Why is machined teak blotchy?
If you're not familiar with it, one property of freshly machined teak can take you by surprise. 1998.
by Professor Gene Wengert
We have been milling a small number of teak boards to go in a custom floor. I have never worked with teak before and was surprised to see blotchy areas of much lighter wood appear as we planed the board. These areas seemed to have nothing to do with heartwood/sapwood but did increase in area as we went deeper through the wood.
What causes this and is there anything other than staining that can bring the color back to a uniform look? We will be finishing the floor with Velvit oil.
You have discovered one very special property about teak--it is lighter in color in the center than on the surface. The good news is that within a day of exposure to sunlight, the color contrast will be gone. (It is an oxidation reaction. It often is greenish in color temporarily.) So, don't worry---be happy!
Professor Gene Wengert is Extension Specialist in Wood Processing at the Department of Forestry, University of Wisconsin-Madison.
Click on Wood Doctor Archives to peruse past answers.
If you would like to obtain a copy of "The Wood Doctor's Rx", visit the Wood Education and Resource Center Web site for more information.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Wood Engineering: Wood Properties
KnowledgeBase: Woodworking Miscellaneous: Woodworking
KnowledgeBase: Knowledge Base
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review Woodweb.com's Copyright Policy.
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.
865 Troxel Road
Lansdale, PA 19446
Copyright © 1996-2021 - Woodweb.com