Description
This model has the 3800mm wagon, over 12 feet long.
The main motor is approximately 12 HP, and the scoring motor is 1 HP. Both are original.
The outrigger on this machine appears to be one from a 3200mm wagon, and someone adapted it to fit. It works well. I also have an extra outrigger, similar but unmodified, which would be available.
The machine is currently wired for 230v. It was 460v when I got it, and could easily be changed back.
I also have available an extra main motor, scoring motor, and electrical panel which came from another SI 400 Nova. The extra main motor is smaller, so it could be used as a backup, or as a replacement to reduce the size or power requirements.
The crosscut fence is the telescoping design that extends for extra width.
I have the original manuals that came with the machine.
The rip fence has the DRO option, but I do not have the magnetic scale for it.
Aesthetically, the machine could use some fresh paint, but it is in very good operating condition. It passes the 5-cut test for square cuts.
The machine is in my hobbyist shop and can be demonstrated under power. I have equipment to load onto your trailer. It’s also possible I could deliver this machine for additional cost, depending on distance and the unloading situation.
