Colonial Cupboard

Listing #374 Listed on: 07/08/2006 Name: Bob W

Company Name: WoodmastersThis little cabinet is based on a late 18th-century original and described by Windsor chair maker Mike Dunbar in an issue of Fine Woodworking magazine about five years ago. In addition to being an attractive piece, it’s a useful size for storage—about 3 feet tall, 2 feet wide and just under a foot deep. And the dimensions can be easily modified to suit various storage requirements without distorting the basic design. The cabinet was a tutorial on joinery requiring at least 8 types of joints: dovetails, dadoes, rabbets, shiplaps, miters, panel-in-groove and mortises and tenons (both blind and through).
I’m posting several photos taken as the project developed-- always thankful to have your insightful feedback.

(No images available for this project.)
0 Photos
Social Media:
Viewer Comments:
Posted By:Doug

It's a beautiful piece. Are there plans available? I'd like to try one as well. It looks great .

Posted By:kderby

The article by Mike Dunbar in Fine Woodworking has the details. I saved the article but don't know where it is...imagine that.

Pine is my favorite. Hands Down!!! Thanks for the post Bob. That piece will be a legacy.

KD

Posted By:Bob W

Thanks, Doug and KD. I came across this piece while perusing old issues of Fine Woodworking at our local library. Since then I've discovered that the issue (# 151) is available at the Taunton site
It's also available for download by purchasing a subscription the the Fine WoodWorking site. As with most Fine Woodworking articles, some information is left to the imagination, but there is adequate data to build the piece. Hope this helps. As Norm says, "This was a fun project to build."

Posted By:Will

Bob,as far as the finish is concerned,did you say that you used milk paint,then sprayed a coat of dewaxed shellac over that and then 2 coats of pre-cat lac? Why? Didn't it change the color of the original dried milk paint from a dullish green to brighter green?

Posted By:Bob W

Good catch, Will. I left out the part about a coat of oil, which was applied onto the milk paint. According to Dunbar, oil evens out the color and, at least in this case, brought some additional depth to achieve just the color shading I was hoping for. I let the oil cure for several days before spraying the shellac.

Posted By:Woodtick

I think that's a great cabinet design and your work looks outstanding. But I have to tell you I would have chosen a different finish. Just my personal taste though. Nice work.

Add Your Comment:

*Enter the correct numbers into the field below:

Date of your Birth:

WalzCraft Original Saw