Value Added Wood Processing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Uses for hardwood waste

3/13/09       
Jim Kidd Member

Website: http://www.robscustomcabinetry.net

We generate a lot of trim from our gang rip saw. We are thinking about getting a grinder and sell it as a fuel. If we do this we would need some kind of a wood hog that could handle cherry, red birch, hard maple, oak, hickory and walnut.

I would like the thoughts of others about what they have done with this waste. Is there a market for wood that is 1/2" by 1" by 8 feet?

Your thoughts,

Jim

3/13/09       #2: Uses for hardwood waste ...
justin wright

Website: http://www.americanlogsandsiding.com

Grade Stakes / Laths

3/14/09       #3: Uses for hardwood waste ...
David

How much are you generating per week or month? If over 20 tons ~ 10,000BF of waste and dust then selling it is probably worth looking into, you could also aggregate all your other clean dust (from solid wood not ply or mdf) it adds up quick. Less than 20-40 tons a month and the ROI for the grinder, DC, and trailer are typically not there.

You may also want to talk to your lumber suppliers, the larger distribution yards and most mills burn or sell their wood waste and may be willing to take your bundles of edgings, I would not count on getting paid for this but it would save you the dumping fees.

3/23/09       #4: Uses for hardwood waste ...
Rastus Snow

Website: http://www.nativelumber.net

Mixing the different species and gluing back together would make for some interesting turning stock, table legs, etc.. Quickest route for my scraps always seems to be firewood. What about those rolltop breadboxes? Sure is hard letting quality lumber go to waste, even if it is just scraps!

4/2/09       #5: Uses for hardwood waste ...
Jim Kidd  Member

Website: http://www.robscustomcabinetry.net

Gluing the strips together is something that we do all the time so we are good at it. I wonder what kind of market there would be from wood turners for pieces of the same or different species of wood. We typically get many pieces that could be glued together to give the desired thickness and we could cut to length.

Thanks for the ideas

Jim

http://www.robscustomcabinetry.net/cable-natural-history-museum.html

4/2/09       #6: Uses for hardwood waste ...
Rastus Snow Member

Website: http://www.nativelumber.net

Jim, Try sending your message again. I couldn't get it to load. Rastus

4/29/09       #7: Uses for hardwood waste ...
Steve Wasem

Website: http://columbusgradestake.com

Grade Stakes in the MidWest is 1/2x1-1/2x length. In the East they are 3/8-1/2x1to 1-3/8 x length. Hardwoods. Customers want one stop shop so you would need to get into other sizes or wholesale. That would make the 1/2x1-1/2x48 worth about 25 cents. Newman makes a small shaving mill to convert into bedding material. We have wholesalers willing to park a semi at our facilities for us to load our sawdust and shavings mixed. A large qty of hardwood the same size with length has quite a few markets.
What part of the country is your factory?

4/30/09       #8: Uses for hardwood waste ...
Jim Kidd  Member

Website: http://www.robscustomcabinetry.net

Thanks for the response. We are located in Superior, WI. Currently, we have a semi trailer that we load the sawdust and moulder shavings into through our dust collection.

We are looking at some piece of equipment to grind the rippings and off cuts into material that can be blown into that system.

But we are also trying to figure out what can be made with some of the wood pieces that still have some value.

Thanks,

Jim

http://robscustomcabinetry.net

5/11/09       #9: Uses for hardwood waste ...
RJParish Member

What would it take to make these strips into dowels?

12/26/09       #10: Uses for hardwood waste ...
Joe Styles Member

Wish I had that trouble. I have a lot of soft wood and little hardwood here. A nominal 1x6 of oak goes for around $6.90 a ft here. I imagine a laminated board would be cheaper. Prolly only $3.50 a foot. I guess shipping wood be expensive though. Hard wood goes for top dollar here on the west coast.

The stake idea is a good one though. If you have a shaper you could run some basic moldings from some of it. If nothing else it will make sawdust for free.

1/10/10       #11: Uses for hardwood waste ...
Valdis

You can buy a wood shredder and briquetting press and make wooden briquettes for heating. Only the machines costs a lot of money!

You can also make wooden dowels if You have lenght of the material over 30 cm.

5/12/10       #12: Uses for hardwood waste ...
Madison

My company manufactures both grinders and briquette presses. We can investigate their fit if you have an interest.

www.weimaamerica.com

5/13/10       #13: Uses for hardwood waste ...
Glen Member

If you are going to grind it, I think you can sell a fair bit of it to mushroom growers.

Oyster mushrooms need hardwood sawdust substrate.

5/13/10       #14: Uses for hardwood waste ...
Steve Wasem

KD you have some of the hardest species to grind up. I'd make dowels on the moulder. There are several used grinders on the market. For small strips check the plastic grinding machines they are cheap right now. I saw some at a Cleveland Industrial supplier for less than $1,000.00 complete with motor. I've ground up hickory with one of these units. Birch is tough.

3/14/15       #16: Uses for hardwood waste ...
charlie

Website: http://www.briquetter.cn/

you can carbonize them first, then make them into charcoal briquette. or press them into pellets directly. we supply briquette press here.

briquette press


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)