Computer Aided Design

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Mozaik Support

Akram Member


Does any one have any experience about Mozaik support??
before we buy it, we did some research but found nothing bad or good about it.
we still in the trial period (paid 3 month) and looks like it will be not a good experience.
time is running and we still waiting for some one return our calls or solve some construction methods simple questions.

6/5/14       #2: Mozaik Support ...
james mcgrew  Member


you are on the Moziak forum right ?

6/5/14       #3: Mozaik Support ...

I was looking into Moziak, too. I went to their website and sent them a few questions through their contact us link. That was a month and a half ago, and I haven't heard anything from them yet.

6/5/14       #4: Mozaik Support ...
Akram Member


Yes, we posted around 9 questions so far at the forums board, some of them were answered and some got HALF answers (by admin most of the time).
Remember that people on forums are looking for answers as well, because they are like us do not have this much software experience, therefor it is not a reliable source for support. It is time consuming and more elaborated way to get support, for example a user can tell you as how to cut groove and this will take you 3 or 4 extra steps vs a support professional can get it right in one step to modify parameters in somehow clicking the right line to edit.
Chat room option is useless no one responded to any of my question except a very knowledgeable user told us as how to post a question, so now we are not excited of how many users showing on line at the bottom of the screen.
As a small business owner, and over 5 years was using KCD software and some experience with cabinet vision I can tell you that, Mozaik is a very good and smart software has very useful editable parameters at every level from global library level to cabinet level, but nothing is perfect, is like a sophisticated equipment with NO user manual or spare parts. New software with no support is useless and time waster.
Still hoping by the end of the 3 month trial that something will change, so we feel that gave it a fair trial.
also is there any one at the Ventura or LA area using Mozaik, we need to connect and see if we can get some questions answered.
Lee, thank you for your response.

6/5/14       #5: Mozaik Support ...

I am a KCD user and just bought a CNC and before I dropped the money on the KCD cnc module, I thought I would give mozaik a try.

The ability to modify pretty much anything is fantastic as its all sketchup based. My problem with it was the lack of support, and I also found in INCREDIBLY TEDIOUS to draw out a job.

They basically got me for 3 months money. I used it for about a week before I scrapped it. Not the great software everyone has it hyped up to be in my opinion.

KCD will get my money for the CNC linker, and I will just have to AutoCAD the odd random part that doesnt fit within the KCD library. The majority of my work will fall within the KCD parameters, so it shouldnt be a big deal.

6/5/14       #6: Mozaik Support ...
yaakov katz

try polyboard
the service is perfect and the software very powerfull no any extra modul
you have main software ,optinest for cnc and opticut for beam saw all open to all main machines

6/5/14       #7: Mozaik Support ...

My situation/experience with Mozaic is virtually identical to JM's

In my limited experience with it, I found it took way too long to generate sets of drawings, and I wasn't at all pleased with their support. One of the replies I got from them was just plain rude.

6/7/14       #9: Mozaik Support ...
Jon Member

I started using Mosaik after purchasing a router. Our old software would not work with the new CNC. There are videos on the help site that will answer most questions. You really need to watch all of the videos to help in learning how it works. I visit the user forum regularly. I see a lot of questions that users ask, that just want someone to "do it for them", without taking the time and due diligence to learn how it works. They will be better off in the long run if they take the time to learn the software.

On the other side of the coin, there are things that get get missed when setting up, or modifying cabinets, that can be frustrating, and may need some advice. I have had a few of these, and they were merely an oversight on my part. These issues got resolved in a timely fashion.

Mosaik is only a couple of years old, so there are a few things that need to be worked out, but the developers seem to be pro-active in that respect. Also even the most experience users only have 18-24 mo. of experience. The user forum will get better responses from users as their experience grows.

