• Forum Message Search Results:
    • Your search for woodweb found 1604 documents (of 1606 searched).
    1-1604 of the 1604 results are displayed below. 1604 results indicates you likely need to narrow your search by choosing a specific area from the drop down list, or using more specific search term(s). To view the additional results not shown on this page Click the "More Matches" link found at the end of each category.


    Forum Message Results:

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/25/25) -- If this is a money making venture and not just a one off then you will need to invest in a ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Joel, I'll mention once again. WoodWeb is a Professional Forum. We don't tolerate people who ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/15/21) -- I too love the West System 105 epoxy. As a Michigander, it’s better brand than a Ford any ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- That is an interesting article. I'm not sure that the test results pertain to your bench p ...

    How do you use CAD? ... vote in WOODWEB's latest Poll
    A message posted at WOODWEB's Adhesives Forum (12/2) -- WOODWEB is interested in finding out how professional woodworkers use CAD in their business o ...

    Project Shipping to Costa Rica
    A message posted at WOODWEB's Adhesives Forum (5/31) -- I am in the process of bidding a project that will be shipped to Costa Rica when complete. It ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/31) -- We often try things that sound unachievable with wood. If the Woodweb guys knew half of the s ...

    Re: Mechanical glue spreader
    A message posted at WOODWEB's Adhesives Forum (10/30) -- Hi Dave, You may want to have a look at the Lamello LK glue systems. They've been around for ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- David, In best practice one should try to remove the oil from teak before glueing. It doesn't ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/28/25) -- I do not think a vacuum press will be sufficient to ensure a flat pressing. I would look f ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/22) -- Contact Rangate, a Woodweb advertiser. They have a knot filler that is much quicker than epo ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/11/23) -- I would not use Titebond III in a hot press. David Sochar on Woodweb has pointed out that ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/9) -- We've had this discussion many times on Woodweb. Check the Knowledge Base. Softer formulas of ...

    Shop Poll: What Size Is Your Shop?
    A message posted at WOODWEB's Adhesives Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOODW ...

    Re: Tite bond
    A message posted at WOODWEB's Adhesives Forum (9/2) -- Based on a memory from a long long time ago. The excess glue wiped across the boards dried mil ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/31/25) -- Proper epoxy performance also depends on formulation quality. Even with correct mix ratio ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (12/31) -- Richtad, For your tabletop there is nothing wrong with TB3 as your adhesive. If you are able ...

    edge gluing
    A message posted at WOODWEB's Adhesives Forum (12/31) -- A customer has requested that I make a very large table. My question is that the top will be ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (12/31) -- When I have to glue up a big top like this, I tongue and groove the boards on the shaper, an ...

    Re: Edgebander glue pellet life span
    A message posted at WOODWEB's Adhesives Forum (12/31) -- Be careful of reheating your glue time and time again. We have been having issues with glue ...

    Re: Banding
    A message posted at WOODWEB's Adhesives Forum (12/31) -- I have also had this issue. I've had banding fall off an entire job. It's very embarrassing ...

    Re: Adhesive to make PSA sand discs
    A message posted at WOODWEB's Adhesives Forum (10/31/22) -- Double backed carpet tape would work. I can't imagine it's worth the time and effort when ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (10/31) -- How thick is the wood you are gluing to the mdf? I’ve done a few tops where I’ve epoxyed bot ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (10/31) -- That thing called "wood movement" is actually moisture movement. It's especially p ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (10/31) -- What is unsaid above is that solid wood moves, MDF does not move. "Moving" actuall ...

    glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (10/31) -- we have had table tops with water fall legs that the hardwood cracks & or splits. on the ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (10/31) -- Theres a thing called wood movement you might want to look into... ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (10/31) -- Alden, If you are getting a glue pot bander, it is a pain to change colors, unless you have ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (10/31) -- I dont mean to steal the thread but i did not find any place to post it else In anticipation ...

    Banding
    A message posted at WOODWEB's Adhesives Forum (10/31) -- Good morning My shop is a frameless shop that does both commercial and residential work. My ...

    Re: Machinery
    A message posted at WOODWEB's Adhesives Forum (10/31) -- About 8 years ago I was @ the IWF show and looked @ edgesanders. PowerMatic was there and ju ...

    Re: Machinery
    A message posted at WOODWEB's Adhesives Forum (10/31) -- Thanks for the heads up, Larry. I'm actually replacing a Grizzly edgesander (smaller model). ...

    Re: Banding
    A message posted at WOODWEB's Adhesives Forum (10/31) -- We haven't had any problems with the multi-layer veneer banding 1.6+-, that we know of. We u ...

    Re: Machinery
    A message posted at WOODWEB's Adhesives Forum (10/31) -- 32" X 78" OA you could save 11" if you took the end table & support brack ...

    Re: Machinery
    A message posted at WOODWEB's Adhesives Forum (10/31) -- Just what I couldn't find out on the mfg's websites. Thanks for the info. ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (8/31) -- Hi Scott, Sorry for the delay in getting back you - IWF has been all-consuming for the last m ...

    Re: Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (8/31) -- I suspect that when the vacuum bag engages the top of the convex sections friction builds so ...

    Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (8/31) -- I have also posted this in the veneer section. I am having difficulty pressing an inside curv ...

    Re: Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (8/31) -- The platen would be my answer. We just pressed a bunch of ribbon shapes that sound similar. n ...

    Re: Any difference in appearance by using acrylic glue in polyester
    A message posted at WOODWEB's Adhesives Forum (8/31) -- Bonds the same as acrylic solid surface but appears slightly shinier if you get a wide joint. ...

    Re: Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (8/31) -- I like to use epoxy for this kind of work because it is as slick as grease and allows the par ...

    Re: Solid surface couter edge
    A message posted at WOODWEB's Adhesives Forum (8/31) -- Always silicone to any other substrate. Epoxy for staron to staron joints only. ...

    Edgebander Glue
    A message posted at WOODWEB's Adhesives Forum (8/31) -- I HAVE 3 EDGEBANDERS 2 HOLZHER CONTRIGA 1368, AND ONE BIESSE ROXYL 5.5. WE ARE USING DORUS 21 ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (8/31) -- the film on the back of the laminate is your issue. As far as i know you will always need to ...

    Re: Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (7/31/22) -- I've got zero experience bonding cork to anything. The epoxy eats it got me interested. Ep ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/31) -- Alternating the growth rings simply gives you a sine wave table top when it moves. I have see ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (5/31) -- Update….Just ran into a small hiccup on a job and needed to apply some PVC banding to a coupl ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (3/31/23) -- Been happening since I can remember. We bought the machine new from China about a year ago ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (3/31/23) -- I have a glue gate on my bander, the adjustment is real touchy between not enough glue and ...

    PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (3/31) -- Have new holz -her bander 1329 sprint.Would like to know any one out there using PUR ? are be ...

    Re: laminate glue
    A message posted at WOODWEB's Adhesives Forum (3/31) -- Water Based contacts are the best bond, most economical to use, especially for flat non-postf ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/31) -- The GlueLam beams work because they effectively negate each of the defects in the wood. You c ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/31) -- The advantage of a commercial glu-lam beam is that the gluing process is well controlled, giv ...

    Re: solid surface join problem
    A message posted at WOODWEB's Adhesives Forum (3/31) -- joints likely dirty, surfaces should be cleaned first with denatured alcohol (rubbing alcohol ...

    Re: Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (1/31) -- Have a look at the edge banding after you pull it off. How much wood fibre is stuck in the gl ...

    Re: Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (1/31) -- Thanks Mark, Maybe I've been doing this wrong... how long should I be waiting to do the pull ...

    Re: Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (1/31) -- For me personally I wouldn't be so concerned with glue temp as I would quantity. I will try a ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/31) -- We have been doing poured epoxy on odd shaped tables which can't take the bend of wood and ar ...

    Spray adhesive causing problems with "no file" laminate trimmers?
    A message posted at WOODWEB's Adhesives Forum (1/31) -- We are having a problem that we suspect is rooted in the use of solvent based aerosol contact ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/31) -- I'm convinced that the issue is the ipe. I've made things out of Ipe, and I've seen lacquer ( ...

    glue squeeze out
    A message posted at WOODWEB's Adhesives Forum (1/31) -- i use tite 2 glue . how do you deal with glue squeeze out ??? do you let it dry than try to s ...

    Alaskan Yellow Cedar
    A message posted at WOODWEB's Adhesives Forum (1/31) -- I am going to be gluing up a bunch of 22" wide 3/4" thick panels of AYC Is there an ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/30) -- Just like the one you have, the newer Gannomat clamps run on "electric screw" aka ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/30) -- High Volume and 20 minute clamp times don't compute. Neither does spending two days to finis ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/30) -- The reason for the lengthy dry time is the amount of time/length the unit travels after they ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (11/30) -- In my opinion, epoxy has the best combination of properties for this application in the low ...

    The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (11/30) -- Certainly, epoxy adhesives are excellent adhesives, but it seems that many users forget one ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (10/30) -- Saw dust and CA glue both can be effective to fill the gap. ...

    Re: Mechanical glue spreader
    A message posted at WOODWEB's Adhesives Forum (10/30) -- Dave, I agree with Chris. I have one of the Quick glue spreaders and they work ok, but the c ...

    Contour edgbanding
    A message posted at WOODWEB's Adhesives Forum (10/30) -- I have a SNX semi-automatic contour edgebander. I have been asked by a customer to use Dorus ...

    Re: Contour edgbanding
    A message posted at WOODWEB's Adhesives Forum (10/30) -- I use Dorus 205 and stick with the manufacturers recommendation. (linear edge banding) You m ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/30) -- Single Frame? Not hundreds or thousands? This does not sound like a person will be able make ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/30) -- David, We have always used epoxy for all true exterior stuff. No need to de oil cedar or redw ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/30) -- You are correct Jim. I would describe the plantation as dry. Kind of boring grain patterns as ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/30) -- A friend said that TB 1 also comes out of clothes...big plus. Thanks ...

    Diluent for pressed wood glue
    A message posted at WOODWEB's Adhesives Forum (8/30) -- Hello everyone, I'm trying to find a Diluent to get rid of a glue that is used in making pres ...

    Re: Tite bond
    A message posted at WOODWEB's Adhesives Forum (8/30) -- How much glue are we talking about? 50 gallons? Did it freeze in transport or for a week. If ...

    Re: Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (7/30) -- Peck Tool miter clamps. ...

    Re: Combi Core Plywood
    A message posted at WOODWEB's Adhesives Forum (7/30) -- 8011 aluminum foil is used of medicine sealing, Mingtai can produce 8011 aluminum foil for me ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (7/30) -- 3005 aluminum sheet is key products of Mingtai Aluminum, the quality is good, welcome to orde ...

    Re: adhesives over finishes
    A message posted at WOODWEB's Adhesives Forum (7/30) -- Mingtai Aluminum can provide 3104 aluminum sheet with good price, welcome to order! ...

    Re: Mechanical glue spreader
    A message posted at WOODWEB's Adhesives Forum (5/30) -- Irsauctions.com 6/3/2020 https://www.irsauctions.com/popups/paddle/?lot 417302&auction 8E ...

    Glueing exterior cedar shutters
    A message posted at WOODWEB's Adhesives Forum (5/30) -- A customer of mine would like me to produce custom exterior cedar shutters. One of my concern ...

    Re: Glueing exterior cedar shutters
    A message posted at WOODWEB's Adhesives Forum (5/30) -- What was the nature of your poor luck with TB III ? ...

    Re: Glue up panel, then paint
    A message posted at WOODWEB's Adhesives Forum (4/30) -- Should be fun if you are trying to get a nice slip joint with the panel tongue/slot. ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/30) -- Mark B, I agree as well with having the glue come in the sealed bag the way box wine comes. I ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/30) -- Buy a 35 dollar barrel pump from Harbor Freight.They work great for about a year or so. Then ...

    Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (3/30/23) -- I have an edgebander with a glue roller. The problem is that glue builds up at the roller ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (3/30/23) -- Did this happen recently, or was is progressivley worse? How may meters on that roller and ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (3/30/22) -- Formica exterior grade golden glue, that's all we use and it is excellent glue. We make fu ...

    Re: Lacquer thinner on plywood
    A message posted at WOODWEB's Adhesives Forum (3/30) -- Sometimes a light sanding will remove the adhesive. ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (3/30) -- You need to buy labels with a removable adhesive. If you have large volumes you can get custo ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/30) -- I will assume in good faith that you are a skilled contractor, and you probably have a sense ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/30) -- all very good points,,,,, I was hoping an engineer would post here. I have engineered plans f ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/30) -- The benefit of working with an engineer is that you will get paper documentation containing a ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/30) -- Remember: Just because you can doesn't mean you should. Urethane would be a terrible choice. ...

    Re: solid surface join problem
    A message posted at WOODWEB's Adhesives Forum (3/30) -- Perhaps the manufacture has a tech line? Call your distributor and tell them that you are hav ...

    solid surface join problem
    A message posted at WOODWEB's Adhesives Forum (3/30) -- Hi, I just stared working solid surface and I am having problems with joins. The material I a ...

    Re: Seeking adhesive suggestion
    A message posted at WOODWEB's Adhesives Forum (1/30) -- 3m VHB tape. They sell all kinds of sizes on Amazon. It’s insanely strong. It is structural d ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/30) -- Plastisizers used in the PVC edge band actively migrate into EVA and PVA adhesives reducing a ...

    Re: gluing solid wood together that will be bent
    A message posted at WOODWEB's Adhesives Forum (1/30) -- I typically use plastic resin glue (weldwood), or urea formaldehyde (unibond 800). Second cho ...

    Re: gluing solid wood together that will be bent
    A message posted at WOODWEB's Adhesives Forum (1/30) -- Most any glue will work for "Slight" curve as he is asking about. The trick on any ...

    Re: gluing solid wood together that will be bent
    A message posted at WOODWEB's Adhesives Forum (1/30) -- uniform tight fit and adequate clamping pressure is "woodworking 101" ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/29) -- I have four. A JLT plate spreader A JLT stile spreader A Black Brothers 10 inch roller sprea ...

    Plastic Laminate adhesive
    A message posted at WOODWEB's Adhesives Forum (12/29) -- Happy New Years everyone. I am looking to build a plastic laminate top for my daughter. I wa ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/29) -- "We are a very large manufacturer and currently use a standard yellow wood glue, which ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/29) -- One way you can speed up production with out changing glue is by the way you unload the box ...

    Re: HELP....I am trying glue cedar to metal outside
    A message posted at WOODWEB's Adhesives Forum (12/29) -- All the local 'custom' houses have had garage doors made with cedar ticky-tackied onto them ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (11/29/21) -- I gave up on plastic resin glue due to temp issues. Not only thermostat, but wood, glue, ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (11/29) -- There is no consensus on this forum, however, there is plenty of successful techniques gluin ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (11/29) -- Consider which of your glue options have water and which do not. Water based glues will move ...

    Mechanical glue spreader
    A message posted at WOODWEB's Adhesives Forum (10/29) -- I need to find a glue spreader like this one for laying up butcher blocks and panels. Fed up ...

    Re: Ayen Dupo TE 2-8 Glue and Dowel Inserter
    A message posted at WOODWEB's Adhesives Forum (10/29) -- If you still have the Ayen TE-2-8, I would be interested. Where are you located? ...

    Re: Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (10/29) -- General Finishes seems like a sucker brand for amateurs. Very overpriced in my experience. ...

    Gluing Cristallo hinges to mirror
    A message posted at WOODWEB's Adhesives Forum (10/29) -- Has anyone had experience using the glue to glass or mirror Cristallo hinges? I'm contemplat ...

    Re: Corian bulk kits
    A message posted at WOODWEB's Adhesives Forum (10/29) -- The Wilson art and Hi Macs seem to be fine. Only the Corian large bulk kits have been giving ...

    Re: Corian bulk kits
    A message posted at WOODWEB's Adhesives Forum (10/29) -- What adhesive are you using? In a gun with mixer tips? I've had this problem with catalyst n ...

    Machinery
    A message posted at WOODWEB's Adhesives Forum (10/29) -- Looking to buy powermatic 138" edge sander. Anyone out there know the footprint dimensi ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/29) -- I never use epoxy, that's good to know. All my work is solid wood furniture so I use titebond ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Pete, One thing to watch out for, is that the drying can be very slow in some of these very r ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Keith, thanks for the heads up. I researched a little more and found no definitive answers ot ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Pete, I use quite a bit of epoxy, but not for edge gluing. The molecules are too large to act ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- David, Epoxies aren't solvent adhesives, and most aren't particularly good on oily woods as t ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Addendum: Am I correct in thinking that epoxy (and other solvent base glues - resorcinol, oth ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Good point David; I have been using unibond 800 for all other parts of door so perhaps that i ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/29) -- Am I imagining this or is the plantation teak today far less oily than old growth Burma teak? ...

    Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (6/29) -- Has anyone found an automatic door bottom ( lowers when door is closed) that works well and l ...

    Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (6/29) -- So what is the best option here? I want to bond a 3/8" slab of highly figured burl to a ...

    RE: strong resinous smell from particleboard
    A message posted at WOODWEB's Adhesives Forum (6/29) -- Hi there, One furniture maker in China recently complained about strong resinous particleboar ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (6/29) -- I was hoping you'd see this Leo. I am in school at night in addition to working my usual 60, ...

    Re: Wood adhesive for blue gum
    A message posted at WOODWEB's Adhesives Forum (6/29) -- The only glues that set that fast are PUR adhesives. ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/29/25) -- I use the vacuum Table on my CNC to clamp 4 x8 sheets pulling 22 inches of Vacuum Works ve ...

    Re: Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (5/29) -- I do the same thing when I use UF glue in a vacuum bag, except I use electric heating blanket ...

    Hot Melt Web panel machines
    A message posted at WOODWEB's Adhesives Forum (5/29) -- Does anyone have or have any experience with a Hotmelt web application machine? Essentially t ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (5/29) -- When I veneered the topsides of my Starboat I pre-stained the 3/32" mahogany veneer with ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (4/29/25) -- For veneer adhesion issues, selecting the right adhesive is crucial. For hot pressing, con ...

    Re: Glue up panel, then paint
    A message posted at WOODWEB's Adhesives Forum (4/29) -- Assuming they will be 3/4" thick, keep an eye on RH before, during and after glue up. Av ...

    Re: Glue up panel, then paint
    A message posted at WOODWEB's Adhesives Forum (4/29) -- I would educate my customer and use MDF. ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/29) -- My guess is the make up air thats coming into the barrel as you pour off over time is enough ...

    Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/29) -- For years we dispensed blue from a barrel by putting an elbow in the bung with a length of PV ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/29) -- The knife style is the only other style Ive seen for viscous materials. I wonder when the glu ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/29) -- We have used glue in barrels for years and never had this problem even when we went through g ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/29) -- I agree. ...

    Re: epoxy glue for solid edge plywood
    A message posted at WOODWEB's Adhesives Forum (3/29) -- You might consider a different glue. Epoxy typically leaves a black line at the joint. It won ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/29) -- 24 foot spans? polyurethane (aka Gorilla Glue) are regarded as poor woodworking glues. They a ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/29) -- A structural laminated beam will typically use phenol-formaldehyde or resorcinol-formaldehyde ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/29) -- Listen to Mike S. Very important... If it's structural.. http://williamolsendesigns.com/ ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/29) -- Typical woodworking adhesives that are stronger than wood: PVA, resornical, epoxy, polyuretha ...

    Adhesive for Kebony
    A message posted at WOODWEB's Adhesives Forum (1/29) -- We are bidding a project that has a lot of Kebony woodwork in it. I went to their site and di ...

    Re: Adhesive for Kebony
    A message posted at WOODWEB's Adhesives Forum (1/29) -- Google "Kebony Glue" and the first hit should be a PDF that speaks to gluing and co ...

    Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (1/29) -- I have a lower end edgebander, which I asked some questions about on here a month or so ago. ...

    Re: Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (1/29) -- I would increase your glue flow until your bander begins to stop being able to clean it up th ...

    Adhesives
    A message posted at WOODWEB's Adhesives Forum (1/29) -- What adhesive should I use to glue Formica to wood paneling? I need to be able to slide the F ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (12/28) -- Bill is correct. 3m 5200 is a bombproof poly adhesive/sealant that has been used in the mari ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (12/28) -- Thank you Adam I will buy it Stefano ...

    Re: HELP....I am trying glue cedar to metal outside
    A message posted at WOODWEB's Adhesives Forum (12/28) -- Some people might call this a "fool's errand". However, luck seems to like fools f ...

    Re: HELP....I am trying glue cedar to metal outside
    A message posted at WOODWEB's Adhesives Forum (12/28) -- thanks for reply. I have planed all the boards to 7/16" and i am going to slot or " ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (11/28/21) -- If imy memory is correct you are in Sask. The first culprit for PPR is too cold to cure p ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (11/28/21) -- Tom, that is one of my suspected issues. Going to repeat with more heat. ...

    Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (11/28) -- Hi, We are making tabletops that have a veneered panel at the center and a mitered solid woo ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (11/28) -- i do this very thing fairly frequently, and would strongly suggest a urea resin glue. i use ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (11/28) -- I bought the resorcinol and a digital scale to weigh it. 5 to 1 by wt. The stuff sets up har ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (11/28) -- I second "Bruce Hadley's book." And The Wood Doctor's also. Seems you likely have ...

    Re: Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (11/28) -- I wonder how well melamine glue would work? I'd still scuff the UV. ...

    stainless steel portals and wall panels on mdf
    A message posted at WOODWEB's Adhesives Forum (10/28/21) -- The project has 3/8" stainless steel wall panels on 3/4" mdf at portals, walls ...

    Re: stainless steel portals and wall panels on mdf
    A message posted at WOODWEB's Adhesives Forum (10/28/21) -- I would use a stud welder and weld studs to the backside of the stainless panels, bore ou ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (9/28) -- Coming to this thread a little late... We do have 275 gallon totes with the bag in (plastic) ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (9/28) -- The 5-7 minutes of open assembly time is correct. However, If you can put the resorcinol down ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/28) -- Bottle brush is your only good option. I wouldn't be too concerned about it. Dowel holes and ...

    Re: Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/28) -- Thoroughly recommend Smiths Oak and Teak epoxy for this. Normal epoxy gap filling and easy fi ...

    Adhesive strength.
    A message posted at WOODWEB's Adhesives Forum (9/28) -- Many PVA glues come with a tag "Stronger than Wood". What minimum glue strength is ...

    Re: Recommendations for High-Performance Woodworking Adhesives
    A message posted at WOODWEB's Adhesives Forum (8/28/25) -- For combinations common in industrial woodworking (solid wood, laminate, solid surface), a ...

    1443 Holzher / PUR hot melt
    A message posted at WOODWEB's Adhesives Forum (8/28) -- I recently acquired a holzher Accord 1443 edgebander. I'm in the process rebuilding the 1907 ...

    Tite bond
    A message posted at WOODWEB's Adhesives Forum (8/28) -- I was wondering if anyone knows or has done any tests with tightbond that froze. I know the c ...

    Re: Tite bond
    A message posted at WOODWEB's Adhesives Forum (8/28) -- Why don't you test your glue. Make some samples of what you typically use the glue for and co ...

    Re: Tite bond
    A message posted at WOODWEB's Adhesives Forum (8/28) -- Tom, I thought about that and that is a great idea, I thought maybe someone had already done ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/28) -- reading some of the responses I didn't give all the details. As some of you have said there a ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/28) -- I think you've found the answer "solvent based cleaners." Bit by bit they penetrate ...

    Re: Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (7/28) -- If the cuts are straight and the dry fit is good, you can use clear packing tape and glue it ...

    Re: Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (7/28) -- Not overly difficult? Spline, dowels, biscuits, domino, alternating clamps? ...

    Pizzi Gluing System Maintenance
    A message posted at WOODWEB's Adhesives Forum (7/28) -- Recently, we've gotten questions about how to properly maintain the Pizzi gluing machines and ...

    Wood adhesive for blue gum
    A message posted at WOODWEB's Adhesives Forum (6/28) -- Good day all Please assist, we are working with blue gum and to increase our production what ...

    Re: Recommendations for High-Performance Woodworking Adhesives
    A message posted at WOODWEB's Adhesives Forum (5/28/25) -- Because you need to bond different materials, you may need a mixture of multiple types of ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/28/25) -- A vacuum bagging system may be suitable for this project. The vacuum creates uniform atmos ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (5/28) -- I have an ancient Holzer from my Dad that we've been using for a long time. I can't vouch for ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/28) -- I don't have much faith in melamine pva. With hpl to hpl there would be no where for the mois ...

    Re: Plane Off TiteBond III?
    A message posted at WOODWEB's Adhesives Forum (5/28) -- I have restored many century-old, elaborate apartment-building doorways, and the acetone-wash ...

    Re: Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (5/28) -- Gene where are you? I think the moisture in the glue is readily absorbed into the maple, it e ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/28) -- Did you joint the face on the jointer before running them through the planer to assure a flat ...

    Glue up panel, then paint
    A message posted at WOODWEB's Adhesives Forum (4/28) -- I am trying to produce a painted solid-color wood panel. It is for making drawer front and sl ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (4/28) -- This seems to be a perfect case for making a stave core door. We have successfully produced 1 ...

    High Heat
    A message posted at WOODWEB's Adhesives Forum (4/28) -- I'm looking to attach a filler piece below an oven that has been prefinished, so i'm not want ...

    Re: Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (4/28) -- Brian, John's right. I don't think you'll be successful trying to use your cold press with a ...

