|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
parts for omal c pneumatic hinge borer11/16
I have a weird situation. I own an Omal-c pneumatic hinge boring machine that needs an O-ring kit to repair the main up/down piston. Found out that Salice is the only distributer for this machine and when i spoke to tech to order the kit, i was asked my company name and who i bought my salice hinges from. Told them Richelieu America, but i use Blum.
Hello, ran into a similar situation with my Blum minipress , can not buy o rings to repair, but they will sell a new piston assembly for about 600. Took the time to install new piston only to find it defective , they sent out another and it was also defective. So my next step is to take orginal piston to a local hydraulic/pneumatic repair shop to have it serviced with new o rings. I would guess you could find a similar repair service close by.
Do you know Robert, our Florida territory manager? I have contacted him about this and he will get on touch with you.
Thanks Dennis, as always, we on woodweb can count on you. Harold
Thanks to Dennis and Robert, the salice guys, my piston rebuild kit is on the way,
I am searching for the piston replacement for our Omal Insert-c hinge boring machine. I can't locate anything myself online. I see mention on this thread that Salice sells the parts. Can you give the info for a rep in Georgia/Atlanta territory? I can't locate anything myself online.
Further back in this thread is the contact info for Dennis Bean. He can give you the best advice.