Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: What’s the deal with the deep refrigerators these days?

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

What’s the deal with the deep refrigerators these days?

9/23/17       
Mike Fuson

For years I’ve built my boxed in fridge cabinets 26.5” deep which left about 4” sticking out of the cabinet. Here lately clients have been purchasing refrigerators that are massive deep! The latest one had the door inside of a door design with the drawer at the bottom. Client had to take both doors off and the drawer out and it barely fit through a 36 “ door. They regret the choice now and was showing me that they couldn’t even reach what was in the back of the fridge. I’m guessing this thing was close to 40” over all depth once it was in. Question. How deep to build the cabinet? I hate the way it looks sticking out of the cabinet that far. This particular one went to the ceiling, there’s no way of standing a deeper cabinet up unless a bigger crown is used. I’ve made that cabinet in three pieces before, meaning two sides and a box and then assemble on site. Or build the whole thing on site in the upright position. The easiest fix would be if they would stop making the dang things so deep but that ain’t going to happen. So what’s the solution, and how much is acceptable sticking out of a cabinet? Thanks

9/23/17       #2: What’s the deal with the deep refri ...
Rich Kuban Member

Website: http://closetexperts.com

Dealing with the same issue with washers and dryers in laundry rooms. Plus with front loaders, they want a folding counter on top. And older laundry rooms are not that wide across - also have to allow room to service and access hookups.

9/23/17       #3: What’s the deal with the deep refri ...
Leo G

Usually you build the cabinet to the box/door junction where the seal is on the refrigerator. If you go deeper than that the door might get interference from the cabinet box.

9/24/17       #4: What’s the deal with the deep refri ...
Ken Petrunick

I agree with Leo we do the same thing allowing only the door to protrude pass the panel. We just had a problem with a fairly expensive fridge with the thickness. 36" width cavity with on spec sheet which is usually a 35 5/8 width for a fridge. Back of fridge measured correct but the sides of the fridge were bulged out at least 3/4 on each side making it impossible to slide the fridge into the recommended opening. Client calls both manufacturer and store and the say this is normal. First time in 25 years I've had this happen. Going back this week to do a little modification to the panels to allow the fridge to fit. Boy wouldn't it be nice if they manufacturer stood behind their sizes and took some responsibility. Instead it costs us money to have to send someone out to fix. Just a little rant

9/24/17       #5: What’s the deal with the deep refri ...
Mike Fuson

I agree that only the doors need to stick out past the front of the cabinet. But don’t you think it will look dorky for a fridge cabinet to stick out 8-10” past the countertop? I do. Then again it looks dorky for the fridge to be sticking out of the cabinet also. If you look on houzz all the pics you see are with just the doors sticking out, but the cabinets look to be 26” or so. Counter depth fridges, the way it should be. I just did one with a 48” commercial fridge that was 24 3/4” deep. I just don’t get why some of these fridges are designed this deep, that’s my rant.
Ken, I too have had one bulging fridge and had to modify just as you are. Frustrating...

9/24/17       #6: What’s the deal with the deep refri ...
Mike Fuson

This is what I’m talking about.


View higher quality, full size image (910 X 1370)

9/24/17       #7: What’s the deal with the deep refri ...
Mark B Member

For me, that would be a situation where a plane change in the cabinets to accommodate that fridge would be incorporated. Its no fault of yours if the fridge was purchased after the layout but I personally wouldnt be happy with that much projection in a kitchen we made.

We tend to do a lot of kitchens with varied height and depth cabs so accommodating a non-standard appliance depth isnt really an issue but the appliance package has to be locked down before production begins.

In that situation I would either have made that entire fridge cab the depth required for the fridge and been done with it.

9/26/17       #8: What’s the deal with the deep refri ...
Jared Emery

I've done a stud pocket for those fat-assed fridges on occasion, and gain another 3.5". Take out the drywall, multitool out the one or two studs in the way, toenailed a header of sorts to carry the wall weight down, and give that fridge a push.

9/27/17       #9: What’s the deal with the deep refri ...
Alan F. Member

We did a few house for the first time in ages. The GC made a recess in the framing for the REFER so it flushed out.
I think he went 2 x 10 framing to 2 x 4 at the refer.
Whoever designed the houses had it all worked out so everything flushed out

9/27/17       #10: What’s the deal with the deep refri ...
Harold morantz

Website: http://morantz cabinets.com

Here in south Florida nobody cooks! The appliances are just for show. Counerdepth is normal but most clients go for flush inset. I hate that monster fridge but the recessed wall is the best bet.


View higher quality, full size image (2250 X 2250)


View higher quality, full size image (4032 X 3024)


View higher quality, full size image (1536 X 1536)

9/27/17       #11: What’s the deal with the deep refri ...
Mike Fuson

I appreciate all the responses. It’s a bad situation no matter how you look at it. Thing about it on this particular fridge, and I don’t know if you can tell from the pic, bu the doors round out in the front. So even if I had built the cabinets full depth minus the doors then it would protrude about 3” on the side and about 7” in the middle. So I’m going to say there’s no good answer but to build it out even with the doors. Thanks again.

9/28/17       #12: What’s the deal with the deep refri ...
Mark V.

Just a few thoughts…

I do not build a kitchen till I have appliance specs in hand and have reviewed them, no exceptions.

A 36” refrigerator is made to fit into a 36” opening, not a 36” opening, plus bulge allowance! That refrigerator should have been returned, unless there was a disclaimer on their appliance specification sheet, which is very doubtful.

I build custom frameless cabinetry, so modifying cabinets to fit a poorly manufactured appliance, after the fact, is not going to happen easily, if at all. Ken, please tell us who is manufacturing these problematic refrigerators, so we all can keep our eye out should a client choose one.

Mark

9/29/17       #13: What’s the deal with the deep refri ...
Mark B Member

I think the problem with the last few responses is that kitchens like Harolds example and what sounds like Mark V's are completely different animals that the kitchen I commonly build and looks like Mike Builds. Your talking about an appliance "opening". These are not kitchens with matching panels applied to all appliances. These are your standard face frame or even framless kitchen with a 30" gap for a range, a predeterimined gap for a fridge, a 24" gap for a dishwasher, and so on. Of course if the appliance spec'd is wider/deeper accommodations are made but my average kitchen looks NOTHING like that of Harolds beautiful examples. There is simply no way to make the fridge in question look like either of those photos. Its a standard retail fridge for a residential kitchen. The recessed wall in the back is surely an option if planned for but obviously the kitchen was spec'd at a given fridge width and the customer didnt take standard counter depth into consideration.

Again, Harolds kitchens are beautiful. Would love to build them more often, but they, and their budgets, are not what comes through our shop regularly.

9/29/17       #14: What’s the deal with the deep refri ...
keith farr

In a former life I was a home builder and the realtors would always say "dont put the fridge in until we get it sold" because they would stick out and make the kitchens look much smaller. Now as a cabinet builder I warn my customers about buying the big footage fridges. Ive seen many fridges returned after the customer realized what I had been telling them. We build our standard ref enclosure 25 1/4" deep so to cover countertop overhang next to the box. Then I always tell customer how far out their model will protrude . Let them decide, document it, build it!

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello