a Newer Baldor motor and belts.
7-1/2 hp, (Baldor) 208-230/460 volt three phase drive motor
Belt drive to spindle arbor with step pully drive system
4,000/6,000/8,000/10,000 rpm spindle speeds
Interchangeable spindle arbor capacity
1-1/4″ diameter spindle arbor on machine with 5-3/4″ under the nut capacity
36″ wide x 40″ long machine work table
32″ wide x 14″ long sliding work table
Full length table fence with 0 to 90 degree swivel
Manual height adjustment of spindle
Bottom foot brake pedal
Forward/reverse motor switch
Made in Poland
This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.
Link to more images and info at 360
