• Product Directory Search Results: 10
  • Knowledge Base Search Results: 567
  • Forum Messages Search Results: 701
  • Machinery Exchange Search Results: 670
  • Job Opportunities and Services Exchange Search Results: 4
  • Classified Ads Exchange Search Results: 1
  • Project Gallery Search Results: 4
  • Shop Gallery Search Results: 43
  • Shop Built Equipment Gallery Search Results: 3
  • Sawmill Gallery Search Results: 16
  • Sawing and Drying Directory Search Results: 1
  • Your search for moulder found 2275 documents (of 103725 searched).
    1-2275 of the 2275 results are displayed below. 2275 results indicates you likely need to narrow your search by choosing a specific area from the drop down list, or using more specific search term(s). To view the additional results not shown on this page Click the "More Matches" link found at the end of each category.
      

    Product Directory Results:

    American National Knife
    Manufacturer of HSS and Carbide Tipped Woodworking Knife Sets for Planers, Jointers, Molders, Shapers

    Colonial Saw
    North American Supplier of Striebig Panel Saws, Lamello Specialty Tools and a Wide Range of Saw and Tool Grinding Machinery

    Doucet Machineries Inc.
    Designer, Manufacturer and Integrator of Machinery for the Secondary Wood Processing Industry

    EX-FACTORY INC.
    Offering New & Used Woodworking Machinery including Auctions & Liquidations

    MARTIN Woodworking Machines Corp.
    Quality Woodworking Machinery Engineered and Manufactured in Germany

    Rose Machinery
    Horizontal Band Re-rips, Standard & Custom Designed Machinery

    Simantech
    New & Used Machinery, Supplies, Tooling, Parts, and Abrasive Products

    Southeast Tool, Inc.
    High Quality Tooling at Competitive Pricing

    Vexor Custom Woodworking Tools, Inc.
    Custom and Standard Router Bits, Shaper Cutters, Profile Knives, Multi Profile Insert Tooling and More

    Weinig Group-USA
    Wood Moulders and Knife Grinding Equipment

      ---   Return to Top   ---     


    Knowledge Base Results:

    Choosing a moulder
    Jointed- vs. non-jointed-head moulders; choosing the right machine for a custom moulding business. November 21, 2000

    Troubleshooting Chatter And Snipe
    Is it a knife grinding issue or a moulder set-up problem? April 10, 2005

    Four-Side Planer Versus Moulder
    A discussion of the relative capabilities of four-side moulders and planers for straightening, smoothing, and cutting profiles. May 12, 2005

    Home-built moulder
    Advice on the construction of a moulder, and encouragement to follow an easier path. November 18, 2002

    Finish and Feed Rates
    Setup and operation tips for moulder operators. June 22, 2007

    Jointed Moulders Explained
    Here's the rundown on what makes a jointed moulder different from a regular moulder, how it works, and what it's good for. October 4, 2007

    Are Small Moulders Practical for Small Runs?
    Here's an extensive and informative run on the hows and whys of buying and using a small moulder to make short runs of custom profiles. October 19, 2013

    Production Tips, part two
    Part two of three from Woodworking International Magazine, offering proven ideas for increasing efficiency in production shops. 1998.

    Radius Moulding Machinery Choices
    Millwork pros discuss shopping for a radius moulder and the related knives. January 9, 2008

    Limitations of a Five-Head Moulder
    For deep cuts in heavy profiles, a six-head moulder offers better capacity than a five-head unit. May 3, 2011

    Streamlining Moulder Set-Ups
    Shop owners discuss ways to make moulder set-up and changeover smoother and more efficient. August 21, 2006

    Moulder Purchasing Advice
    A woodworker going into the moulding business gets advice on moulder choices and related issues. December 26, 2007

    Grinding Your Own Moulder Knives
    Here's a long, rich thread covering many aspects of moulder knife grinding. October 2, 2005

    Multiple Dowel Moulders
    Dedicated machinery to make more than one dowel at a time is an unusual application. Here's a detailed thread on the ins and outs of it. July 3, 2008

    Training for a Moulder Operator
    Hands-on professional training is vital for anyone setting out to operate ond of these complicated and powerful machines. May 12, 2005

    Moulder Fence Adjustment Issues
    Woodworkers troubleshoot a problem with wood drifting away from a moulder's fence during operation. February 10, 2009

    Mounting a Sawblade on a Moulder
    It's a workable way to make multiple moldings at one pass, but it calls for special safety accessories. March 3, 2006

    Moulders
    Basic info on moulders. November 12, 2008

    4-Head or 5-Head Moulder?
    A 5-head or even a 6-head moulder is more versatile and produces better quality. November 8, 2007

    Ways to Machine Radiused Casings
    Woodworkers discuss various methods of making curved mouldings, including CNC and moulder techniques as well as ways to join segments. December 2, 2006

    Troubleshooting Out-of-Square Moulders
    Follow the saga of a woodworker trying to solve the puzzle of not one, but two, out-of-square moulders on the shop floor. April 30, 2009

    Is It Worth It to Buy a Moulder?
    A small shop owner gets advice on whether investing in a moulder would pencil out for his operation. October 28, 2014

    Moulder Tweaks and Modifications
    A post on stabilizing the open end of a moulder turns into a long thread on shop-rigged moulder modifications. April 30, 2009

    Better moulder finish quality
    Eliminating snipe on mouldings. August 13, 2002

    Troubleshooting Moulder Head Vibration
    Many things could potentially throw a moulder head out of balance. Here, pros discuss the possible causes of excessive vibration. August 23, 2005

    Moulder Blade Sharpening and Touch-Up Tips
    Here's extensive advice about moulder knife sharpening and touch-up and other issues that can affect knife edge quality and moulding appearance. October 18, 2011

    Shaper and Moulder Choices
    Observations on the relative capabilities of shapers and moulders. January 9, 2006

    Axial Constant Grinding: Is It Worth It?
    A discussion on the costs and benefits of switching to an axial constant system on moulder and shaper knives. August 18, 2009

    Tooling a Moulder for Kerfing Jamb Stock
    Can a saw blade or dado blade be adapted for use on a moulder to cut 1/8-inch kerfs? August 18, 2009

    High-speed jointing head moulders
    Are these machines practical for a custom moulding business? June 13, 2001

    Getting Into Flooring Production
    The owner of a rough lumber business has been getting a lot of requests for hardwood flooring. Here's a discussion of what equipment he would need to start producing it, and what markets he should cultivate in order to make money. November 13, 2005

    Troubleshooting Moulder Tearout
    Pros help a shop owner figure out the problem with his moulder. October 8, 2005

    Improving Moulder Efficiency
    Two guys have their hands full trying to satisfy a busy shop's moulding needs. Here, they get some advice on how to streamline their operation. March 29, 2006

    Moulder Options for the Small Shop
    Pros discuss the cost-effectiveness and convenience of various moulders, singly or in combination. November 9, 2005

    Four-Head Moulder Setup
    Setting up a 4-head moulder to run flooring and mouldings. October 2, 2010

    Rip saw and moulder methods
    Using a ripsaw and moulder to machine solid wood panels. July 24, 2001

    Cutterhead balance
    Solving the problem of a vibrating planer/moulder. January 16, 2002

    Start-Up Manufacturing Millwork
    It's harder than a beginner might think to make money producing mouldings on a shoestring. Old hands discuss the hard truths in this thread. April 4, 2011

    Moulder chatter
    Moulder operators help troubleshoot the problem. January 16, 2002

    Tooling Up with Your First Moulder
    A woodworker gets advice on accessories to go along with his first moulder purchase. October 4, 2007

    Moulder Operator Skills and Pay
    Feedback on the going rate for moulder operators in different parts of the country, and thoughts on how to earn at the top of the scale. December 30, 2007

    Corrugated Knife Stock for Shapers and Moulders
    Corrugated steel knives can be swapped between a moulder and a shaper. October 2, 2007

    Setting up a new moulder operation
    Thoughts on setting up a moulding operation in an established architectural millwork shop. June 14, 2000

    More Thoughts on Grinding Moulder Knives
    Pros add to an earlier discussion about whether, when, and how to grind your own knives. October 2, 2005

    Tooling Up to Run Mouldings
    Pros give advice on how to choose and use equipment for producing mouldings.

