We are a small cabinet shop doing mostly commercial and a few large residential jobs. I am looking for someone with experience that implemented Cabinet vision and screen to machine . We have a beam saw and point to point we are not nesting currently but looking to get a nested base router in the near future . I would appreciate any information or any of your experiences in either software. We are having a very hard time in making the decision between Microvellum and cabinet vision. Thanking you in advance Irving
I have used CV since 1995 and Ultimate screen to machine since 2007. I can only say I would have never been able to grow and run my business without it. I have many post where someone has another software only to question whether or not they should upgrade to CV. I give it my highest recomendation.
A little history, we have been in business for about 20 years and just got into CNC a little more than a year ago with a flat table machine and a drill dowel machine as well. We build both commercial and high end residential
We ran the software that came with the machines (both Weekes) and needed to move faster. We looked at both CV and Microvellum and went with MIcrovellum we felt it fit our needs better and the support seemed better too. CV has a lot of presentation type of applications but Microvellum seemed to be more of a work horse. I will say its a lot to swallow and is a big undertaking. I would say that I am happy and I'm the guy running it Chris
You should consider how important it is to be able to submit and do shop drawings in an AutoCAD format. If that is important, you will want to lean toward an AutoCAD based software. Both programs that you mention, in order to implement them properly, require the sufficient amount of training and integration. At least a week onsite to get you functioning. Plan on revisiting training on specific functions that you want to get more proficient with. You can go cheaper, but in the long run, you'll run into the limitations of a cheaper software and you'll be investing more to address those shortcomings. I'll be completely open and honest with you, I've got experience with MV but not CV. To be fair, it should be noted that we represent woodCAD|CAM, now and it is, at least worth your attention to look at. It has been around for quite a while but was mainly in the European market. The nice thing is that it is German engineering. They just don't do things unless it's done right. It is AutoCAD based and provides excellent submittal drawings, right out of the box. The 3D modeling interface for addressing custom products is a bit more user friendly when dealing with things that are non standard. Sorry to throw more confusion into your decision making process, but you should do your due diligence.
We have been running Cabinet Vision for a long time and 2 years ago bought a cnc, then bought s2m.
It's pretty intense, but with the knowledge in hand that it all revolves around construction methods and materials schedules, things are going well.
As for shop submitals, I think that the devil is in the details. If you don't show details like the architect wants, they are going to be rejected. Their is a CAD feature and you can use it to get the details flushed out.
We had a ptp and slider combo, but after drawings that are 45 pages becoming common place, I decided on a router and not to post to a saw and the ptp. The choice has worked well for us. It is pretty steep on the learning curve, but like I said it has been good. I looked @ Microvellum and man, it's powerful, but I already had some experience with Cabinet Vision, so that's where we went. I run Ultimate, it's very powerful, don't let anyone bs you.
Our router is a 5x12. We cut a lot of corian, so we seam it up and set it up as 60x144 for the material size. It has saved us a lot of time on the floor. Good luck.
No software that will really perform is going to be inexpensive or easy to use. We use a "sister" software to WoodCadCam and it is brilliant. I suggest you at least take a look at what Pat has to offer. What you need to validate are the machine posts available. Some software processes to certain machines better than others. Biesse, and no, I am not affiliated with Biesse, connects well with most packages...just FYI. Decide what you want a package to accomplish for you, hand the software salesman a list and see if the software performs while he is there. Don't get pulled in to the "oh, yes...it will do that but I don't have my system configured for that..." excuse....have them get on the phone with tech support or an expert while you are watching to get the real answers. Happy hunting.
Irving, you said you have a small cabinet shop. What's driving the purchase of new software? Getting more out of the machinery? Handling drawings? Do you in fact need to draw everything you make? Is there a need to go beyond AutoCAD? Are you buying a sledgehammer when a hammer will do?
Yes, Mike. We will be showing this and more at IWF. You can also go to our website and view a recorded version of our last webcast. Feel free to contact me if you wish to ask questions or would like more information.
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.