    Re: Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (4/28) -- I'm not an expert on contact cement, I avoid it in most applications, but I know you will sti ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- Thanks Adam. The low clamping pressure requirement and gap tolerance as you say are reason ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- Thanks Adam. The requirement for heavy clamping pressures is perhaps one variable which co ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- The devil for sure (and also the solution) is often in the detail. : ) I spent some years ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- In terms of wood adhesives. PVA glues like tight glue lines. You have to clamp a joint ver ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- I am reminded of the saying "Paralysis by analysis." and dealt with it myself ma ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- There's always a balance John, and many error in the other direction. That said I've as ab ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- I didn't say don't do your homework, and I'm glad you've done yours, gathered as much inpu ...

    Re: the problem sapele veneer
    A message posted at WOODWEB's Adhesives Forum (3/28) -- Can you apply the PVA and then remove it without using the newsprint. I suspect it is the adh ...

    Re: epoxy glue and spalded Maple
    A message posted at WOODWEB's Adhesives Forum (3/28) -- Spalting is the work of the white rot fungus. As a result, the strength of the wood, especial ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (3/28) -- Excellent advise so far. I would add that ipe seems to have some natural oil that makes it di ...

    Re: EDGE BANDING A PAINTED EDGE
    A message posted at WOODWEB's Adhesives Forum (3/28) -- You can leave the paint on, but when you glue, you will be gluing the paint to the other surf ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/28) -- Also, note that a commercial 2x6 is probably not ready to be glued as the surface is not perf ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/28) -- thanks Gene,,, I will be using milled lumber after I run it thru my planner, gorrilla glue or ...

    Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (2/28/25) -- Following the recent acquisition of a hydraulic hot press for our facility, we are encount ...

    What Adheres to UV Ply?
    A message posted at WOODWEB's Adhesives Forum (2/28/22) -- I need to put some 3/8" and/or 1/4" skins on 3/4" uv2s birch ply cabinet bo ...

    Re: What Adheres to UV Ply?
    A message posted at WOODWEB's Adhesives Forum (2/28/22) -- Contact cement. ...

    Re: FASTER Spray Glue techniques
    A message posted at WOODWEB's Adhesives Forum (2/28) -- Amen to what Matt said only I use STA-PUT. ...

    Re: Fastcap Wood banding on MDF? Should I?
    A message posted at WOODWEB's Adhesives Forum (2/28) -- I made several tall cabs using pb substrate perhaps 4-5 years back. The prefinished fastcap b ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/28) -- I would suggest West System Epoxy, glued up within a few hours of machining, and with light c ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/28/25) -- Your edge banding issues are likely due to your shop's low temperatures (20°F in winter), ...

    Re: Glue for PVC Edgeband manual application, 90-degree corner piecut cabin
    A message posted at WOODWEB's Adhesives Forum (1/28/25) -- We use double tape from Fast Cap. I am not exactly thrilled but it seems to work. ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (1/28) -- Glulams are much cheaper to purchase than the labor it will take for you to make your own. No ...

    Re: glue for dowel insert machine and case clamp assembly
    A message posted at WOODWEB's Adhesives Forum (1/28) -- When using a case clamp, the glue does not have to "set up." Bore & insert mach ...

    gluing solid wood together that will be bent
    A message posted at WOODWEB's Adhesives Forum (1/28) -- What is the best type of glue to use if the wood will be planed to 1/4" thisk and slight ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/27/21) -- Hi Kim, We started to use a product by Loctite.https://www.richelieu.com/ca/en/category/g ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/27/21) -- https://www.richelieu.com/documents/docsGr/120/959/4/1209594/1466670.pd Not sure if the l ...

    Re: contour edgebanding
    A message posted at WOODWEB's Adhesives Forum (12/27) -- Seems like a classic case of burned glue. Most likely caused by too high of temperature. Hav ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (12/27) -- I've got several furniture pc. I made over 30 years ago with those woods, still fine, Origin ...

    Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (11/27/21) -- Glued up some solid walnut with plastic resin which was fresh and good. Clamped for 12 ho ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/27) -- Hi Holly, I work for Rangate, the company David mentioned earlier. We do indeed have an epox ...

    Re: Adhesive for solid phenolic.
    A message posted at WOODWEB's Adhesives Forum (11/27) -- Dave we need to go 3m mil aerospace ...

    Cleaning Teak Holes For Glue up
    A message posted at WOODWEB's Adhesives Forum (9/27) -- Just drilled my dowel holes in my teak door parts but realized I won't be gluing up for a few ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/27) -- Much can be learned about failure just by looking at the glue line. It there transfer to the ...

    Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (7/27) -- I’m trying to glue up a return trim on a table top and cant think of a good way to clamp for ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/27) -- I agree with Jared about the vac bag. When you do a test run it will be obvious if the bag wi ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/27) -- You could alternatively make a big bag with plastic and tape and skip the table. I like the t ...

    dorus cartridge swelling, Hkp 25
    A message posted at WOODWEB's Adhesives Forum (7/27) -- I am looking for a document that has anything to do with Cartridge swelling or negative aspec ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (6/27/25) -- Using a vacuum bagging system may be an effective approach for this project. It ensures ev ...

    Re: adhesive advice
    A message posted at WOODWEB's Adhesives Forum (6/27/23) -- You will have to clarify what the adhesive is for. Boxes? Laminate? More information is be ...

    Re: Paper-laminated foam board to wood?
    A message posted at WOODWEB's Adhesives Forum (6/27/23) -- Pva ...

    Re: Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (6/27/22) -- What a trip to see Claremont on the back of the tiles, I went to school there years ago. I ...

    Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (6/27/22) -- I'm gluing some tiles onto plywood for a serving tray. The handmade tiles were wedding coa ...

    Re: Raw wood to prefin maple ply
    A message posted at WOODWEB's Adhesives Forum (5/27/25) -- Melamine glue can work, but it's not always the best option for bonding to factory-finishe ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/27/25) -- Tom A press or something similar is what I am looking for recommendations on. Placement, g ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/27/25) -- David I had not considered a vacuum bag, will look into that ...

    Re: Press
    A message posted at WOODWEB's Adhesives Forum (5/27/23) -- How fast do you want to press? I press at 60 deg C for 10 minutes. You can press faster bu ...

    Press
    A message posted at WOODWEB's Adhesives Forum (5/27/23) -- Hello all I am new here. I just purchased a cold/hot press by SCM and wanted to know when ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/27) -- Are you really serious about asking this or just normal post you making? Anyway, you got the ...

    Re: Moisture Content Variations Between Boards
    A message posted at WOODWEB's Adhesives Forum (5/27) -- You will be fine if your wood is between 8-10%. I never had an issue with it. maybe you need ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (5/27) -- matt, that is a pretty job your friend did... WHich glue is he using, I got some ply and want ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (5/27) -- You've already made the right choice TBII and TBIII will work perfectly. ...

    Re: how to choose a hot melt glue for edgebander
    A message posted at WOODWEB's Adhesives Forum (5/27) -- Get a KS205...Ask your supplier about it. ...

    Re: Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (5/27) -- The jack may leak off with time. ...

    Re: Aluminum foil stick to XPS foamboard
    A message posted at WOODWEB's Adhesives Forum (4/27/25) -- You can use a construction adhesive like Loctite PL300 or a similar foamboard adhesive, wh ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (4/27/23) -- Glue can generate veneer bubbles. When veneer is placed, glues with moisture can bubble. O ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (4/27/23) -- Edgebanding plam strips gives woodworking projects color and texture. The strips decorate ...

    epoxy glue for solid edge plywood
    A message posted at WOODWEB's Adhesives Forum (3/27) -- hi, i need to glue 1/4 solid birch to 3/4 plywood edges, (should dry 30min or 45 most , I don ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (3/27) -- The adhesive mentioned is a PUR. It cures using moisture in the wood. With such a dense wood, ...

    Re: Edge Gluing Hard Maple
    A message posted at WOODWEB's Adhesives Forum (2/27) -- The first thing that caught my attention was "The wood is freshly cut using new planner ...

    Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (2/27) -- We are currently spraying 3m 94 ca out of the canister type spray system. We mainly build ver ...

    Re: Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (2/27) -- I've had good success with most water based contacts when bonding laminates or poly back vene ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Activator and super glue or autobody glazing. Apply both sparingly as they both dry very quic ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Thanks for the reply Kilgore, Yes, it is known that a glue joint will be stronger than the wo ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Since you are a professional, you already know that any commercially available wood glue, pro ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/27) -- Late to this one, and know your not in the US, but we are a small shop with an older Holzher ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/27) -- TB2 is indeed water resistant, meaning that water does not dissolve or affect the glue for oc ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (1/27) -- Just like everyone else, we're going through the same thing. Seems like every week, I get a c ...

    Re: Loose p-lam
    A message posted at WOODWEB's Adhesives Forum (12/26/22) -- Im thinking the WB is your problem. Loose spots (rare for us) if they happen are dealt wi ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I think if it were me I would be inclined to try a spray contact adhesive. Contact adhesive a ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I agree with the spray contact as well though what the "raw wood" is may play a par ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- Thank you. ...

    What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I'm making laminated utensils used for cooking. What type of glue can be safe and hold up to ...

    Re: Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/26/22) -- 1 RPM motor to spin the jug. Just make a holder that spins on a bearing and a wheel to con ...

    Re: Best Wood Glue In Caulk Tube?
    A message posted at WOODWEB's Adhesives Forum (8/26) -- You might want to describe your application. ...

    Re: mdf glue with good open time
    A message posted at WOODWEB's Adhesives Forum (7/26) -- Look into PPR glues like Unibond plastic resin, or Ultra-CAT PPR. I use them in vac bag layup ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- I agree with Tom's remarks. I would add that the the (thinner) top surface should be balanced ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- Good luck with that. Whatever you do, don't use a glue with any water whatsoever. 3/16" ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- +1 for Tom's idea. Epoxy and a one-off bag from visquine & butyl tape is the way to go. ...

    adhesive advice
    A message posted at WOODWEB's Adhesives Forum (6/26/23) -- Whats the best adhesives to use for a large project of industrial cabinets . Looking for a ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (6/26) -- I've been making cedar signs with WRC for almost 20 yrs. I use LePages "Outdoor Weatherp ...

    aluminum
    A message posted at WOODWEB's Adhesives Forum (6/26) -- I want to adhere 0.04 aluminum photo print to furniture grade plywood or mdf (with edgebading ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/26) -- There are two issues that need to be addressed. First is the strength of the wood. Although y ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/26) -- Some pretty impressive work on your site Joe. ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/26) -- Tom, Epoxy for sure does not work and I think PPL is about the same result. Did some expeimen ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/26) -- I expect that you have made a decision already but... My thoughts are either epoxy or PPR You ...

    Re: Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (5/26) -- I can't give any science on this but we were using UF Glue to bond HPL to plywood using a vac ...

    Re: Veneering over solid surface
    A message posted at WOODWEB's Adhesives Forum (5/26) -- Better look at coefficient of expansion on the solid surface/ Might just move too much and sp ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (4/26/22) -- I was using an urethane glue that came in a calking tube. Misted water on the parts, appli ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (4/26) -- The adhesive used for all of those tapes are heat activated. Use a hair dryer (not a heat gun ...

    Re: High Heat
    A message posted at WOODWEB's Adhesives Forum (4/26) -- There are lots of choices: https://www.google.com/search?q heat+resistant+adhesive&oq hea ...

    Re: PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (4/26) -- I have a Pur hot glue gun which I never use anymore. It leaves a black line at the joint. I h ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (3/26/23) -- If you don't cut the pieces before priming them, you'll have shards all over them, and pri ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/26/22) -- Here you go. West System (Gougeon Brothers) pioneered the use of typical West 105 resin sy ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/26/22) -- Thanks Adam. That's good information - and good news since I've gone ahead and bought some ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/26/22) -- Ian, The Gougeon Brothers started doing bond down decks in the mid 1980’s(40 years). The v ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/26) -- Probably 99.9% of 8/4 oak is dried by air drying first. So, if the weather for one month is v ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/26) -- I buy from three different hardwood suppliers and a significant amount of the the 8/4 is HC. ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/26) -- I only buy Appalachian. One of the suppliers I buy from Netterville in Mississippi has a larg ...

    Re: Combi Core Plywood
    A message posted at WOODWEB's Adhesives Forum (2/26) -- Ewww, I hate veneering on MDO! Andy, are you not in Atlantic Plywood's service area? If you a ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/26) -- Bruce, I tried this and man does it ever set fast. New rule of thumb for sure. Using masking ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/26) -- You have gotten good advice from very knowledgeable woodworkers. Heed it. I don't know what y ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/26/23) -- yep - to echo what was said, wrong glue. i would suggest a urea resin, i use unibond with ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/26) -- How about a strip of high-strength double-stick tape around the edges, which would be covered ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/26) -- I also recommend thin CA glue. ...

    glue for dowel insert machine and case clamp assembly
    A message posted at WOODWEB's Adhesives Forum (1/26) -- We are new to running a dowel insert machine and using a case clamp. I am looking for some in ...

    Re: Removing adhesive stain from wood door
    A message posted at WOODWEB's Adhesives Forum (1/26) -- I would add that many woods, mahoganies included, will oxidize with exposure to UV. This usua ...

    Re: Removing adhesive stain from wood door
    A message posted at WOODWEB's Adhesives Forum (1/26) -- I agree with David and did not think of this possiblity. ...

    Re: Proper adhesive for curved ply panels
    A message posted at WOODWEB's Adhesives Forum (1/26) -- Thanks for the response Walter. The material is most likely called bending mahogany and consi ...

    Re: Proper adhesive for curved ply panels
    A message posted at WOODWEB's Adhesives Forum (1/26) -- The powdered resin glue is supposed to be more rigid over time than any PVA and therefore hol ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (12/25/24) -- In 41 years of stair & millwork I have had only 2 Tite bond failures. Both were when ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/25/21) -- You are doing everything as good as it can be done. Why do you want to switch to TB3. Epo ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/25/21) -- Yes, We are sticking with epoxy . Just thought to ask if there were other options. We had ...

    Re: Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (11/25) -- Thanks Steve. After many tests we found that, as you said, most glues failed even with scuff ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/25/23) -- Powdered Urea Resin was the go to in outside/marine applications. ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (10/25) -- There are a couple of questions and answers. 1 What type of glue. Resorcinol is the only glu ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (9/25/24) -- PVA or polyvinyl acetate generally known as wood glue is more appropriate for woodworking ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/25) -- Hi Daniel, If by high humidity you are talking about wood movement due to humidty changes, yo ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/25) -- This is in a sub-tropical area, the substrate is wood with no treatment, the veneer is thin p ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/25) -- What are the details of the application? What is a high humidity area? Steam shower? Tropical ...

    Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/25) -- What is the best adhesive to adhere a thin plastic veneer to an unvarnished, natural wood pic ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/25) -- By thin plastic I mean as thin as a sheet of 24 lb paper, ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/25) -- I have just been thru a 2-3 month trial/tribulation on gluing Western Red Cedar. It started a ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/25) -- Its been made obsolete. I never found it to be great for exterior use. It could probably be u ...

    Flammable Contact Cement & OSHA Ristrictions
    A message posted at WOODWEB's Adhesives Forum (9/25) -- We have been using a non-flammable spray contact cement for the last 3 years to comply to OSH ...

    Re: ADHESIVE FOR BONDING LEAD SHEET TO WOOD
    A message posted at WOODWEB's Adhesives Forum (8/25) -- Thanks, I'll give it a try. - Matt ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/25) -- Wilsonart makes a PVA that has a very rigid glue line. When it dries it sands like wood. Not ...

    Re: spraying contact cement
    A message posted at WOODWEB's Adhesives Forum (7/25) -- According to CA TIP 1.5 and air cap 2263 for old school glue and 1.5 tip and air cap 2266-3T ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (7/25) -- Chris, What does that glue system cost, the video looks fairly slick. I just use tape and tig ...

    Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/25) -- I'm currently building an indoor bench that is about 20' long by 2' wide and .5' thick. The c ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (4/25/22) -- The Heat Lock is rock solid, the one concern is use caution on two points. Don’t get the H ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (4/25/22) -- Interesting post i love it keep posting more! ...

    Re: Seeking adhesive suggestion
    A message posted at WOODWEB's Adhesives Forum (4/25/22) -- awesome post i love it keep posting more! ...

    Re: Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/25) -- i dye PVA all the time with transtint. works perfectly. ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (4/25) -- In every event where I could feel the joint on a butcher block or similar glue-joint, I was c ...

    Re: Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Any particular reason you are using 3mm thick veneer, other than to cut in-house? I can't ima ...

    Re: Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Thanks for your input, i was thinking urea resin glue i believe when i was righting that post ...

    Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Hey Guys, Does anyone have any experience with pressing laminate onto substrates such as ligh ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- I do mainly wood & wood veneers, so I use HPL and other materials needing CC sparingly. I ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/25) -- We have a 5X10 vacuum frame press and for flat materials (no stress) 30 minutes. Could probab ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Thanks Larry, so seems like the developing consensus is I'm wasting time leaving parts for se ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Hmm... This seems contrary to a thread that I saw on this site.. Wish I would have gone the o ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- I spray the same as Andrew as I shoot infrequently. Pressure pot may be better for daily shoo ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/25) -- JeffD is spot on in his remarks. The simpler solution is to use 1" poplar as your framin ...

    Re: Stainless Steel to Partical board
    A message posted at WOODWEB's Adhesives Forum (4/25) -- We also do a lot of this. The heat from lights is a no win situation. The metal moves a lot c ...

    Re: Lacquer thinner on plywood
    A message posted at WOODWEB's Adhesives Forum (3/25) -- I use lacquer thinner all the time on UV plywood and never had a problem. I haven't tried to ...

    Re: Wood Epoxy
    A message posted at WOODWEB's Adhesives Forum (3/25) -- I have several furniture manufacturers that use this, no reason it can't be used for your pur ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (3/25) -- How do you get UV light in the joint? If it cures in one second you can't expose it and then ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Good point Larry, I can hardly wait for the answer. Mark ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- You should not have more than 3% honeycomb in oak, so you comments about 20% indicate that th ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- You mention the honeycomb in 8/4 Oak, and that is a drying problem. It stands to reason (mayb ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Others know better than I, but I believe the honeycomb is a defect of the drying process, in ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- David I dread whenever I get an order for oak. Probably 20% of the 8/4 shows signs of honey c ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Thanks to all for your comments. This has happened before as I said particularly with oak and ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/25) -- Hi all, So I decided to call CP Adhesives to get some more info on their resorcinol. First, I ...

    exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/25) -- Hi all, getting ready to build an quarter sawn old growth redwood exterior door. The door wil ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/25) -- It sounds like there wasn't enough glue or the clamping was indequate, uneven, or too late. T ...

    Re: Removing adhesive stain from wood door
    A message posted at WOODWEB's Adhesives Forum (1/25) -- Try alcohol first (on the wood, not in you)! The issue is going ot be adsorption of stain and ...

    Re: High MC and Pva
    A message posted at WOODWEB's Adhesives Forum (1/25) -- Add a little heat to help the moisture move away from the joint quickly. ...

    Re: Gluing Cristallo hinges to mirror
    A message posted at WOODWEB's Adhesives Forum (12/24) -- I'm not sure if you can use it for your application. We've had to use the Cristallo only onc ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/24) -- I agree 100% with Larry using any white glue and you can have the cabinet out of clamp in as ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/24) -- If its not wood then why use a pva wood glue? Beyond wood its only good for paper and no loa ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/24) -- There is a tendency with a light weight wood like cedar to use too much pressure. We never c ...

    Re: exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/24) -- Resorcinol, which is really RF, is best. UF, TB III and PUR are not too bad either. All have ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/24) -- Ditto on what Jeff and Ken said about color. In my experience, it is usually the poor prepar ...

    Re: Bubbles
    A message posted at WOODWEB's Adhesives Forum (9/24/24) -- Im facing the same issue. ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- You can also buy their speed tape direct from FastCap.com 3M also makes a really impressiv ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- we found this stuff and were going to give it a try. But yes iron on application. Trying t ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- We're looking for a tape that is heat sensitive so it only adheres when heated not stick o ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- All tapes are heat sensitive. Are you looking for some sort of edge banding hot melt adhes ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- Fastcap. From Richelieu Hardware ...

    Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Has anyone had any issues edge gluing exotic lumber like Purple Heart and Gonçalo Alves/tiger ...

    Re: laminate glue
    A message posted at WOODWEB's Adhesives Forum (9/24) -- I use Weldbond pva glue (Canadian) for all my high pressure laminating. There is a similar pr ...

    Re: spray adhesives containing methyl chloride - standard precautions?
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Gavin, If you look at the Threshold Limit Value published by the ACGIH it indicates that any ...

    Re: spray adhesives containing methyl chloride - standard precautions?
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Gavin, You should consult the MSDS for the product. Your employer is required to have this on ...

    Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Titebond 1: indoor Titebond 2: water resistant Titebond 3: water proof What is a reason for u ...

    Re: casement window weatherstip
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Hi Mike, would you say the newer EPDM or TPE type gasket may do? 3/16" would be a tight ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Thanks everyone for your advise which I totally followed and the results were perfect. Thanks ...

    Re: ADHESIVE FOR BONDING LEAD SHEET TO WOOD
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Hey Matt, We've used contact adhesive in the past. Cheers Marty ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (7/24) -- Well, it is a question for newbies which I feel is good for sharing. When I first started on ...

    mdf glue with good open time
    A message posted at WOODWEB's Adhesives Forum (7/24) -- I normally use various tight bond glues for most of the work I do. I want to build some inter ...

    Paper-laminated foam board to wood?
    A message posted at WOODWEB's Adhesives Forum (6/24/23) -- Seems many things would work for this, but I have no experience adhering anything to foam ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (6/24) -- Out of the glues that you have listed there the polyurethane glue would likely be the best. ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/24) -- Cedar doesn't have much structural strength, and can be brittle around knots. You should chec ...

    Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (5/24) -- Howdy, I glue up 2" recycled fir and oak doors with Vacuum bags using UF glue. We have b ...

    Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/24) -- I would to color pva adhesive a dark brown-black color for reclaimed wood laminations. I am u ...

    Re: Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/24) -- You can dye PVA with no problem. There are a number of appropriate dyes at www.veneersupplies ...

    Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Hi all, I have been producing doors for sometime now and have been using a standard PVA for a ...

    contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Need some help. I refurbish a variety of different items with hpl. Decided to get away from b ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Jeff -- Generally, you should use the same clamp time you would use in a clamped glue-up outs ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Hmmm, so no special considerations for the glue being sealed in an air tight bag? I guess I j ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/24) -- At least two look like alder. ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Right, so when you mount the hinges what are the screws grabbing to hold up that heavy door? ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/24) -- If your saying your going to be mounting the door to the 1/2" poplar and possibly mdf be ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Jeff, Just to clarify. My intention is to laminate mdf and plywood to about 2.5 - 3 inches th ...

    mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/24) -- I am building a solid "soundproof" door consisting of multiple layers of 3/4 mdf an ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/24) -- I think where JeffD is going about the MDF/Ply holding the long screws is that there isn't a ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (3/24/22) -- One hour or even faster curing epoxy comes to mind. John ...

    Wood Epoxy
    A message posted at WOODWEB's Adhesives Forum (3/24) -- I was in the furniture restoration business for 35 years and injected Acraglas to fix chairs ...

    Re: Wood Epoxy
    A message posted at WOODWEB's Adhesives Forum (3/24) -- Never used it but you could give this a shot if you are in a pinch? ...

    UV epoxy drying
    A message posted at WOODWEB's Adhesives Forum (3/24) -- Hi, anyone used the UV epoxy? Recently my client want to buy a UV led drying machine from us, ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (3/24) -- I have only seen this on softer woods like pine and bass. I chalked it up to the wood shrinki ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (3/24) -- I think the UV glue may be a good choice. UV glue could be cured by UV light in 1s. would you ...

    Re: Type of Glue for HPL
    A message posted at WOODWEB's Adhesives Forum (3/24) -- uv glue may be a better choice, it will be cured by uv light in 1 second. ...

    Re: glue
    A message posted at WOODWEB's Adhesives Forum (3/24) -- You would be a lot happier going to dowels when using a case clamp. 10 minutes is a long cycl ...

    the problem sapele veneer
    A message posted at WOODWEB's Adhesives Forum (3/24) -- hi all, I have a problem with sapele veneer. What strikes me is the following, prior to gluin ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/24) -- A three piece glue up adds to machine time and detracts from the appearance. I think it is a ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/24) -- Would a 3 piece lamination work better? Odd number of laminations for balance? It sure wouldn ...

    Re: glue
    A message posted at WOODWEB's Adhesives Forum (3/24) -- Thanks Larry , yes we are going to make the switch to dowels ASAP.But that could be awhile. T ...

    Re: Edge Gluing Hard Maple
    A message posted at WOODWEB's Adhesives Forum (2/24) -- The only thing you didn't mention is the time between machining and glue up. Another possibil ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/24) -- I use super glue for this sort of repair. I'd spray some activate onto the surface and into t ...

    Re: casein glue
    A message posted at WOODWEB's Adhesives Forum (2/24) -- Thank You, I didn't use the glue as I had a feeling it was too cold. ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/24) -- Seconds before spreading the adhesive, wipe the surface (safely) with a solvent. Use the wate ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/24) -- Another thought is that you have clamps at the ends of a piece. When you tighten the clamps, ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/24) -- Thank you for all the replies. I will take all this into account. ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/24) -- CP Adhesives sells Aerodux Resorcinol. It's the only glue strong enough to to be certified fo ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/24) -- Thanks Nick that is really helpfull ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/24) -- I have always used wood glue for cane in seats mostly. If the cane gets stretched tight and e ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/24) -- Ipe is a terrible wood for anything other than decking. Even that is debatable. Epoxy doesn't ...