6/7/14       #10: Mozaik Support ...
james mcgrew  Member


I have been surprised at the lack of response to this so far, I know these guys personally and know how truly sincere they are about their software, I will try and get some follow up on this,

6/7/14       #11: Mozaik Support ...
Akram Member


thanks again for the follow up, at this point we stuck really bad, having a CNC Tech coming next week, we still can not get any construction method right so far.
also we still do not know if the post is correct and capable of shooting correct parts.
like i said, forums all half answers, emailed tech support two projects and NO response, calling and leaving message over 2 to 3 times a day and no hope.
we have to re do the math, slashing over 14K or more (do not know yet) with 1000 per year with decent support using cabinet vision or continue this madness with zero down and 1500 per year using Mozaik.
I have the call log showing all calls went out to the support line.
will continue calling to get just someone during the cnc training and will see what we can do later.

6/8/14       #12: Mozaik Support ...

I was looking at Mozaik, but they didn't have a link for my CNC, I was hoping it would be done soon as KCD is a rip off compared to mozaik for cost.

6/9/14       #13: Mozaik Support ...

Give this a look (link below).

Simple no nonsense program. Link it with aspire or vcarve pro and it's very powerfull. The best part is you pay for it once and your done.

Cabinet Parts Pro

6/22/14       #14: Mozaik Support ...
Frank D. Jimenez  Member


Hi Akram,

It sounds like you are in a bind. Until you and Jim get things sorted out with Mozaik, you are welcome to use the full version of Cabinet Pro CNC for 3 months if you like....FOR NO CHARGE.

If you give me a call at (541) 664-2808, I should be able to get you up and running machining and cutting parts within two days. If you can work uninterrupted, you'll be getting your cutlists within a day. (Learning the CAD and BIDDING portions of the program would take a little longer, but you shouldn't need that to get some cabinets designed and their parts sent to your CNC.)

This is not an attempt to sell you anything. It's just a simple matter of helping someone who is in a bind. After you get your questions answered by Mozaik, you can toss Cabinet Pro CNC, because it will have cost you nothing to have used it. The tech support I will provide you will be free of charge too.

6/22/14       #15: Mozaik Support ...
Frank D. Jimenez  Member



Which CNC router do you have that Mozaik cannot support? I ask this only out of curiosity because I made the post processor engine for Cabinet Pro CNC that supports ALL routers. The engine outputs all variations of g-code, Biesseworks, Woodwop, HOPS, Wincut, Shopbot, and HPGL. So I am curious as to which router you have that is so difficult.

6/25/14       #16: Mozaik Support ...

Just a curiousity really....have you taken a moment to consider what it is costing you in down time while you are trying to save a few bucks on software? You spent quite a bit of money going to CNC from manual cutting and machining, why short-change yourself on software? It is all about the return on what you invest in your company, not the money you are saving today. Pony up and get some real software from a real company that has the staff to support you? Just thinking outloud.

10/22/14       #17: Mozaik Support ...

Don't be silly Akram... you can't get CNC output with Cabinetvision for $14,000. Try $22,000.
To get the integrator out there is $2000 by itself.

10/22/14       #18: Mozaik Support ...
james mcgrew Member

General rule of thumb is if you have a PP problem there are two issues A) your cnc company is propietary on the controller and milking bucks or B) you are expecting the software company to do the impossible for you. most all software company's i have dealt with WANT you to have the PP otherwise you cannot use thier software..... NEVER NEVER buy a machine without checking software first and testing it.

10/22/14       #19: Mozaik Support ...


I have a SCM pratix. Thanks

10/23/14       #20: Mozaik Support ...
Frank D. Jimenez  Member


The SCM Pratix is a nice router and a relatively easy one to support. Are you up and running yet with Mozaik?

10/23/14       #21: Mozaik Support ...

I read a lot of negative or so so feedback on it so never bothered to pursue it any further.

10/23/14       #22: Mozaik Support ...
Frank D. Jimenez  Member


Hi Scott,

So what software did you decide upon? Please don't tell me your Pratix is being used as a gluing table, because that would be a real bummer. That machine needs to be put to good use.

10/23/14       #23: Mozaik Support ...

I never bought anything yet, I have programs written for everything I do so really haven't needed anything to badly. I figured it would be more profitable to upgrade the air make up for a spray booth.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)