    Keeping Wood Tight to the Moulder Fence
    Advice on moulder setup to keep wide stock from drifting away from the fence during operation. December 27, 2008

    Tooling Considerations with a Moulder Upgrade
    Shop owners and experts discuss the tooling costs and choices relating to a new moulder purchase. June 23, 2006

    Troubleshooting Moulder Jams
    Strategies for dealing with the problem when boards get stuck in the moulder. April 24, 2009

    Will a Boost Fan Step Up Dust Collector Capacity?
    A woodworker adds a new piece of equipment, and wants to know whether adding a boost fan will enable his existing dust collection system to handle the increased requirement. April 17, 2009

    Moulder Feed Problems 3: Caused by Tooling
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Aligning an Older-Model 4-Head Push Through Moulder
    It's hard to eliminate snipe on some older moulders. Here, experts supply some tips. April 19, 2006

    Fabricating Radius and Curved Mouldings
    Here's a detailed discussion comparing two approaches to creating curved and arched mouldings: the CNC route, or the dedicated moulder and shaper setup (which may involve templates). July 13, 2010

    Choosing a Moulder
    Big industrial iron will outwork smaller machinery, but you need dust and chip collection to match. February 15, 2009

    How Much Over-Width Should Stock Be Ripped?
    A discussion of ripping precision, straight-line ripsaw performance, and how much extra width to allow in order to compensate for wood movement. January 8, 2010

    Moulder Feed Problems 1: Caused by Machine
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Lubricating and Protecting Shaper and Moulder Beds
    Product choices to reduce friction and rust in a moulder or planer. July 12, 2013

    Mounting a Ripsaw Blade on a Four-Head Moulder
    Some moulders are set up to allow ripping, but there are safety issues to consider. March 31, 2008

    Flooring Equipment
    Basic descriptions of moulders and end-matchers used to make wood flooring. November 11, 2008

    Moulder Feed Problems 2: Caused by Material
    A problem-solution checklist chart for correcting moulder feed problems. November 27, 2006

    Setting Up a Six-Head Moulder with a Jointer-Style Infeed
    Setup tips for proper flattening results with a six-head moulder with jointed infeed. June 9, 2007

    Proper Grinding and Maintenance -- Will Increase Moulder Tool Life
    Good grinding and maintenance help increase moulder life. February 23, 2001

    Phase Converter, Transformer, and Controller Issues with a Big Moulder
    Troubleshooting power conversion and startup problems with a complicated electrical arrangement. January 25, 2010

    Balancing moulder heads
    A discussion about out-of-balance knives in a moulder/planer. June 13, 2001

    Modifying a Moulder to Run a Deep Profile
    Trying to push a moulder to perform outside the limits of its original design can result in serious injury. January 29, 2009

    Running Tight Radius Trim on a Moulder
    Short-radius curved mouldings are tricky to run on a moulder (a CNC or lathe works better). It can be done, though — here are photos and advice. May 17, 2011

    Jigs for Elliptical Moulder Work
    Aftermarket jigs let you do complex curved work on the moulder, especially if given additional shop modifications. May 21, 2007

    Flattening Lumber with a Power Feeder On the Jointer
    Thoughts about jointer and moulder set-up and feeding technique for flattening lumber. August 31, 2009

    Whether to Make Your Own Moulder Knives
    Info on how to grind moulder knives, and thoughts on whether it's worth the time and cost to do so. December 30, 2007

    Using jointing attachment on moulder
    Proper methods for jointing knives on a moulder, and myths concerning their sharpening. February 28, 2001

    Tuning Up a Small Moulder
    Advice on getting the best finish possible from a small moulder. May 21, 2009

    Gang Ripping on a Moulder
    Tips for making short work of multiple rips. February 27, 2005

    Running Dowels on a Moulder
    A discussion of moulder set-up for dowel machining, and on improving the tolerances of the finished product. December 6, 2009

    Climb Cutting with a Moulder
    A shop owner considers the pros and cons of climb-cutting cedar and redwood on a moulder. May 28, 2006

    Moving Beyond Drying
    A small drying operation wants to invest in planing, jointing, and ripping. March 18, 2005

    Running Synthetic Trim Materials Through a Moulder
    Advice on running plastic trim stock through a moulder. July 28, 2006

    Troubleshooting a Noisy Moulder
    Experts chip in to help diagnose a moulder that makes a growling sound for mysterious reasons. October 4, 2007

    Tooling for a Five-Head Moulder
    Advice on spiral cutterheads for quick, clean production of S4S stock. August 31, 2009

    Moulding Quality Issues
    A batch of mouldings with quality problems sets off a discussion of proper dimensions, back-relief, and surface smoothness for base, casing, and jamb stock. December 15, 2005

    Anyone Make Stop Flutes On Their Moulder?
    10/31/2014

    Eliminating Snipe on Mouldings
    Looking for the cause of moulder snipe, an operator finds his solution in a custom-fabricated chipbreaker. March 13, 2007

    Setup Tips for a Small Moulder
    Tips on depth of cut, and on supporting the open side of the moulder to reduce chatter. September 30, 2010

    Floor Structure and Moulder Chatter
    An understrength floor system beneath a piece of heavy woodworking equipment is a recipe for trouble. February 4, 2011

    Snipe Problems on a Through Feed Moulder 2: Top Snipes
    Checklist table of problems and solutions for moulder operators. December 1, 2006

    Jigs for a Moulder
    Examples of jigs and rigs that can help you run custom crown moulding on your moulder. April 21, 2011

    S4S Moulder: Is It Worth It?
    A shop owner is considering buying a 4-head moulder to dedicate to producing S4S stock. Opinions vary on the value of that investment — the difference may lie in the quantity he needs to produce. October 22, 2005

    Snipe Problems on a Through Feed Moulder 4: Right Side Snipes
    A troubleshooting checklist table for moulder operators. December 1, 2006

    Running a Moulder with One Sharp Knife and a Balancer
    One knife on a moulder head can do all the cutting, but it's a tricky arrangement to set up right. November 12, 2008

    Can I Run Corrugated Knives in a Flat-Knife Moulder Head?
    Don't run moulders using knives that aren't designed for that moulder. It's unsafe. February 27, 2007

    Custom pressure shoes for moulders
    A discussion of home-made and custom-ordered pressure shoes for special profiles. August 12, 2001

    Reducing Tearout in Fir
    A handful of expert tips on reducing tearout on problematic wood in a moulder or shaper. January 28, 2014

    Architectural mouldings on CNC routers
    A discussion of the ins and outs of producing architectural mouldings on CNC routers. June 14, 2000

    Troubleshooting Moulder Head Movement
    Pros help figure out the problem with a moulder's top head. September 28, 2006

    Troubleshooting Feed Problems with a Four-Head Moulder
    Woodworkers offer suggestions about what could be causing the feed system to stick on a four-head moulder. January 17, 2011

    Troubleshooting Moulder Tear-Out
    Tweaks to the knives, the feed rate, the drive belt set-up, or the bed board may help eliminate moulder chatter and tear-out. August 29, 2005

    Straight-line vs. gang rip
    Which is better suited to this moderate operation? June 24, 2002

    Is Making Custom Moulding a Viable Business?
    Can you make money doing short runs of custom mouldings? Experienced shop owners share business tips. March 26, 2009

    What's Involved in Starting Up a Moulding Supply Business?
    Here are some business issues to think about if you're considering starting to both manufacture and install large volumes of custom trim. April 20, 2007

    Creating templates for moulder knives
    Thoughts on producing templates for cutting moulder knives. June 14, 2000

    Troubleshooting Finish Problems on the Through Feed Moulder
    Checklist table of problems and solutions for moulder operators. December 1, 2006

    Shopping for a Planer Moulder
    A woodworker gets advice on equipment for producing S4S stock in the shop. April 18, 2015