    Loose p-lam
    A message posted at WOODWEB's Adhesives Forum (12/23/22) -- Just wondering what your adhesive of choice is for loose plastic laminate repairs. Every ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (12/23) -- 3m makes a polyurathane adhesive that would bond the material. What you are describing would ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (12/23) -- Thank you Bill, you are right, in fact I had the problem after one month. Do you know the mo ...

    HELP....I am trying glue cedar to metal outside
    A message posted at WOODWEB's Adhesives Forum (12/23) -- I have possibly a foolish project i am starting. I have a bunch of old cedar 3/4" board ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/23) -- We use resorcinol for exterior work. Good glue but doesn't solve the moisture problem. I wil ...

    Re: Glue for plastic
    A message posted at WOODWEB's Adhesives Forum (11/23) -- West System G/Flex epoxy Don’t be turned off by the cost or the little bottles. It’s a one o ...

    Re: Glue for plastic
    A message posted at WOODWEB's Adhesives Forum (11/23) -- You will find all kinds of uses for g/flex in the future. ...

    Re: adhesives
    A message posted at WOODWEB's Adhesives Forum (11/23) -- Loctite has a crystal clear construction adhesive that may be worth a test. ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/23) -- We gravitated away from 5 min epoxy long ago. Now using west systems epoxy for higher end ap ...

    Re: adhesive for wall sheathing on houseboat?
    A message posted at WOODWEB's Adhesives Forum (11/23) -- This is not rocket science and your weldwood brown is fine. If you're really worried over fl ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/23/23) -- About 25 years ago I made a set of curved handrails to replace existing on the front step ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/23/23) -- Thanks to you both. As tempting as it was, my gut was telling me no to Tite Bond III.Than ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/23/23) -- Epoxy. Such as.West System or System 3. ...

    Re: red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/23) -- The only way it can dry in the lines or gun is if you have a leak that lets air in. The gun ...

    Re: red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/23) -- Larry, Which Henkel product are you using? Does it ever dry up in the lines of the gun? Can ...

    Re: Fillers.
    A message posted at WOODWEB's Adhesives Forum (10/23) -- Dustin, I would think about epoxies as an example. Not so much in the woodworking sense as m ...

    Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/23/21) -- I'm looking for a roll of 2" adhesive that acts as the adhesive for non preglue edgin ...

    spray adhesives containing methyl chloride - standard precautions?
    A message posted at WOODWEB's Adhesives Forum (9/23) -- I was wondering what type of precautions would be considered standard while using a spray adh ...

    Re: Raw wood to prefin maple ply
    A message posted at WOODWEB's Adhesives Forum (9/23) -- The reason for the strip is to have a doubly strong connection from cab back to top. Screws a ...

    Adhesive For Bonding Lead Sheet To Wood
    A message posted at WOODWEB's Adhesives Forum (8/23) -- Hello, I want to bond 1/64" thick lead sheet to a curved, uneven wood surface. I'm hamme ...

    Any difference in appearance by using acrylic glue in polyester
    A message posted at WOODWEB's Adhesives Forum (8/23) -- is there any difference in look by using acrylic glue in polyester made solid surface ?? What ...

    Re: Brass Adhesive
    A message posted at WOODWEB's Adhesives Forum (8/23) -- Have you ever tried Liquid Nails? It seems to work on everything. Maybe you could call the ma ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/23) -- Mark B, Have you considered "scuffing up" the shiny surface? It might help to give ...

    Re: Wilsonart - Formica Adhesive switch
    A message posted at WOODWEB's Adhesives Forum (7/23) -- Just went off way to fast no open time. ...

    Re: contact cement to glue to aluminum
    A message posted at WOODWEB's Adhesives Forum (6/23) -- My knowledge of contact adhesive is limited - I generally hot press veneer. Using spray bombs ...

    Re: contact cement to glue to aluminum
    A message posted at WOODWEB's Adhesives Forum (6/23) -- I have used solvent based spray contact for aluminum onto birch plywood. I would be looking f ...

    Re: contact cement to glue to aluminum
    A message posted at WOODWEB's Adhesives Forum (6/23) -- Would 3M 90 spray adhesive work in this application, or are there other products to look into ...

    Re: Ayen Dupo TE 2-8 Glue and Dowel Inserter
    A message posted at WOODWEB's Adhesives Forum (6/23) -- This machine does not cover the entire dowel with glue. The glue used is a very low viscosity ...

    Re: Recommendations for High-Performance Woodworking Adhesives
    A message posted at WOODWEB's Adhesives Forum (5/23/25) -- Contact CP Adhesives online or by phone. Smart people with the products you need. ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/23/25) -- Will a vacuum bag worK? ...

    Re: High Heat
    A message posted at WOODWEB's Adhesives Forum (5/23) -- If it is below the oven it won't see much heat. I assume the oven is in and pocket screws are ...

    Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/23) -- I'm curious how long you guys leave your parts "clamped" in the vac bag? I know the ...

    Re: Stainless Steel to Partical board
    A message posted at WOODWEB's Adhesives Forum (4/23) -- I have glued on more stainless trim then I'd ever care to admit in retail settings. I've trie ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (3/23/24) -- The ASTM specifications for type 2 water resistance is for a specified period of time to w ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (3/23/24) -- This table is about 8 yo. It sat in my kitchen for 6 of those years tight and right. Put i ...

    Re: Lacquer thinner on plywood
    A message posted at WOODWEB's Adhesives Forum (3/23) -- It shouldn't. I'd start with denatured alcohol first and see if that works. You don't want to ...

    Lacquer thinner on plywood
    A message posted at WOODWEB's Adhesives Forum (3/23) -- I am trying to remove some adhesive from good 1 side plywood, I was wondering if using lacque ...

    Re: masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Veneer tape with punched holes works great. You can see the splice lines. The tape is thin an ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- I am 99.9% certain that the issue was your dry shop and the wood being a bit wetter than the ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Titebond II is an appropriate adhesive in my opinion. My experience with oak is that joints r ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Titebond II is an appropriate adhesive in my opinion. My experience with oak is that joints r ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- There is indeed a lot of stress when a round dries. However, TB II gets much of its strength ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- The issue is that the two piece were not close enough to each other when glued. For example, ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Hmmm. My only other question is how long between glue up and turning? The reason I ask is the ...

    glue
    A message posted at WOODWEB's Adhesives Forum (3/23) -- We are preparing to make the switch to using a case clamp. We unfortunately are still using b ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Tom i don't think that is the issue. i have a pizzi type glue applicator. Everything gets a g ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Why titebond 2? Wrong glue. titebond original would be much better. I like sawn surface bette ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- So Doc What you're describing is pretty much my practice. Everything I machine for gluing is ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- Tom I typically wait over night before machining. ...

    Re: casein glue
    A message posted at WOODWEB's Adhesives Forum (2/23) -- I would not recommend it without using an electric blanket on the bag. Also, use the blanket ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/23) -- Read that info, long read! No conclusion other than everything has risks. ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/23/25) -- What edgebander / glue application method. I see almost invisible glue lines with PO glue. ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/23/25) -- Stefani KD and glue is servo controlled. Any less glue and the tape is falling off ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (1/23/22) -- TITEBOND III seen it first hand it gets soft in the heat. In the second picture, those are ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/23) -- Kieth- Quite interesting. I see the function of cutting cross grain strips for the portions w ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (1/23) -- I really want to learn the names of other shops with 1730/1731 issues. We have almost $3 mill ...

    Re: Adhesive - pH
    A message posted at WOODWEB's Adhesives Forum (12/22) -- Almost all woods are acidic! A pH of 4.0 (Original Titebond) is not "very low" nor ...

    Re: How much is enough glue on Tongue & Groove joinery?
    A message posted at WOODWEB's Adhesives Forum (12/22) -- One stained doors you can reduce the stain dark hairline by coating the edges with glue to s ...

    Re: HOLZ HER EDGE BANDER
    A message posted at WOODWEB's Adhesives Forum (12/22) -- You might want to check the actual temperature with an infrared sensor. You can get good one ...

    Re: flammable contact cement
    A message posted at WOODWEB's Adhesives Forum (12/22) -- The cost of one failure is high, stick with what works. ...

    Re: contact adhesive for thick veneer
    A message posted at WOODWEB's Adhesives Forum (12/22) -- I 2nd everything DS said. ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/22) -- Have you tried wood flour for the thickener?It doesn't seem to shrink when I use it. I use 1 ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/22) -- On the previous thread in this forum I asked about gluing dense, oily exotics with Titebond ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/22) -- I've looked into gluing plyboo before and the distributor said it's compatible with all diff ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/22) -- I would make it in wood. You may have noticed that bamboo has faded from the market. It was ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/22) -- I would do two things: Go to the distributor from whom you buy the plywood and get the recom ...

    Exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/22/23) -- I have to glue up turning blanks (balusters painted) that will be exposed to weather. Tit ...

    Re: red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/22) -- RE: Water borne We've been using water borne contact for many years. There is a learning cur ...

    Re: WHERE TO BUY CONTACT CEMENT?
    A message posted at WOODWEB's Adhesives Forum (10/22) -- http://kelleyscabinetsupply.net/ Dap/Weldwood spray grade contact cement. Located in Lakelan ...

    Free Webinar by the Wood Doctor
    A message posted at WOODWEB's Adhesives Forum (9/22) -- Join NHLA and the "Wood Doctor" Gene Wengert for a 3-Part Webinar Series on Finishe ...

    Re: Free Webinar by the Wood Doctor
    A message posted at WOODWEB's Adhesives Forum (9/22) -- I should have added, contact the NHLA.com, then education, then Webinars to register. ...

    Re: Bamboo Plywood
    A message posted at WOODWEB's Adhesives Forum (9/22) -- Vertical grain would be the best bet. ...

    Re: Cleaning out glueing equipment
    A message posted at WOODWEB's Adhesives Forum (9/22) -- My son the chem major says "pretty much everything can be dissolved in acetone". I ...

    Re: Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/22/22) -- When you say glue containers Im not sure what you mean. You could always get a bung of lid ...

    Re: Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/22/22) -- Wow, odd for us. I literally never have a need to stir glue. When I fill the pizzi's I alw ...

    Re: Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/22/22) -- My 5 gal of Titebond 2025 separates within 2 weeks even in my Pizzi unit. Stirring the sol ...

    Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/22/22) -- I am wondering if anyone knows of any device that slowly rotates glue containers so the so ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (8/22) -- As Bruce says its over kill I did 180 sheets of Marine Grade formica on half inch baltic birt ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/22) -- Is this a one time project or an ongoing product. If it is ongoing I would use IR heaters. No ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/22) -- It is a one time project with approximately 140 of these panels. ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (8/22) -- The Doc is right on to highlight the plastic resin glue. It has one advantage over the PVA gl ...

    Wilsonart - Formica Adhesive switch
    A message posted at WOODWEB's Adhesives Forum (7/22) -- We are looking to change over from the Wilsonart 951 spray adhesive to the Formica F268. Has ...

    contact cement to glue to aluminum
    A message posted at WOODWEB's Adhesives Forum (6/22) -- I'm stepping back from the cabinet shop a couple hours a day for a bit to restore my personal ...

    Ayen Dupo TE 2-8 Glue and Dowel Inserter
    A message posted at WOODWEB's Adhesives Forum (6/22) -- Not sure if something like this would work for me. I can't seem to find much info. Here are m ...

    Re: Bubbles
    A message posted at WOODWEB's Adhesives Forum (5/22/26) -- The vacuum degassing step is what most small shops skip and then wonder why they get bubbl ...

    Stainless Steel to Partical board
    A message posted at WOODWEB's Adhesives Forum (4/22) -- A while back we did a retail fixture job that had a 1/4" x 1/4" stainless steel tri ...

    Re: Moisture Content Variations Between Boards
    A message posted at WOODWEB's Adhesives Forum (3/22) -- Never had an issue that I'm aware of in 20 years. Its common for us to receive a delivery of ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/22) -- We were using only TB1 or epoxy when I started in 1993. Every time some new glue was introduc ...

    Re: Moisture Content Variations Between Boards
    A message posted at WOODWEB's Adhesives Forum (3/22) -- Hi Joshua, If your wood is around 8-10% I think you'll be fine. You should definitely allow i ...

    Moisture Content Variations Between Boards
    A message posted at WOODWEB's Adhesives Forum (3/22) -- Hello, Is there a good rule of thumb when it comes to selecting wood for glue up in a panel. ...

    Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/22) -- These are 3 1/2" red oak newels that were made in my south Louisiana shop (cold and fair ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (2/22/22) -- The loctite option is in caulking tubes and takes a ton for decent coverage and slow to dr ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (2/22) -- I like the Titebond version a little better and the new Titebond aerosol activator cans are s ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Okay so I've since been going with the glue and pressing it down with a putty knife to ram it ...

    Re: glue squeeze out
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Have you tried putting Blue painter tape around the joints. That way when the glue comes out ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (2/22) -- I agree with every word that David has said. Here's the deal as I see it... Because it's so h ...

    Re: Glueing Mirror to Teak
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Long time ago I tried something like that, but not on Teak. Clear silicone held for about 8 y ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Read a pc. about how most food cans are coated inside with an epoxy. It was found that some u ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Try this site for info. ...

    Re: Glueing Mirror to Teak
    A message posted at WOODWEB's Adhesives Forum (2/22) -- Don't ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/22) -- I have been using the little Safety Speed edge bander with a glue pot since I started out. I ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/22) -- Yeah, I hear you. Next time i'm out I'll get a fresh bottle and glue a test piece. Same venee ...

    Re: Fire retardants.
    A message posted at WOODWEB's Adhesives Forum (1/22) -- Most Fire retardant boards contain chemicals that instantly dry most PVA's. Sounds like you m ...

    Re: warped panels out of vac bag
    A message posted at WOODWEB's Adhesives Forum (1/22) -- have you ever used Unibond? It's a catalyst glue. ...

    Removing adhesive stain from wood door
    A message posted at WOODWEB's Adhesives Forum (1/22) -- Hi, I'm looking for some expert advice. I am building a house and we have a mahogany front do ...

    Re: High MC and Pva
    A message posted at WOODWEB's Adhesives Forum (1/22) -- The short answer is yes. The glue sets when the water is absorbed into the wood. With that mu ...

    High MC and Pva
    A message posted at WOODWEB's Adhesives Forum (1/22) -- I am edge gluing 5" thick Douglas fir with titebond 1. Some of the material is in the 15 ...

    Re: Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (12/21) -- Great! Thanks for the tips, fellas! ...

    wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (12/21) -- Hello, I glued several 1/8 thick panels aluminum 40x30 to a 1'' large wood structure frame. ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/21) -- Thanks for the responses, I am interested in the PUR adhesive concept. How much time do you ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/21) -- Jeff, I would love to learn more about this. Any info you have including glue delivery syste ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/21) -- Brian, A PUR Hotmelt glue would allow you to do this in as fast as 30 seconds or so. Please ...

    Stirring Glue
    A message posted at WOODWEB's Adhesives Forum (12/21) -- I assume it would be helpful to stir a new 5gal. container of Titebond glue with a paint pad ...

    Glue for plastic
    A message posted at WOODWEB's Adhesives Forum (11/21) -- So anyways I had a bit of a mishap, a board leaning against a wall fell over and hit the wan ...

    Re: Glue for plastic
    A message posted at WOODWEB's Adhesives Forum (11/21) -- If it is a rigid plastic and the break is a tight fit together you could try Cyanoacrylate g ...

    Re: Contour bander glue options
    A message posted at WOODWEB's Adhesives Forum (11/21) -- Jimmy, How do you like the Virutex? I mostly edge band cabinet shelves, and have been using ...

    Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (11/21) -- Hi there, I am having trouble finding a better way to fill voids, cracks, knots quicker and ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/21) -- Bamboo is grass, it is not wood, so the glue properties are not the same. If it were wood, i ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/21) -- thanks for comments and questions- the bamboo is 3/4 inch thickness and 3 ply. The height of ...

    best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/21) -- I am looking for advise on best adhesive. I designed a product that requires glueing two lay ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/21) -- Looks like your glueup may be the problem but no idea of scale. ...

    Corian bulk kits
    A message posted at WOODWEB's Adhesives Forum (10/21) -- Anyone having problems with air bubbles in the hardener tube causing stretches of uncured gl ...

    Re: red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/21) -- Thanks larry, i have been tempted to try waterborne, i know our lungs will thank us for it b ...

    Re: red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/21) -- We use Henkel water borne in "natural." Most laminate suppliers also stock adhesiv ...

    Re: WHERE TO BUY CONTACT CEMENT?
    A message posted at WOODWEB's Adhesives Forum (10/21) -- thanks! i tried them, looks like they sell their own line of contact cement, wonder how it c ...

    Edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (9/21) -- We have a Biesse Akron 420 edgebander. We are currently using Jowalt glue and are having issu ...

    Re: Edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (9/21) -- Hi Lindsey You should check with Jowat to see what their temperature recommendation is for th ...

    Re: fasten gate hinge to trex cladding
    A message posted at WOODWEB's Adhesives Forum (9/21) -- The vast vast majority of fibre reinforced products like hinges, tools, sailboat blocks, etc. ...

    Re: fasten gate hinge to trex cladding
    A message posted at WOODWEB's Adhesives Forum (9/21) -- thanks adam, i'll check it out! ...

    Re: Raw wood to prefin maple ply
    A message posted at WOODWEB's Adhesives Forum (9/21) -- I am not sure what the point of the strip is, and why you couldn't just screw it in. It is ve ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/21) -- Yep, contact cement isn't the right answer for that application. Heat is your friend if you w ...

    Solid surface couter edge
    A message posted at WOODWEB's Adhesives Forum (8/21) -- We have a project that calls for a solid surface (Staron) edge on PL counter tops. All the re ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/21) -- Have you considered spray contact cement, as in a canister & gun setup? I'm not a huge fa ...

    Re: Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/21) -- Thanks Jared. I'm not sure contact will work as these are dimensional tiles glued between cur ...

    Re: Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (8/21) -- I would not rely on glue alone for this, pre finished or not. First choice would be pocket sc ...

    Re: exterior wood bond to metal plate
    A message posted at WOODWEB's Adhesives Forum (7/21) -- It is good to stick metals completely because it creats very stick bond between to metal piec ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/21) -- That thing is going to cost a few bucks. I would be inclined to have an architect spec it to ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/21) -- Thanks Adam, appreciate the advice, especially about the liability! I'll probably go with the ...

    How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/21/25) -- I am looking for a way to clamp material to 4x8 sheets of plywood. The problem is trying t ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/21/25) -- Ken We will be gluing 3"x48" pieces to the plywood. Maple to maple plywood. ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/21/25) -- Are you talking about gluing 4x8s to 4x8s or dimensional stock to the 4x8? ...

    Re: Plastic resin adhesive ideal temp
    A message posted at WOODWEB's Adhesives Forum (5/21/23) -- I have pressed PPR at 100°C with a cycle time of 5 minutes. The temperature did not compro ...

    Plastic resin adhesive ideal temp
    A message posted at WOODWEB's Adhesives Forum (5/21/23) -- We are using cp-0503 adhesive for some solid wood projects. We want to put them in a hot b ...

    Veneering over solid surface
    A message posted at WOODWEB's Adhesives Forum (5/21) -- Asking if anyone has tested or tried veneering over solid surface: Designer has in mind a dis ...

    Re: Veneering over solid surface
    A message posted at WOODWEB's Adhesives Forum (5/21) -- As long as you can find an adhesive that is compatible with both the veneer and the solid sur ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (5/21) -- I also use a frame press like Larry mentioned, I just use the manufacturer recommended clamp ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/21) -- 1) beech 2) soft maple 3) doug fir Just guessing, never been to Oregon. ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/21/22) -- "heaven benches"? I guess they have to be perfect? ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (3/21) -- Just a small point about "green". When referring to epoxy, "green" means ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/21) -- You need to consult a licensed structural engineer. It would be inappropriate to give you an ...

    Re: epoxy glue and spalded Maple
    A message posted at WOODWEB's Adhesives Forum (3/21) -- Not so sure I'd use "spalded" maple for chair legs! ...

    Edge Gluing Hard Maple
    A message posted at WOODWEB's Adhesives Forum (2/21) -- Hello, We've just recently noticed an issue with poor joint performance on hard maple. We've ...

    Combi Core Plywood
    A message posted at WOODWEB's Adhesives Forum (2/21) -- I have a situation where I need to veneer 1" thick panels for some case work. I know tha ...

    Re: FASTER Spray Glue techniques
    A message posted at WOODWEB's Adhesives Forum (2/21) -- The only spray adhesive I've ever used were the pressurized canisters of solvent based like W ...

    Re: Combi Core Plywood
    A message posted at WOODWEB's Adhesives Forum (2/21) -- 1" MDO. ...

    casein glue
    A message posted at WOODWEB's Adhesives Forum (2/21) -- Can I use this glue when the temp is below 50 degrees? 40? I'm using a vacuum press ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (2/21) -- In my experience, I can say a few things: Ipe is not a good interior wood. It is a very good ...

    Glueing Mirror to Teak
    A message posted at WOODWEB's Adhesives Forum (2/21) -- I'm Building these inset MED/Cabinets that have a Mirror attached to the front of a Teak Door ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/21) -- I have never used either of those brands, I have owned Minimax, SCM , Holzher and Brandt edge ...

    Re: adhesive from 1978
    A message posted at WOODWEB's Adhesives Forum (1/21) -- What's the conversion from pounds to board/ft? Miters, butt joints or stile/rail joints could ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/21) -- Greg, If you like the color Ipe, then at least cut the ends out of cross grain, so it matches ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/21) -- At the risk of being more paternalistic I will point out that there is a marked difference be ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/21) -- “Anything can be done if done right”. I don't need to point out the fallacy in such a proclam ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/21) -- I would like to provide a suggestion for you, but i think it best I don't. ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/20) -- Thank you all for your responses so far! After you tape your veneers, do you glue them toget ...

    Re: Gluing steel to aluminum
    A message posted at WOODWEB's Adhesives Forum (12/20) -- 3m 5200 is an excellent choice for bonding dissimilar materials. They are both metals; howev ...

    contour edgebanding
    A message posted at WOODWEB's Adhesives Forum (12/20) -- I use a contour bander regularly and have been seeing problems where the low temp glue(pelle ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/20) -- Glue dry time has nothing to do with the rate of case clamping! Best case clamping, greatly ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (12/20) -- We have had good results by wiping the two edges that are being glued togather with denature ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (11/20/23) -- I agree with Ken ...

    adhesives
    A message posted at WOODWEB's Adhesives Forum (11/20) -- I'm in need of a clear adhesive to bond acrylic to lacquer finished wood ...

    Re: oak or ash veneer on 1" steel rod or tubing
    A message posted at WOODWEB's Adhesives Forum (10/20) -- Treat the steel posts with a phosphate treatment first. This will give a surface finish that ...

    Re: WHERE TO BUY CONTACT CEMENT?
    A message posted at WOODWEB's Adhesives Forum (10/20) -- Try Hardware Imagination several locations in Fl check their website ...

    Re: Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (9/20) -- Glue size would help ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (9/20) -- You know, there isn't a person on this thread who hasn't seen the "rules" broken wi ...

    Fast drying glue on masonite/hardboard
    A message posted at WOODWEB's Adhesives Forum (8/20) -- We are doing a project with a bunch of dimensional tiles that we are making from laminating t ...

    Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (8/20) -- Hello, I'm making a window seat/chest for a client and I'd like to install the chest and glue ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/20) -- Daryll Keli at Vacuum Pressing is where I get most veneer supplies. He also offers two instru ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/20) -- The unit is closed at all times until in use. You press the lever with your thumb which opens ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/20) -- Thank you Chris, It appears the Pfohl and Klebo are the same unit. It would be great if one o ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/20) -- Pfohl makes a great one. Used to have one and loved it. Lasted for years and years but way ov ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/20) -- Thank you, I'll give it a go. ...

    Re: Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (6/20/26) -- I’m exploring better ways for woodworking businesses to manage customer updates and outrea ...

    Re: Hotmelt PUR and Miterfolding
    A message posted at WOODWEB's Adhesives Forum (6/20) -- Youre lucky, I just did this last month...Strength will not be a problem. We did some dry run ...

    Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/20) -- So a customer would like a curved roof structure next to their pool here in San Diego, and I ...

    Re: Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (5/20/26) -- D's point about reputation doing the heavy lifting after 30 years is spot on — nobody care ...

    Recommendations for High-Performance Woodworking Adhesives
    A message posted at WOODWEB's Adhesives Forum (5/20/25) -- We’re evaluating adhesives for industrial woodworking applications, and I’m looking for pr ...

    Re: entry level glue system
    A message posted at WOODWEB's Adhesives Forum (3/20) -- I have a two man shop. We build our own doors and for others. Rf is definitely the way to go ...

    Re: Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (3/20) -- We use a water base industrial contact cement system from the manufacture on this link its ca ...

    interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (2/20) -- We are being asked to provide ipe for the use of interior staircase. We will need to be using ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (1/20/26) -- Laminating sheet steel to Baltic birch is interesting because you’re bonding two dissimila ...

    Re: Glue for PVC Edgeband manual application, 90-degree corner piecut cabin
    A message posted at WOODWEB's Adhesives Forum (1/20/25) -- I cut these shelves an the cnc and intentionally leave the radius in the corner. we have a ...

