Description
Electrical: 400v, 22amps, 11.9kW, 60hz, 3ph, Weight: 1750kg
Stations order:
▪ 1st. Coil Feed Table
▪ 2nd RT02 Pre-Mill Unit. (2) 1.8kW motors. 12000rpm. (Includes anti-adhesive spray unit.)
▪ 3rd. SP03 Glue Application, w/ AdIRL-700 Infra Red Pre-Heat Lamp
▪ 4th. IT03 End Trim. 0.8kW Saw Blade Motor
▪ 5th. RF02 Top and Bottom Trim. (2) 0.65kW motors. 12000rpm
▪ 6th. AR02 Corner Rounding. (2) 0.65kW motors. 12000rpm (Includes sliding liquid applicator)
▪ 7th. RB02 Top and Bottom Edge Profile Scraper (Manual adjustments between 2 profiles)
▪ 8th. RC02 Top and Bottom Glue Scraper. (Finishing unit with flat blade knives)
▪ 9th. Top and Bottom Buffing. (2) 0.37kW motors.
Equipped with P1-Airforce Hot Air System + Shop Fox 3HP Cyclone Dust Collector
Approximately 6kWh power consumption
Condition: Very light use, for light sample making / R&D only.
Biesse technician installed and serviced
