Company Name: Crow's RidgeThis is a 3'0" x 7' door. It can be trimmed down to a 6'8". It is mahogany and the inlay and horse are spalted maple.
The hardware can be either left or right swing.
Thanks for looking.
Chris
| Social Media: | Tweet |
| Posted By: | Michael Alton |
Very cool !!!
If I were you, I would show it off as much as I could.
| Posted By: | Brian Sheldon |
Very cool, how long did the carving take to produce?
| Posted By: | Chris Crow |
First, thanks to the staff for posting the picture. I couldnt get it to load.
Thanks for the comments. The horse took about 4-5 hours to carve and sand. I took another 2-3 hours with waterbase poly to seal it, so it ( the maple was semi-green) would dry slow and not check.
Its been 6-7 months and no cracks.
Chris
| Posted By: | Daren |
First off, nice work. Secondly if you can do work like that (the carving part) in 8 hrs, I tip my hat. That door would KILL in my neck of the woods $. I have plenty of dry wood for a guy with your talents to chip away at, and a customer base...just not your carving skills. Good job.
Daren
| Posted By: | Chris Crow |
My Buddy Bob does the carving. He is amazing. I got the wood and he carved the horse. He can carve anything! I wish I had his talent. I just do the woodworking.
Oh, he does that carving with a chainsaw by the way. Then some projets may get finished with a Dremel or a torch or sanding. He just looks at a piece of wood and goes at it!
Chris
| Posted By: | Daren |
Well, that was different. Bob's work is great. Good job...Bob.