    What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/20) -- Hi I am an small cabinetshop baser om northern europe and Are koking to buy my first bander. ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/20) -- Many years ago, I had a builder that wanted us to do a deck railing with something other than ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/20) -- Paul- Thanks for the proffessional advice. Its amusing to see paternalistic responses saying ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/20) -- "Amusing, Paternalistic?" You are the one with the problem. Everyone here is trying ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (1/20) -- Can anyone say "Class Action Suite", and would you be willing to join? There is a l ...

    warped panels out of vac bag
    A message posted at WOODWEB's Adhesives Forum (1/20) -- Good Morning, We are laying up 4x8 panels on PB with a VG laminate on one side and a white ve ...

    Re: Beginners edgebanding questions
    A message posted at WOODWEB's Adhesives Forum (12/19) -- Not sure your low temp. We are only about 10 degrees higher. I would think the Dorus 217 is ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/19) -- Brian, Are you familiar with PUR adhesives? The go on like hot-melt, but give structural str ...

    How much is enough glue on Tongue & Groove joinery?
    A message posted at WOODWEB's Adhesives Forum (12/19) -- I am really curious what the experts in the industry have to say on hairline cracks on paint ...

    Re: How much is enough glue on Tongue & Groove joinery?
    A message posted at WOODWEB's Adhesives Forum (12/19) -- I assume you are talking about the rail and stile joint? Slab door? In the panel? If it is a ...

    Re: Mounting Mirror with light
    A message posted at WOODWEB's Adhesives Forum (11/19) -- Best to mount the mirror to the wall then trim around it. Layer an even coat of adhesive aro ...

    Re: adhesive for wall sheathing on houseboat?
    A message posted at WOODWEB's Adhesives Forum (11/19) -- James, I think I would use some sort of flexible marine type adhesive which you can get in a ...

    Re: Adhesive to make PSA sand discs
    A message posted at WOODWEB's Adhesives Forum (10/19/22) -- In my opinion your only real option is to buy a wide roll of double stick from perhaps so ...

    Re: Adhesive to make PSA sand discs
    A message posted at WOODWEB's Adhesives Forum (10/19/22) -- Maybe try this ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/19) -- Chip - I recently learned in conversation with a TB tech that TBIII does not do well in heat ...

    red contact cement or other?
    A message posted at WOODWEB's Adhesives Forum (10/19) -- I started using wilsonart 800 contact cement recently and though it works very well, it come ...

    Where To Buy Contact Cement?
    A message posted at WOODWEB's Adhesives Forum (10/19) -- any of you guys know where to buy contact cement from in florida or any state nearby? I need ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (9/19) -- I'm kind of surprised by the posts questioning whether this post is sincere. Got some nice re ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (9/19) -- We just use Titebond original. I don't know why people are saying they cut them on a table sa ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (9/19) -- Oh, and thanks Russ, a haunched mitre is what we are actually using,I couldn't think of the t ...

    fasten gate hinge to trex cladding
    A message posted at WOODWEB's Adhesives Forum (9/19) -- hi there, i am thinking about using a glue between my gate hinges and a trex cladding on a po ...

    Re: fasten gate hinge to trex cladding
    A message posted at WOODWEB's Adhesives Forum (9/19) -- I think I would be looking at using something like PL Premium construction adhesive or simila ...

    Re: fasten gate hinge to trex cladding
    A message posted at WOODWEB's Adhesives Forum (9/19) -- thanks spicolli, i checked out your link and it says not recommended for plastics. my hinges ...

    Raw wood to prefin maple ply
    A message posted at WOODWEB's Adhesives Forum (9/19) -- Does melamine glue work? I am building a vaNity that hangs on a wall with vessel sink. Cab is ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/19) -- Concur with the above, will add to leave it pressed longer than you normally would with the o ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Unibond a UF type adhesive that has two colours of catalyst powder available. Have a look at ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Yes, my terminology might be wrong. You are using a backed veneer so you will already be bene ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Veneer is not wallpaper. Despite the DIY guys that will gladly tell you contact cement, spray ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Tom, Thank you for the advice. I think I am going to do a practice gule up with unibond and s ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/19) -- David, where do you suggest I buy a vacuum bag and how much do you think I'll be spending? An ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/19) -- I recommend applying a crossband veneer to the face before vacuum bagging the curve. It keeps ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Get a Universal Tint for the plastic resin glue to darken it. The rigid glue line will not sw ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/19) -- The folks at Spectrum Adhesives were super helpful. They published this document which was a ...

    Re: adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/19) -- Tom, when you say "cross band veneer" do you just mean a "sub" veneer wit ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/19) -- I believe you will have problems with both of the options you are asking about. I have used s ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (5/19) -- I too have had my failures with Ipe. I try my best to stay away from the stuff and especially ...

    Re: Glueing Mirror to Teak
    A message posted at WOODWEB's Adhesives Forum (5/19) -- when ever I have to mount mirrors to a door I use a silicon type adhesive called super 7 - in ...

    Re: interior use of ipe for gluing
    A message posted at WOODWEB's Adhesives Forum (5/19) -- ooops....I meant advice ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (4/19) -- Neither success nor failure is ever guaranteed in wood. The odds just shift. 40+ years ago I ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (4/19) -- door up for 3 months now. through cold and 30% rh and now hot with 95% rh. samples have survi ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (3/19/24) -- I'm not doubting what you are saying but ,on the other hand, thousands of gallons of Titeb ...

    Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (3/19/24) -- I posted years ago about how tb2 isn't moisture resistant as claimed. It wasn't BTW. Now I ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (3/19) -- We've always used white glue on end grain as its often more forgiving when it comes to moveme ...

    Re: epoxy glue and spalded Maple
    A message posted at WOODWEB's Adhesives Forum (3/19) -- Change glues. Why are you committed to epoxy? There are all sorts of strategies to keeping gl ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/19) -- It has been a while for me, but heat and pressure are what I remember about using Resorcinol. ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/19) -- Thank you, Jeff. It's good to know about the temperature. David, the 5/8" thick panels a ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/19) -- Epoxy??????? We have 3 glues on the shelf. Titebond 1, marine type epoxy, and good super glue ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/19) -- Hi David, With some formulas / brands or Resorcinol the temp was critical. It still is, but w ...

    FASTER Spray Glue techniques
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I would like to research ideas on how to apply contact adhesive faster when laminating. It se ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/19) -- The problem is adhesion. Inside of the crack it is almost impossible to get down to clean woo ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I agree with John & David 100%. You may want to consult Gene Wengert on this if you think ...

    Re: entry level glue system
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I don't know how radio frequency glueing works. Could you give me a good source for informati ...

    Re: entry level glue system
    A message posted at WOODWEB's Adhesives Forum (2/19) -- What are you gluing? Can't beat radio frequency for speed. Cheaper solution: glue clamp rack ...

    Re: Fastcap Wood banding on MDF? Should I?
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I have used it on a partical board computer stand that I use with my CNC router, to see how i ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I have turned down Ipe doors before since, in my experience, I have never seen Ipe stay glued ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/19) -- @David, I will keep you posted. I have a few ideas that we are going to try. When finished I ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/19) -- @ Adam Thanks for the reply. Yes I know the door will be heavy. Just can't afford any weak gl ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/19) -- Hi, In response to the "green" aspect. "Green" as has been pointed out, d ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Resorcinol glue is what we used with teak to build replacement Chris Craft louver galley door ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Thanks for the help everyone, I love this site, it is such a wealth of knowledge. I have buil ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Tyler, Thanks for the response. I am comfortable with how to make the drawer front; I am inte ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Ty, Was the substrate finished? Do you mind sharing the brand of contact cement you used? ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Ah, sorry! In the past we have used contact adhesives with good luck. ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Your inlay will not expand or contract with the substrate. The table may expand or contract b ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/19) -- I agree with Tom. Especially this time of year. Especially this year. I will add that Ipe nev ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (1/19) -- We are having the same problem with delaminating. When we were thinking of switching to the p ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Joel - Don't get mad, get smart! I agree that it could have been a bad batch of the glue, or ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (12/18) -- This looks like the famous Wilsonart 1730/1731 bad batch adhesive. We've been dealing with t ...

    Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/18) -- Good afternoon woodworkers! I am looking for the fastest drying glue on the market, for dowe ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/18) -- What about an RF drier? ...

    Mounting Mirror with light
    A message posted at WOODWEB's Adhesives Forum (11/18) -- I have to mount a mirror in a wood frame with a round hole cut in mirror for a light fixture ...

    Re: pressing laminate
    A message posted at WOODWEB's Adhesives Forum (11/18) -- other than a cost issue I'd simply contact two pieces of 3/4" material together to make ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (10/18) -- You have answered your own question. You just don't like the answers. ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/18) -- The shop I work in has also had some problems with #3. We had some door panels that failed o ...

    pressure pot glue gun issues- Resolved
    A message posted at WOODWEB's Adhesives Forum (10/18) -- Had a major problem with our glue pot and gun rig. So bad that I was buying a gun once a yea ...

    Re: pressure pot glue gun issues- Resolved
    A message posted at WOODWEB's Adhesives Forum (10/18) -- Nice to know. Thanks for the info! John ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (9/18/25) -- I’ve worked with veneer applications on UV-coated plywood before, and a few parameters can ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (9/18) -- I don't think it really matters whether or not he's actually got an idea in the works or he's ...

    Cleaning out glueing equipment
    A message posted at WOODWEB's Adhesives Forum (9/18) -- What solvent would be best to clean out hardened pva glue from equipment, I believe it to be ...

    Re: Cleaning out glueing equipment
    A message posted at WOODWEB's Adhesives Forum (9/18) -- yes, I am soaking in water now but some is r deep and really cured up. Just thought there may ...

    Re: Cleaning out glueing equipment
    A message posted at WOODWEB's Adhesives Forum (9/18) -- Soaking it in Lacquer thinner will soften it eventually. Make sure there are no seals that mi ...

    Re: Cleaning out glueing equipment
    A message posted at WOODWEB's Adhesives Forum (9/18) -- If it's Titebond Original then water will soften it over time. Warm water will speed the proc ...

    Re: Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (8/18/22) -- Thanks y’all. I went with Tightbond 3 and moderate clamping pressure with a wood block on ...

    Re: Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (8/18/22) -- Yellow PVA will work fine. ...

    casement window weatherstip
    A message posted at WOODWEB's Adhesives Forum (8/18) -- I'm about to begin a refurbish of seven Andersen wood casement windows. It is the weatherstri ...

    Re: Are you going to IWF?
    A message posted at WOODWEB's Adhesives Forum (8/18) -- I will be giving seminars at the IWF show on Thursday (Rough Mill Improvement; All About Wood ...

    Are you going to IWF?
    A message posted at WOODWEB's Adhesives Forum (8/18) -- Jeff and I are giving a seminar on gluing on Friday, 9AM. Register in advance. Hope to see yo ...

    Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (7/18) -- I am looking for guidance as I don't want to lose my shirt on this job, which is a bit intemi ...

    adhering veneer to timber flex
    A message posted at WOODWEB's Adhesives Forum (7/18) -- Hi all, I'm making a curved bar front and trying to figure out the best way to do it. I was g ...

    glueing laminate
    A message posted at WOODWEB's Adhesives Forum (7/18) -- We are glueing laminate to existing vertical laminate surface with a triangle cutout in 1/4 o ...

    Re: glueing laminate
    A message posted at WOODWEB's Adhesives Forum (7/18) -- Scott, Our CP-0114 (available on our web site) should work well for you. Unlike a contact cem ...

    Re: glueing laminate
    A message posted at WOODWEB's Adhesives Forum (7/18) -- We don’t have a distributor on the West coast but we can ship to you, no problem. A gallon wi ...

    Re: glueing laminate
    A message posted at WOODWEB's Adhesives Forum (7/18) -- Jeff do u sell on the west coast and how many square ft. coverage in a gallon? Thanks ...

    Re: exterior wood bond to metal plate
    A message posted at WOODWEB's Adhesives Forum (7/18) -- 3M 5200 is the best product I can think of. The metal expands and contracts due to temperatur ...

    Re: Adhesive Testing
    A message posted at WOODWEB's Adhesives Forum (6/18/26) -- Those are good practical methods. In addition to checking for wood failure, I've found it ...

    Re: Polyurethane Cleanup
    A message posted at WOODWEB's Adhesives Forum (6/18/26) -- For 50 years, my glue removal tool has beed a Red Devil Paint scraper. Sharpen it with a f ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/18/22) -- 1/8" is not veneer, its wood just thin, then when you add the thin MDF its not good, ...

    Re: Hotmelt PUR and Miterfolding
    A message posted at WOODWEB's Adhesives Forum (6/18) -- I think it is worth a try. However, remember that the hot multi PUR cures partially by coolin ...

    Re: Best Wood Glue In Caulk Tube?
    A message posted at WOODWEB's Adhesives Forum (6/18) -- The Sikaflex 1a is not wood glue. The strongest and longest open time would be mixing your ow ...

    Re: Best Wood Glue In Caulk Tube?
    A message posted at WOODWEB's Adhesives Forum (6/18) -- Sorry that's an Aussie site. Jamestown Dist. in RI should have them as well ...

    Re: Glueing exterior cedar shutters
    A message posted at WOODWEB's Adhesives Forum (6/18) -- TB III Good quality PUR Epoxy ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/18) -- Chas Lock miters can be tough especially in longer lengths, machining of both joints is criti ...

    Re: Adhesives
    A message posted at WOODWEB's Adhesives Forum (5/18) -- I know its difficult to stick stuff together, but i think, adhesives would do good. I had als ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/18) -- I will add my vote to the myth. If we have a piece of wood that is at a uniform MC and is fla ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (4/18) -- A pretty good way to separate App. oak from So. oak is to look at the rings spacing. If 1/4&q ...

    Re: Bubbles
    A message posted at WOODWEB's Adhesives Forum (3/18/24) -- Hi, You should mix the adhesive components for a minimum of 3 minutes at a speed of 1000 R ...

    Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (3/18/22) -- I do a lot of work on architectural grade wood doors, they are made of a particle core wit ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/18) -- Yep, what David said. Took me a long time to figure that out, Tb1 or plastic is the way to go ...

    Re: Type of Glue for HPL
    A message posted at WOODWEB's Adhesives Forum (3/18) -- Hi, there are a number of options available to you. It will depend on the kind of bond you ex ...

    Type of Glue for HPL
    A message posted at WOODWEB's Adhesives Forum (3/18) -- We just have bought the Glue spredar machine and Hot Presse line. Please could any boday will ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/18) -- One of the points I'm heading towards, is that laminating that many boards will lead you to l ...

    Re: laminate glue
    A message posted at WOODWEB's Adhesives Forum (3/18) -- Yes ...

    Re: Stainless Steel to Partical board
    A message posted at WOODWEB's Adhesives Forum (3/18) -- We use Manus Flexweld epoxy. It is inexpensive but requires double barrel caulking gun. It mi ...

    epoxy glue and spalded Maple
    A message posted at WOODWEB's Adhesives Forum (3/18) -- Does anyone have any suggestions to prevent the excess glue from penetrating the wood and cau ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/18) -- A glue joint is typically under pressure, so if the glue is soft naturally, or from heating, ...

    Re: warped panels out of vac bag
    A message posted at WOODWEB's Adhesives Forum (2/18) -- I agree...this is a moisture issue and the water in the adhesive is likely the source. There ...

    Re: Gluing torrified ash
    A message posted at WOODWEB's Adhesives Forum (2/18) -- There are different qualities of torrified wood, so I suspect the issue is related to the woo ...

    Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/18) -- So you know how often a coat of primer can bring out a defect not quite that detectable by ey ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/18) -- just use wood filler, or what we use, DAP spackle. No need for Bondo unless its a big chunk m ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Good luck with that. You will need a fork lift to hang the thing. Epoxy resin works with ipe ...

    Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- I am making a IPE Entry Door. Does anyone have any suggestions on what glue/adhesive I should ...

    Edge BandingA Painted Edge
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Hi everyone! Have somebody done what im about to do. I have some 18mm painted chipboard panel ...

    Re: EDGE BANDING A PAINTED EDGE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Yes, you need a fresh edge. cm ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/18/25) -- DORUS KS 351 ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/18/23) -- Thank you Tom & Dave, this info was helpful! ...

    Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Ok, I have read a lot, watched a lot and thought a lot. The conclusion is I am not sure? I ne ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Resorcinol is the strongest glue on the planet. If you go to boatbuilders forums you will fin ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Boats are built with epoxy for a reason - it works. Enlist the help of a local marine supply ...

    Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- We make solid wood tables in a variety of woods, Cherry being the most common by far. One of ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- I put a mailbox together made from Sapele that was 3/8" thick. It was put together using ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- I have had one failure, not veneer, using TB3. It turns out it was a bad batch of glue,probab ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Ken, Yes - I came up with about $31-$32 ea if made with solid wood, and $23 out of plywood. B ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/18) -- We warm our edgeband before we apply it. Usually about 110-120 degrees. If you get it too hot ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/17) -- Its a Taylor, I don't think they make it any more according to their website. There is a red ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/17) -- I don't see what the big deal is. These problems could be avoided by simply reading, underst ...

    Re: laminating press Mylar alternatives
    A message posted at WOODWEB's Adhesives Forum (11/17) -- Michael, Unfortunately there isn't an alternative you can use. The Mylar is the thinnest mat ...

    Re: Adhesive for solid phenolic.
    A message posted at WOODWEB's Adhesives Forum (11/17) -- here it is ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (10/17/22) -- I agree with the others, that you're overthinking it. But, if you want the ultimate peace ...

    Adhesive to make PSA sand discs
    A message posted at WOODWEB's Adhesives Forum (10/17/22) -- I just discovered a large stack of sand discs paper backed, is there an adhesive we can u ...

    Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (10/17) -- I need to glue cypress for thickness to use on a porch railing. Would melamine glue work? It ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (10/17) -- Melamine glue is designed for one non porous and one non-porous surface. I don't think it's ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (10/17) -- My understanding is that springback is determined by number and thickness of laminations and ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (10/17) -- talked to both Titebond tech,and Daryl @ vacupress re Unibond 1. Titebond extend has the har ...

    oak or ash veneer on 1" steel rod or tubing
    A message posted at WOODWEB's Adhesives Forum (10/17) -- I have a stair job in the works in which it could be useful to substitute a number of 1" ...

    exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/17) -- getting ready to build sapele entry and door for custom home. have always had good service w ...

    Re: exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/17) -- Doug, You can get it here: http://www.cpadhesives.com/woodworking-adhesives/dyn-185-aerodux- ...

    Re: Bamboo Plywood
    A message posted at WOODWEB's Adhesives Forum (9/17) -- What about Plyboo? ...

    Re: Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (9/17) -- Hi- I saw your message and thought I'd give my experience. I use almost entirely waterbased / ...

    Re: edge tape adhesive - chemically sensitive client
    A message posted at WOODWEB's Adhesives Forum (9/17) -- I think you could easily do hot melt, which I think is PVA based. Not too many harsh chemical ...

    Re: Sprayable water based
    A message posted at WOODWEB's Adhesives Forum (9/17) -- I've used Wilson art H2O contact adhesive with excellent results. You can brush, spray, roll ...

    Bubbles
    A message posted at WOODWEB's Adhesives Forum (8/17/23) -- Hi, How to make Polyviny Acetate based woodwork adhesive bubble free during manufacturing ...

    Re: Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (7/17) -- Yes ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/17/24) -- The only time I think about using polyurethane glue is when I need waterproof joinery. I m ...

    Re: Adhesive Testing
    A message posted at WOODWEB's Adhesives Forum (6/17) -- We take 1 x 4 (3/4” x 3 1/2” maple and glue up a couple of samples of edge and butt joints. L ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/17) -- I hate that stuff. It drys flexible and when you sand it with the RO it gets gummy and clogs ...

    Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (6/17) -- I've got to laminate 24 gauge sheet steel to baltic birch for a pair of Thermador refrigerato ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (5/17) -- I am using powder type (old-fashion) adhesive, mixed with water, and some industrial chemical ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- Plane those walnut, and leave it for weeks to dry, with lots of ventilation. Stack them if yo ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (5/17) -- The "old fashioned" powder glue contains formaldehyde. Most shops should avoid this ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- Wood does not expand a practical amount when it is heated. In fact, what does happen is that ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- I am sure your glued wood will not work after a few weeks if you are not using poly glue. Don ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- You do not need to alternate the strips. The amount of cup is so very small that this orienta ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/17) -- My guess Pacific Madrone ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- Trex is not wood. It is a PVC product with some material, perhaps wood dust, blended in. I ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- Oh, if its trex type stuff, forget it. Mechanically fastened only. As an aside tb3 is shit ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- West system epoxy ...

    Re: Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (3/17/22) -- perley , Which hot melt gun/system are you using? What is your recommendation on glue? ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/17) -- Had big time trouble with white oak table pedestal at the beginning of my career. That's when ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Okay Jeff, what is a reactive polyurethane? I imagine it is the glue that gives you a black h ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Right you are! It will give you the dreaded black hand. CP carries both the PUR (CP-0701) and ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Thank you for the replies. Sapele seems to have a lot of oil in it. When I burn rippings, the ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- No one said anything, but the panels are 5/8" thick, not 58" thick. ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Here’s a blast from the past 😁 ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (2/17) -- I use it for a whole host of things. One of them is gluing sub counters in the shop. I can ea ...

    Re: gluing solid wood together that will be bent
    A message posted at WOODWEB's Adhesives Forum (2/17) -- West Systems Is the best... ...

    Re: Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/17) -- This is what I would do. ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- I guess cursing is fun unless it's directed at you when you're trying to help. So this f*ck i ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- Really Joel, you get 2 responses saying they have not had a problem like you're describing an ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- Cursing is fun! About as much fun as having something you spent hours on ruined in 30 seconds ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- You f#cks can naysay me all you want. It was well pressed and cured for 2 days at 90f. The mi ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- The glue is resistant, not proof. Nevertheless, I suspect a bad bond/not enough cure time. Do ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (1/17) -- Most people can mix the parts together within the 10% accuracy required. The most common fail ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/16/21) -- What I learned about TBIII is that is loses its strength - its grip - as temperatures inc ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/16/21) -- David Sochar has commented that TB III adhesion strength degrades with heat. Another prob ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/16/21) -- Yes, it’s is work. I don’t want any call backs ,so probably staying with epoxy. ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/16) -- We have a $1500 roller glue spreader. It is at least 10 years old. So far that's $150 a year ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/16) -- Bill what brand do youi have? ...

    Re: Glue for PVC Edgeband manual application, 90-degree corner piecut cabin
    A message posted at WOODWEB's Adhesives Forum (11/16/25) -- For situations like yours, many woodworkers and cabinet makers recommend using a PVA or s ...

    Re: Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (11/16) -- I tried the same method recently. Sanded the UV ply with 80grit before spraying 3M aerosol c ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (11/16) -- Looks like they used the same glue we do, WA 950. The photo looks like the adhesive was spra ...

    laminating press Mylar alternatives
    A message posted at WOODWEB's Adhesives Forum (11/16) -- Hi, We have an old italpresse to laminate our melamine (over and under the malamine there's ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (11/16) -- well, I do not know the type of glue. We are called in to repair this work that was done 2 y ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (11/16) -- It looks painful. What kind of glue was used? Application, pressing, processing, etc. Finish ...

    DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (11/16) -- I have a bunch of casework that is de laminating and I need to fix in the field. Look at Pho ...

    Re: Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/16) -- TB 1 is a lot easier to work with than PUR, no bubbling drools. ERC/juniper seems pretty sof ...

    adhesive for wall sheathing on houseboat?
    A message posted at WOODWEB's Adhesives Forum (11/16) -- I'm building out a mini houseboat on a 26ft JC Craft Tritoon. stick frame construction/OSB T ...

    pressing laminate
    A message posted at WOODWEB's Adhesives Forum (11/16) -- We are continuously making 1-1/2" thick post laminated countertops....currently we buil ...

    Adhesive for solid phenolic.
    A message posted at WOODWEB's Adhesives Forum (11/16) -- I need to fabricate some fixtures out of phenolic and have tried various epoxies for plastic ...

    Re: Adhesive for solid phenolic.
    A message posted at WOODWEB's Adhesives Forum (11/16) -- 3M autobody panel adhesive, 2 part epoxy. cant remember the number offhand but its like 8220 ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/16) -- Hi Tom, It won't affect the polystyrene. ...

    Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (10/16) -- I've been using Unibond 800 for years on bent laminations...most are gentle curves, min radi ...

    Re: 55 gallon drums?
    A message posted at WOODWEB's Adhesives Forum (10/16) -- We used pl1000 several years ago but have since switched to another product. I do remember t ...

    Re: 55 gallon drums?
    A message posted at WOODWEB's Adhesives Forum (10/16) -- Rob, Kirk's right. Most adhesive suppliers bill by the pound when it's sold in drums or grea ...

    Bamboo Plywood
    A message posted at WOODWEB's Adhesives Forum (9/16) -- Hi, I’m an architect working with a woodworking shop to make bamboo structural plywood in Kin ...

    Re: Bamboo Plywood
    A message posted at WOODWEB's Adhesives Forum (9/16) -- Hello, The standard for this type of plywood is a phenolic resin. Please feel free to call me ...