    Knife Characteristics for Best Moulder Finish Quality
    This informative thread includes some expert discussion of the old-school method of back-beveling cutter knives, and also describes other knife characteristics that can improve the quality of machined wood straight off the moulder. August 13, 2014

    Open or Sealed Bearings?
    A shop owner struggles with a decision about after-market bearings for an older Italian moulder. March 4, 2009

    Increasing moulder knife life
    Increasing length of runs between sharpenings. March 21, 2002

    Face Glue-Up Techniques for Making Turning Blanks
    Woodworkers discuss the face preparation and gluing issues involved in making large blanks for turning. January 9, 2008

    Snipe Problems on a Through Feed Moulder 3: Left Side Snipes
    A troubleshooting checklist table for moulder operators. December 1, 2006

    Snipe Problems on a Through Feed Moulder 1: Bottom Snipes
    Checklist table of problems and solutions for moulder operators. December 1, 2006

    Leveling the Feed Beam on a Moulder
    Detailed discussion of some maintenance and adjustment issues with a nine-inch moulder. April 4, 2011

    Knife Sharpening Frequency
    How many times can you sharpen moulder knives, and how do you know when it's time to do it? January 9, 2008

    Chip-out from a year-old moulder
    The moulder had worked perfectly for a year when all of a sudden, chip-out reared its ugly face. June 14, 2000

    Single-Blade Moulder
    Advice on running a moulder with just one knife, for the sake of economy on short custom runs. February 12, 2009

    Improving Rough Mill Yield at the Moulder
    Attention to the typical causes of material loss in the moulder can improve the moulding producer's bottom line. June 21, 2007

    Planing Warp out of Wood Flooring Stock
    It requires hand labor, but you can use a moulder to straighten warped stock — up to a point.June 28, 2013

    Belt Tension on Moulder
    Pros troubleshoot a belt-slippage problem during a new moulder's break-in period. August 31, 2005

    Pricing Moulder Services
    How to charge for machining someone else's material. January 13, 2006

    Saws and Techniques For Cutting Moulder Knife Steel
    Advice on choosing and using equipment for cutting off moulder and planer knife blanks. October 1, 2010

    Five-piece doors on CNC
    Doing raised-panel work on a CNC router. November 26, 2001

    Four Dust Collection Zones, or One Big Unit?
    For a large new shop, is it smarter to install one central dust collection system or a set of smaller independent systems? January 14, 2008

    Entry Level Equipment for Making Mouldings
    A woodworker ponders what to buy for a first foray into producing small runs of custom mouldings. February 10, 2009

    Whether to Mill Your Own Cabinet Mouldings
    Is it practical for a cabinetmaker to mill his own mouldings? Shop owners say that depending on your situation, investing in a moulder might be worth it. July 29, 2007

    Equipment Investment for High-Volume Wood Flooring Production
    What's the capital investment to produce tongue-and-groove wood flooring in a serious way? And is it worth it, when outsourcing instead is a practical option? April 21, 2008

    Weinig Moulder Help
    10/26/2013

    Running Baseboard and Casing in One Pass
    Can you run baseboard moulding or casing on a four-head moulder, using the first knife to create the necessary back-relief? October 14, 2006

    Moulder Motor Upgrade Options
    Advice on swapping up to a higher-horsepower motor, and other modifications to add muscle to your moulder. May 24, 2010

    Glue Joint Prep and Bond Performance
    More advice on creating good wood surfaces for glue joints. December 21, 2010

    S4S Planing Equipment for a Small Shop
    Shopping for a four-head moulder that's practical for dressing lumber in a small shop. October 4, 2011

    Making Beadboard Door Panels for One Job
    Suggestions for how to make a small amount of beadboard for a custom cabinet door project. May 6, 2010

    Measuring Hook Angle on Moulder Heads
    Here's a primer on how to measure the hook angle on a moulder head. September 28, 2006

    Tweaking the Feed Rollers on a Moulder
    Woodworkers suggest reasons wood might get stuck going through the moulder, and suggest ways to fix the problem. December 6, 2006

    Snipe Problem with a Four-Head Moulder
    A mis-adjusted upper pressure bar is probably the source of trouble in this sniping story. November 18, 2006

    Jointing moulder knives
    How to get good results when jointing straight knives. January 31, 2001

    Troubleshooting Side Tear-Out on a Five-Head Moulder
    Tips on preventing tear-out in a moulder. January 2, 2012

    Is Moulder Knife Steel Sharp from the Factory?
    Moulder knife blanks need to be sharpened and balanced before use. February 1, 2015

    Modifying the Pressure Shoes for a Five-Head Moulder
    Suggested modifications to give your moulder's hold-down shoe more versatility. September 17, 2008

    Moulder Maintenance in a Dusty Shop
    Advice on a lubrication and cleaning routine for a moulder in a shop with inadequate dust collection. January 29, 2009

    Knife Weight Balancing Tolerances and Scale Choices
    Paired knives on a moulder should weigh within a tenth of a gram of each other. Here's advice on measuring and achieving that. October 19, 2013

    Storing Moulder Knives
    Shop owners trade ideas for keeping track of all those moulder knives. December 26, 2006

    Recovering from a Bad Stain Job on Poplar
    When a large batch of poplar mouldings is stained way too dark, you have only a few practical options for fixing things. December 29, 2008

    Collecting Shavings from a Cyclone
    Here's a long, detailed thread developed as a woodworker tries to create a system to collect shavings from the bottom of a cyclone and store them in a large bin.September 3, 2011

    Evaluating Industrial Shapers
    Woodworkers discuss the characteristics that define quality in a heavy-duty industrial shaper. April 30, 2006

    Freeing a Welded (Spun) Head
    Here's a long and detailed thread about the various approaches that may work when a cutterhead has been welded to a spindle. February 15, 2009

    Equipment Choices for Door Fabrication
    What kind of shop equipment will speed up door production, for a reasonable cost? November 13, 2009

    Choosing a Moulder and Shaper Knife Grinder
    Advice on how to get into knife grinding for your own shop. August 31, 2010

    Choosing Dust Collection for a New Building
    A somewhat rambling conversation about what's involved in designing a new dust collection system. June 15, 2014

    Compression and Chatter
    Pros discuss the meaning and causes of "compression" and "chatter" in moulder operation. October 4, 2005

    Moulder Tearout Problems with Hickory
    Hickory is notoriously difficult to machine. Here's a discussion on how to deal with tearout while making hickory crown moulding. February 19, 2006

    Rip-Saw and Moulder Maintenance
    A moulding shop owner gets advice on rehab for some machines that have done some hard living. January 12, 2009

    Climb Cutting on a Moulder
    Molding manufacturers discuss the potentially dangerous but sometimes necessary practice of climb cutting. January 22, 2006

    Cutterhead Options for a Five-Head Moulder
    Shop owners who machine S4S mouldings discuss the relative merits of carbide versus high-speed steel knives, and 2-sided versus insert cutter heads. September 15, 2006

    Older Moulder Spindle Alignment Problems
    Expert advice on finding the reasons for a moulder spindle going out of alignment with the table. December 9, 2010

    Troubleshooting "Chip Beat" with a Small Moulder
    Small dents in the finished moulding are a well-known issue, caused by chips and typically related to ineffective dust collection. October 27, 2013

    Clogged Dust Collector Lines on a 5-Head Moulder
    When dust collection lines plug up, the problem could be vacuum, wood moisture content, or other factors. April 10, 2007

    Matching Old Moulding Profiles
    Advice on how to get custom moulder knives for reproducing historic old trim profiles. July 30, 2009

    Tolerance For Knife Stock Thickness
    A discussion of thickness variations in moulder and planer knife blank material, and the attendant problems for custom-ground knives. April 27, 2007

    Milling Reclaimed Heart Pine Lumber
    Advice on knives, cleanup, safety, and more, for an operation to mill resawn old pine timbers into mouldings. December 15, 2005

    Increasing RPMs and Feed Speed on a Jointer Moulder
    In theory, upping the RPMs and feed speeds at the same time will allow faster production with the same number of knife marks per inch. However, there are a few practical cautions to keep in mind. February 27, 2007

