Choosing Glues for Flexible Veneers

      Different types of glues can be used, but each requires that the proper technique be followed - 1998

Q. I want to coat mahogany lumber core plywood AA2S with paper-backed flexible mahogany veneer for a two-face match using hot hide glue. Can you get me references for technique or suggest an alternate scheme?

A. There are a number of options available when applying backed veneers. The largest consideration is the type of equipment you have available.

If you have a small shop without a press your best bet is to use contact cement. This is really the best way to apply backed veneers without the aid of a press. The only drawback is that the bond is immediate. You won't have any time to position your pieces.

All other adhesives really require the use of a press. Presses vary from simple vacuum bag presses to complex multi-opening hot presses.

Vacuum bag presses are relatively inexpensive and can be used for a wide range of applications. When using a vacuum bag press with a backed veneer, most PVAs (white or yellow glues) will do a very good job. They allow for positioning of the veneer on the substrate and only require pressure for 30-60 minutes.

Hide glue could also be used in this situation but it wouldn't really give you any benefits over a PVA. It's probably is not a good choice for this application because it: has to be heated, smells bad, is not resitant to moisture, and offers no appreciable heat resistance.

For larger applications involving hot presses or multi-opening cold presses, a urea resin/catalyst system is ideal because of the bond quality developed.

Finally, as long as you are using backed veneers there are many adhesive options open to you. If you decide to use raw veneer, urea resin is the best choice.

Jeff Pitcher is Marketing Director for Custom-Pak Adhesives in Newark, Ohio.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Adhesives, Gluing and Laminating: Glues and Bonding Agents

  • KnowledgeBase: Adhesives, Gluing and Laminating: Gluing and Clamping Equipment

  • KnowledgeBase: Veneer: Machinery

  • KnowledgeBase: Veneer: Processing And Manufacturing

  • KnowledgeBase: Veneer: Techniques

  • KnowledgeBase: Knowledge Base

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article