You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Any of you guys do solid surface?

Mike Fuson

The only kind of countertops I do currently is laminate. Most of my clients are getting granite these days which I sub out. I have been entertaining the thought of offering solid surface and have watched some YouTube videos on it. I was wondering if any of you guys do it and is it lucrative and worth doing, or lucrative yet not worth it, is there much of a demand for it, worth the investment of tooling, the training? Thanks

11/21/15       #2: Any of you guys do solid surface? ...

I don't do it but will be interested in the replies you get. I almost tried it last year on a commercial project but a friend talked me out of it. He said he hated working with it b/c it created a fine dust that got everywhere, and I guess was much more a PITA to deal with than sawdust. So I ended up subbing it out and just tacked 10% on to their price.

Not sure I'd want to invest unless your sure you have a market. Around here it's either natural stone or artificial stone for residential.


11/21/15       #3: Any of you guys do solid surface? ...
Pat Gilbert

That is interesting. In Calif no one does laminate or solid surface except for commercial. Stone is the lion share of residential. What state are you in?

Anyway solid surface is no big deal and not much of an investment. The bigger question to me would be how much demand there is for it.

11/21/15       #4: Any of you guys do solid surface? ...
Mike Fuson

I'm in Ky Pat. It's all about the clientele here. Average kitchen that I'm doing here the granite is anywhere from 7 to 11k. I'm not ready to get into it by any means just gathering info about it. I do think that I could replace some of the laminate work with it assuming it's more affordable than the stone...

11/21/15       #5: Any of you guys do solid surface? ...
Pat Gilbert

That is just it. It is not less that stone(YMMV). Stone work is quite competitive. You may consider subbing out the stone and just do the installation.

11/22/15       #6: Any of you guys do solid surface? ...
hen bob Member

In my area, Chicago . I'ts all stone or man made stone, very little laminate.. I used to have a fabricator that did solid surface but he closed his doors.. From my understanding that solid surface was more expensive than granite by quite a bit...

But in Chicago there are so many granite guys its almost comparable to laminate, for the easy stuff that is...

11/22/15       #7: Any of you guys do solid surface? ...

We do less SS than we used to. A lot of quartz is being done in commercial. About the only SS we do now involves thermoforming or resin inlay.

11/22/15       #8: Any of you guys do solid surface? ...
Mike Fuson

Thanks guys. I've done heard enough to turn me away from the whole idea.

11/23/15       #9: Any of you guys do solid surface? ...
Dave Zammit

I've been doing SS work for about 5 years now. I just bought a thermoforming oven today!

I've got a stand-alone furniture product that is primarily laminate, but about 15% of the tops are SS. The prices I get for the SS tops I do are REALLY good.

Like another poster said, it's pretty basic stuff. You don't have to buy any new equipment. Just cut it, glue it, and sand it. If you have the opportunity to do that work, there's no reason not to price it high and give it a try.

11/24/15       #10: Any of you guys do solid surface? ...

Depending on how much labor you want to spend: Saw blade designed for SS, 3.25 hp router +, sink round over bits for SS, orbit sander, adhesive dispenser, lots of spring clamps. One step up: 2nd router, coving jig & bit, 11" sander & supplies, higher quality sanding discs. Next step: vacuum sink mounting system, a way to cut precise miters so you can miter fold edges instead of the layering (a CNC router works well also allows nice resin inlay work, need software too.) Next: An oven for thermoforming, silicone membrane for your vacuum press. And last but most important a stream of work to pay for your system. It is a neat material allowing great design work. When sold as a designer material it has an advantage over stone & quartz. Simply sold as another choice in counter tops, it's a hard sell.

11/24/15       #11: Any of you guys do solid surface? ...

we slam the stuff out daily. What is it that you want to know ?

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)