A rubberwood primer

      Rubberwood's machinability and comparability to teak. January 31, 2001

Has anyone ever machined rubberwood? I am pricing a substantial quantity of rubberwood pieces and would like to know how tooling holds up, how the wood holds up, if I need to climb cut, and any other tricks.

Forum Responses
Tooling holds up well. Birch is comparable for workability.

The rubberwood we usually see machines extremely well. But I've seen rubberwood in Asia which was either poorly dried or contained excessive tension wood. Many manufacturers there treat green rubberwood in enclave to avoid staining--I suspect this may effect quality of drying. I suggest you bid assuming no problems, but advise your customer that quality/yield/price may be affected if wood is found to have problems.

A second question was posted on this subject:
I am trying to choose rubberwood or teak for dining table and chairs. Can anyone compare these?

Plantation rubberwood is substantially cheaper than teak, which is restricted for logging. That's why rubberwood is widely used in Asia for manufacturing furniture and other wooden utensils, hugely supplying Europe and the Americas. Newly planted teak is not the same in appearance and quality as the hundred-year-old, rainforest-logged teak. Teak is one of the few species that is not affected by insects and weather, mold, etc.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Lumber and Plywood

  • KnowledgeBase: Lumber & Plywood: Buying

  • KnowledgeBase: Lumber & Plywood: Wood Identification

  • KnowledgeBase: Primary Processing: General

  • KnowledgeBase: Solid Wood Machining

  • KnowledgeBase: Solid Wood Machining: Tooling

  • KnowledgeBase: Wood Engineering: Wood Properties

  • KnowledgeBase: Knowledge Base

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article