You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Looking for Edge Sanders

Puzzleman Member


I use 5 edge sanders in my operation. I have been using the entry level ones from Grizzly with 1.5 hp motors. I have been burning up the motors in about 2 years. We use these constantly throughout the day and are the main workhorses in our sanding operation.

I use the Grizzly's as they have a short belt (80") which is still a little long for my operation.

What do you use or recommend that can be not over an 89" belt but is more robust than entry level?

Am planning on buying at least 3 but could be all 5 depending on the pricing, availability and any deals for multiple purchases.

9/6/18       #2: Looking for Edge Sanders ...
Larry Schweitzer

Have you been replacing the motors with good ones (not Chinese?) Maybe you should use a 2hp motor? Why the requirement for short belts? Longer belts run cooler, machines with longer belts also are available with oscillation for longer belt life.

9/6/18       #3: Looking for Edge Sanders ...

a friend of mine got the felder last year and loves it. Pricey though at around 10K


9/6/18       #4: Looking for Edge Sanders ...
Puzzleman Member

2 reasons for the shorter belts.
1. The longest product that I will sand is 19 inches long.
2. Operate out a small building, so space is at a premium.

The motor shaft has a taper that connects directly to the drive roller. I have talked to others about doing that but I am getting pricing of over $2.5k for one motor.

I am looking at one from Baileigh. With a 4hp motor.

Any opinions about Baileigh?

9/6/18       #5: Looking for Edge Sanders ...
Dan / drbwoodworks

Try one with a 3 phase motor. One of our table saws that gets used all day every day is a single phase and burn motors in it . But the 3 phase machines never have problems just that one single phase sawstop

9/6/18       #6: Looking for Edge Sanders ...

I've had the Grizzly 108" oscillating edge sander for 15 years. I couldn't be happier.

Oscillation is a must. The 80" sanders have no balls, are light, and the belt is too short.

We primarily use it for fitting inset doors. The drum attachment actually works as well.

oscillating edge sander

9/7/18       #7: Looking for Edge Sanders ...
Larry Schweitzer

Baileigh sells Chinese stuff.
It might be possible to have an adapter shaft made so you could run decent motors. 3 phase is far better, motors last almost forever. I've seen the Felder sander, very nice. I've got a Grizzly oscillating, with a 9"x138 belt that has been pretty good, 5hp, 3 phase! Same sander was sold as a Powermatic for another $1000.

9/7/18       #8: Looking for Edge Sanders ...
david zaret Member

not sure if your budget allows it, but i just got a kundig, and it's a terrific machine. oscillates, has a jointer fence for precision removal... and is built like a tank. a bit more expensive though....

9/7/18       #9: Looking for Edge Sanders ...

We bought a Vega and have been very happy. Built like a tank

9/18/18       #10: Looking for Edge Sanders ...
Puzzleman Member

Thanks for feedback everyone.
Bought a Vega with the oscillating feature.

Have had it for a couple of days and it is wonderful so far. Love that is moves up and down a full inch instead of a 1/4" like most of them.

Delivered in 2 days with free shipping.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)