Hi all,
I am really hoping someone out there can take the time to help me with this problem. I recently bought a cabinet shop from an old timer. He used Cabinet Ware (that is at least 20 years outdated) to draw the kitchens and get door/drawer lists from, then he would transfer them to the AI center. From that program, it is exported to Auto Cabinets, where it is turned into an mpr file and is copied to a thumb drive and taken to the router.
Apparently the Router Cad is corrupted and therefore my router is down. I have had a couple of companies look at the router but they don't support any software, just that everything looks good on the router side. I'm guessing there is an easier way to go about this but this is the way I learned so I don't know any other way. I also use the Zargen/KISS 2 system. I assume new software is able to have inputs into it that accepts that type of system.
Any suggestions or tips on how to get this to work would be greatly appreciated. Also, I am a new company, which means not a lot of money, so a cheaper fix would be great! I'm definitely not opposed to new software to get me out of the 80's.
I am dead in the water and my jobs are backing up. Hopefully I can get this resolved before anyone backs out.