    Re: Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (9/16) -- Ditto on pressure on the inside curve. Cut a chunk of styrofoam to use as a a platen inside t ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/16) -- i use a fair amount of unibond, and concur with the comments - mechanically stir, let sit, st ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/16) -- Recently used Unibond 800 to do a door repair where we adhered new 1/4" rift oak skins t ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/16) -- I second Mark's statement. Buy a paint mixer for a drill. I like to mix completely, let sit f ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/16) -- PVC Edgebanding falling off? Whats surprising about that. Can't tell you how many times as a ...

    Re: Contour bander glue options
    A message posted at WOODWEB's Adhesives Forum (7/16) -- I really like Virutex ...

    Hotmelt PUR and Miterfolding
    A message posted at WOODWEB's Adhesives Forum (6/16) -- We are currently miterfolding MDF and particle board panels using a Titebond II type PVA glue ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/16) -- I've glued a lot of WRC with TBond III, I've noticed it's the darker color pieces that the gl ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (5/16) -- I agree, a few pieces look like alder. But then again, that is a lot of log wood, and each pi ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/16) -- Alternating rings is not a myth. It doesnt stop individual pieces from cupping, it just makes ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (5/16) -- Chris, I use epoxy for veneering all the time, but not the West brand. The brand I like is a ...

    Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (5/16) -- I am curious about using epoxy, West Systems, as an adhesive for gluing 1/8" solids to b ...

    Re: Glue choice for TFM - TFM (thermally fused Melamine)
    A message posted at WOODWEB's Adhesives Forum (4/16/26) -- Gluing TFM panels always sounds easier than it actually is, especially once you deal with ...

    Re: Polyurethane Cleanup
    A message posted at WOODWEB's Adhesives Forum (4/16/26) -- Polyurethane squeeze-out always feels harmless until it cures rock solid and suddenly noth ...

    Re: US Standards
    A message posted at WOODWEB's Adhesives Forum (4/16/23) -- Hi Kiran, Not sure if this is what you are after, but I came across the US Adhesives, who ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/16) -- To clarify, I said OSB by mistake. I meant MDO. OSB would be a hideous choice, obviously. I c ...

    question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/16/24) -- Hi, new to this forum. Just was looking for advice on adhesives to use for outdoor furnitu ...

    Re: Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (3/16/22) -- I would imagine hot glue unless you want to wait forever to move on to the next drawer. Ho ...

    Re: Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (3/16/22) -- I have used hot melt for years with no problems ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (3/16) -- Epoxy works great .The only thing you must do with either glue is to wash the wood joint with ...

    Re: Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (2/16/24) -- spray adhesive (3M makes several varieties), you can use wood glue like any of the Titebon ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (2/16/24) -- incorrect surface preparation, not pressing the veneer into the substrate, or using too mu ...

    Re: adhesive for thermally modified hardwood like Cambia
    A message posted at WOODWEB's Adhesives Forum (2/16/24) -- type 2 pva such as Titebond 2 and urethane glue. ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/16/23) -- How about wiping the back of the laminate with Acetone to remove any manufacturing contami ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/16/23) -- @leo G. We tried that and it is hit and miss. We used formica cc spray and works great. ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/16) -- You might end up with the dark line. It should work fine. Probably overkill though. Polyureth ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/16) -- I would suggest using a reactive polyurethane. It will give you higher water resistance than ...

    Re: Cabinet Makers: what removable labels do you use?
    A message posted at WOODWEB's Adhesives Forum (2/16) -- We get ours here. https://www.houselabels.com/removable-labels ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/16) -- Gene our shop is around 68 when in operation and 62 when not. The material stays in the shop ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/16/23) -- Wrong glue. Use cp adhesives urea formaldehyde glue. Or uni bond 800 ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/16/23) -- Plastic powdered resin adhesive ...

    Cane drawer fronts
    A message posted at WOODWEB's Adhesives Forum (1/16) -- We have an upcoming project where customer wants to use cane material as the inset for the dr ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/16) -- TB2 is Cross-Linked PVA and my experience with it is it needs to be fresh, not subject to low ...

    entry level glue system
    A message posted at WOODWEB's Adhesives Forum (1/16) -- I own a shop cabinet shop. I want upgrade glue set times. Any suggestions? Thanks ...

    Re: choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/16) -- TB1 1 is an excellent glue. The only products that benefits from water dampening are moisture ...

    Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (12/15/21) -- I am managing a job on Kauai where we are installing teak siding . The siding is 9/16” x ...

    Re: Beginners edgebanding questions
    A message posted at WOODWEB's Adhesives Forum (12/15) -- Thanks everyone who replied! I seriously appreciate the time taken, as I'm sure you're all b ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (12/15) -- I have laminated polystyrene panels to luan ply with 3M Fastbond 30 NF water-based contact c ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/15) -- An exterior door is really a "tough situation" as one side is exposed to a fairly ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/15) -- Dr Gene - The OP mentioned problems with exterior doors. While I feel I understand the prope ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/15) -- One way that we control it is to use separate panels that way if there is failure the weathe ...

    polyurethane glue spreaders
    A message posted at WOODWEB's Adhesives Forum (12/15) -- I posted the to the furniture forum, and just realized this was the more appropriate forum f ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/15) -- You can figure on about 400 sq. ft of glue line per gallon. ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/15) -- How about the polystyrene reaction? ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (10/15) -- I used contact on a job 22 years ago. Two ply wood veneer on MDF. Shop got really hot over a ...

    55 gallon drums?
    A message posted at WOODWEB's Adhesives Forum (10/15) -- Jeff P or folks, On a drum of National Casein PL1000 it says "G51" does that mean ...

    New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/15) -- I am doing a table with a base that has roller coaster like curves. In the past I've used the ...

    Re: Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (8/15) -- The titebond brand works great at any point up to finish, my biggest gripe is finding a brigh ...

    Re: Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (8/15) -- We've got a 2' UV tube @ the sanding bench, mounted to an arm. Can also take it off the arm a ...

    Re: laminate glue
    A message posted at WOODWEB's Adhesives Forum (7/15) -- Mark55, With the H20, do you roll it on? Rolling contact cement has been messy with a lot of ...

    Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (7/15) -- I understand the purpose for using fluorescent glue in finding glue spots after the glue has ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/15/22) -- What Tom said. The problem is the unbalanced panel. I would not use T3 for veneer as it is ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/15) -- The color of the glue has no bearing on it's performance or quality. There are literally thou ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/15) -- Referring to two specific glues, I've noted that Elmer's white causes more problems in sandin ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/15) -- http://www.titebond.com/ImageCenter/Woodworking/White%20Glue/slides/15026.jpg ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (6/15) -- If your needs are occasional consider disposables, too -- we don't use them here in the shop. ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (6/15) -- I see that you use casein glue and the operation temperature is at 68 oF ( 20 oC). You should ...

    Re: Glue FR MDF
    A message posted at WOODWEB's Adhesives Forum (6/15) -- Hi Mike, Do you mean the adhesive for making FR MDF or the glue to be use in joining the FR M ...

    Best Wood Glue In Caulk Tube?
    A message posted at WOODWEB's Adhesives Forum (6/15) -- I am looking for the strongest wood to wood adhesive that is available in reg/small caulking ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/15) -- Also thanks for the heads up I would not have had a clue ,about the glue unless I read the po ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (5/15) -- We have been using the pressurized cans too. We are not making counter tops, but use it for a ...

    Re: Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (4/15) -- Wouldn’t a bar clamp or vacuum bag be more flexible, cost effective and efficient with space? ...

    strongestway to glue 3mm pvc on melamine...
    A message posted at WOODWEB's Adhesives Forum (4/15) -- Can't seem to find an answer to this question about PVC edge banding....I don't usually work ...

    Re: strongestway to glue 3mm pvc on melamine...
    A message posted at WOODWEB's Adhesives Forum (4/15) -- You probably shouldn't abrade the back as it has a primer on it. 3mm PVC has quite a bit of s ...

    Re: Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (3/15/26) -- I think D makes a key point about communication. And too reputation helps jumpstart an atm ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- I searched the forum but didn't really find definitive information Tom. I even posted the ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- I agree with Dave. You are overthinking this. It's a bench. Titebond has a long history of ...

    Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- I have seen a few videos showing the commercial construction of dovetail drawers where glu ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- ..." used widely in home builts..." not a glowing endorsement with the regularit ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- PVA. If in doubt use a glue line joint. Done ...

    Re: microwaveable safe glue
    A message posted at WOODWEB's Adhesives Forum (3/15) -- The West System epoxy guys have done extensive testing. Their epoxy starts to get a bit soft ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (3/15) -- We have had luck with gluing ipe with gorilla glue. We built a deck about 12 years ago with a ...

    Re: Paper-laminated foam board to wood?
    A message posted at WOODWEB's Adhesives Forum (2/15/24) -- Coat the wood with foam insulation adhesive, then press the insulation lightly against the ...

    Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/15) -- I need to make some wide panels for exterior doors, in Sapele. The panels are 58" x20&qu ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (2/15) -- Seems that the Wilsonart payouts are pretty selective and a paperwork-heavy process, but for ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/15) -- Like Blake mentioned, the water droplet test is a great tool to test for the activation (or g ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/15) -- Are both the wood temperature and glue temperature around 70 to 75 F? At cool temperatures, m ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/15/25) -- A PUR glue line is 6X thinner than an EVA glue line. It doesn't have the initial tack stre ...

    Re: Glue for metal
    A message posted at WOODWEB's Adhesives Forum (1/15) -- The best epoxy for metal is Loctite Epoxy Metal/Concrete, a two-part system consisting of an ...

    Re: Dying pva
    A message posted at WOODWEB's Adhesives Forum (1/15) -- Mix some of your newly acquired sawdust with wood glue, and be sure to have more wood than gl ...

    Re: adhesive from 1978
    A message posted at WOODWEB's Adhesives Forum (1/15) -- I cannot comment on the type of glue that this is since I was born the same year that those i ...

    Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/15) -- I thought I would post a recent experience so nobody else suffers unecessarily. I used to use ...

    Re: adhesives
    A message posted at WOODWEB's Adhesives Forum (12/14) -- Check out Roo Clear. You can get the small bottle to test for about $16 on Amazon. I recentl ...

    Re: Fire retardants.
    A message posted at WOODWEB's Adhesives Forum (12/14) -- There is a lot more that goes into manufacturing "fire doors" than using an additi ...

    Fire retardants.
    A message posted at WOODWEB's Adhesives Forum (12/14) -- Hi, Can someone advise me what fire retardants can be added to PVAc adhesives during compoun ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/14) -- I'm not too familiar with Franklin's PUR. I believe it is considerably thicker than the one ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/14) -- Jeff, What is the coverage per gallon? Also does it react it used on polystyrene? ...

    Re: Contour Banding with PUR glue
    A message posted at WOODWEB's Adhesives Forum (9/14) -- We use a virutex hand held bander with jowat 608.0 granular pur glue. Have the best luck with ...

    Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (9/14) -- I have traditionally sprayed the various lacquers in solvent based. Can't deal with the fumes ...

    Re: Adhesive Testing
    A message posted at WOODWEB's Adhesives Forum (6/14) -- Hello, The best way to test a glue joint is to allow the glue to cure for 24 hours and then c ...

    Adhesive Testing
    A message posted at WOODWEB's Adhesives Forum (6/14) -- Hi Can anyone advise me that how can I test my adhesive's bonding strength in my factory itse ...

    Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/14) -- Is there really a difference?....I started working in a shop a little over a year ago and a l ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/14) -- Which white glue do they use? ...

    HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/14) -- I work on Yachts. Have a situation with some horizotal interior surfaces of odd shapes need H ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/14) -- We use TB1 and tape. If I have a few to do, I will cut them at 45 on the tablesaw. Lay them f ...

    Re: Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (4/14/26) -- Some prospective customers want a "cabinet guy" as in 'I need a new cabinet guy ...

    Re: Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (4/14) -- There may be problems with the jacks leaking off over time. Most jacks will slowly bleed off ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/14) -- Do you ever use hot hide glue?If so,a rub joint would be quick,easy, and strong. ...

    Edgebanding with Polypropylene
    A message posted at WOODWEB's Adhesives Forum (4/14) -- Is anyone else using Polypropylene glue ? We have just started using it and im looking for mo ...

    Re: Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (3/14/26) -- First impressions are certainly important. Some clients will gravitate towards a slick new ...

    US Standards
    A message posted at WOODWEB's Adhesives Forum (3/14/23) -- Hi, What are the US Standards for Polyvinyl Acetate Based Adhesives and names of some Labs ...

    Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- Hi all. We as a result of some caution regarding the possibility of long term creep and li ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- The difficulty Tom is that standard rigid epoxies are known to fail adjacent to the bond l ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- My background Tom is engineering R&D - including with a number of years in adhesives d ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- I think you are being overly cautious. I'm leaning against a European beech bench that is ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- Most woodworking adhesive failures in my opinion are a cause of poor joint design or poor ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/14/22) -- PS. This paper sets out pretty clearly the reality that epoxies don't don't do so well in ...

    Re: glue pot temp roller temp
    A message posted at WOODWEB's Adhesives Forum (3/14) -- Wow thank you for the information. I have been trying this glue from Canplast 820010 45 CLEAR ...

    Re: glue pot temp roller temp
    A message posted at WOODWEB's Adhesives Forum (3/14) -- I have a different machine, but my temps are the opposite of yours. My glue pot is 190 and th ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/14) -- I can't say that TBII or III will creep out of joints every time. I know it did it enough on ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/14) -- Here is a pix before sanding and finish. Time will tell.... ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (2/14/24) -- Yes I agree that glue water base is not the way to go. If it helps I made these Mahgonay d ...

    Re: Paper-laminated foam board to wood?
    A message posted at WOODWEB's Adhesives Forum (2/14/24) -- Check the water content if PVA/waterbased adhesive doesn't affect the foamboard paper cove ...

    Re: Cabinet Makers: what removable labels do you use?
    A message posted at WOODWEB's Adhesives Forum (2/14) -- We have a thermal transfer label printer (zebra) so we use #654 (they have a plastic overlay ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/14) -- Sounds like the profile may have too much end grain glue surface, or the door may just be too ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/14) -- Yes, I suppose everything becomes money at some point. That isn't my interest. Sure, it would ...

    Re: Milling wood for epoxy adhesives
    A message posted at WOODWEB's Adhesives Forum (2/14) -- I guess I will just go with the best I can think of. I will make a longitudinal cut down the ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/14) -- We do already have popular products that look like wood, but are not. Some are Bamboo...it is ...

    Glue for PVC Edgeband manual application, 90-degree corner piecut cabinets
    A message posted at WOODWEB's Adhesives Forum (1/14/25) -- So for situations where you need to use a custom color edgeband that you cannot get in an ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/14/25) -- To the original poster, I've never seen a glue hold better than Titebond 2 or Titebond 3. ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/14/25) -- The only thing I would use a foaming polyurethane glue for is gluing up exterior slab pane ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/14/25) -- A nice diesel torpedo style heater will go a long way to helping you here. Also make sure ...

    Re: Contact adhesive and cracking lacquer - please help!
    A message posted at WOODWEB's Adhesives Forum (1/14) -- It's possible that the solvents in the lacquer might have gotten through and softened the adh ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/14) -- Gerry, I know the threads dead but did you ever discuss price? ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/14) -- If you are using contact cement don't use solvent type. It doesn't get along with the plastic ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (12/13/21) -- Yes, you need a minimum of 70F for the glue, wood, etc. You also need significant clampin ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (12/13/21) -- There's a great wood propeller maker that I watch sometimes on Youtube. She inherited the ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/13) -- The wintertime open joint problem is the result of having wood that is not at the same MC as ...

    Polyurethane Cleanup
    A message posted at WOODWEB's Adhesives Forum (11/13/25) -- Has anyone found a power tool that can cut off the squeeze out from Gorilla type glues af ...

    Edgebander Technology
    A message posted at WOODWEB's Adhesives Forum (11/13) -- What so you feel is the best technology in edgebanding and why? Laser, hot Air, or forced ai ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (11/13) -- Maybe I should add a qualifier to the use of vacuum pressing. If you haven't used it before ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (11/13) -- You can measure thickness by looking at the joint with about 100 x magnification. ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/13) -- Jeff- Any idea how the CP-0701 compares to the Titebond Polyurethane? ...

    Re: edge tape adhesive - chemically sensitive client
    A message posted at WOODWEB's Adhesives Forum (9/13) -- Thanks Bryan ...

    Re: Thermally treated lumber
    A message posted at WOODWEB's Adhesives Forum (9/13) -- Just a comment...PUR adhesives can vary in properties, with price often being a good guide to ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/13) -- Jim, I agree. I don't do boat work, which would incline me in that direction. Urea formaldehy ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/13) -- Wow, very nice work Captain Dan! I built stairs too and occasionally work on boats...I still ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/13) -- I question the necessity of epoxy. I know a lot of guys think that it is an absolute must but ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/13) -- Here's a photo of the finished stair ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/13/24) -- I prefer to go with a wood glue over the polyurethane type glue simply because of clean up ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/13/22) -- I would not use TB III with 1/8" veneer, balanced or not. I also see no reason to use ...

    Re: Spray adhesive causing problems with "no file" laminate trimmers?
    A message posted at WOODWEB's Adhesives Forum (6/13) -- Same issue, drives me bananas I do Millwork Installation, so I only run into this situation o ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (6/13) -- A few thoughts that might help. The comment from Larry should be in capital letters...it is t ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (6/13) -- I'd use Titebond 3 on walnut. It gives you a darker glue line. ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (6/13) -- Yes, I have been using this epoxy for about 15 or more years for that purpose, without any pr ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/13) -- I don't make a lot of doors .I was shocked to find trite-bound goes soft when it gets wet .I ...

    Re: "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (5/13) -- Could it be Plano clamps? John Costin Veneer Services Unlimited vsu@gwi.net (207)985-7221 Cus ...

    Re: Loose p-lam
    A message posted at WOODWEB's Adhesives Forum (4/13/23) -- Could you try liquid contact cement or a polyfix glue? ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/13) -- Big Leaf Maple - Acer Macrophyllum. That is a just a guess, thought I would throw it out ther ...

    Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/13) -- My friend gave me lot of log wood but I need know what kind of wood I live oregon ...

    Re: Possible rair of open glue lines with vacuum bag?
    A message posted at WOODWEB's Adhesives Forum (3/13/24) -- I don't see a way to use a vacuum bag to "repair" the seams. You know the only w ...

    Re: Possible rair of open glue lines with vacuum bag?
    A message posted at WOODWEB's Adhesives Forum (3/13/24) -- If 2 joints failed the rest just might fail as well. Recut and reglue, agreed. Why did the ...

    Possible rair of open glue lines with vacuum bag?
    A message posted at WOODWEB's Adhesives Forum (3/13/24) -- Hi, we have quite a bit of dimensional stock with multiple plys, and some of the glue line ...

    Re: glue pot temp roller temp
    A message posted at WOODWEB's Adhesives Forum (3/13) -- Each glue has a range of feed speeds and a range of temperatures recommended for best results ...

    glue pot temp roller temp
    A message posted at WOODWEB's Adhesives Forum (3/13) -- Practicing with some 3mm edge banding. Temp 200 on the glue pot and 190 on the roller. It dri ...

    Re: glue pot temp roller temp
    A message posted at WOODWEB's Adhesives Forum (3/13) -- depends on the glue you're using and what temperature limits it has ...

    Re: microwaveable safe glue
    A message posted at WOODWEB's Adhesives Forum (3/13) -- It looks as if there is not much to share on the subject. You get to be the pioneer and test ...

    Re: microwaveable safe glue
    A message posted at WOODWEB's Adhesives Forum (3/13) -- Tom, There are a bunch of variables that go into what you're looking for but I would say if y ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/13) -- Thank you, David. I didn't know that Titebond II would creep out of edge joints.I need to go ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/13/23) -- Probably a silly question but what glue are you using? We used to have intermittent proble ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/13/23) -- We are using Klieberit glue. I did some research and found that some plam manufacturers us ...

    Cabinet Makers: what removable labels do you use?
    A message posted at WOODWEB's Adhesives Forum (2/13) -- Cabinet makers: what removable labels do you use to label your cabinets during build/install? ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/13) -- Not all melamine board is created equal! Different wt. papers are used as well as different s ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/13) -- Thanks for the replies. Out tooling is insert carbide, we swapped out the knives and we are s ...

    Re: Fastcap Wood banding on MDF? Should I?
    A message posted at WOODWEB's Adhesives Forum (2/13) -- Depends on the unknown. We use it and in some places have it come loose on the ends, in other ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/13) -- the glue would only be stuck to the melamine surface so you joint would depend entirely on th ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/13/25) -- Yes, Looks like I need to do something to heat up the shop. ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (1/13) -- Where can I unsubscribe to find out the price? https://www.google.com/ ...

    Contact adhesive and cracking lacquer - please help!
    A message posted at WOODWEB's Adhesives Forum (1/13) -- I have read after-the-fact that contact adhesive and veneer are usually a bad combination. I ...

    Re: Holz Her Glue adjustment!
    A message posted at WOODWEB's Adhesives Forum (1/13) -- You can input negative numbers by putting a - before the number. Once you get it working prop ...

    Re: Contact adhesive and cracking lacquer - please help!
    A message posted at WOODWEB's Adhesives Forum (1/13) -- No ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/13) -- I second Melamine (Roo glue) never had a failure with pvc. Paul R ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/12) -- May not work for a heavy production run but you might consider a multi-use approach like a p ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/12) -- Dave, I am not sure what you have in mind or what you are looking for, but a glue spreader f ...

    Re: Beginners edgebanding questions
    A message posted at WOODWEB's Adhesives Forum (12/12) -- 1.) Clean it out now and start with what you know to be good clean glue. Take note of the co ...

    Gluing steel to aluminum
    A message posted at WOODWEB's Adhesives Forum (12/12) -- I need to glue 1/16" steel strips to an aluminum shade cover so the magnets in my wood ...

    Re: Edgebander glue pellet life span
    A message posted at WOODWEB's Adhesives Forum (12/12) -- Our edgebander uses a cartridge (Dorus HKP25) instead of a pellet. We rarely use the black b ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (11/12) -- You can apply too much pressure and loose strength...substantial strength. Indeed a joint ca ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (11/12) -- Pure academic curiosity, but how does one measure the thickness of a glue line? I have my St ...

    Re: Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/12) -- There are different glues in the Gorilla glue family. You probably should get a PUR. With th ...

    Re: Edgebander glue pellet life span
    A message posted at WOODWEB's Adhesives Forum (11/12) -- Hi Mike, I wouldn't be too concerned as there is no chemical change on use only a form chang ...

    Re: What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (11/12) -- the only glue that i have found to be FDA approved is tightbond III. I have used it on cutti ...

    Re: Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (10/12) -- ICA. ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/12) -- Years ago I did some testing on cedar after a conversation with Titebond tech people. It ove ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/12) -- Many years ago, before TB3, I glued up some exterior curved handrails in Locust, with TB2. O ...

    Re: Fillers.
    A message posted at WOODWEB's Adhesives Forum (10/12) -- I am not an industrial chemist so this is largely intuition, but I take "fillers" ...

    Re: Veneering over solid surface
    A message posted at WOODWEB's Adhesives Forum (9/12) -- I know www.saglumanist.com does some veneer work, but not sure if suitable for you, guess you ...

    Re: Thermally treated lumber
    A message posted at WOODWEB's Adhesives Forum (9/12) -- CP Adhesives has it, as well as many other types of glues. Their tech help is also pretty goo ...

    Re: Glue for veneer on Venetian blinds
    A message posted at WOODWEB's Adhesives Forum (8/12) -- Titebond 2 will give you a strong stable bond regardless of the heat and humidity. ...

    Re: Best Adhesive for End Grain Butcher Block
    A message posted at WOODWEB's Adhesives Forum (8/12) -- unibond is a great choice... and as david said, you can tint it easily with a universal pigme ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/12) -- The "why" I want to do this is to make a paying client happy. I didn't go into spec ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/12) -- Why would you want to do this? Doesn't make sense to glue such dissimilar materials together, ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/12/22) -- It's the glue go to these guys they have the right glue https://www.veneersupplies.com/cat ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/12/22) -- I also would like confirm that the construction and glue choice were the problem. You shou ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/12/22) -- Thank you Tom. I will go with MDF and veneer both sides. And my fingers crossed. ...

    Adhesive to help PSA disc
    A message posted at WOODWEB's Adhesives Forum (6/12) -- Is there a spray adhesiive that would help hold PSA disc on sanders. We get some that just wo ...

    Re: Aluminum Composite Panels
    A message posted at WOODWEB's Adhesives Forum (6/12) -- No attachment, Bob. ...

    Re: "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (5/12) -- No, not quite, although that's a nice clamp. When I say "a clamp that's 6-8 ft long" ...

    Re: "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (5/12) -- Maybe it was a custom clamp someone made from De-Sta-Co clamps and 8020 extrusion? ...

    Re: "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (5/12) -- Matt, is this what you're talking about? ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (5/12) -- Regular old yellow wood glue will be more than strong enough provided the surfaces are machin ...

    Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (4/12) -- Is anyone using the H shape shop presses ( 10 ton and up) made for arbor pressing etc.for glu ...

    Re: What Adheres to UV Ply?
    A message posted at WOODWEB's Adhesives Forum (3/12/22) -- I've used Melamine glue. But you need to sand the UV coating with 100 grit and the other s ...

    Re: Edge Gluing Hard Maple
    A message posted at WOODWEB's Adhesives Forum (3/12) -- What exactly is happening to the joint? Is it breaking along the glue line when failure testi ...

    Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/12) -- Anyone with experience doing really thick solid hardwood glue-ups? (6") We recently made ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/12) -- My experience comes from big newel posts. 4" is fine to be solid, but once we get to 5&q ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (3/12) -- I would hesitate to use Redwood unless you are matching historical work. It moves a LOT with ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/12/23) -- It is coming loose from the phenolic back. There is complete coverage on the particle boar ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/12/23) -- Odd… I’ve run laminate through our cartridge bander several times with no issue, I don’t t ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/12/23) -- Definetly have to prime with solvent based spray on contact cement. We had this issue and ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/12/23) -- We always prime the backside of the laminate with contact cement before slicing the lamina ...

    Re: adhesives over finishes
    A message posted at WOODWEB's Adhesives Forum (2/12) -- Regular old Melamine glue will probably stick better than you'd expect. I've had to remove dr ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (2/12) -- I recently had a project to do some 1/8" inlay strips in some interior doors where the i ...

    Re: unibond vs. PPR
    A message posted at WOODWEB's Adhesives Forum (2/12) -- We used literally thousands of gallons of Unibond before we bought our hot press; UB isn't re ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/12) -- You don't have to refuse their work, but can you afford to make the door twice? While not all ...

    Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/12) -- We have been building doors for years. Recently the strength of the joint has been weak. In t ...

    Re: 3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/12) -- I have seen this happen with too much pressure on the pressure roller. I adjusted my pressure ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/12) -- Bill, Have you checked your tooling for sharpness? Could it be that your tongue and grove are ...

    Re: Door Joint Strength
    A message posted at WOODWEB's Adhesives Forum (2/12) -- Buy a brand new bottle of glue. Perhaps both of your bottles got too cold. What's your shop t ...

    Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/12/25) -- We have a large project coming up where we are using a high gloss gray hpl for doors with ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/12/25) -- Bozzy, Shop is 5000 sq ft My edge bander does not have a heat panel device, I think the pr ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/12/25) -- Does your edgebander have a panel heating device that is ahead of the glue pot? It's speci ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/12/25) -- Not sure what your volume is, but it seems like you need to start heating your shop. We sp ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/12) -- I would think if you ran the penetrating epoxy on the soft area and then perhaps just hit the ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/12) -- thanks for the reply. will check out the product a little more. ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/11) -- I use type 2 PVA because its quick, easy and reliable - no worries about mixing, temperature ...

    Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/11) -- Anyone have any pics of shop made glue spreaders for applying glue to strips of wood for pan ...

    Re: Beginners edgebanding questions
    A message posted at WOODWEB's Adhesives Forum (12/11) -- No bander aficionado here but from my brief knowledge, 1. It will be difficult to say how of ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (12/11) -- A UF resin would work fine but it really needs to be pressed for an extended amount of time. ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (12/11) -- I am going to be post veneering faceframes after the box is assembled and large wall panels ...

    Re: contact adhesive for thick veneer
    A message posted at WOODWEB's Adhesives Forum (12/11) -- Contact glue is never good for veneers, despite what some may say/do. It is a non- rigid glu ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (11/11) -- I will not pretend to be a wood or glue expert, but I thought the idea of starving a joint b ...

    Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Have a project coming up to make 2 overhead garage doors. I made one in the past which faces ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Hi Tom, ours is CP-0701 https://www.cpadhesives.com/woodworking-adhesives/cp-0701-polyuretha ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Tom, I'd suggest looking at a reactive polyurethane glue. It will give you a better exterior ...

    Re: Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Jeff, I am not familiar with this. Is there a product/ brand?? ...

    Fillers.
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Certain adhesives are loaded with fillers, whereas others are without any filler whatsoever. ...

    Re: Sizing Compound
    A message posted at WOODWEB's Adhesives Forum (9/11) -- Many shops use a sizing compound to prevent over-penetration of adhesive on edges and faces o ...

    Re: Board widths
    A message posted at WOODWEB's Adhesives Forum (9/11) -- I would rethink using the basswood in a cutting board. Also, make sure you use at least Titeb ...

    Re: Board widths
    A message posted at WOODWEB's Adhesives Forum (9/11) -- The basswood is just for pizza peels. The cherry and maple are the cutting boards ...

    Thermally treated lumber
    A message posted at WOODWEB's Adhesives Forum (9/11) -- We are launching into our first Thermally treated lumber project. My supplier tells me I need ...

    Glue for veneer on Venetian blinds
    A message posted at WOODWEB's Adhesives Forum (8/11) -- Hi I need to glue veneer to Venetian blinds slats. Slats are made from basswood. At the windo ...

    Board widths
    A message posted at WOODWEB's Adhesives Forum (8/11) -- We are gluing up maple, cherry and basswood. Typically we use 5 pcs but some times there are ...

    Re: Board widths
    A message posted at WOODWEB's Adhesives Forum (8/11) -- Bob, If anything, additional glue lines will make it stronger and more stable. Certainly soak ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/11) -- Wilsonart 500 & 600 are "brush/roller" grade. If you are using spray grade that ...

    Re: Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/11) -- Thank You for your response Scott, I used Premier PB950 brush grade and a adhesive roller cov ...

    Re: Glue for PVC Edgeband manual application, 90-degree corner piecut cabin
    A message posted at WOODWEB's Adhesives Forum (6/11/26) -- Matt, For this kind of manual PVC edgeband work I would separate three issues: the primer/ ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (6/11/26) -- Bozzy, On the 0.5mm vs 1mm question, the glue line is not necessarily thinner in a measure ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (6/11/26) -- GeneWengert's points about glue line thickness and temperature are the fundamentals that t ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/11/24) -- As stated many times, all professional wood glues, when used properly, can provide joints ...

    Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/11/24) -- If I'm building a wooden bookshelf for my living room, which adhesive should I use to ensu ...

    Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/11/22) -- A client asked for a desk top that was reversible, with wood on one side and leather on th ...

    Re: Veneer adhesive disaster
    A message posted at WOODWEB's Adhesives Forum (6/11/22) -- Sapele both sides. MDF is fine as a substrate. The choice of glue was not the issue in thi ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/11) -- Obviously, you have it right for gluing for width and joinery. If you have not un into any co ...

    Re: drum sander
    A message posted at WOODWEB's Adhesives Forum (5/11) -- Thanks for the reply Eddie. I did not mention that the machine is 2 months old. I will check ...

    "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (5/11) -- We are looking for a type of clamp that may just be mythical or some figment of my imaginatio ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/11) -- Inverting rings is a myth. Wood moves (mostly) in response to changes in moisture content. Th ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/11) -- I agree that alternating rings on flat sawed panel glue up is a myth. To me, it is much more ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/11) -- I think your clients are barking up the wrong tree. There are millions of dishwashers with la ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (4/11) -- We have also recently had problems. Every other day I am getting calls that things are delami ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/11) -- I too like the super glue. Use it as Bruce described, and even if it is really wetted down, i ...

    Re: Glue for PVC Edgeband manual application, 90-degree corner piecut cabin
    A message posted at WOODWEB's Adhesives Forum (3/11/25) -- I tried the above methods but they didn't work for long. ...

    Re: What Adheres to UV Ply?
    A message posted at WOODWEB's Adhesives Forum (3/11/22) -- Nothing . Sand down to raw wood. ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (3/11) -- Tape is your friend when doing miter folds. it acts like your clamp and you get a perfect mit ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/11) -- I have has d issues with TBII or III raising out of the glue line. Even weeks or months later ...

    microwaveable safe glue
    A message posted at WOODWEB's Adhesives Forum (3/11) -- Hi Is there a a glue that is microwaveable safe just need a drop to fix my part? thank you.. ...

    edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (2/11/23) -- We are having a problem with plam strips adhering to particle board substraint with our ed ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/11) -- It depends upon your location. In the US Midwest, we use 8% as the Equilibrium Moisture conte ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/11) -- Thank you David I ordered the book. I'm in New York were there are some climate variations . ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (2/11) -- We do a lot of this type of job, we run the boards trough the moulder with glue line cutter h ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (2/11) -- I'm not sure what are you doing, if your are pouring epoxy resin as a finish, you can try use ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (2/11) -- Great glue for specific purposes. My most frequent use for it is as a clamp for miters. The g ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (2/11) -- Our experience is TB2 is great indoors. TB3 is the Balls! Critical places (handrails) TB3. Ju ...

    P2-10
    A message posted at WOODWEB's Adhesives Forum (2/11) -- We've just started trying this product. I do see some of you are using. Curious what you have ...

    Re: unibond vs. PPR
    A message posted at WOODWEB's Adhesives Forum (2/11) -- I also hate a) shipping water and b) standing around stirring powdered glue. Solution: UltraC ...

    Re: 3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/11) -- I once had a bander that had a chain that would make the panel move away from the fence as it ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/11) -- You can glue melamine board to any raw wood or wood product using a melamine glue. BUT you sh ...

    Re: glue squeeze out
    A message posted at WOODWEB's Adhesives Forum (2/11) -- Chris has a good solution. I wouldn't use a wet rag on porous wood (Oak,) just soaks the glue ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/11) -- Franklin makes a melamine specific glue. Roo glue is melamine specific as well. As others hav ...

    Re: Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/11) -- I have to describe myself as a skeptic when it comes to the idea you have proposed. With that ...

    Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/11/23) -- Hi, We are getting some bubbles/lifting in raw veneer and the bubbles are following the gr ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/11) -- it will not require stain but will require a poly finish and I want it to look natural and no ...

    adhesive from 1978
    A message posted at WOODWEB's Adhesives Forum (1/11) -- We have about 10,000 pounds of red oak and poplar woodwork in the shop, originally made in 19 ...

    Re: National Casein 750
    A message posted at WOODWEB's Adhesives Forum (1/11) -- I went to their site to see what the 750 is - properties, uses, etc. - and find the site is i ...

    Re: National Casein 750
    A message posted at WOODWEB's Adhesives Forum (1/11) -- Thanks, I got ahold of Spectrum Adhesives and will try their products. ...

    Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/11) -- We are realizing a greater demand to provide counters with 3mm PVC edgeband applied. We have ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/11) -- What are you using now for adhesive that results in 10% failure? We have used melamine glue w ...

    Re: Contour bander glue options
    A message posted at WOODWEB's Adhesives Forum (12/10) -- Rusty, Yes, the Virutex does a nice job for us. The only issue has been the slight distortin ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/10) -- We do a quick pass with 80 grit on a 6” Festool to provide more “tooth” to the substrate. ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (12/10) -- We are having a difficult time finding a water based contact cement. Is there a specific bra ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (12/10) -- Most any of the non-flammables are water. DAP/Weldwood, Formica, Wurth Brand, Wilsonart. ...

    Re: Edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (12/10) -- Good information provided. Jowat makes good glue. Follow standard operating procedures and y ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (12/10) -- An inspection by a qualified person will likely give us the reason for delamination. However ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (12/10) -- You mention Unibond. Are you thinking about Unibond 800? This is a UF adhesive...urea formal ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (12/10) -- Are there Polyurethanes available in small shop quantities...ie a couple of quarts or a gall ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (12/10) -- PUR also does not have any moisture, which be a help sometimes. However some PUR adhesives a ...

    Re: contact adhesive for thick veneer
    A message posted at WOODWEB's Adhesives Forum (12/10) -- 3/16" solid wood acts like wood, not veneer. Rules I've seen say that you need to get t ...

    Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (11/10) -- We need to stick a lot of 1/4" plywood skins to uv prefinished plywood. Does anyone hav ...

    Re: Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/10) -- The material is reading 8.5 - 9 % Just to be safe I'm planning on the gorilla glue. ...

    Re: Adhesive strength.
    A message posted at WOODWEB's Adhesives Forum (10/10) -- I reface kitchen cabinets and use veneer that comes with a 3M adhesive (already applied on i ...

    Sizing Compound
    A message posted at WOODWEB's Adhesives Forum (9/10) -- I am curious to know what "Sizing Compound" is used for? Thanks ...

    Re: Sizing Compound
    A message posted at WOODWEB's Adhesives Forum (9/10) -- Adhering gold leaf ...

    Brass Adhesive
    A message posted at WOODWEB's Adhesives Forum (8/10) -- I am looking for advice on gluing 16 gauge brass to MDF. In the past we have used Wilsonart 5 ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/10) -- Hi David, We don't have any of the Planet out there for a decade or longer. I did use there d ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (7/10) -- Yellow dye was added years ago to trick folks into thinking it was more like hide glue and no ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/10) -- There is a reason you don't see this. It is because it won't work. There is a chance it may w ...

    Re: Wood adhesive for blue gum
    A message posted at WOODWEB's Adhesives Forum (7/10) -- Do a test with Original Titebond. As long as the parts are not under stress it will likely ho ...

    Re: Strong Adhesives.
    A message posted at WOODWEB's Adhesives Forum (6/10) -- The secret is in the surface prep, not so much the glue/adhesive. All of the TiteBond PVA's a ...

    Re: 3m NS920 contact adhesive
    A message posted at WOODWEB's Adhesives Forum (5/10/22) -- Why doesn’t hot melt glue stick? It can be analyzed from the following four aspects: 1. Th ...

    Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/10) -- This a follow up from a few threads in the last couple of years. I have been making doors and ...

    drum sander
    A message posted at WOODWEB's Adhesives Forum (5/10) -- I have a 18x36 Grizzly drum sander and it is leaving peaks and valleys in the wood. I am usin ...

    Re: drum sander
    A message posted at WOODWEB's Adhesives Forum (5/10) -- Are the belt pressure rollers clean? Trash on them would push down the belt. Making your vall ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/10) -- did you invert each plank so that the grain is opposite to the next one ? there's a good vide ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/10) -- Titebond II bonds well to plam. Hundreds of sheets no failures. Recent discussions with an el ...

    What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (3/10) -- I have to glue up stair treads on salvaged Long Leaf Heart Pine. The stairs will be interior, ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/10) -- If inside miters are opening, then your wood is too wet, or your miters are inaccurate, or bo ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/10) -- Thank you David for your amazing suggestions. I will buy the moisture meter and check the woo ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (2/10) -- The reason you have difficulty with epoxy is that, as you know, it generates the heat needed ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (2/10) -- Find out what humidity the owner will have in the wintertime, such as 35% RH. Then, take all ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (2/10) -- One of my clients mentioned that WA was helping with repairs...you might want to contact them ...

    unibond vs. PPR
    A message posted at WOODWEB's Adhesives Forum (2/10) -- i recently purchased a 5 gallon container of unibond ... and that got me thinking, why am i u ...

    Re: structural gluelam adhesives? Who to talk to?
    A message posted at WOODWEB's Adhesives Forum (2/10) -- I 2nd the resorcinol. Sets hard and water proof. Follow the temperature recommendations. It i ...

    Re: structural gluelam adhesives? Who to talk to?
    A message posted at WOODWEB's Adhesives Forum (2/10) -- I believe that epoxies cannot be used, because of high temperature(fire) failures. Resorcinol ...

    Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/10) -- I cut a 2 x 3 foot cabinet out of 3/4 Melamine. The 3/4 melamine is laminate on both sides. S ...

    Fastcap Wood banding on MDF? Should I?
    A message posted at WOODWEB's Adhesives Forum (2/10) -- To anyone who has done any wood banding with fastcap peel and stick on MDF. Is this a viable ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/10) -- You need to use dowels, screws, biscuits, dados with glue. Anything except just glue to the m ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/10) -- It will not adhere to the melamine. ...

    Re: Glue for Melamine cabinet
    A message posted at WOODWEB's Adhesives Forum (2/10) -- Rabbet through the melamine. ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/10) -- What about Smiths CPES or any of the penetrating epoxies from West or TotalBoat. All should w ...

    choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/10) -- Looking for some advise from other shops. We are using tightbond origional yellow glue for ou ...

    Re: choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/10) -- Apply the glue to one surface. Usually the rail in a door. There should be enough glue for go ...

    Re: choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/10) -- Mike, A few thoughts about your glue process. If your edges are freshly machined you shouldn' ...

    Re: choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/10) -- Thanks for the advise Jeff. The only problem i can see with freshly machined parts is that th ...

    Re: choosing the correct glue
    A message posted at WOODWEB's Adhesives Forum (1/10) -- We run a tremendous amount of doors and stuff like butcher block tops, along with plastic lam ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/9) -- David, that is a very good idea, we will try several different intervals - just machined, mac ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/9) -- Test glue several joints - some with fresh surfaces, and some with months old surfaces. Recor ...

    Beginners edgebanding questions
    A message posted at WOODWEB's Adhesives Forum (12/9) -- Hey everyone, Long time lurker in these forums, first time poster. New to the industry (sort ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (12/9) -- We layup 2" xps with hardboard and ply skins that then go on the CNC. The only options w ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (12/9) -- JIM, I have seen that with LOW VOC glues coverage and pressure are key in the bonding ability ...

    Hot melt film for veneer/edgeband?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Anyone know of a source for hot melt glue film, either in sheets or rolls? Basically the type ...

    Re: ADHESIVE FOR BONDING LEAD SHEET TO WOOD
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Agreed with the above. I think I'd make sure the back of the lead was oxidized reasonably wel ...

    Re: Hot melt film for veneer/edgeband?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Might a hand held bander work? I can't imagine what you couldn't band with one unless you are ...

    Re: Hot melt film for veneer/edgeband?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- I would also contact Oakwood Veneer and or Superior veneer I bet you could get any species yo ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (10/9) -- David & Jeff, thanks for posting, that's the info I was looking for. ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (10/9) -- We use a vacuum pressing system. We have a 5X10' frame press that can do moderate curves. 4X8 ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/9) -- A better solution is water based contact. Not temperamental about short open times. It just n ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (10/9) -- "The fine glue spread has less telegraphing on veneers than hand troweled wood glue.&quo ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Larry, How do you do the front of a curved reception desk? Or any vertical surface with a woo ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Larry, Henkel makes a Water based contact cement? What is the name and number on it. thanks ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Titebond used to make a white PVA. Very few people in the US use white. The Titebond1 is the ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Didn't know there are hundreds of PVAs. I guess I would then ask, why use any of these other ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- From Franklin's web site: Titebond White Glue is an exceptionally strong, economical white gl ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Chris, Ditto on what Jeff said. This color issue has been brought up many times and the color ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Chris, The color of the glue is not an indicator of performance. You should choose your adhes ...

    White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- I used to work in Germany 10 years ago. In our shop we used white glue almost exclusively. Th ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/9) -- Titebond Original (or similar) is perfectly acceptable for all of the applications you mentio ...

    Contour Banding with PUR glue
    A message posted at WOODWEB's Adhesives Forum (9/9) -- I am looking for someone that is contour banding with PUR glue that would either be willing pe ...

    Re: g flex west system
    A message posted at WOODWEB's Adhesives Forum (9/9) -- Jamestown Distributors are the go to guys for anything marine on the east coast. They have eve ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/9) -- I just had this experience. Rich's approach is the one I used and it worked out fine. Try Smoo ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/9) -- Sounds like guys who are using contact daily which may make a difference? If you guys re-read ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/9) -- I have a sense that a significant amount of resin stays adhered to the thickener particles in ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/9) -- Hi Kevin- to give an answer to your problem I´m missing the kind of basic material.Is is PB, M ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/9) -- Does anyone have info per the 4th dimension -time? I have observed frequent adjustment is need ...

    spraying contact cement
    A message posted at WOODWEB's Adhesives Forum (7/9) -- We are spraying out of a 55 gallon drum with two CA guns, and a binks air pump. What size tips ...

    Re: Fluorescent Glue & Sandability
    A message posted at WOODWEB's Adhesives Forum (7/9) -- Matthew... What brand and model # of blacklight are you using. I am wanting to get a blackligh ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (6/9) -- I agree with wood guy miter folds I've done 10' long I've done a ton of the veneer work and ti ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (6/9) -- Solution is found and it was right in front of me and no one even though of it. I use "He ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (6/9) -- I would suggest first using a etching primer then a resin glue dry time is based on moisture d ...

    Re: Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (5/9/22) -- It is recommended to change the glue brand ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/9) -- Please see the 2:01 mark in the video link to learn a great way to glue lock miters with the L ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/9) -- Not sure why the question or if you have a unique application. We have done 16' long faux beam ...

    Re: Fillers.
    A message posted at WOODWEB's Adhesives Forum (5/9) -- Adding fillers in theory does reduce absorption into the wood. Wipe the wood surface with some ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/9) -- Thanks for the help everyone. So Titebond II will bond well with the phenolic backing of lamin ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/9) -- Our fabricators have been laminating the bottom edges of the tops throughout for years. By def ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/9) -- It would seem the added cost in materials and time would bring you close to solid surface. Why ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Might try a Hoffman bow tie machine ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Not sure of the glue, guessing epoxy. He said it took roughly six weeks, with four days to ins ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Matt, I am taking this post off track. L have a few questions on the process of how the floori ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Geoff and Matt, It's ok with me to take this thread off topic. I am also interested in you're ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (3/9) -- I use polyester resin. I tinted some black but that extended the cure time. Using clear, it st ...

    Re: Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/9) -- I don't know a lot about tires -- I just know that our Pizzi can be pressurized with a regular ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Mel, I wrote a fair amount the other day. Raised panels: 1. shape the profile 2. sand mdf end ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Bah!! We are totally old school. Told the painter today about your spackle. Her eyes got all w ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/9) -- Adam--no need to sand and reprime?? Wowsers. I like that. On it. Let you all know how it goes ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (2/9) -- I hope the boxes are small. Otherwise the joints on two edges that are cross grain may break w ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (2/9) -- I did a test yesterday using white glue with a mix of UTC white and yellow yesterday and came ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (2/9) -- Weve used transtint on several occasions. UTC may be better for opaque but any universal dye w ...

    Re: Tinted glue
    A message posted at WOODWEB's Adhesives Forum (2/9) -- You can tint pva with dye. Beat to start with white glue but any will work. ...

    Re: unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/9) -- I feel like any PVA glue is going to give more springback than plastic resin glue, but maybe t ...

    Re: unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/9) -- After some thought, I may use titebond 2 extend for these curves. I’m concerned about shop tem ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (2/9) -- This is a wilsonart problem. Talk to your wilsonart rep. We have projects with both 1730/1731 ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (2/9) -- We are a small fabricator in PA and in the last 2 months have had to fix six jobs that were fa ...

    Re: Wilsonart WA1730 Contact
    A message posted at WOODWEB's Adhesives Forum (2/9) -- WA 1730 is made in Temple TX across the parking lot from the laminate plant. ...

    Re: Are you going to IWF?
    A message posted at WOODWEB's Adhesives Forum (2/9) -- I will be there. I hope to meet you. ...

    masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (2/9) -- hi everyone, I'm Romain from France. I have been working with wood for a while but this was my ...

    Re: masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (2/9) -- They say you always remember your first time..... I remember my first attempt at veneering. It ...

    Re: masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (2/9) -- Methyl Hydrate (wood alcohol) works to gently soften tape adhesive. Moisten a rag and rub resi ...

    Re: masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (2/9) -- Hi David and thanks for your humour and response. I used titebond special veneer. first tooth ...

    Re: masking tape residues on veneer and marketry issues
    A message posted at WOODWEB's Adhesives Forum (2/9) -- Mineral spirits, alcohol, acetone are all solvents that should not affect the veneer or the gl ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/9) -- Gene, I have seen this in entire houses of mitered casings that have never seen a sander. Fran ...

    EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- I wonder what type or brand other people using for their edge banders I have a SCM K230 edg ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- If screws and dowels along with glue are a must, then do the screws hold it together until ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- A properly proportioned, well fit mortise and tenon joint will increase the glued surface a ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- A properly proportioned, well fit mortise and tenon joint will increase the glued surface a ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- Not disagreeing with you. But modern stuff is rarely mortise and tenon. I see 7/8" dow ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- I understand. I set my parameters on two things - what is the best way to do it? What is th ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- Wood glue like Titebond or Gorilla Wood Glue is an excellent choice, as it creates a bond t ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- Dowels on high use passage and exterior doors are a good idea because they do add strength. ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/9/25) -- Gorilla glue (poly) has been found to be among the weakest of the wood glues. It has the ad ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/9) -- I've never used it before myself, but I've heard of people using a stabilizing resin. I think ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/9) -- what is the thinning agent and do I mix the sawdust in with it or just apply it as is? Thanks ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/9) -- You can add saw dust or just plain. Depending if you need to fill gaps. Perley ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/9) -- thanks. all help is most appreciated. ...

    Re: RE: Gluing together Oak pieces for table
    A message posted at WOODWEB's Adhesives Forum (1/9) -- for interior titebond ...

    Re: Edgebander Technology
    A message posted at WOODWEB's Adhesives Forum (1/9) -- Insufficient information. The right machine is going to be the machine that produces the produ ...

    Re: Epoxy problems
    A message posted at WOODWEB's Adhesives Forum (1/9) -- On darker colored woods, I have used fiberglass resin with good success, even stain grade, so ...

    Re: Contact adhesive Simalfa 745
    A message posted at WOODWEB's Adhesives Forum (1/9) -- We use a water borne, made by ITW called STA'PUT Z100.Two notes of caution: Don't put it on th ...

    Contact adhesive Simalfa 745
    A message posted at WOODWEB's Adhesives Forum (1/9) -- Looking for alternative contact adhesives that do not have Methylene Chloride and are not solv ...

    Re: burl veneer glue
    A message posted at WOODWEB's Adhesives Forum (1/9) -- Joseph, Will the burl be two plied???? I always worry when talking about gluing any burls/crot ...

    Re: burl veneer glue
    A message posted at WOODWEB's Adhesives Forum (1/9) -- It is not 2 ply. Raw veneer on the substrate which is fiber core ...

