I built faceframe kitchen cabs for customer with 1-3/8 in. overlay doors - this is the first time I ever did full overlay. They want soft close hinges. I found a Blum Compact Blumotion hinge that works but customer doesn't like the 3/16 in. gap because some of the cabs will be lit inside and they are afraid of ligth leaking out and are worried about dust getting in cabs. Anyone know of a solution to either (1) a differnt hinge that closes the gap (they want soft close in the hinge and not add-ons)...OR...(2) a solution to blocking the light in the cabs that will be lit?
This is a common downside to any brand of compact style face frame hinge. Using a “long arm” Euro hinge and a face frame adapter mounting plate will indeed bring the door close to the face frame. The challenge however will be your 1-3/8” overlay.
Without some serious modifications to the face frame you will only get a maximum overlay of 15/16” using a hinge and mounting plate combination. The modification would involve routing a pocket in the face frame where a face frame adapter mounting plate could be attached. This would also involve re-boring the doors for the hinges from your current 3mm TAB to something like a 6mm - 8mm TAB.
If the light issue is only visible at the end of a cabinet run (where the 3/16” gap is most evident) you might consider (If possible at this point) adding a finished end panel that would extend beyond the front edge of the face frame to the front edge of the door.
There are "dust seal" gaskets available for cabinetry but these are really only designed to be fitted between 2 butt doors at the handle side.
Now correct me if i am wrong guys...especially Dennis..(and i know this does not get to a 1 3/8" over lay) BUT, cant you get about 1 3/16" overlay with a Salice 40 mm strait arm hinge CFA7A99 and a 0mm plate?
I have some in stock but cant quite remember.
It is on my list to make samples showing how diffirent hinges can be used to solve problems.
I have also used Salice 40 mm hinges to solve problems with KV pocket door hardware.
Dennis i am in need of new Salice catalogs...just looked and mine are from around 2008. What do i need to do to get new catalogs?
Oh and i will be drinking some tequilla later..Happy 4th!
Just looking thru a 2008 catalog some more and noticed the Double Cam Large overlay face frame applications base plates part #BAM3R09 ... this still in production? Face frame needs bored out. Looks interesting! Up to 1 9/16" overlay.
Did i mention i need new catalogs..and some stickers, and pencils?
You are correct about the F Series use for large overlays. You could get to a 33mm overlay here using the 1mm frame adapter plate. I say 1mm plate because there is no 0mm face frame adapter plate. He would also need to fill and re-bore for the hinges since the edge bore distance would need to be 15mm.
The BAM3R09 mounting plate is still in production and is commonly used for large overlays on a face frame. This would be another solution for TB but could be a real challenge to accomplish if the kitchen is already installed. It is best suited if planned for in advance and the frames are bored out prior to assembly.
This plate is particularly useful if you are using 1-1/4" overlay compact hinges throughout the job and you now need a 1-1/4" overlay for the 165 degree hinge on the lazy Susan cabinet. This is the primary the reason it was developed in the first place.
If you want to have your catalogs updated just send me an email with your address and phone #. I will see that you are updated.
I build face frame cabinets with 1/2" overlay doors. I have always wondered why you would want to use doors that overlay 1 3/8" on a face frame. Is it so the frame shows a minimum amount to appear like frameless cabinets? Just wondering.
I've often wondered why build a face frame when you want it to look like a frame-less? All the fooling around to adapt a hardware system that was developed for Euro boxes just complicates a nicely designed set of hardware.
We always try to use Salice institutional hinges when we can talk the designers into the horrors of seeing a hinge knuckle. Nice full opening (180 or 270 on ends.) No broken doors from over travel. Never use the 165's where they will actually get used!
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.