    Moulder and Shaper Setup for Curved Work
    Wrestling with the issues of machining complex curved stair-rail parts. May 11, 2011

    Working with Resawn Moulding Blanks
    Careful resawing can economize on material, but it can also introduce stress-related movement of the stock. September 17, 2012

    Keeping Tally of Moulding Runs
    Moulding manufacturers discuss efficient systems to keep track of moulding production (including tracking defective and rejected pieces). September 3, 2005

    Moulder set-up
    Basic guidelines for setting controls. October 24, 2001

    Five-Head Moulder Setup
    Detailed advice on calibrating and aligning the chipbreaker, pressure shoe, and other key components of a five-head moulder. April 21, 2011

    Moulder Spindle Runout Tolerances
    Some advice on acceptable precision in a moulder spindle. April 18, 2015

    ATS Measuring Stand Repair
    Tips on repairing or replacing the caliper device on a moulder'smachining, accuracy, set-up, milling, cutting, shaping, joints, joinery, cutters, heads, knives, sharpening, automatic tool-setting stand. May 13, 2005

    Hook Angles for Hardwood and Softwood
    Moulder pros discuss the reasons to prefer a 12° or a 20° hook angle in different situations, for minimizing tearout, getting a good finish, and maximizing tool life. May 28, 2008

    Importing Machinery
    A woodshop owner takes a chance on importing his own machinery straight from Asia, takes a chance, and reports back on the results. August 19, 2008

    Cutting Flutes in Pilasters
    Advice on using a table saw or router to make fluted woodwork. January 13, 2009

    Gearing Up to Make Tongue and Groove Boards
    What's the best way to equip yourself to machine T&G decking and planking (on a budget)? September 17, 2008

    Machining Humongous Crown
    Thoughts on the problematic practicalities of milling and installing 16-inch-wide crown moulding. September 19, 2009

    Charging for Short Runs of Custom Moulding
    Thoughts on how to price custom short moulder runs when the customer supplies the rough stock. June 24, 2007

    Fine-Tuning a Small Moulder
    Less expensive equipment may need more attention to perform up to snuff. Here are some detailed tips on "tweaking" the machinery. October 14, 2006

    Door and Window Building: CNC Versus Traditional Machinery
    Here's a thoughtful and sophisticated conversation about the proper place of CNC equipment and traditional shapers, mortisers, etc., in custom door and window production. October 3, 2011

    Custom Architectural Woodwork on the CNC
    A request for ideas for making some custom quarter-round mouldings turns into an extended discussion of custom techniques and the value of hand labor versus computerized production. February 19, 2008

    Recycled barn wood
    Processing and marketing reclaimed lumber. September 23, 2003

    Sharpness of High Speed Steel Versus Carbide Tooling
    Here's a long, technically detailed, and authoritative thread that explains why high speed steel can be sharpened to a finer edge than carbide, but will lose that edge quickly in hard or abrasive materials. (And more.) February 22, 2011

    Setting Up a Six-Head Moulder for Machining Tall Baseboard
    Here's a detailed discussion of how to arrange the top knives for cutting of the flat and the profiled part of tall, highly detailed baseboard mouldings. March 31, 2008

    Shopping for a Jointer
    Woodworkers discuss desirable characteristics to consider when considering a jointer purchase. May 21, 2009

    Lubricating a Jointer or Planer Bed
    Wax or a specialty lubricant can improve the performance of a jointer or planer. July 11, 2013

    Troubleshooting Nicks in Moulder Knives
    Newly ground knives can be damaged right away by hard mineral deposits within some hardwoods. Here's advice on knife material choices that could help avoid the problem. June 11, 2010

    Milling Flooring from Old Barn Boards
    With carbide moulder blades, it's no big deal — but check carefully for nails. May 13, 2005

    Glue-Line Ripping Versus Ripping for Moulder Blanks
    Thoughts on the equipment and technique required for smooth accurate glue-line cuts, as opposed to rough cuts that require further dressing before use. February 16, 2014

    Entry-Level Tooling for Moulding Manufacture
    A finish carpenter and cabinetmaker/installer gets advice on the gear he needs to make his own mouldings (and stock for sale). February 15, 2015

    Hardened or Coated-Steel Knife Material
    Use and value considerations of plasma-coated or hardened cutters. August 30, 2007

    Machining a Three-Quarter-Round Door Sticking
    This complex door frame profile is best tackled using a five-head moulder. August 27, 2013

    Avoiding Tear-Out with Very Small Mouldings
    Thin stock chatters going through the moulder or shaper, which can cause major tear-out. Here's advice on ways to overcome the problem. March 4, 2009

    Should I Make My Own Crown Moulding?
    Is it worth investing in a moulder for the convenience of making your own crown moulding sometimes? April 20, 2008

    Stock Moulding Start-Up Tips
    A millwork installer moving into moulding manufacturing gets advice on running his new business. June 23, 2006

    Re-Sawing Machinery Options
    What's the best equipment for re-sawing flat stock to make mouldings? September 17, 2008

    Cutterheads 101
    Basic considerations for knife selection and machine adjustment and operation. February 14, 2007

    Making Shoe Moulding with a Shaper
    Thoughts on running small volumes of shoe moulding with a low-end setup. February 24, 2008

    Tooling for Double End Tenoner
    Cutterheads from some other equipment can be used with a double end tenoner. December 11, 2006

    Rabbeting Knives for a Moulder
    Tooling suggestions to enable clean rabbet cuts, without burn marks on the shoulders. March 3, 2006

    Grinding Moulder Knives with a CNC
    Good info on the advantages and limitations of CNC-based knife-grinding setups. October 3, 2009

    Running Resawn Moulding
    Tips on resawing wood and running it through the moulder. April 27, 2007

    Machining Alder on a Moulder
    Characteristics of Alder that affect its machinability and performance. April 30, 2009

    Choosing tooling for MDF moulding
    Using carbide tooling on MDF in planer/moulder machines. November 21, 2000

    Building Beaded Face Frames
    Making beadmould application more efficient. January 14, 2004

    Preventing Rust When Milling Wet Material
    A discussion of lubricants and cleaners for preventing rust on machinery. August 14, 2007

    Profiling Fir
    Slower feed rates, sharper tools, multi-edge cutterheads, and very cautious climb-cutting can reduce the tearout and splintering that are common problems when profiling Doug Fir. October 4, 2011

    Pads for Moulder Pressure Shoes
    Felt pads can prevent shine marks on your mouldings. Details here. July 3, 2008

    Brett Wood Species that Require Carbide Tooling
    Some wood species will destroy high-speed steel tooling. Here's a partial list. March 16, 2015

    Preventing Pine-Sap Buildup
    Pine sap is building up on the bed and rollers of his moulder, reports a shop owner who's milling up large batches of flooring from reclaimed pine. Others supply advice for cleanup and prevention. October 20, 2005

    Buying Premade Moulder Blanks Versus Ripping Your Own
    Purchasing pre-ripped stock for moulding manufacture has its advantages and disadvantages. November 19, 2005

    How to Size a Phase Converter
    This discussion of phase converter sizing includes a brief, clear description of how phase converters work. April 21, 2011

    Milling Wood Flooring on a Shaper
    Extensive advice on how to make hardwood strip flooring on a cabinet-shop shaper. April 19, 2006

    Gauging Moulder Belt Tension
    Tips on how to set and maintain proper belt tension. October 30, 2005

    Rounding Over Corners on Blocks (Mass Production)
    Woodworkers brainstorm in search of a high-volume, high-accuracy production method for a repetitive task of rounding over corners on small hardwood blocks. September 15, 2011

    What's your Favorite Machine?
    Woodworkers chime in about the equipment they love. May 26, 2010

    Troubleshooting problems when moulding MDF
    A detailed discussion of challenges in getting a smooth finish when putting profiles on MDF material. February 13, 2001

    Raised-Panel Wainscoting for a Spiral Stairwell
    true frame-and-panel wainscoting with concave panels rising up a spiral staircase. Woodweb's top trimwork minds chime in on this one for a top-flight discussion of a very tricky topic. July 9, 2007

    Elliptical Moulding Jigs and Tricks
    Simple curves are hard: elliptical shapes require a high degree of skill and experience. Here's a long discussion with photos from some seasoned old hands. April 12, 2013

    Expanding a Part-Time Screen-Door Business
    Here are some detailed tips on finances, sales, equipment, and job management for a woodworker who's looking to expand a small side business making screen doors into a full-time operation. October 19, 2011

    Quirk Bead Cutters
    An extended discussion on cutterheads for making quirk bead, plus equipment choices and setups for this custom decorative detail. March 3, 2009

    Knife Grinding and Woodworking Manual 4 -- Excerpts Part 4
    One in a series of excerpts from the grinding manual of Charles G.G. Schmidt & Company. 1998.

