Hey everyone , I'm looking to the woodweb community for some technical guidance . I have about 20 of panels very similar to the one attached to replicate for a project I am working on . I am wondering with all the modern technology if it is possible to have a program help me with this .....to program all of the depths of each cut and the contours . I have alphacam right now but I don't believe that can help me . Although it's convert image to raster /vector tool is amazing .
If you have a router with probing capabilities its not too hard to run a probe routine over the panels.You then take the points to generate a cutting program.
An alternative is to have a scanning service scan the surface of your panel and create a file for you to use.It may be that you get a .stl file and you will have to use a software package that will create a surfacing routine.
This looks like a download from 3d model club or Vector Art 3d. Both of these companies are reputable and can also produce custom models for you at extra cost. I have carved dozens of models from these companies using AlphaCam Advanced Router starting with V6 up to the current AlphaCam 2016, all with 3 axis machines.
I have also contracted with Brady Watson several times in the past. He is reputable and reliable and I highly recommend him. If you are trying to reproduce an existing carving he can scan it and send you an STL file which you can import into Alphacam then use Alphacam to produce toolpaths over it just like the models you can buy from the other companies.
There are many other softwares out there that create toolpaths in 3d, and some that are easier to use than AlphaCam for this, but why spend money for another program to replace one that is already as powerful as you can buy? There is an inherent trade off between "Simple to use" and "Capable of anything"
I think AlphaCam bridges that gap very well with their tech help. They are really great.
It is challenging, but believe me with a little effort and some tech guidance you will be opening up a lot of possibilities for yourself by toolpathing these with AlphaCam. Each one gets easier and opens up new possibilities for your business.
The first pic is the 3d model club files I did originally, I had Mike do a custom set of which we are only 8 files done. I know Brady as well he spoke at the Aspire Camp in My shop last year. While I have yet to use him his work is well know to be excellent, Mike Modeled my stations from scratch
Yes, Alphacam can toolpath many different formats, STL, Rhino, too many to list all natively. I believe they partnered with Aspire and still offer it as an integrated feature, but I have never used that extra cost extension. From my standpoint adding Aspire to Alphacam seems redundant, but then I have limited knowledge of Aspire, and already have access to other modeling software. I think Aspire has features that are very useful if you are creating 3d models, and Alphacam is primarily a toolpathing software with functions for geometry creation and manipulation, so for some it may be an excellent marriage. Generally if I am drawing 2d I go to Autocad, if modeling 3d use Rhino and taking it to the CNC is all AlphaCam.
For example, there is arch work and pilaster work on Soraghan's website under the "about" tab that could be done 100 percent in Alpha, or could be modeled in Rhino and imported to AlphaCam to toolpath. Perhaps Aspire could as well.
Alphacam still has the module "Art" which is the Aspire add on. The planit fellas did a regional meeting in my shop a few years ago when theis was released as I hold an Aspire Camp for users of the Aspire (Vectric) software each Spring. While I have CV I had little reason to watch this. I started my CNC journey with Vectric software so my bias is based on that being my sole experience.
Alphacam as a stand alone will import an STL (scan or file) and machine, keey is will it allow for any manipulation as to size, depth or allow for say a panel back to allow the OP to make it a panel in one piece. .
I am learning something with this thread as I have used CW since 97 and owned CV since 2011 or 12 and just now wanting to really learn it,, draw back is I had all computer built with AMD cards which CV will not work with,, that changes this week..
best and most reasonable cost for Gavin is to get it scanned and have a friend make the model fit his final need, I presume the panel is on with multiple runs not multiple different panels designs. If he wants I am willing to help. Brady is a scanner and a Damn good one, He was a key speaker last year at the Aspire Camp and I got to spend some really good time with him, shortly after I sold my scanner to Mike and Now I am beginning to miss it !! all of these guys are the go to guys for anyone wanting to do 3d cnc files which are custom. and all of them I consider friends, Mike has attended every Camp I have held since 2008 and will be here again this year..
1/11/16 #12: Replicating wood carvings on cnc ...
I have know Mike longer than I have known Brady, Mike has done a good dozen plus projects for me and all successful some scanned some modeled from a photo, Brady also has a large following I would call and ask each.
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.