Computer Aided Design

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Design software

7/6/13       
Stefan23 Member

For the past couple of days I've been looking into a few cabinet design programs and can’t decide which way to go. My budget is a little tight. I have a small shop out back with just me and a helper. So far I've drawn most things by hand and use some spreadsheets for part list generation. Mostly I do remodeling type wok, frame or frameless depending on the job.

I've checked out Cabinet creator, Cabinet planner and Sketchup/cutlister. So far I like Cabinet planner the most for ease of use but it doesn’t give part sizes in the trial version. Does anyone have any/all of these and can compare them for me? How accurate are the part sizes and how much customizing can be done to the cabinets? And are there any other programs I should be looking at?

7/6/13       #3: Design software ...
Denny J

Mozaik

7/6/13       #4: Design software ...
Stefan23 Member

I did look at Mozaik but don't like the idea of paying for it monthly. Like I mentioned, money is a little tight for me now.

7/7/13       #5: Design software ...
Denny J

Ecabinets used to be free. Not sure if it is any more but if it is look into that.

7/7/13       #6: Design software ...
Leland Thomasset  Member

Website: http://www.cnc-cabinetparts.com

Cabinet Vision has a cabinet design program for around 1K and you can grow your software along with your company

7/9/13       #7: Design software ...
Fred Wholley  Member

Website: kcdsoftware.com

Hi Stefan,

I work for KCD Software. You can rent the software on a month to month basis so whenever you need you just call up and rent the software. KCD has an evaluation of the software or if you want call up and set up a time for a Free on line demonstration of the software, so you will be able to see how the software works for you before you purchase anything. Give us call 508-760-1140 and anyone that picks up the phone can Help. If you are going to the AWFS stop by our Booth 4247 for a Demo of KCD.

7/9/13       #8: Design software ...
Stefan23 Member

Thanks for the suggestions. I went ahead with cabinet planner. Sunday afternoon I sent them an email asking about accuracy and parts sizes. They had me send them the job I’d created and they returned pdf’s of all the shop plans, parts lists and nested panel sheets for me to look over. Everything looked good so I went ahead and bought it.

8/29/13       #9: Design software ...
Jon Andrew Member

Website: http://www.cadcondesign.com

Hello Stefan, We at Cad-Con Design, Specialize in Millwork and Casework Shop Drawings as well as Shop Drawings in general for Concrete, Fencing, Miniature Scale Models, and 3-D work. We use AutoCad 2012 to do all most anything and everything. We got it for a very reasonable price. Theres nothing we dont do with it.

I would have to recommend this as it works great for us, not to say it will for you but we have clients in 17 states and 2 countries who are happy with what we provide them. They usually come back for repeat business also.

I can recommend a place to get a copy of AutoCad 2012 if you are interested.

9/11/13       #10: Design software ...
ciciswift Member

Website: http://pcb.hqew.net/?s=544864

Often use CAD drawing software, also draw the PCB drawing, also good, useful, use is also very comfortable


View higher quality, full size image (3456 X 2304)

PCB manufacture

11/12/14       #11: Design software ...
Stuart

Take the time to learn AutoCad. Its much more flexible than the other programs. Learn the programming side of Autocad and you will unleash its true power. I can draw renedered 3d cabinets, 2d workshop plans, cutlists and parts for cnc machine ready to import into your nesting software. All done will microsoft Excel and AutoCad. Excel actually creates the 3d model. With a click of a button, I just enter the cabinet dimensions and Excel does everything for me. Once you understand what you can achieve, the capabilities are endless.

11/13/14       #12: Design software ...
Kerry Fullington

Stuart,

Would you post some examples of your work? I would like to see cutlists and 3d rendered views of a job.

2/19/22       #13: Design software ...
Robert Hones Member

I simply use a method I saw a long time ago making simple gauge blocks for the spring angle, marking the wall and ceiling, then installing and nailing wherever possible followed by caulk.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Sponsors
    • ECabinet Systems
      Free, Fully Functional Cabinet Design Software and Kitchen Layout Software
    • Rangate
      Woodworking Machinery, Supplies and Knowledge
    • Cabinet Pro
      Design and Manufacturing Software for the Cabinet and Door Industries Since 1986
    • EnRoute Software
      CAD CAM Software by SAi Featuring 2D/3D Design and Toolpath Functions, Nesting, Rapid Texture and More, with Low-Cost Monthly Subscriptions Available
    • Thermwood Corporation
      Computer Numerical Control (CNC) Routers and Accessories
    • Shapr3D Intuitive CAD for Woodworking
      Shapr3D is a multidevice CAD software with intuitive design features to go from design to visualization in minutes.
    • Cabinetshop Maestro
      Web-Based Project Management Software for Custom Cabinet Shops - Manage Jobs from Prospect to Punchlist Through Scheduling, Task Management, Time Tracking and Communication
    • 2020 Manufacturing Solutions
      Manufacturing Software Solutions Including an Offering Designed For Cabinetmakers, In Addition to Furniture, Architectural Millwork and Other Wood Product Manufacturers We Support
    • NEMI
      Products For CNC Machines - Digitizers, Tool Setters, Vacuum Pods, Vacuum Cups, Vacuum Tables, Vacuum Chucks and Software
    • KCD Software
      Powerful 3D Cabinet/Closet Design Software with Built-In Touchscreen Mode for Mobile Use with Best Production Practices Including Direct to Cut List, Cabinotch and/or CNC Machining
    • VORTEK Spaces
      Award-winning 3D Presentation Software for kitchen designers, interior designers, woodworkers and architects
    • TradeSoft
      Seamless Management Software to Improve Estimating, Job Costing, Scheduling, Purchasing, Shipping, and Shop Floor Data Collection

    Become a Sponsor today!