Owner relocating, couldn't take machine with him.
One owner Cantek edgebander.
Hot melt gluing unit with digital temperature displays
Teflon coated glue pot
Heated infeed fence
PLC machine controls
2 roller pressure section
Single motor end trim unit running at 8800 rpm with 2 saw blades
Top-bottom flush trim unit running at 10,500 rpm with insert tooling
Radius scraping unit with 2mm radius
Buffing unit
230v single phase; 25 amps (Total connected power 5HP)
Track speed: 23 FPM
Min Panel length: 3 1/2"
Min Panel width: 3 1/2"
Strip-coil capacity: .4mm - 3mm
Mechanical digital trim adjustments for easy set up
Cantek single phase edgebander
