Description
2007 fulltech, the control is basically the same as a Fanuc type. We are original owners and was bought new in 2006, delivered in 2007 from MFG. Machine is a full 5ft x 12ft machinable vacuum table, ride along 8 position automatic tool changer, dual drive motors on x axis. Router is a 24,000 RPM max, we run it at 19,000 most of the time and it is the original motor. This machine was used in a specialty plastic shop; it was never used as a production machine. Still in good working condition and actually still plugged in and I am cutting parts with it today. It is networkable and will come with the newer laptop which allows it to network. Obviously, you can also use USB drives to load programs this way as well. We will load your truck, weight on this unit is about 11,000 lbs, and we still have all the original bolt on shipping braces we will install for you. Would sell dust/chip collector too with forkliftable bin hopper for $8,500 if interested. Collector is a Bellfab unit and does have on/off controls integrated to this router control stand.
Thank you for looking