    Troubleshooting Maple Moulder Tear-Out
    Too-dry lumber, dull knives, complicated grain patterns, or other maintenance and operational issues could be causing this tear-out problem with Maple wood. February 25, 2009

    Whether to Rip Your Own Stock
    Cabinet shops consider the pros and cons of setting up to gang-rip and surface stock, instead of ordering it that way from a supplier. February 12, 2009

    Cutting Steel Blanks for Custom Moulder Knives
    Recommended cutoff saws, blades, and cutting techniques for sharp, clean cuts in tool steel. December 2, 2006

    Machining Knotty Alder
    Rustic alder mouldings are in demand because of energetic marketing. But the material is extremely rough on knives, machines badly, and has a high waste factor. July 3, 2006

    Feed speed and knife life
    How the former affects the latter. January 15, 2003

    Machining Dadoes into Door Jambs
    Ideas for high-volume production methods for cutting dadoes in door side jambs to receive the header jamb. April 30, 2006

    Setting up a Combination Gang-Ripsaw/Planer/Moulder
    Detailed comments on how to get good use out of a combination machine that gang rips, planes, and makes mouldings. December 29, 2008

    Single Knife and Counterweight Setup on a Moulder
    Using just one knife rarely gives the best results. November 19, 2006

    Finger-Jointing Moulding Stock
    A discussion with pictures of using finger-jointing equipment to make long stock for running mouldings. November 19, 2008

    Equipment to Rip Flooring Blanks
    What's best, a straight-line or gang saw? Gang comes out ahead in this long discussion. October 2, 2005

    Machining crown moulding
    What's the best way to run crown moulding? May 2, 2001

    Tooling Life: Assessing Cutterheads for Replacement
    Straight-bore cutterheads can last a long time, under ideal service conditions. But here's what to look for if you're wondering whether it's time to replace one. April 21, 2011

    Raised Grain on Mouldings
    Pros chip in to help solve a problem with grain showing through a vinyl overlay applied to mouldings. November 13, 2005

    Is It Necessary to Sand Mouldings?
    Sanding equipment for your moulding operation shouldn't be needed if knives are sharp and well balanced and the machine is well set up. September 5, 2006

    Replicating a Custom Moulding Profile
    For a matching finish job, a craftsman needs fifteen feet of a non-standard moulding. Pros suggest several methods, from ordering custom moulder knives to engaging in router-and-tablesaw sculpting. November 10, 2005

    Choosing a Shaper for Tongue and Groove, Shiplap, and Flooring
    Advice on machinery for running small volumes of edge-profiled lumber. January 17, 2011

    Choosing a Power Feeder
    Advice on matching power-feeder horsepower to the intended use. July 27, 2008

    Tolerance for Moulding Dimensions
    Moulding manufacturers discuss the limits of perfection in wood machining. January 13, 2006

    Limitations of a Router Table for Making Mouldings
    Buying a second-hand shaper is a wiser choice than trying to stretch your router's capabilities too far. April 26, 2006

    Door Panel Glue-Up Workflow
    Does anyone lay up door panels in long lengths and then cut down the blanks into multiple doors? October 26, 2013

    12-Degree Versus 20-Degree Cutterheads for Poplar
    A discussion of whether to use 20° or 12° cutterhead angles for machining Poplar. January 25, 2010

    Machining Engineered Blanks
    10/24/2013

    Dowel making
    Machines and techniques used in dowel making. June 13, 2001

    Troubleshooting Snipe when Running Flooring
    Experts advise on causes and cures of moulder snipe. November 26, 2008

    Gang vs. straight line rip saws
    Cutting straight blanks efficiently. January 16, 2001

    Machining Mouldings from Flexible Stock
    Running flexible moulding stock through your machinery is doable, but problematic. October 15, 2010

    Ownership of Custom Moulder Knives
    When a customer buys a run of custom moulding, are they also buying the knives you ground to produce the moulding? March 4, 2009

    Lubricating Moulder Cutterheads for Easy Removal
    For easy on, easy off, a little dab (or spritz) of the right stuff will do you when installing and removing cutterheads. January 11, 2007

    Spiral Head Wobble
    Could be an adjustment problem, or maybe the heads are just too heavy for the machine to handle. January 27, 2008

    Working with a Planer/Sander
    A woodworker reports on his experience with a planer/sander. July 29, 2012

    Relief Cuts for the Back of Mouldings
    Advice on dimensions and moulder setup for making relief cuts on the backs of mouldings. April 21, 2011

    Tooling for Radiused Corners on S4S Lumber
    The right cutterheads can make producing eased-edge, surfaced-four-sides lumber a one-pass operation. June 9, 2007

    Feed Rollers 101
    Recommended feed roller types, feed roller maintenance, and operating tips. February 14, 2007

    Machining Problems with Red Pine and Southern Pine
    Chipped or torn grain from moulder or planer knives in Southern Pine is related to an over-dry surface. September 6, 2011

    Sharpening Equipment
    A basic description of tool sharpening equipment and its use. November 13, 2008

    Chipload Charts and Cutting Data
    Here's some useful data on machine settings to achieve the desired chipload for good performance of moulders and jointers with various types of wood and sheet goods. September 26, 2010

    Lubricating Odd-Sized Fittings
    Special grease-gun needle tips exist for lubricating fittings when you can't find the right-sized greasegun. February 25, 2009

    Iroko Wood Tearout
    This tropical hardwood (a good substitute for teak) can be tough on saw blades and moulder knives. December 1, 2005

    Usfulness of Variable Speed in a Planer-Moulder
    Single-speed equipment is okay for running very small and simple moulding, but not for anything large or complex. September 23, 2008

    Roller Hardness Decisions
    Which moulder rollers to get — hard or soft? Interesting info here on alternative sources for rollers. February 9, 2008

    Power Feeder on a Jointer
    A power feeder can't make the judgment calls of a hand operator for straightening the first face of a board, but it can boost productivity and improve safety. July 3, 2008

    Attention, Safety Practices, and Loose Nuts
    A woodworker describes how a moment's inattention damaged his machine — but luckily, not him. The tale sets off a long thread of similar stories (including one fatality) and lessons learned. November 16, 2011

    De-Nailing Antique Pine
    Advice on finding and removing the nails from reclaimed lumber before milling into flooring. April 27, 2007

    Making Arched Window Casing Trim
    Steam bending is impractical — laminating small strips into an arch shape for moulding stock is the way to go. April 24, 2009

    Should I Joint and Plane My Own Face-Frame Stock?
    It's work to get nice flush joints and consistent dimensions on cabinet face frames. Here's a discussion about whether to surface your own stock or buy pre-planed lumber. January 28, 2009

    Raised Panel Doors - Sanding and Knife Marks
    Advice on sanding and finishing issues related to moulder knife marks in raised panel door profiles. September 18, 2014

    Machining Face Frame Stock
    A cabinetmaker gets advice on improving his process for planing and dimensioning face frame material — or whether to buy pre-milled stock instead. October 12, 2007

    Knife Grinding and Woodworking Manual 5 -- Excerpts Part 5
    One in a series of excerpts from the grinding manual of Charles G.G. Schmidt & Company. 1998.

