Description
HOMAG EDGETEQ 4.4 Servo industrial edgebander available for sale due to a manufacturing facility relocation.
Equipped with advanced servo-controlled processing stations, pre-milling, multi-profile trimming, corner rounding, and EVA/PUR glue capability.
**Machine features:**
- 15.6" powerTouch full-HD touchscreen control
- Motorized top pressure beam adjustment
- Automatic feed track lubrication
- Workpiece preheating
- Servo-controlled infeed fence
- Two-motor joint trimming / pre-milling unit with diamond insert cutters
- QA-65 N hot-melt gluing system for EVA and PUR adhesives, with quick purge
- Automatic coil and strip feeding
- Three-roller pressure zone with motorized positioning
- Double-motor end trimming with programmable straight and 15° chamfer capability
- MS 40 servo-controlled fine trimming unit with four selectable profiles: two radii, bevel, and flush
- Automatic corner rounding with two programmable edge thickness positions
- MZ 40 multi-stage profile scraping with servo-controlled tracing
- Finish scraping unit
- Two-motor top and bottom buffing unit
- Enclosed processing stations with safety interlocks
- Integrated multi-voltage isolation transformer
**Technical specifications:**
- Feed speed: 26–46 ft/min (8–14 m/min)
- Feed speed with corner rounding: 36 ft/min
- Edge thickness, coils: 0.4–3 mm
- Edge thickness, strips: 0.4–8 mm
- Workpiece thickness: 8–60 mm
- Minimum workpiece length: 160 mm (250 mm with corner rounding)
- Minimum workpiece width: 70 mm
- Machine length: 18 ft (5,573 mm)
- Machine weight: approximately 4,080 lb
- Electrical connection options: 208/230/440/480V, 3-phase, 60 Hz
- Dust extraction requirement: approximately 2,036 CFM
- Compressed air requirement: 12 CFM at 87 PSI
**Important:** Installed pre-milling diamond tooling is rated for workpieces up to 40 mm thick. Optional tooling is required for 60 mm pre-milling.
Machine is located in Marion, South Carolina. Available for inspection by appointment.
Buyer responsible for disconnecting, rigging, loading, and transportation.
Full five-page HOMAG technical specification available upon request.
