Cabinetmaking Forum

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Mirka Ceros vs Surfprep RO (DA) Sanders?

5/11/17       
Pdub Member

We need to add another sander but are already running 2 Dynabrades. So instead of buying a new compressor, we are looking at the electrics. I know people love their Ceros' (when they're not broken) and they look a little more ergonomic and maneuverable than the new Deros version.
Has anyone tried the Surprep 5" (or 6") Surge Random Orbit (DA) sanders? Especially anyone who has also tried a Ceros. We have their 3"x4" pneumatic sander it's great.
I know the Festool groupies will chime in, but I put Festool in the same camp as Apple. Some of their stuff is truly the best. Others, well there are better offerings out there for less cost.

5/11/17       #2: Mirka Ceros vs Surfprep RO (DA) San ...
Mark B Member

We love our Ceros sanders. Never had the first bit of trouble out of them. But Im not sure Im personally too keen on the Deros but Ive never had one in my hand. The price jump is a bit to bear too as the Ceros was already ridiculously expensive.

We looked at SurfPrep before they had an electric with dust collection. I wouldnt hesitate to buy one but havent looked at them lately. Will be interesting to hear what others think.

I scan Ebay for used Ceros' but they dont come around to often.

5/11/17       #3: Mirka Ceros vs Surfprep RO (DA) San ...
door shop guy

Someone correct me if im wrong but Mirka discontinued the Ceros and all thats available is the Deros now. They had problems. I went thru 3 Mirka Ceros before i got one that actually did not have any problems. So...lol, they got the bugs worked out then quit making them.

I would not hesitate to try Surf Prep

5/12/17       #4: Mirka Ceros vs Surfprep RO (DA) San ...
Dave Edgerton  Member

We have 2 ceros and run the heck out o them. On one the controller fried but I think it was a dust issue. we had it fixed under warranty. WE have changed the bearings once in 5 years. I used my dynabrade air sander the other day and after 5 minutes put it down and went and got the ceros. I havent usd a deros but I would say that they are worth it. I dont know about the surfprep ones.

5/14/17       #5: Mirka Ceros vs Surfprep RO (DA) San ...
andy

Never tried the Surface Prep. I do have a Dynabrade but it doesn't get used. I have had the Ceros for about five years. It has stopped working three times, one time there were even flames coming out the side of it. That being said Mirka's customer service is great, they fixed it for free every time. I bought the brushless Festool as a backup. It's hard to control and vibrates so much your wrist/arm will get fatigued quickly. You also have to press a button to turn it on and off (as opposed to the paddle) and it doesn't even work that well (that reminds me, I need to put it on craigslist or in the recycle bin). I recently bought the Deros for the backup. It works excellent, just like the Ceros. (now my repaired Ceros is the backup) After you get accustomed to the Mirka sanders there's no going back. I would buy the Deros without hesitation.

5/14/17       #6: Mirka Ceros vs Surfprep RO (DA) San ...
Adam West  Member

Website: http://www.surfprepsanding.com

I work for SurfPrep so I am biased....

I absoluely love our new 5" Ray sander with the on board power supply. The power supply is in the very light weigh extended tail. It's super comfortable and very powerfull. I'm going to replace the air sander in my travel tool kit with the Ray soon.

In both our 5" and our 3x4 sanders, our motors are different than the competition. They are supposed to be higher torque for lower amps. It's called an Outer Runner design. I cannot expound on the differences but our tools are very powerful for very low amp draw.

I think the industry will move toward electric over the next decade. The savings in electricty is pretty huge over a standard air sander.

5/15/17       #7: Mirka Ceros vs Surfprep RO (DA) San ...
Mark B Member

Adam, We are super interested in the Ray. They are available with dust collection correct? That was one of the things that has always put me off with SurfPrep that dust collection seemed to be secondary?

5/15/17       #8: Mirka Ceros vs Surfprep RO (DA) San ...
Adam West  Member

Website: http://www.surfprepsanding.com

Yes. Easy to set up for dust collection. When you see our vacuum unit you will be blown away. It's very comfortable to use with the vacuum also.

5/16/17       #9: Mirka Ceros vs Surfprep RO (DA) San ...
Pdub Member

We're very interested too. Where are any details on this vacuum system you mention? It's not on your website and my distributor knows nothing about it.

5/16/17       #10: Mirka Ceros vs Surfprep RO (DA) San ...
Adam West  Member

Website: http://www.surfprepsanding.com

I don't believe our vacuum is on the website right now. The girl who does it just got married Sunday!

The vacuum was originally designed for Military and Aero Space applications. The designer of the vacuums approached us about a collaboration on a vacuum for the wood working industry and we jumped at the chance.

The vacuum has a bypass motor so it cannot be damaged or over heated by being plugged up.

It has a true hepa filter.

It has automatic activation by air and electric on every vacuum. You can have one of each plugged in if you wanted and then will both work when needed.

It has great casters and rolls super easily.

It's very quiet compared to most vacuum systems I've been around.

These are not plastic toys. The barrel is very thick plastic and the head unit is made of steel. This is the kind of vacuum that last a very long time.

I'm sorry I don't have pictures, but you can message me and I can get you in contact with those who do have pictures and specs.

5/18/17       #11: Mirka Ceros vs Surfprep RO (DA) San ...
Mark B Member

Adam,
I seem to have read much of this before and understand SurfPrep is a small company. Just odd that so much stuff is not on the site or product literature/info available for download.

I think one of our suppliers is a SurfPrep dealer. I will give them a ring and see what they have available to run to the shop for demo.

6/10/17       #13: Mirka Ceros vs Surfprep RO (DA) San ...
Eric Member

Just bought the Deros and 912 Vac system. I can barely hear the vac, even with the Deros dialed down to half speed. After the first few days of use, it was a wake up call to what's available. The net papers and pad savers they designed for this are eye openers. A UK reviewer called it. They cost twice as much and last three/four times longer.
The bad news? Using any other sander in the shop from now on. There's a DA in the back on a huge compressor. I'll let those guys have my dust mask and headphones.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)