    Cabinet doors: to build or to buy?
    A roundtable on making raised-panel doors for cabinets, versus "buying them out," opening onto a discussion of the larger issues of tooling and automation. July 18, 2000

    Tooling for Shaping Solid Wood Panel Edges on the CNC
    A CNC owner gets advice on tool selection and CNC operation for profiling the curved edges of a 2.5-inch-thick solid wood countertop.March 13, 2014

    Making Crown Moulding on a CNC Router
    Tips and tricks from those who have tried it. October 8, 2005

    Baghouse Loading Up with Chips
    Advice on getting chips to fall into the dust collector container instead of clogging the filter bag. February 12, 2010

    Troubleshooting an Under-Loaded Dust Collector Fan Motor
    When a dust collector fan keeps drawing too many amps and trips the circuit breaker, troubleshooting involves comparing the system's capacity to its actual operating load. April 29, 2006

    Sawdust as fuel
    Building a sawdust-fired boiler to heat kiln and shop. November 18, 2002

    Advice for a Young Woodworker Starting Out
    Feedback from the old-timers for an ambitious youngster. September 17, 2014

    Spiral Cutterhead Experiences
    Woodworkers discuss the cut quality and performance they've achieved by switching to spiral insert planer tooling. March 26, 2009

    Sanders
    Basic descriptions of every type of sanding equipment commonly found in wood shops. November 13, 2008

    Understanding "Demand" and "Energy" Charges on Commercial Electric Bills
    Electric utility companies charge shops a fee for the power you might use (or your peak power draw), as well as for the juice you actually consume. Here, shop owners describe what that arrangement can do to your utility bill's bottom line. February 18, 2007

    Direct Drive Shaper Motors
    A woodworker gathers information for designing a custom-made shaper for finish machining of door edges. August 30, 2010

    Horsepower Issues with Helical Cutterheads
    If you switch to spiral knives and you want to keep hogging out deep cuts, you may need to upgrade to a more powerful motor. July 8, 2014

    Defining "Value Added"
    When it comes to wood and lumber products and by-products, what is the term "value added" all about? April 18, 2009

    Are Shapers Outmoded?
    A CNC is versatile, but a good shaper is a workhorse. January 23, 2014

    Choices for Sanding Moulding
    Hand-sanding mouldings is tedious and time-consuming. Here's a set of suggestions for mechanizing the process. July 23, 2005

    Chatter Marks in Production Moulding
    It's hopeless to think of sanding milling defects out of cheap moulding. The lucky thing is, most customers won't necessarily consider this visual characteristic to be a defect. December 9, 2010

    Computerized Straight Line Rip Saws: Worth It?
    A shop owner shopping for a straight-line rip saw asks about capabilities and quality. September 25, 2014

    Jointer Chatter Marks
    With help from the forum, a problem with a jointer is traced to the bearings. October 29, 2012

    Machinery Layout Ideas
    Shop owners discuss ways to arrange a straightline ripsaw, molder, and wide-belt sander, and how to efficiently move materials from one station to the next. March 6, 2008

    Keeping the Frame Assembly Table Clean
    How to prevent glue from building up on your cabinet assembly table. October 3, 2011

    Spiral Insert Cutter Finish Quality
    Spiral insert cutter heads may leave faint lines on planed wood. October 2, 2005

    One Big Blower Versus Two Small Blowers
    Two small blowers that can run independently or together may be a more economical and more effective dust collection setup. December 6, 2006

    Creating Custom Curved Moulding Profiles with a CNC Router
    Any good CNC router can create mouldings, using either a ball-end cutter or a custom-ground bit. In this thread, pros provide a few pointers on the process. November 25, 2005

    Machining Curved Crown Moulding
    Pros describe how they manufacture small runs of crown moulding to curve around outside corners. November 8, 2008

    Knife Steel 101
    Here's a nice rundown of the various materials used to make cutter knives, along with some lively discussion. November 27, 2007

    Slowing Planer Feed Rate
    Advice and cautions on ways to slow down the feed rate of a planer. November 27, 2007

    Finger-Jointed Wood from 2x Scrap
    A discussion about the practicality of turning off-cuts into useable studs by finger-jointing. July 30, 2007

    Casing a Double-Curved Door Arch
    How do you make and install moldings for an arched doorway set into a curved wall? Very, very carefully. April 24, 2006

    Hogging Blades on Gang Rip Saws
    Equipping a rip saw with a hogging blade can have advantages. October 4, 2007

    Variable Angle Chamfers in a Production Job
    Shaper? Router? Table saw? A woodworker wants to know the best equipment choice for machining large quantities of beveled flat stock at various angles with high accuracy and ease of adjustment. June 4, 2012

    Infeed Systems for Moulders
    A moulding manufacturer wants to set up a continuous infeed system for one of his machines. He gets tips and advice on what works and what doesn't. July 13, 2005

    Double Sided Planers Versus Carpet Feed Planers
    A little insight into how two-sided planers work, and which machines are appropriate for which shops. January 17, 2011

    Machining Mullions for Glass Doors
    Advice and a step-by-step how-to for making those pesky mullions. May 14, 2006

    Causes of Grain Ridging in Moulder Finish
    This thread includes a nice concise summary of issues that cause finish defects in mouldings. August 21, 2012

    Recommended finishes for MDF mouldings
    The right products and techniques for getting a smooth, even finish on MDF mouldings. January 16, 2001

    Trimming Defects in Moulding
    Stock manufacturers describe how they control quality in runs of moulding and how they keep track of productivity. April 15, 2013

    Shaper Heads on CNC Machines
    A "shaper aggregate" offers a whole new way to do curved mouldings. Here's some introductory info on the technology. August 14, 2007

    Should I Sharpen My Own Moulder Knives?
    The advantages may be worth the set-up cost and the learning curve. December 2, 2006

    Cutter Choices
    Carbide cutters, insert knives, or high speed steel? Pros weigh in on the options. August 31, 2005

    Tear-Out Problems with Cherry
    Tips on tuning up machinery to minimize tear-out when making end-matched wood strip flooring. May 16, 2008

    Splitting Moulding Profiles
    Technical advice on running two profiles on a single piece of stock, and splitting the pieces as they come off the machine. November 12, 2008

    Regulating generator voltage
    Dealing with voltage control and wiring for generators. January 31, 2001

    Measuring Line Feet Produced with a Straight-Line Rip Saw
    Here's how you rig up a rolling measuring wheel to your ripsaw to count how many feet of wood you're running through the machine. July 9, 2007

    Cutting the Ends of Rough Lumber before Milling
    Some shops make a practice of trimming ends before starting to rip, plane, or profile wood, because gravel or other contamination on lumber ends can ruin cutting edges. September 17, 2012

    Carbide Versus HSS Tooling
    Basic info on the differences between carbide and high speed steel cutterhead knives. August 15, 2011

    How Long Will it Take to Get a Dust Collection System Installed?
    Thumbnail description of the process and timeline to set up a new dust collection system, from on-the-drawing-board to operational. January 21, 2007

    Thin Kerf Carbide Blade for Resawing
    What's the lower limit to available resaw blade thickness? January 2, 2012

    Roller Durability on a Williams and Hussey Moulder
    The yellow rollers last longer than the green ones. October 19, 2013

    Troubleshooting Grain Raise in Hemlock
    Grain raise can be addressed by tweaking planer operations. January 27, 2007

    Machining "Chicago Bar Moulding"
    Advice on making a curved bar arm-rest moulding. December 24, 2009

    Are Cryogenic Tool Treatments for Real?
    Ultra-cold treatments make claims for improving tool hardness and increasing life, but this thread provides no testimonials. December 1, 2005

    Arched Jambs for Circle-Top Doors
    Quick tips on fabricating arched door jambs. May 16, 2008

    Wide belt sanders for moulding
    Can the same finish quality be attained with a wide belt sander as with a random orbit sander? April 25, 2001

    Business Financing, Credit, and Cash Flow
    Pay as you go, or borrow to grow? This thread looks at both sides, and supplies some sage advice. December 2, 2006

    Burning Sawdust in a Wood Stove
    You can burn sawdust for heat, but the stories in this thread make it clear that the practice is a risky one. February 15, 2015

