Timetable for final processing of walnut
Stock in cants form should be processed in a timely manner. March 26, 2000
We have about 10,000 BF of walnut cut into cants, with the ends sealed. How long can we leave it in cant form before we have problems?
When the temperature goes over 50 degrees F, you increase the risk of problems -- especially if stored where bugs might get into the wood.
Gene Wengert, forum moderator
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Primary Processing: Kiln Construction
KnowledgeBase: Primary Processing: Kiln Operation
KnowledgeBase: Wood Engineering: Wood Properties
KnowledgeBase: Knowledge Base
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review Woodweb.com's Copyright Policy.
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.
865 Troxel Road
Lansdale, PA 19446
Copyright © 1996-2021 - Woodweb.com