Been building boxes out of 3/4" import birch ply and 3/4" uv birch. I have noticed lately that the quality of the materials have become terrible. We just did a paint grade kitchen with pigmented conversion varnish and I could not believe how bad the veneer released from the plywood. I also use 1/2" birch for drawer bottoms and the last order I got you could see a lot of bleed through from the glue. The customer actually asked me if one of the spots was a blood spot. We cut around most of this but still need to have some usable product. I am really considering melamine for boxes now and only import for drawer bottoms from my local box store so I can inspect. Wondering if anyone else has noticed poor quality from their distributor? Plywood has gone up drastically in the past couple of years and I was told by my distributor that it was because of the anticipated embargoes and the price never went down after they did not happen. Should I switch to melamine and if so how do I sell it to my customers?
I have given up on import birch for anything other than structural components. You can not depend on the veneer to substrate glue bond,it has large ripples and voids it can, and will bubble when you apply a finish to it. also it is never flat, so you have to fight to get it to vacuum down on the cnc. not worth the trouble. Buy B2 or combination core.
We use to buy China birch then realized our time is worth more than we can save in materials if that makes any sense to you. Now we only buy domestic ply and haven't had any issues from our supplier since we switched.
The import varies from batch to batch- but quality has actually gotten better for us over the last 10 years on it. Used a couple hundred units of it in the last decade only three were inferior quality. It's stamped carb compliant, lays as flat as the domestic, etc. You probably just got a bad batch.
Switch to melamine?
There are some variations in Melamine board quality but not nearly as much as in ply. Disadvantages, weight, less water resistant and perceived value. It is possible to get melamine laid up on water resistant cores. Advantages: excellent durability of the surface coating, flat, uniform, consistent thickness, no de-lamination or voids, a better edge to band with PVC or ABS, more price stable, huge variety of decorative finishes, Can get nearly exact matches to HPL. If you do any commercial work it is the standard material.
I run a commercial only shop, no kitchens, so I have no issues with "perceived value." Virtually all commercial work is frame-less, so using a flat board becomes a necessity. We use between one and two units of melamine board a day. I'd hate to have to deal with plywood variables now. Not worth the struggle.
I'm going to disagree with the last poster. Melamine actually has better water resistance than plywood- run the tests yourself. Melamine is the hands down winner if it's say Roseberg or similar quality core. Biggest downside other than weight of melamine is perceived quality and value by clients- which is huge- which is why even though I believe it to be an inferior product ONCE INSTALLED we actually use plywood.
Neither Melamine nor ply are really happy with water but by care in design and material selection both can be made better able to deal with it. Given that we are down to perceived value, it's time to do some customer training.
On this forum there are many melamine haters. I've said it before but here it is again... Much of it stems from unwillingness to make the necessary investments to efficiently use the material. A 10" table saw just isn't going to work. And yes, I know you can buy a "melamine" blade.
Customer training...yeah...no. You might be able to do it with some. But let's face it- our purchase is largely an emotional one purchased by people that know very little about the products they are buying. The majority of folks, even though they are wrong to think so, you cannot convince them that a particle board core product is quality one. Just not going to happen. Whether we like it or not- the vast majority of our reputuation, selling power and credibility comes from first impressions. Trying to convice a client PB core product is like a used car salesman convincing you a car is in great shape- it may well be- but you aren't taking his word for it.
The "finest" European import cabinets use melamine, just look at how they sell it.
Most customers don't know the difference between the particle board used in melamine and underlayment which some shops have used years ago and would have a high failure rate. Also lots of cheap cabinets in the 70's and 80's were raw PB which is a different animal.
Find out why they want what they want and what they perceive as the value, then if they value a veneer interior at a higher cost, sell it to them.
You are making my point for me. The "finest" European cabinetry has a reputation- much of it is crap- but because of the reputation they can sell whatever they want because they are "exotic." When the OP reaches that point he won't have that concern. Most of us have not however. We still sell what our clients want. If using ply vs. PB makes selling easier, I'd rather wrestle the plywood a little in the shop than have to always prove my credibility to a client. Your choice though! You forget I was the one you said plywood was inferior- for everything except credibility.
Most clients don't know the difference between plywood and melamine if they don't see the core. If I am using veneer products (oak, cherry, walnut, ect) I buy them on a particle board core, or MDF if I can get it. They don't know the difference and only look at the outside. As for the water issue, what happens if you soak your piano in the pool?...
There are still some that want plywood. So, fine, oh, melamine is twenty bucks a sheet and plywood is fifty and you need to pay for finish. Gets them every time.
I still see the flaky, cheap P Bd used in some KD furniture. Remember when water beds were all the rage? 2X lumber and stained crappy ply or P Bd. No wonder there is a resistance.
I lived in Europe for awhile, kitchens are much different there. A lot of them are made in very automated plants. I never saw plywood used.
I have educated every single customer that came in wanting plywood. All but 1 received their diploma and switched to melamine :)
The education process is simple. They say they worry about water. I tell them cabinets are made from interior grade plywood offer no better water resistance than melamine. I tell them that the finish can scratch easily allowing water to penetrate. I tell them about ply delamination, and I then tell them the price difference. It literally takes 2 minutes to talk people out of plywood.
That one job i did with plywood was awful. Edgebander hated it, wasnt flat, ply seperating, etc. It was apparently a high quality domestic ply. Columbia if I recall correctly. I hope the stuff never makes its way in my shop again.
We use 1/2" Russian birch for our drawer boxes we never had a problem, maybe it was a bad batch. When ever we use Particle Board or MDF Cores and they are in contact with the ground or in high traffic areas we apply 1/4" or sometimes 1/8" solid wood edge matching the veneered panel to protect the interior core, or if there are gables around for example Dishwasher unit or Fridge Unit we use a solid edge on the length and bottom of the gables,the edges are very durable and never had an issue.
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .FLV .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.