    Practical Lumber Tally Methods
    A moulding manufacturer needs advice on a method for tallying lumber that his people can conveniently implement. January 27, 2007

    Producing a Rough-Faced Board
    Thoughts on reproducing the surface appearance of rough bandsaw milled wood, starting with finished lumber, on a large scale. December 6, 2012

    Bit Balance and Tool Speed — Routers Versus Shapers
    A custom shaping knife for a router has to be carefully balanced, because routers spin faster than shapers. November 19, 2005

    Beaded MDF Door Panels
    Info on buying or making MDF beaded stock for cabinet door panels. October 15, 2009

    "Pickwick" Beadboard Cutterhead Info
    How to find router or shaper knives to make the decorative "Pickwick" pattern on the tongue side of wood paneling. June 23, 2006

    Fine Points of Linear-Foot Pricing
    Linear-foot estimating can play a role in sales and bidding, but it's only a starting point. Here's an extended discussion. August 31, 2010

    Troubleshooting Accuracy Problems on a Tenoner
    Here's a long story of a woodworking shop's difficulties in getting a tenoner set up with split tooling to work to the desired level of precision, accuracy, and repeatability. October 26, 2011

    Shop Power Choice: Single Phase or Three Phase?
    Shop owners discuss the relative pros and cons of three-phase and single-phase power supplies. February 6, 2010

    Chip Dents, Cutter Choices, and Dust Extraction
    Dents made by chips being pressed into the wood by the planer or jointer knives are a common problem. Here's a thorough discussion of causes and remedies.April 15, 2013

    Shop-Built Beaded Face Frame Notching Machine
    A Woodweb member displays the machine he invented and built to automate the notch cuts for beaded face-frame joinery. June 15, 2009

    Adhesive for Gluing Knots in Paneling
    A heavy-bodied gap-filling formula might work best for knots. October 16, 2013

    Slowing a Feed Motor with Variable Frequency Drive
    Motor speeds can be adjusted with electronic add-ons, but there are complications. October 4, 2007

    Calibrating Wood Thickness for CNC Part Production
    A CNC shop needs help figuring out how to achieve consistent thickness on stock before sending it to the CNC for cutting into small parts. The discussion ranges over belt sander accuracy, planer choices, onion-skinning techniques, and more. April 21, 2008

    Assembling and Gluing Staved Columns
    Here's a boatload of advice and ideas about how to put together and glue octagonal columns made with staves. October 23, 2007

    Door Sanding Quality Issues
    Here's advice on setting quality standards for cabinet door final sanding, and meeting the goals in a competitive market. April 2, 2013

    Machining raised panels
    Addressing workpiece movement and tear-out problems. April 9, 2003

    Shopping For Shapers (To Make Your Own Doors)
    There's a choice of machines, but is it worth it? April 10, 2005

    Specialty Planer Heads
    Pros discuss the options and their preferences. April 10, 2005

    Troubleshooting a Cyclone Chip Clog
    Advice on making a cyclone stop clogging when when trying to separate large chips of light material. July 29, 2012

    Techniques for making tapered rips
    Various machine and jig options for producing large quantities of tapered parts are offered . January 9, 2001

    Sawmill recovery rate
    Does one sawmill's recovery rate make it a better choice over another mill? (From WOODWEB's Sawing and Drying Forum) February 18, 2003

    Solid Wood Entry Door Construction
    An extended technical discussion of proven methods for constructing large, heavy, durable custom doors using solid sawn lumber. January 18, 2007

    Making Stove Pellets from Shavings and Sawdust
    A look at the technology for turning wood waste into wood-stove briquettes or pellets. Is it practical? January 25, 2010

    Expanding portable sawmill business
    A hard look at the pros and cons of expanding a business. October 9, 2002

    Starting a portable sawmilling business
    Advice on making a living with a start-up sawmilling business. June 24, 2001

    Stave-Core Door Skin Thickness?
    Quick tips on applying and planing down the veneer skin on a stave-core door. October 11, 2007

    Woodworking Information at WOODWEB
    WOODWEB provides information for the wood industry including woodworking, cabinets, components, woodworking software, wood finishing, cabinet hardware, lumber, plywood, woodworking machinery, suppliers, and tooling

    Why is Wood Flooring Kerfed on the Bottom Face?
    Speculation, theories, and facts about why wood flooring and some door jamb stock is usually milled with grooves in the underside or back side. October 13, 2008

    Choosing shaper tooling
    Making the most of a new spindle shaper. Includes advice on grinding knives. November 7, 2000

    Reality Check for Urban Wood Sawmilling Idea
    What a cool idea — invest in some equipment, saw up "free" logs, and make a tidy profit. If it were only that easy. December 11, 2007

    Preparing Face Frame Stock
    A lively discussion among cabinetmakers about whether, when, and how to joint, plane, or sand stock for face frames. October 8, 2005

    Beading Face Frames on a CNC Router
    Here's how one shop machines the joints for cabinet face frames using CNC equipment. January 21, 2007

    Seeking Lightweight Materials for an Oversize Moulding
    Pros suggest alternatives to wood for a 15-inch-wide cove moulding installation. October 28, 2014

    Straight-Line Rip Saw Operation
    An extended discussion of safety and operating technique for straight-line ripsaws. May 28, 2006

    Best Dedicated Tool for a Straight Groove
    over and over, until the world gets the message. Router, shaper, or table saw? November 27, 2007

    Beaded Face Frame Basics
    Advice on how to add the "cheese cove" or "quirk bead" detail to beaded face frame cabinets. February 28, 2012

    Accuracy of Planers
    A woodworker looking for the finest piece of steel he can buy sets off an extended discussion of top quality planers. March 10, 2008

    Crown Moulding Expansion/Contraction Problem
    Who or what is responsible for gaps appearing at joints after installation? June 4, 2004

    Should a Moulding Mill Bring Sawmill Operations In-House?
    Here's a long, detailed, and authoritative examination of a moulding mill owner's proposal to invest in his own sawmill operation. April 20, 2011

    CNC Versus Conventional Equipment for Entry Door Construction
    Woodworkers wax poetic as they discuss the practical considerations, the historical ramifications, and the spiritual significance of evolving technology in the field of door construction. January 23, 2014

    New Shop Dust Collection
    A shop owner re-thinks everything from the ground up as he ponders the dust-collection system for his planned new shop. June 15, 2014

    Climb Cutting Door Parts on a Shaper
    Here's a long, detailed discussion of climb cutting, with some strongly worded cautions and many practical tips. April 21, 2011

    Grading lumber for an addition
    Must home-milled lumber for use in a home addition be graded? June 24, 2001

    Rx for Wood Machining Defects
    Dr. Gene Wengert examines the causes for defects in solid lumber caused by machining. 1998.

    CNC tooling slippage
    Could it be the collects, the cleaning, the cones... what? July 9, 2002

    Moulding prices
    Pricing product in a small, start-up moulding manufacturing operation. October 9, 2002

    Lean Production of Raised Panel Doors
    A discussion of tricks for evening out workflow, such as: to speed up the whole job, move labor to the bottleneck from downstream activities. June 28, 2013

    Sharpening Jointer Knives on the Machine
    Woodworkers discuss various ways to dress or sharpen jointer knives without removing them from the machine. August 1, 2011

    Gang Ripsaws, Movable Blades, and Optimizing Production
    A question about buying a straight-line ripsaw with movable blades turns into a wide-ranging discussion about optimizing stock production on various kinds of ripsaws. January 17, 2011

    Chip Removal and Planer Finish Defects
    A classic defect with a well-known cause: chips recirculating around the cutter head and being pounded into the wood. But how to fix it? May 15, 2012

    Financing Big Equipment Purchases
    Don't look for long-term loans — equipment should pay for itself inside of five years. January 22, 2006

    Moulding on a Curved Wall
    Installing trim work along a curved staricase. February 28, 2004

    Modifying a Multi-Function Machine
    Is there a way to make the shaper on a combination woodworking machine spin fast enough to use router bits. January 27, 2007

    Woodworkers and Labor Unions
    Woodworkers discuss the relevance of organized labor to modern conditions in the industry. February 6, 2007