    3m NS920 contact adhesive
    A message posted at WOODWEB's Adhesives Forum (12/8/21) -- Hi all! Long time lurker first time poster: Does anyone have experience using 3m ns920+ on ...

    Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (12/8) -- We are doing some remodel work on a client's motorhome. Part of the process requires laminati ...

    Re: Edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (12/8) -- We are running 288.60 in an Akron 1440 and used it in a Lato 38 for years with absolutely no ...

    flammable contact cement
    A message posted at WOODWEB's Adhesives Forum (12/8) -- I have a question about contact adhesives. The commercial shop I work in is looking into find ...

    Re: Contour bander glue options
    A message posted at WOODWEB's Adhesives Forum (11/8) -- I am not familiar with your bander but the over heating might be a result of the banding dist ...

    Re: Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/8) -- I've used just regular elmers or tb wood glue on all my ERC chest. Air dried lumber here in K ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- LOW VOC Methyl Acetate Glues are very different from traditional contact cements. The air pre ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- Richard, While I can't speak directly to the Wilsonart product, I did notice that this is the ...

    Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (10/8) -- I had an interesting conversation about Flammable solvent based LOW VOC contact cement and Ve ...

    Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- About a year and a half ago we switched to Wilsonart 1731 spray adhesive. Now we are having c ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- Great information Robert! I would definitely agree that there is no inherent problem with the ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- Yeah we have had a glue rep in here and they said it was our spray pattern. If the glue is th ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (10/8) -- Wilsonart adhesives plant is in Temple TX next to the laminate plant. ...

    Re: Wilsonart WA1730 Contact
    A message posted at WOODWEB's Adhesives Forum (10/8) -- Where was Wilsonart 1731 adhesive manufactured? ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (9/8) -- If you can cya, I'd go for it. I'd consider vacuum infusing epoxy--the thin clear variety-- af ...

    Re: edge tape adhesive - chemically sensitive client
    A message posted at WOODWEB's Adhesives Forum (9/8) -- Richard. I would try to get a little history of this sensitivity. I am a Internal med/pediatri ...

    Re: Solid surface couter edge
    A message posted at WOODWEB's Adhesives Forum (9/8) -- Thanks Dave, ...

    g flex west system
    A message posted at WOODWEB's Adhesives Forum (9/8) -- best place to buy g flex from west systems? ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/8) -- We use liquid Mixol tints all the time in epoxy, hasn't stopped it from curing yet. For small ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (8/8/24) -- Wood glue. Gorilla glue is best with with oily woods such as teak. ...

    Strong crosslinker
    A message posted at WOODWEB's Adhesives Forum (8/8) -- Hay! I am searching for a strong crosslinker for melamine formaldehyde resins in paper laminat ...

    Re: pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/8) -- Dan, that sounds like something I posted. I don't recall if I was using WEST or system 3 at th ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/8) -- we use pemko they work really well, We have used the on exterior doors and interior doors for ...

    Re: Fluorescent Glue & Sandability
    A message posted at WOODWEB's Adhesives Forum (7/8) -- Matthew: I've never made a guitar but often use hide glue in my furniture work because of it's ...

    Contact spreader
    A message posted at WOODWEB's Adhesives Forum (7/8) -- Has anyone a recommendation for a hand held solvent contact adhesive spreader? As a custom woo ...

    Re: Fluorescent Glue & Sandability
    A message posted at WOODWEB's Adhesives Forum (7/8) -- Worry no more and look no more. Wilsonart Lokweld yellow wood glue is your answer. It contains ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (6/8/25) -- A 4x8 vacuum frame table is about as good a method as you can get for this. It will give yo ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (6/8/23) -- We had sort of the same problem but our machine is much older. We found the top bushing on ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (6/8/23) -- We figured it out. We adjusted the shoe further out so its more distant from the roller. Th ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (6/8/23) -- Keep in mind the cabinet part should not touch the glue roller, only the glue. ...

    most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/8) -- Gents, I am only familiar with production of laminate countertops using spray-on contact adhes ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/8) -- I would trust a type two pva such as Titebond II more than contact cement for steam and more i ...

    Re: most water-resistant laminate glue method?
    A message posted at WOODWEB's Adhesives Forum (4/8) -- Exterior grade plywood and epoxy. A better substrate and a far better adhesive. Clamp in a vac ...

    Re: National Casein 750
    A message posted at WOODWEB's Adhesives Forum (4/8) -- Call me at 612-812-6139. I have a resource. ...

    Re: accu-system glue
    A message posted at WOODWEB's Adhesives Forum (4/8) -- We tested both pre-glued and glue injection when we got our machine over 10 years ago. Went wi ...

    Re: accu-system glue
    A message posted at WOODWEB's Adhesives Forum (4/8) -- We've used preglued dowels in our Accu HPJ for 10 years now. We've dealt with some minor rust ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/8) -- I'd use super glue from Fast Cap. Get the "thick" which will give a little more open ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/8) -- I have $60k kitchens that are 15 years old that I used Muralo spackle on. Many of those are wa ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/8) -- Mel, Skip the glue on MDF. Try to use ultra refined MDF for a start it is less porous. Sand th ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (3/8) -- Muralo Pro Grade Spackle This product is a gift from the wood finishing Gods. Every other spac ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (2/8/22) -- Thanks for the update, looks easy at first glance it looks easy but it's tricky.It looks, k ...

    Tinted glue
    A message posted at WOODWEB's Adhesives Forum (2/8) -- I've got a job gluing up maple boxes. 4 sides and a top all mitered together. It's a struggle ...

    Re: adhesives over finishes
    A message posted at WOODWEB's Adhesives Forum (2/8) -- https://tytan.com/shop2/tytan-adhesive/ maybe this will work? ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/8) -- i dont have the luxury of telling customers of 20 years that i dont want their work. they give ...

    Milling wood for epoxy adhesives
    A message posted at WOODWEB's Adhesives Forum (2/8) -- Personally, the question is professional in that, that is how I want to solve all problems. Bu ...

    Making "wood"
    A message posted at WOODWEB's Adhesives Forum (2/8) -- I recently bought some materials from Lee Valley Tools, and they were looking for feedback. Fe ...

    punky wood
    A message posted at WOODWEB's Adhesives Forum (1/8) -- I have a maple slab about 48" diameter that I have slab milled to 2 1/2" thick. Afte ...

    Re: punky wood
    A message posted at WOODWEB's Adhesives Forum (1/8) -- The wood turners use thin CA glue. Perley ...

    National Casein 750
    A message posted at WOODWEB's Adhesives Forum (1/8) -- We have used National Casein Urea Resin 750 for over 33 years and now it is no longer availabl ...

    RE: Gluing together Oak pieces for table
    A message posted at WOODWEB's Adhesives Forum (1/8) -- Which glue holding 3 to 4 pieces of oak hardwood together for making a tabletop is advisable t ...

    Re: Holz Her Glue adjustment!
    A message posted at WOODWEB's Adhesives Forum (1/8) -- John give Lee Johnson a call at Lakeside Industrial in South Carolina. Great guy who can help ...

    Re: Holz Her Glue adjustment!
    A message posted at WOODWEB's Adhesives Forum (1/8) -- Thanks Brian Do you have his contact number, or I should search on the net? Kind Regards J. ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/8) -- A picture of what they wanted is at the website below. (The white 3 compartment box, on the le ...

    Re: Stirring Glue
    A message posted at WOODWEB's Adhesives Forum (1/8) -- A simpler solution, buy It in one gallon jugs. (2 jugs / carton) Not much difference in cost, ...

    burl veneer glue
    A message posted at WOODWEB's Adhesives Forum (1/8) -- What kind of glue would you recomend for walnut burl in a cold press for a rigid glue line and ...

    Re: burl veneer glue
    A message posted at WOODWEB's Adhesives Forum (1/8) -- Unibond 800 available from vacuum pressing systems in Maine. Or, any other UF resin. ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (12/7) -- We also have been in business for 28 years, switched to the low VOC glue and two tears later ...

    Re: Adhesive - pH
    A message posted at WOODWEB's Adhesives Forum (12/7) -- Abraham, I think you have hobbies like bookbinding, box-making or card-making as well as crea ...

    contact adhesive for thick veneer
    A message posted at WOODWEB's Adhesives Forum (12/7) -- We are currently cutting our own bookmatched veneers for applying to finished end panels of k ...

    Re: HOLZ HER EDGE BANDER
    A message posted at WOODWEB's Adhesives Forum (12/7) -- Your glue temperature is too high. Lower both settings by 5 degrees and run a test. If you st ...

    Re: HOLZ HER EDGE BANDER
    A message posted at WOODWEB's Adhesives Forum (12/7) -- i'm above that temp and primed bands are falling off. ...

    Re: Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/7) -- Now I'm told 11 years not 8. Wondering if Gorilla glue would work. That's what we use for a l ...

    Re: Adhesive Legginess
    A message posted at WOODWEB's Adhesives Forum (10/7/21) -- If you touch the adhesive and pulling away you get stringy/webs between you and the substr ...

    Adhesive Legginess
    A message posted at WOODWEB's Adhesives Forum (10/7/21) -- Can anyone explain what legginess is when it comes to contact cement. I am not sure but I ...

    Re: Adhesive Legginess
    A message posted at WOODWEB's Adhesives Forum (10/7/21) -- I think Mark has it. My experience with Helmitin is that they are very responsive when I h ...

    Re: Adhesive Legginess
    A message posted at WOODWEB's Adhesives Forum (10/7/21) -- Thanks for that. Cheers ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (10/7) -- In conversation with glue techs, I have been told that water based glues benefit from the sol ...

    Re: Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (10/7) -- Powdered plastic resin (aka urea formaldehyde resin) should be treated the same way as a pva ...

    Re: Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (9/7) -- Like wise go with epoxy it gives you more time before it gets sticky. Most importantly make th ...

    Re: Any difference in appearance by using acrylic glue in polyester
    A message posted at WOODWEB's Adhesives Forum (9/7) -- Voids the warranty. It cannot be better and is likely a worse bond. Why take the risk? How can ...

    Re: "Beam" clamps? For edge gluing long, smaller items
    A message posted at WOODWEB's Adhesives Forum (9/7) -- The first thing that I thought of is a Mobil Press. The one leg of the glue up needs to be lon ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/7) -- I have used both Formica sprayable red solvent based contact cement as well as "950 Wilso ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/7) -- Part numbers: We spray Wilsonart 800 (red) or 801 (clear) glue from the 5-gallon pails, a quar ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/7) -- I get my contact glue from Louis & Company and use whatever they are promoting. Currently ...

    Re: dorus cartridge swelling, Hkp 25
    A message posted at WOODWEB's Adhesives Forum (8/7) -- We use HKP-21 and HKP-25; the shop is poorly-controlled for moisture and humidity. (It's an ol ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/7) -- Maybe Bruce and Chip could share the exact product type and number of something that lasts in ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/7) -- My experience is the same as Bruces. Same pressure pot and hoses, can't remember ever having t ...

    pre-mixing thickener to resin prior to adding hardener
    A message posted at WOODWEB's Adhesives Forum (8/7) -- I just came across this portion of an old post by a contributor re. doing a larger and involve ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/7) -- I'm with Chris. You'll be sorry, if you try this. No adhesive can stop that 3/8 thickness from ...

    exterior wood bond to metal plate
    A message posted at WOODWEB's Adhesives Forum (7/7) -- Have a project replacing wood elements on a wood & metal push / pull plate on exterior gla ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (6/7/26) -- Armando, From the edge banding and adhesive side, I would treat this as a temperature/wetti ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (5/7/22) -- No problem John, and thanks for the input. The difficulty in this territory is that it's ha ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (5/7/22) -- I just don't see the likelihood of such extreme wood movement as to require using G-Flex ov ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (5/7/22) -- I certainly wouldn’t lose any sleep over it. My example of the boat decks defy most of the ...

    Re: Curved staircase - staircase skirt
    A message posted at WOODWEB's Adhesives Forum (5/7) -- Probably a little late with my response but i'd use a trowelable construction adhesive. Trowel ...

    Re: strongestway to glue 3mm pvc on melamine...
    A message posted at WOODWEB's Adhesives Forum (5/7) -- Nothing sticks 3mm as well as adhesive applied with an automatic edgebander. ...

    Aluminum foil stick to XPS foamboard
    A message posted at WOODWEB's Adhesives Forum (4/7/25) -- Can someone direct me to the Adhesive I can USe to stick Aluminum to XPS foamboard? I know ...

    Re: West System 6/10
    A message posted at WOODWEB's Adhesives Forum (4/7) -- Six10 is a good product. We frequently use it on the boats. It costs a bit, however, the time ...

    Re: National Casein 750
    A message posted at WOODWEB's Adhesives Forum (3/7) -- Oh this is terrible. Such good adhesives. The casein adhesives also. This economy took such a ...

    Re: unibond vs. PPR
    A message posted at WOODWEB's Adhesives Forum (3/7) -- I personally do not like the idea of soaking my wood with water (water based glue)and then hop ...

    unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/7) -- I was wondering if anyone has experience using this product for exterior work. I have some lam ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/7) -- Thank you David for the beautiful technical informations. I use hard maple and the frames are ...

    Re: unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/7) -- I have used it extensively for laminations that are exposed to cold and wet environments each ...

    Re: unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/7) -- Kevin, Unibond 800 should (when used properly) meet HPVA Type II water resistance standards. E ...

    Re: unibond 800 exterior use
    A message posted at WOODWEB's Adhesives Forum (2/7) -- Thanks, I appreciate the help. ...

    adhesives over finishes
    A message posted at WOODWEB's Adhesives Forum (2/7) -- Looking for an adhesive that will stick to a finish. Usually use a nitro lacquer for finish, b ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (2/7) -- 3M blue tape should leave no residue for at least 6 months. That's if its a fresh roll. Regula ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (2/7) -- Do a google search for removable labels and/or non-permanent labels. Can get them at any stati ...

    Re: Laminating Extruded Polystyrene Foam (XPS) to Luan
    A message posted at WOODWEB's Adhesives Forum (1/7) -- Maybe im over simplifying it, but could you use expanding foam? Some kinds don't expand as muc ...

    Re: Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (1/7) -- I have been using GreenLight Coatings for about 4 to 5 years Workd very good. I spray there se ...

    RE: Support Backing Boards
    A message posted at WOODWEB's Adhesives Forum (1/7) -- We have 2 ft. x 2 ft. .032 aluminum sheets in which we require a stiff, thin backing board to ...

    Re: Gluing torrified ash
    A message posted at WOODWEB's Adhesives Forum (1/7) -- I have worked with torrified ash and oak. I used Titebond II and III for interior and exterior ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (12/6/23) -- 123.hp.com: Printer Setup & Installation Frustrated while setting up your printer by a ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (12/6) -- Have used the resorcinol several times now. What I've found is that the time you have after m ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (12/6) -- I agree with @Larry's response. It does sound like you may have differential movement between ...

    Re: Aerosol contact cement on prefinished ply?
    A message posted at WOODWEB's Adhesives Forum (12/6) -- The glue of choice for me as far as prefinished ply is RooClear. ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (12/6) -- Hey there. I would say get your some resorcinol. Goodluck! ...

    Re: HOLZ HER EDGE BANDER
    A message posted at WOODWEB's Adhesives Forum (12/6) -- That might be a little hot: Jowat recommends a range of 180-200 C for that glue. You will nee ...

    Edgebander glue pellet life span
    A message posted at WOODWEB's Adhesives Forum (11/6) -- I have a small edgebander that is pretty lightly used, I've used maybe 1/8 of the bag over 3 ...

    Missouri Cedar
    A message posted at WOODWEB's Adhesives Forum (11/6) -- What is the best adhesive to use on Missouri aromatic Cedar? I won't know the exact moisture ...

    Re: Glue for veneer on Venetian blinds
    A message posted at WOODWEB's Adhesives Forum (9/6) -- How do you make a Venetian blind? Stick your finger in his eye. Carry on........ ...

    Re: Sprayable water based
    A message posted at WOODWEB's Adhesives Forum (9/6) -- We've been using water borne contact for 20 years. Currently spraying out of a pressure pot. D ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (9/6) -- Just like Rich, Dorus primer, spray full sheets. Have had no problems since we went this route ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/6) -- Thanks all for the advice, I will try these and see what works best for this application. The ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/6) -- I wouldn't advise any liquid coloring agent to epoxy, serious risk of ruining the chemical mix ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (8/6) -- I have used the same pressure pot for more than twenty years. Only cleaned it a few times and ...

    Re: drum sander
    A message posted at WOODWEB's Adhesives Forum (7/6) -- I don't use the grizzly, I've used Powermatic and Supermax twin drums. Between the two, the Su ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (7/6) -- So testing is done. I've bonded the steel to 3/4 D3 Maple (Columbia) with Titebond II, Loctite ...

    Re: PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (6/6) -- Viscosity(mPa• s)：150,000±1,000(120℃) Density：1.18g/ cm3 @ 25° ...

    Re: Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (6/6) -- Sealed auto light PUR adhesive It has good heat resistance, elasticity and anti-aging and fast ...

    Re: Plane Off TiteBond III?
    A message posted at WOODWEB's Adhesives Forum (6/6) -- Cedar? As in Western Red Cedar? Yes, you can plane the glue off as long as it is dry. If it is ...

    Re: Plane Off TiteBond III?
    A message posted at WOODWEB's Adhesives Forum (6/6) -- Yeah I've heard that about wr cedar but I've never had a problem. I scuffed up / scratched bot ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (5/6/22) -- Recommended glue supplier ...

    Re: PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (5/6) -- PUR Is a great product it offers thinner glue lines, water resistance, heat resistance and if ...

    Re: DE Lamination headache
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Simplest solution with practically no mess, use a quick setting PVA adhesive and secure with b ...

    Re: contour edgebanding
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Try filling your glue pot to what you are going to use. you are probably filling the glue-pot ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (5/6) -- All glue companies recommend priming HPL. Find a good primer or if in a bind mix 50% paint gra ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Check your hose. contact glue should flow through a liquid hose(usually Black) not an air hose ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Yellow Dye was added years ago to identify glue with less water, thus faster drying. ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (5/6) -- 1. The canister glues cost a lot more per square ft because you are paying for the gas to prop ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (5/6) -- We have used DAP Plastic Resin for many years without issues. It's a structural adhesive and h ...

    Re: Wilsonart WA1730 Contact
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Don't forget PRESSURE. The old days of using a block of wood or a three head flooring roller a ...

    Re: Wilsonart WA1730 Contact
    A message posted at WOODWEB's Adhesives Forum (5/6) -- Absolutely correct Robert B. Applying UNIFORM downward pressure (30-40 psi minimum) is critica ...

    Re: Adhesive that bonds UV coated Wood
    A message posted at WOODWEB's Adhesives Forum (4/6) -- Just to clarify, melamine glue only works for gluing non-porous to porous surfaces and it cure ...

    Re: PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (4/6) -- Why do you want to use PUR? Are you making parts that are in a high moisture environment? We h ...

    accu-system glue
    A message posted at WOODWEB's Adhesives Forum (4/6) -- We just installed a accu-system glue bore and dowel cnc machine,it was purchased used . Just w ...

    Re: solid surface join problem
    A message posted at WOODWEB's Adhesives Forum (4/6) -- Go online and find their fabricators manual. I would also recommend a sheet of white melamine ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (4/6) -- like all thread,,,, at what intravals ? ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (4/6) -- Through bolt. ...

    Professionalism and the "First Bond" with Clients
    A message posted at WOODWEB's Adhesives Forum (3/6/26) -- Hi all, We talk a lot here about the technical specs of adhesives—open time, viscosity, and ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (3/6/23) -- We prime wood and laminate with Titebond original thinned 50% with water. Heat will activat ...

    Re: Edgebander not giving good results - only on particle core...
    A message posted at WOODWEB's Adhesives Forum (3/6) -- Do you have a heater on the fence of your edgebander or a heat lamp prior to or just after the ...

    Adhesive that bonds UV coated Wood
    A message posted at WOODWEB's Adhesives Forum (3/6) -- Im trying to find a better way to bond 1/4" skins to UV plywood. Currently the guys are s ...

    laminate glue
    A message posted at WOODWEB's Adhesives Forum (3/6) -- I've used spray contact adhesive some for laminate tops, but haven't built a laminate top in s ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (2/6/25) -- I keep my shop at 60 in the day but when I run the bander before it heats up I use this hea ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (2/6/22) -- Kevin, We are staying the course with west system epoxy. All siding is prefinished with Rub ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (2/6/22) -- Also, we will soften sharp miters and tough up with more Rubio Monocoat ...

    Re: Titebond on teak siding
    A message posted at WOODWEB's Adhesives Forum (2/6/22) -- Curious why you don't answer the question I asked ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (2/6) -- Here are a couple of thoughts that might help. First, fold one end of the tape back on itself ...

    Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (2/6) -- My company has been using blue painters tape and/or general stickers to label cabinets, closet ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (2/6) -- Hey Ben, if you're using blue tape I'm assuming you write them out by hand (as opposed to prin ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/6) -- One instance where glue lines swell is when there is a heated finishing oven or when there is ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/6) -- I agree with John above on the 'start over' comment. Brutal, but true. It just is not good pra ...

    Re: 3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/6) -- Just a thought, but..... Does it start to get thinner at the same distance from the leading ed ...

    Re: 3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/6) -- glue is there. We ran an 1.5 thick 96" long panel with no banding to check glue line. Loo ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (1/6/26) -- Veneer bubbling in hot presses is often linked to adhesive choice, spread rate, and press t ...

    Gluing torrified ash
    A message posted at WOODWEB's Adhesives Forum (1/6) -- Hello all. I've been playing with torrified ash and I'm having issues with the glue bond. I'm ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/6) -- I would definitely use BB for the bottom. Rich is right on the assembly tape miter fold. Dado ...

    Re: Gluing torrified ash
    A message posted at WOODWEB's Adhesives Forum (1/6) -- You need to use polyurethane adhesive with all thermally modified woods ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (1/6) -- So I've been contacted to post results. Here they are: I had said that I was going to use a fr ...

    Re: Stirring Glue
    A message posted at WOODWEB's Adhesives Forum (1/6) -- Gary, Stirring your Titebond glue before use is definitely a good idea. A couple other pointer ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/5) -- Thanks a lot for your input. I believe we will give Epoxy a shot for this particular applicat ...

    Re: Edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (12/5) -- Glues come with recommended temperature ranges based on track speeds. "Open time" i ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/5) -- Your posting has given me information about the glues. I was searching about it. Thanks for s ...

    Contour bander glue options
    A message posted at WOODWEB's Adhesives Forum (11/5) -- Looking for advice for contour banding with PVC edge tape on melamine panels. I currently use ...

    Re: Glue for metal
    A message posted at WOODWEB's Adhesives Forum (11/5) -- 3m VHB tape ...

    Re: My best glue brush in 40 years
    A message posted at WOODWEB's Adhesives Forum (11/5) -- I have also used synthetic taklon artists brushes for glue. They are easy to wash out and las ...

    Re: What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (10/5) -- While you will find it hard to get a manufacturer to state definitively, modern glues are con ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (9/5/24) -- For building a wooden bookshelf, regular wood glue is the better choice compared to Gorilla ...

    Re: Glue for veneer on Venetian blinds
    A message posted at WOODWEB's Adhesives Forum (9/5) -- The slats most likely have a finish on them either paint or a clear coat you will need to adhe ...

    edge tape adhesive - chemically sensitive client
    A message posted at WOODWEB's Adhesives Forum (9/5) -- I have a client that is chemically sensitive and I was wondering if anyone could advise me as ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (8/5) -- I'm with the others in this thread: We will always experience confusion when we use homeowner ...

    Re: exterior wood bond to metal plate
    A message posted at WOODWEB's Adhesives Forum (8/5) -- I second Keith's 3M 5200 Sikaflex makes several poly adhesive/sealants that are similar. ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (7/5) -- PERCEPTION runs the argument. In the States yellow is stronger and Brown is even stronger. But ...

    Re: Strong Adhesives.
    A message posted at WOODWEB's Adhesives Forum (7/5) -- All wood glues that pass ANSI or ASTM for bond strength should not fail. The wood should alway ...

    Fluorescent Glue & Sandability
    A message posted at WOODWEB's Adhesives Forum (7/5) -- Hello Everyone, First time poster here, and I'm looking for some advise. I'm a guitar maker an ...

    Plane Off TiteBond III?
    A message posted at WOODWEB's Adhesives Forum (6/5) -- so I glued up some clear 2x8 and didn't wait long enough for the glue to dry and the two piece ...

    Aluminum Composite Panels
    A message posted at WOODWEB's Adhesives Forum (6/5) -- Hello All, We are working on our Exterior Alum. Clad door designs and am trying to source or p ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (6/5) -- did you bother to click the link at the bottom of my post? This is a boat building epoxy sourc ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (6/5) -- Keith, Yes I have been in communication with the marine epoxy company that you posted. It is a ...

    Re: Curved staircase - staircase skirt
    A message posted at WOODWEB's Adhesives Forum (5/5) -- Thanks Jared. Would you use a standard PL premium or is there a better option? I have never us ...

    What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/5) -- What is the best glue and application method for long lock mitre joints. ...

    Re: Wood ground to concrete
    A message posted at WOODWEB's Adhesives Forum (5/5) -- Thanks! I don't have any experience with that. After woodworking for over 40 years you start g ...

    Re: Wood ground to concrete
    A message posted at WOODWEB's Adhesives Forum (5/5) -- Good question. I didn't know what to call them either. A 2x4 fixed to a concrete colum for mea ...

