Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

3/8" inset hinges

6/22/15       
Chris

We have a bathroom remodel coming up and I am changing out the pulls on the cabinet, problem is I can't get a hinge with the same finish. Has anyone used the 35mm cup hinges on the 3/8" inset doors and did they work good for you.Were they Blum or Salice ?

6/22/15       #2: 3/8" inset hinges ...
Jim Herron

I used some a few years back.
Salice.
Expensive. Very expensive.
Worked ok.
Did I mention they're expensive?

6/23/15       #3: 3/8" inset hinges ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Chris,

Here are some details for the Salice B Series hinge for profile edge doors and lip doors. If this is a face frame cabinet, you will need to block out flush with the frame to create a place to mount the hinge.

There is now a new "soft close" add on Smove available for this hinge. It is also now available in "Titanium" plating. This gives the hinge an "ORB" appearance.

Your local Salice distributor can give you pricing.

Did Jim mention that they are expensive? :)


View higher quality, full size image (864 X 550)

6/23/15       #4: 3/8" inset hinges ...
Chris

Yes thanks for the information they are crazy expensive

6/23/15       #5: 3/8" inset hinges ...
james mcgrew Member

What is Expensive.. 30 years in Cabinetmaking and I have yet to find this ~

6/23/15       #6: 3/8" inset hinges ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

You're right, Jim. "Expensive" is a relative term. If they get the job done then it should be worth something.

These are definitely more expensive than your common 110 degree, full overlay hinge but the special applications that the B Series addresses are extensive.

This hinge has a very shallow cup depth - only 9mm and the TAB distance can be pushed all the way to 18mm from the edge of the door. This makes it ideal for unique profiles, lip doors, miter doors and any door that thins out near the edge.

Here are a few examples of other possibilities.


View higher quality, full size image (874 X 644)

6/23/15       #7: 3/8" inset hinges ...
james mcgrew Member

In the hotel business We had to train clerks to sell Rooms they could not afford on their own income. We found it and raised that hotels ADR by 30%. it was a big lesson for Me at the time, Value is the key work, Cheap is a level of Quality

6/23/15       #8: 3/8" inset hinges ...
Jim Herron

Let me clarify.
They are an expensive way to retain a handful of 60's lipped plywood doors in lieu of replacing those doors with overlay doors.
And the customer thought they'd "saved" money keeping the old junk doors.....
I will give you this, they have other applications.

6/23/15       #9: 3/8" inset hinges ...
door shop guy

I just bought some from Hafele to use for a shop sample and to have a few on hand. Hafele is around $7 per hinge and Baer was almost $9 per hinge.

I still produce lipped doors for some shops so there are folks out there still wanting lipped door kitchens.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)