Woodworking Business

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Shipping prices

Ethan  Member

Website: meladstudioworks.com

I have a potential commission for 12 stools to be shipped to San Antonio; I'm in central MA. In the past I have not shipped anything as large as these items - all large pieces have either been picked up or delivered by me.

Does anyone have advice on the best and most affordable packing and shipping methods?

I have done some rough pricing of crating and/or palletizing as well as using large boxes, shipping LTL freight, and my costs are ending up at upwards of 25% of each item. I have not yet heard from the customer, but I imagine this could be a deal-breaker for the order.

Any suggestions?

1/19/16       #2: Shipping prices ...
Pat Gilbert

Double corrugated boxes.

Too big for UPS?

1/19/16       #3: Shipping prices ...


You might want to take a clue from the mass merchandisers furniture departments. Everything they sell is shipped as flat as possible and is assembled on the buyer's/receiver's end. Would it be possible to ship parts to San Antonio in flat packs, then pay someone on the other end to do the final assembly? I'm sure there are quite a few custom woodworking shops in the San Antonio area that would be capable of doing some assembly and maybe even delivery for your products.

As far as freight goes, assuming you cannot break the parts down to UPS maximum sizes and weights, you can get competitive quotes at FreightQuote.com.

You could also contact a few household or commercial moving companies to check rates with them. Finding a reputable one could be tricky, however.

Good Luck


Freight Quote Website

1/19/16       #4: Shipping prices ...

Look into Plycon and Clark and Reid.

1/19/16       #5: Shipping prices ...
Ethan  Member

Website: meladstudioworks.com

Thanks -

Individually boxed through UPS - definitely the easiest way - is pushing $80/ea unfortunately.

The design for this model is not easily flatpacked, as it has no visible fasteners, but i'm thinking about a new 'high-end RTA' version, if that can even be a thing. Good idea to look for a shop in TX that could assemble for me though. I'll look into that.

I have gotten a quote from plycon, as they've been recommended - but still pretty pricey.

1/19/16       #6: Shipping prices ...
Alan F.

Some association have FedEx or UPS discounts, we get about 65% discount on FedEx Freight through NAM.

1/19/16       #7: Shipping prices ...


No matter how you slice it, it will cost you significantly more to ship these items assembled. Your box will have lots more air in it than product. Trucking and freight is figured on a formula that includes both weight and cubic inches.

Bottom line...ship as little air as possible or have your client figure out the getting the product from your shop to their location.


1/19/16       #8: Shipping prices ...
Hen Bob Member

I would avoid "freight qoute.com" at all costs..

Fedex freight has moved a few things for me at a very reasonable rate.. Also try ECHO Logistics.

1/20/16       #9: Shipping prices ...
Jim Member

You mention that this MIGHT be a deal breaker. The customer knows that the product will have to ship as he is not even close to you.

My opinion is to price it a couple of ways and let the customer decide what to do. I have had customers pay exorbitant shipping rates because they wanted it and they wanted it tomorrow. I shipped 3 of my products to Australia. I could have shipped them broken down and he could assemble. He selected to have shipped assembled and paid my more in shipping that what he paid for the product.

You never know till you tell him. He may be fine with whatever price you come up with.

1/20/16       #10: Shipping prices ...
B.H. Davis  Member

Website: http://www.curvedmouldings.com

We ship our curved moulding around the country and have developed accounts and systems for doing this safely and as economically as possible.

Feel free to contact me and I'll give you some guidance. We're in northeast CT 20 minutes south of Worcester, MA so could be close. I have plenty of packing material I would pass through to you at cost.

BH Davis

1/21/16       #11: Shipping prices ...
Ethan  Member

Website: meladstudioworks.com

Thanks for the help everyone. I'm working on a minor redesign to be able to offer either assembled or unassembled to the customer.

B.H., i'll be in touch. I appreciate the help.

1/21/16       #12: Shipping prices ...

LTL, common carrier, hints. No matter how well packaged, damage rates are high. Their "insurance" is based on cube or wt. not value. Doesn't really matter since they make it such a PIA to get anything out of them you will give up first. There are dedicated carriers that blanket wrap and do a good job, expensive though. Some common carriers are much better than others! We've had the best luck with small independent carriers but finding one that is going near your destination might not be easy.

1/21/16       #13: Shipping prices ...

I have had pretty good luck shipping pieces through uship.com - basically an ebay like marketplace for independent shipping companies - and listing for blanket wrap / white glove shipments. It is not as predictable as setting up & shipping something freight or UPS/Fedex, but it is a good way of tapping into these smaller carriers. And blanket wrap shipping is generally cheaper than going freight especially when you factor in the cost saving of not having to build crates, pallets, etc.

1/22/16       #14: Shipping prices ...
Ethan  Member

Website: meladstudioworks.com

Thanks -

I did just get a UShip quote for blanket wrapped shipping that was very reasonable. I'd just like to check their insurance/damage policies.

1/23/16       #15: Shipping prices ...

Website: http://jasonlewisfurniture.com

Uship does offer their own insurance (at an extra cost) when you book a shipment & some of the carriers have their own coverage as well. I have shipped probably 20-30 pieces this way & have never had an issue with damage. The only problems I have ever had are with timing & predictability - since you are dealing with small companies, sometimes just a guy and a truck, you are kind of at the mercy of their schedule, the circumstances of the trip & other deliveries, etc. Have had a couple nightmare shipments with delays & hassles, but overall pretty positive experience.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    • EnRoute Software
      CAD CAM Software by SAi Featuring 2D/3D Design and Toolpath Functions, Nesting, Rapid Texture and More, with Low-Cost Monthly Subscriptions Available
    • TradeSoft
      Seamless Management Software to Improve Estimating, Job Costing, Scheduling, Purchasing, Shipping, and Shop Floor Data Collection
    • VORTEK Spaces
      Award-winning 3D Presentation Software for kitchen designers, interior designers, woodworkers and architects
    • Macoser Inc
      Exclusive Importer of European Woodworking Machinery Since 1988
    • Air Handling Systems
      Your Best Source for Dust and Fume Collection
    • Better Vacuum Cups, Inc.
      Vacuum Cups for All CNC Routers As Well As Many After Market Parts for Your CNC
    • Rangate
      Woodworking Machinery, Supplies and Knowledge
    • Cabinetshop Maestro
      Web-Based Project Management Software for Custom Cabinet Shops - Manage Jobs from Prospect to Punchlist Through Scheduling, Task Management, Time Tracking and Communication
    • TradeJobPlacement.com
      Individualized Placement Services, Specializing in Millwork Design Engineers
    • WoodJobs.com Search Consultants
      Free Employment Service for Woodworking Related Job Seekers
    • Rico CNC Parts and Tools
      CNC Router Spare Parts, Vacuum Pods and Rubber Pads, Tool Holder Clips, CNC Woodturning Tools, Edgebander Replacements, Beam Saw Accessories
    • NEMI
      Products For CNC Machines - Digitizers, Tool Setters, Vacuum Pods, Vacuum Cups, Vacuum Tables, Vacuum Chucks and Software
    • Vexor Custom Woodworking Tools, Inc.
      Custom and Standard Router Bits, Shaper Cutters, Profile Knives, Multi Profile Insert Tooling and More

    Become a Sponsor today!