Glue Type and Veneer Movement

      A complex veneer pattern may move noticeably in relation to its substrate more noticeably, if the adhesive is flexible. January 28, 2014

I built a dining table for a client roughly 42 x 108 that was basically a half circle shape with fanned veneers. The material was a paper backed quartered anigre over a double layered MDF veneered both sides, vacuum bagged with powdered veneer glue from a major supplier. The finish was done by a local cabinet shop of his choice in a matte finish.

After a couple of years there are some lines visible in the joints of the veneer if you get in the right light. He had the cabinet company refinish it once because sitting at the table in his penthouse condo in front of an all glass wall you see every imperfection, or at least he does.

The original discussion I had with him I warned him wood is wood and there will always be some movement. He wanted me to build it of solid lumber originally. Can this table be expected to remain perfect with a marginal finish in front of glass windows and of that size?

Forum Responses
(Veneer Forum)
From contributor T:
The glue between the paper and the veneer is a PVA type, which is soft. It will always be on the move more than raw veneer using PPR glue.

From the original questioner:
So your suggestion is unbacked veneer for this application?

From contributor T:
Yes, in my opinion if one was going to use paper back it would be for making paneling and not a layup face.

From contributor J:
Modern softer adhesives focus on flexibility while maintaining grip (for better or worse). Old school used the only glue they had - hide glue, meaning rock hard inflexibility up to about 400 degrees!

If the table is exposed to any direct sunlight you can expect problems no matter what. You're lucky you didn't make it from solid wood pieces (as the owner suggested); it would have been back in pieces by now.

From the original questioner:
The customer is one of those guys, never happy. The table still looks fabulous, and you really have to get down at an angle to see the seams. I think based on the size of the table and the pie shaped veneers, any method of glue, backed or not backed, was bound to show some expansion and contraction. The finish in my opinion didn't help matters either - looked very thin and kind of cheesy from day one.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Adhesives, Gluing and Laminating

  • KnowledgeBase: Adhesives, Gluing and Laminating: Glues and Bonding Agents

  • KnowledgeBase: Veneer

  • KnowledgeBase: Veneer: Techniques

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article