    Re: Wood ground to concrete
    A message posted at WOODWEB's Adhesives Forum (5/5) -- What's a "wooden ground(buck)"? ...

    Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (5/5) -- We normally make treads out of 5/4 and edge glue using elmers glue all. never had an issue, BU ...

    Re: Bonding Galvanized Roofing
    A message posted at WOODWEB's Adhesives Forum (5/5) -- I'm heading over to the local distributor in the morning, as luck would have it. I'd like to u ...

    Re: Bonding Galvanized Roofing
    A message posted at WOODWEB's Adhesives Forum (5/5) -- I would try using 3M panel bonding adhesive. This is a 2 part epoxy that gets used for auto bo ...

    Re: Adhesive that bonds UV coated Wood
    A message posted at WOODWEB's Adhesives Forum (4/5) -- You could try a Melamine glue, they are made to glue to non porous surfaces. Otherwise polyure ...

    Re: Adhesive that bonds UV coated Wood
    A message posted at WOODWEB's Adhesives Forum (4/5) -- ROO-GLUE guys works like a charm!!! no more sanding UV ply to skin with MDF! Just Glue and Go! ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (3/5/25) -- We recently started using a hydraulic hot press for veneering 3/4" UV plywood, but we’ ...

    Re: Gluing torrified ash
    A message posted at WOODWEB's Adhesives Forum (3/5) -- I built a 10’ long dining table out or torrified ash and used Titebond 3 without any problems. ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (3/5) -- I use the thin to stabilize punky wood, incl soft knots in alder. It wicks into hairline crack ...

    Re: Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/5) -- John, thanks for the clarification. Is this a specific type of tire inflation chuck? My search ...

    Re: Glue FR MDF
    A message posted at WOODWEB's Adhesives Forum (3/5) -- The glue depends on the fire rating you need to get. Contact cement works the best. Most PVA's ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/5) -- Stefano is following the instructions for miters from when white glue was the primary wood glu ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/5) -- Simply use Titebond1 yellow glue. Do not water it down. Put enough glue on so you need to wipe ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/5) -- Thank you Adam but the wood need to prepare in some way otherwise the pores of the end grain w ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/5) -- How about "don't do it." If you spend some time searching this site you will find pl ...

    Glue choice for TFM - TFM (thermally fused Melamine)
    A message posted at WOODWEB's Adhesives Forum (1/5/26) -- We have a "Cleaf" job and some of the end panbels are 1.5" thick. We need to ...

    Holz Her Glue adjustment!
    A message posted at WOODWEB's Adhesives Forum (1/5) -- Hi group! I have a problem for awhile, and can't figure out how to adjust the glue in the pane ...

    structural gluelam adhesives? Who to talk to?
    A message posted at WOODWEB's Adhesives Forum (1/5) -- I am in the engineering field but building a unique personal barn with some gluelam trusses. I ...

    Holz Her Edge Bander
    A message posted at WOODWEB's Adhesives Forum (12/4) -- Have a holz herr sprint, wondering what people have the main heater and the nozzles set at. W ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (11/4) -- JUST TO SAY I ENJOYED THE thread - client interested in copper kitchen cabinets so i was look ...

    Sprayable water based
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Does anyone know of or recommend any water based contact spray ? Thank you. Not aerosol cans, ...

    Re: Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Epoxy, Gorilla glue, and liquid nail are three adhesives that work well on applications such a ...

    Re: Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Thanks guys for the responses. I'll keep them in mind for the future. I already installed the ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/4) -- The polyester resin in gelcoat is green. You will need to add alot of pigment to achieve a goo ...

    coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Can anyone offer some advice on what I could use to tint clear epoxy white. Thanks in advance. ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Buy white casting resin. Epoxy is usually amber colored and making bright white will be tough. ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (9/4) -- How about a white pigment like an artists oil color or a White UTC. ...

    Re: Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (9/4) -- Have you tried ROO-GLUE. ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/4) -- We mostly use them for interior doors that require sealed door bottoms for code reasons like f ...

    Re: Best Adhesive for Bonding 3/8" Burl Slab to Glass
    A message posted at WOODWEB's Adhesives Forum (7/4) -- Disasters waiting to happen...or it could work....anybody's guess. I wouldn't bet on it workin ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/4/26) -- For an indoor bookshelf, standard PVA wood glue like Titebond II is the clear choice. The c ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (6/4/24) -- I know this isn't related but what you are seeing is similar to what happens if the glue or ...

    Re: Strong Adhesives.
    A message posted at WOODWEB's Adhesives Forum (6/4) -- Epoxy is a two part adhesive that will harden and sticks to old adhesives when doing a repair. ...

    Strong Adhesives.
    A message posted at WOODWEB's Adhesives Forum (6/4) -- What are stronger than wood adhesives. What is the strength requirement for such adhesives. Ca ...

    Re: How to clamp 4' x 8' sheets evenly
    A message posted at WOODWEB's Adhesives Forum (5/4/26) -- Vacuum frame table is the right answer for this kind of volume work and the pressure math b ...

    Re: EVA glue for edge banders
    A message posted at WOODWEB's Adhesives Forum (5/4/26) -- The edgeband primer tip is something people overlook constantly — old stock sitting in a co ...

    Re: US Standards
    A message posted at WOODWEB's Adhesives Forum (5/4/23) -- Hi @KiranKumar, how's your researching going? ...

    Curved staircase - staircase skirt
    A message posted at WOODWEB's Adhesives Forum (5/4) -- I have a curved staircase and had to create a skirt to cover some defects in it after installi ...

    Re: Curved staircase - staircase skirt
    A message posted at WOODWEB's Adhesives Forum (5/4) -- Construction adhesive and lots of bowed sticks. ...

    Re: Wood ground to concrete
    A message posted at WOODWEB's Adhesives Forum (5/4) -- Moisture cure poly-urethane adhesive comes in a tube. You can even glue tile,to concrete. I li ...

    Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/4) -- Hi guys, I cut and planed 3 perfectly straight pieces of 3/4" plain cut walnut. I wanted ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/4) -- The panel cupped because one side lost moisture faster than the other. I would guess the panel ...

    Bonding Galvanized Roofing
    A message posted at WOODWEB's Adhesives Forum (5/4) -- The designer wants a curved bar clad in corrugated roofing. (see attached) Although the panels ...

    Re: Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (4/4/24) -- Had the same problem with exterior tri-bound, when the glue gets wet it gets soft then when ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (4/4/24) -- Using a high-quality polyurethane adhesive will help ensure strong and durable bonds for yo ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (4/4/22) -- I suggest you do a few tests to convince yourself that yellow glue sets in less than an hou ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (3/4) -- The titebond version I hadn't seen before. Seems to be restrictive in use.. Do you find it tha ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Not sure what you mean by restrictive in use. ...

    Re: Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Those glue tanks are supposed to be portable, so the air fitting is a tire inflation fitting. ...

    Re: Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (3/4) -- We went to water borne adhesive about 20 years ago to avoid exposing employees to the health r ...

    Wilsonart WA1730 Contact
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Being a long time Wilsonart distributor of their HPL & adhesives we have some of our fabri ...

    Re: casein glue
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Very few glues are happy 2 less than 60! If you see any "chalking" things were too c ...

    Glue FR MDF
    A message posted at WOODWEB's Adhesives Forum (3/4) -- What is the best glue to use for fire rated MDF? ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Luis - I assume you are building frame and panel? But then the other poster made me think you ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (3/4) -- Hi David, the doors are actually 2 slabs glued together, they are installed in a wine tasting ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/4) -- Adam, I'm jointing hard maple picture frames. I'm using white glue instead of yellow because t ...

    Re: End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/4) -- More information. ...

    bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/4) -- getting ready to bond 1/4 inch thick veneers to both sides of 1 3/4 solid core door. consideri ...

    Re: Alaskan Yellow Cedar
    A message posted at WOODWEB's Adhesives Forum (2/4) -- I agree with Gene. A few years ago we did a large interior millwork project with AYC and we us ...

    Re: Alaskan Yellow Cedar
    A message posted at WOODWEB's Adhesives Forum (2/4) -- Correction: precure, not procure ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (1/4) -- I'd go with the 3M 5200 also, but one thing you should know, is that a thick joint is your fri ...

    Re: wood metal to wood
    A message posted at WOODWEB's Adhesives Forum (1/4) -- Thank you Keith for your suggestion. Yes the panel is 40x30 inches. If I well understood bette ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/4) -- If you tape/miter fold the boxes and use Titebond, just tape the last miter and set off to the ...

    The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/3) -- I have been using Dr a natational casual product and it has worked until now it is not bondin ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/3) -- It just occurred to me that when I wrote "too thin" that it might not be clear that ...

    Adhesive - pH
    A message posted at WOODWEB's Adhesives Forum (12/3) -- High strength PVAc glues generally have a very low pH, between 2.5 and 4.5. Why so? Do glues ...

    Re: Glue for metal
    A message posted at WOODWEB's Adhesives Forum (11/3) -- Double stick tape? Whats the application? Kind of vague question... ...

    Re: Melamine miter fold best glue for
    A message posted at WOODWEB's Adhesives Forum (11/3) -- Particle board glued to particle board is not a great prospect. Neither side is really smooth ...

    My best glue brush in 40 years
    A message posted at WOODWEB's Adhesives Forum (11/3) -- I've used acid brushes for glue brushes for 40 years. This brush is a big upgrade! Made by La ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (10/3/24) -- For building a wooden bookshelf, PVA glue (polyvinyl acetate) is often recommended for its ...

    Re: Adhesive strength.
    A message posted at WOODWEB's Adhesives Forum (10/3) -- Somebody will have a more scientific answer on how the adhesives industry actually executes t ...

    Re: Adhesive strength.
    A message posted at WOODWEB's Adhesives Forum (10/3) -- Truth is, almost all wood glues will pass Tirion's test (even Elmer's all-purpose white). As ...

    Re: adhesive advice
    A message posted at WOODWEB's Adhesives Forum (9/3/23) -- How many gallons of adhesive are you talking about? ...

    Re: 1443 Holzher / PUR hot melt
    A message posted at WOODWEB's Adhesives Forum (9/3) -- I am not familiar with that machine. Why do you want to use PUR? What tape will you be using a ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (9/3) -- We prime all HPL with Dorus EB primer and have no issues. We apply primer with spray gun befor ...

    Re: PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/3) -- I would guess that the banding is failing in areas where it is exposrd to high humidity. The c ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/3) -- If we ever install one, we use the Pemko products. They appear durable, but I have no idea of ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (7/3) -- Karl, yes I press all my Gorilla glue projects and my epoxy ones as well. You can turn down th ...

    Re: aluminum to styrofoam bonding
    A message posted at WOODWEB's Adhesives Forum (6/3) -- Doenst really speak to your hot press but the only thing that we have had success with for ext ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (6/3) -- The trick is in the prep not the glue. I'd use Franklin original. ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (6/3) -- It does sound like both of you are talking about clear finishes. That is helpful and good info ...

    Re: Epoxy and veneering
    A message posted at WOODWEB's Adhesives Forum (6/3) -- Thanks guys, this is helpful ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (5/3/24) -- Does anyone know if there is anywhere in writing that says not to bond PLAM with an edgeban ...

    Wood ground to concrete
    A message posted at WOODWEB's Adhesives Forum (5/3) -- What's the best (preferably caulk tube style) adhesive for fastening wooden ground(buck) to co ...

    Re: Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (5/3) -- Whoops, Light PLY. That was a typo. We use this material to get the weight down on flip tops. ...

    Re: 3m NS920 contact adhesive
    A message posted at WOODWEB's Adhesives Forum (4/3/22) -- Spoke to a 3m rep and this is fine for use on curved surfaces. Hope this helps someone in t ...

    West System 6/10
    A message posted at WOODWEB's Adhesives Forum (4/3) -- i just finished gluing some box beams using West System's " 6/10" which comes in a c ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/3) -- The reason for the question is this, sometimes I have to take a particle core wood door let's ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/3) -- The biggest problem you have with not allowing enough dry down time is the risk of trapping so ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/3) -- Use a fast tac yellow glue. Contact cement is the weakest adhesive there is. Sorry for the sni ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/3) -- osb is a cheap poor substrate. One side is pressed smooth the other side has this funky emboss ...

    Re: Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/3) -- You can take the loose fitting piece off, and using some teflon tape, snugly screw on a 1/4&qu ...

    Re: Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/3) -- Thanks Jeff ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (3/3) -- Thanks Rich, If this fails, which hopefully it wont, and if it does , it can be milled to make ...

    End grain gluing
    A message posted at WOODWEB's Adhesives Forum (2/3) -- I wonder if someone have suggestion for end -grain joint. Yellow glue or white glue? Any brand ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (2/3) -- I just had massive water damage to one of our properties. Its a circa 1825 2 story carriage ho ...

    Re: Contact adhesive and cracking lacquer - please help!
    A message posted at WOODWEB's Adhesives Forum (2/3) -- I feel your pain. I have been there too many times. I would say, unless you have absolutely no ...

    Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/3) -- I've seen a lot of posts here that mention the appearance of a glue line over time. I have alw ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/3) -- The only times I have had a glue line swell was when using an oil finish. I am no chemist but ...

    Re: Glue that becomes adhesive with moisture
    A message posted at WOODWEB's Adhesives Forum (2/3) -- Polyurethane glues are typically moisture cure. The most common are like the Gorilla Glue bran ...

    Re: Alaskan Yellow Cedar
    A message posted at WOODWEB's Adhesives Forum (2/3) -- Why TB3? TB or TB2 would work just as well. In any case, avoid excessive pressure, and assembl ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (1/3) -- Seems to me there are several variables that have not been taken into account. Like.. where (o ...

    Re: HELP....I am trying glue cedar to metal outside
    A message posted at WOODWEB's Adhesives Forum (1/3) -- Hmmmm... so the doors in question are "Man" doors like the one in the background of ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (1/3) -- The OP (original poster) said "Dr, a national casual", but the correct name is " ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (1/3) -- They are floating panels . The are raised panels , and with they weather change it takes longe ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (12/2/21) -- I mix it with warmish water and I would leave it 24 hours in the clamps. ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/2) -- I am on the side of Epoxy. West System or Total Boat. Overkill or expense be damned. So, you ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/2) -- The problem with Unibond 800 is that it is water based. I've had good luck using it and Plast ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/2) -- Under the for what it's worth category... I would suggest a UF resin such as Unibond. It's ea ...

    Re: Exterior glue
    A message posted at WOODWEB's Adhesives Forum (11/2/23) -- We did a pile of laminated teak exterior handrails including radius ends. Those were done ...

    Glue for metal
    A message posted at WOODWEB's Adhesives Forum (11/2) -- Forum- need expert opinion: Looking for an adhesive that is extremely strong yet can also be ...

    Melamine miter fold best glue for
    A message posted at WOODWEB's Adhesives Forum (11/2) -- When miter folding melamine I have been having a problem with the miter opening up when dryin ...

    Re: Melamine miter fold best glue for
    A message posted at WOODWEB's Adhesives Forum (11/2) -- Epoxy? ...

    Re: Flammable Contact Cement & OSHA Ristrictions
    A message posted at WOODWEB's Adhesives Forum (10/2) -- If you go to a water based contact may I suggest 3 things. 1. Read the tech data carefully. R ...

    Re: Wilsonart - Formica Adhesive switch
    A message posted at WOODWEB's Adhesives Forum (10/2) -- This may be very late BUT. Are you switching from 950 to 268 because you need a "Green&q ...

    Re: What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (10/2) -- Depends on what heat you expect. I would use epoxy. Healthwise, it can't be any worse than co ...

    Re: adhesive advice
    A message posted at WOODWEB's Adhesives Forum (9/2/23) -- I don't know any shop that thinks adhesive is a high percentage cost for the project. Besid ...

    Re: Diluent for pressed wood glue
    A message posted at WOODWEB's Adhesives Forum (9/2) -- You are looking for a solvent. It needs to dissolve the glue after it cures. Diluents also kno ...

    Re: Wood Epoxy
    A message posted at WOODWEB's Adhesives Forum (8/2) -- Maybe WEST systems epoxy from West Marine. ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/2) -- Hi Gary, We started to use some by Planet they are sold by Bridgeport. They have several model ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (7/2) -- Hey Craig Thanks for the response! Ive done some testing, and have found Gorilla brand glue ex ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (5/2) -- Some years back we were very excited about a tote packaging system that was essentially what y ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (5/2) -- Chris we have several Jolly Colla's which is a similar glue dispensing system. We go through a ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (5/2) -- Hi Mark, Didn't realize that was you until now! Good to see you at the Charlotte show and glad ...

    Re: Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (5/2) -- "substrates such as lightly" What is "Lightly"? ...

    Re: Edgebanding with Polypropylene
    A message posted at WOODWEB's Adhesives Forum (5/2) -- I'd like to know more about it. Brand and stock #? How has it been working for you? Better tha ...

    Re: Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/2) -- Why would you want to use it for something it's not intended for? Kinda like asking "if I ...

    Contact cement
    A message posted at WOODWEB's Adhesives Forum (4/2) -- I do not use this stuff that often so I have a rookie question...I know you are supposed to wa ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (3/2/25) -- I'm not surprised you are having problems with UV coated plywood. That surface is very smoo ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (3/2/25) -- Be aware that veneering to one side of the plywood will likely cause warping. You will be a ...

    Re: Hot press and adhesive probles on veneer
    A message posted at WOODWEB's Adhesives Forum (3/2/25) -- Thank you for your contribution, Tom. To clarify, the UV plywood is currently being sanded; ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- Not sure of the glue. But I believe he just gets a bunch of sections ready, and makes a big st ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- There is a reason this is not seen. It does not work, or will take so much time and trouble th ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- A good friend of mine who is considered the best wood floor guys in northern Michigan, makes s ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- Matt, That's amazing, sort of makes me dizzy to look at. I don't imagine you know what glue he ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- I did a test with TB II and BASF MasterWeld 948, a polyurethane adhesive. Pretty impressive re ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/2) -- David, I think some gaps will look ok and was going to sand it before finishing. Not trying to ...

    Pizzi compressor fitting
    A message posted at WOODWEB's Adhesives Forum (3/2) -- Just got the 9001 Pizzi glue tank and the fitting for the compressor hookup is unfamiliar. I w ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (2/2/22) -- FWIW, Weldwood Plastic Resin Glue has not been manufactured "for several years" I ...

    Re: Plastic resin joint failure
    A message posted at WOODWEB's Adhesives Forum (2/2/22) -- Thank you for the update John. I just purchased some DAP Plastic Resin Glue so I suppose th ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Greg - You are right, it is often hasty to make proclamations about what can and can't be done ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Are you using banding made for contouring? Much more flexible! I don't know if that flexibilit ...

    3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Poor adhesion on trailing edge of part, glue is there is it just stuck to panel. Not sure why ...

    Re: 3mm PVC adhesion---trailing edge
    A message posted at WOODWEB's Adhesives Forum (2/2) -- You may need to check the pressure on your pressure rollers- this is a tip I got from a Rehau ...

    Glue that becomes adhesive with moisture
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Hi, I am new to this forum. I am working on a project. I need to find either an adhesive that ...

    Re: polyurethane glue spreaders
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Hi Jim. I´m missing some important parameters. 1.Kind of material 2.Thickness 3.Is there a con ...

    Re: polyurethane glue spreaders
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Hi Jim. Thanks for the parameters.But you have to consider usage and payback - PUR requires an ...

    Re: polyurethane glue spreaders
    A message posted at WOODWEB's Adhesives Forum (2/2) -- Material- Sitka Spruce Laminations 2-3mm thick Lam width- 3.5" LAm lengths- 12" to 5 ...

    Re: glue/ cracking
    A message posted at WOODWEB's Adhesives Forum (1/2) -- Agreed with the above. Also, if it's a hardwood table top itself that's moving/cracking, you w ...

    Re: Plastic Laminate adhesive
    A message posted at WOODWEB's Adhesives Forum (1/2) -- If you're just doing one single top, you can actually just use spray cans of 3M 90-Hi Strength ...

    Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/2) -- I've been asked to build some wood caddy boxes 13x7x4 approx. They want them out of 1/4" ...

    adhesive for thermally modified hardwood like Cambia
    A message posted at WOODWEB's Adhesives Forum (12/1/22) -- A fellow woodworker says that since thermally modified hardwood does not absorb moisture, ...

    Re: adhesive for thermally modified hardwood like Cambia
    A message posted at WOODWEB's Adhesives Forum (12/1/22) -- I have successfully glued with type 2 pva such as Titebond 2 and urethane glue. Thermally ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/1) -- Epoxy On yachts we use typical West System epoxy to bond down 1/4” teak decks to composite de ...

    Seeking adhesive suggestion
    A message posted at WOODWEB's Adhesives Forum (12/1) -- I want to attach a couple of labels to a thing I'm making. I'm engraving the labels out of .0 ...

    Re: Seeking adhesive suggestion
    A message posted at WOODWEB's Adhesives Forum (12/1) -- 3M #930xxLE used extensively in automotive markets. xx thickness in 0.xx mm eg: 93010LE 0.10 ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/1) -- Great information everyone, I have never used an epoxy adhesive for this type of application, ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/1) -- Does epoxy peel off vacuum bags easily on cured? What precautions do you take when you veneer ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/1) -- Same song I've been singing for years but new wording. It is prompted by two new users of epo ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/1) -- Hmmmmmmmm....A lesson learned lately Dr? ...

    Re: Can I Glue a Finished Surface
    A message posted at WOODWEB's Adhesives Forum (10/1) -- Here is what will happen...you will glue the one piece onto the other, but the piece with the ...

    Re: Flammable Contact Cement & OSHA Ristrictions
    A message posted at WOODWEB's Adhesives Forum (10/1) -- We long ago switched to water borne contact. It works well. Not an issue with any of the juri ...

    Re: coloring epoxy
    A message posted at WOODWEB's Adhesives Forum (10/1) -- Mixol usually but I have even used black spray paint in a pinch ...

    Re: What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (10/1) -- cow glue ...

    Re: Tite bond
    A message posted at WOODWEB's Adhesives Forum (9/1) -- Hey Scott. Does it look normal? A common problem with water based items is they separate. You ...

    Re: Adhesive to help PSA disc
    A message posted at WOODWEB's Adhesives Forum (9/1) -- i switched to hook and loop. Saves the agravation that you are going through. ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (9/1) -- We pre heat our laminate edges with a heated table at the bander. Try it as it will stick then ...

    Re: Glue up Techniques Needed
    A message posted at WOODWEB's Adhesives Forum (8/1) -- Biscuits for alignment and stability. Then pipe clamps on the long run and squeeze clamps on t ...

    PVC edging falling off
    A message posted at WOODWEB's Adhesives Forum (8/1) -- We are having issues with 3mm PVC edges falling off after they have been in the field for over ...

    Re: Automatic Door Bottoms
    A message posted at WOODWEB's Adhesives Forum (7/1) -- The only ones I have ever used are from Conservation Technology. http://www.conservationtechno ...

    Re: Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (7/1) -- I've seen this done once or twice. One company I know of was making laminated chair backs by s ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (7/1) -- The Gorilla Glue will likely work best, even better if you scuff the metal with 40 grit sandpa ...

    aluminum to styrofoam bonding
    A message posted at WOODWEB's Adhesives Forum (6/1) -- Can someone direct me to the correct adhesive to use. I am wanting to sandwich bond thin sheet ...

    Re: Project Shipping to Costa Rica
    A message posted at WOODWEB's Adhesives Forum (6/1) -- General information regarding acclimation, bonding, and conditions is attached in reference to ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (5/1) -- Bill, It does seem strange that you're having this problem now, but never with your other supp ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (5/1) -- Chris, I already have 2 of them and they work great. It's the bulk glue we're talking about be ...

    Re: Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (5/1) -- PVA in a Cold Press. ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (4/1/23) -- I agree 180 is too cold. We used unfilled for a while and went back to filled. Im not sure ...

    Re: Edgebander Glue Roller Problem
    A message posted at WOODWEB's Adhesives Forum (4/1/23) -- Another thought is there a gap in the gate? Is it one continuous edge that restricts the gl ...

    Re: epoxy glue for solid edge plywood
    A message posted at WOODWEB's Adhesives Forum (4/1) -- Epoxy would be my last choice! For small volume production using curved culls with only two cl ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (4/1) -- concrete abutments with PT lumber between beams and concrete. Roofing paper under upper deck t ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (4/1) -- I wouldn't have a liability insurance policy big enough to cover a job like that. Heck, the co ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (3/1/23) -- We prime with glue sizing. Works so far. ...

    I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/1) -- I'm making my own flooring using 3/16" thick maple veneers. They are about 4 to 6" i ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/1) -- Trying to save money and just sort of curious about the outcome. Also, I hate a lot of the pre ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/1) -- Are you desparate to use the material? Is it of historic importance to you? Or are you trying ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/1) -- Ok, how about vacuum press it onto 1/2" ply first? But would rather not go there. ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (3/1) -- OSB, wood veneer, water based glue, and pin nails? Your sunk ...

    Re: glue squeeze out
    A message posted at WOODWEB's Adhesives Forum (2/1) -- Ideally, I clamp it up and when the glue turns gel like (after 15-45 min. Depending on temp.)i ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (1/1) -- Thank you both Mark and Matt for your responses. The table in question is 16 feet long. I have ...

    Re: Banding
    A message posted at WOODWEB's Adhesives Forum (1/1) -- Now you've got me wondering if we should be priming the 1.6mm also?? That would be a PIA. We a ...

      ---   Return to Top   ---