K360 ERT-1 HP Servo machines are equipped with: RT-VP Pre-Milling Unit 2 × 2 HP motors 19,000 RPM Diamond cutterheads EVA Glue Pot Teflon-coated Approx. 8–12 minute heat-up time End Trim Unit Automatic pneumatic positioning Radius and straight trimming Top/Bottom Trim Unit 2 × 0.7 HP motors 12,000 RPM Corner Rounding Unit Diamond cutterhead Automatic changeover for thin tape and 3 mm PVC Profile Scraper Glue Scraper Buffing Unit Servo-Controlled Electronic Axes The HP Servo model allows electronic positioning of key stations through the touchscreen. This reduces setup time dramatically when switching between: 1 mm PVC 3 mm PVC Wood edging Different panel thicknesses For a custom cabinet shop running mixed jobs daily, the servo package can easily save 15–30 minutes of setup time per day compared with manually adjusted machines.
In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.