    Variable Speed Fans for Dust Collectors
    A variable speed fan and controller can save energy during times when the dust collector is not required to operate at full capacity. October 16, 2012

    Straight-Line Rip-Saw for a Small Shop?
    Should a two-man cabinet shop acquire a straight-line rip-saw? The discussion balances cost against quality and productivity issues. March 13, 2014

    Importance Of Aggregate Applications
    07/30/2014

    Stile and Panel Material Size Optimizing in a Production Door Shop
    Advice on material optimizing in production cabinet door manufacturing. May 12, 2013

    Six Simple Marketing Steps
    Wood marketing tips from Forest Service expert Steve Bratkovich, with feedback from sawmill owners and lumber dealers. July 26, 2005

    Harvesting Urban Lumber
    For some, turning urban and suburban trees into useable lumber can be a successful niche business. July 30, 2007

    Getting a Square, Clean Edge on Face Frame Stock
    Cabinetmakers discuss tolerances for face frame edges, and compare ways of prepping stock. April 6, 2007

    Keeping cutterhead balance
    Number of knives and other factors in cutterhead balance. (From WOODWEB's Solid Wood Machining Forum) March 5, 2003

    Cutterhead Knife Angle
    Long and detailed discussion of knife grinding, focusing on back bevel and side clearance. February 19, 2006

    Customized Vacuum Setups for Small Parts
    This long thread offers detailed suggestions for holding down small parts on the CNC machine. January 14, 2008

    Setting up a milling business
    How much land, what equipment is needed, and in what order, for a startup sawmill. April 24, 2002

    Moulding Cutters for a Shaper
    A newcomer seeks advice on tooling up to make mouldings on a shaper. In a long discussion, pros explain some of the options. August 31, 2005

    Dust Collector Location for Widebelt Sander
    This discussion about suspending filter bags above a machine brings up some good points about the value of a cyclone for catching the majority of sanding dust before it hits the filter. August 31, 2010

    Machining S-Curved Crown Moulding
    Woodworkers weigh in on a complex machining challenge: crown moulding with both an inside and an outside curve. September 5, 2006

    Arched Door Casing Against a Curved Wall
    Pros discuss a complex trim problem: The intersecting circular arcs resolve to an ellipse, but that doesn't make it easy. October 4, 2005

    Moving Into Bigger Space
    02/18/2014

    Conditioning: Relieving those stresses
    Try these solutions to a stress-free wood inventory. November 29, 2002

    Set-ups For Making Raised Panel Doors
    Rigs, jigs, and customized equipment for high-volume raised panel door production. April 10, 2005

    Evaluating a Straightline Rip Saw
    Information on straight-line ripsaws' capabilities, characteristics, and performance. April 21, 2011

    Knife Grinding and Woodworking Manual 3 -- Excerpts Part 3
    One in a series of excerpts from the grinding manual of Charles G.G. Schmidt & Company. 1998.

    Making Custom Curved Moulding for Arched Doors
    Ideas for curved moulding fabrication, including nice photos of a couple of router-table jigs. February 18, 2011

    CNC Collet and Chuck Choices
    CNC pros compare the advantages of different tool-gripping technology. November 26, 2007

    Modeling Compound-Curved Casing
    CAD users puzzle out how to render a complex curved moulding shape. March 26, 2008

    Comparing Insert Cutterheads
    Do the differences in cutting tooth alignment between different brands of insert cutterhead matter? January 8, 2010

    How to Make Haunched Face Frames
    Various woodworking techniques described for making beaded face frames for cabinets. February 6, 2007

    Accuracy and Tolerances in Humidity Measurement in a Drying Kiln
    Super precision is rarely critical in wood drying, but reasonable accuracy is helpful. Here's a discussion of RH measuring precision, and its importance for maintaining proper real-world kiln conditions. July 29, 2012

    Re-Drying Kiln Dried Lumber
    An architectural woodwork mill gets advice on acclimating stock before machining it. December 9, 2010

    Warping, Bowing and Cupping of Moulding Batches
    Expert input on what could make fresh runs of moulding move in unwanted ways. October 2, 2005

    Getting to Know Aggregate Tools
    A newcomer to CNC asks for a basic explanation of what aggregates are and how they work — and gets one. April 10, 2008

    Container-Bin Dust Collection Setup
    Shop owner describes a site-built rig for capturing dust and shavings using filters and a tarp on top of a shipping container. January 21, 2007

    Avoiding Shaper Blow-Out
    Various suggestions for achieving clean, sharp profiles without tear-out and blow-out when running moulding on a shaper. July 28, 2007

    Shaping with a Table Saw
    Lacking the machinery to run a large moulding, a woodworker spends a few hours using his table saw to cut the curve. May 28, 2010

    Over-Drying and Wood Quality
    Kiln operators discuss what happens to lumber when you overshoot your moisture content target. February 14, 2006

    Troubleshooting Checking in African Mahogany
    Woodworkers puzzle over unusual cracking in some African Mahogany rough-sawn stock. February 6, 2010

    Workers' Comp for Owners?
    February 25, 2005

    Cutting M2 Knife Steel
    Is burning the steel while cutting a concern? January 16, 2004

    Replacing Worn Bearings on a Planer
    Changing out ball bearings may be a job for a specialist. Even so, here's a detailed description of how it's done. November 28, 2006

    Wood getting stuck in planer
    Some possible causes and solutions to the problem of wet wood getting stuck in a planer. June 14, 2000

    Cutting Clean Grooves
    A discussion of ways to dado drawer parts to accept bottom panels, without chipping and other defects. April 15, 2009

    Who Does the Wood Trim Takeoffs?
    Should the wood moulding supplier do quantity takeoffs, or should the customer do it? January 19, 2011

    Chip Clearing and Dents in Mouldings
    Dents that occur when chips are pressed back into the wood by cutter ends are related to problems with the dust collector's suction. July 18, 2008

    Regrinding Corrugated Knives
    Is it worth it to try re-grinding an odd-lot batch of old knives to new, useful profiles? Or alternatively, is there a used-tool market for them? July 25, 2010

    Helical Cutterheads and Clean Gluelines
    Will a helical cutterhead leave little lines that may compromise glue joints? Professionals discuss finish quality, sharpening, and setting. March 26, 2007

    Cost Cutting and Productivity Boost for Small Box Production
    Outsourcing some lumber profiling for a small custom item could carry a big comparative advantage. April 15, 2012

    Shavings for Sale
    The always resourceful sawyer crowd discusses the packaging and marketing of wood chips. February 9, 2005

    Sawmill waste disposal
    Producing power and other ideas for utilizing waste from a milling operation. January 21, 2002

    Straight Line Rip Saws for Glue-Up
    A good straight line rip saw makes rips you can glue up with no further processing. Here's advice on choosing and maintaining your machine. July 28, 2008

    Teamwork Versus Solo Work on the Shop Floor
    Cabinetmakers discuss efficiency on the shop floor. When should people work in pairs, and when should handle tasks alone? June 23, 2014

    Making Templates from Existing Mouldings
    Moulding shop pros discuss how to scan and import profiles of existing mouldings in order to make exact drawings or manufacture new knives. November 10, 2006

    What Equipment is Needed to Switch to Face-Frame Construction?
    A cabinetmaker who usually builds frameless asks about the tools he'll need to add face-frame cabs to his product mix. February 26, 2007

    Wood Movement After Re-Sawing
    It's common for boards to twist, bow, or cup after being re-sawn. Here's some explanation. March 4, 2009

    What does Visual Basic do?
    An explanation of how Microsoft's Visual Basic for Applications works. June 13, 2001

    Selling small quantity custom profiles
    Dealing with customers who don't comprehend the work and cost involved in the manufacture of custom knives. June 6, 2001

    Finishing the Ends of Cedar Chair Slats
    Woodworkers suggest ways to automate end finishing of pieces. October 4, 2007

    Tapered Stop Flutes
    The search for a simple, efficient method. December 26, 2004

    Troubleshooting Twist in Cabinet Doors
    Here's advice on building cabinet doors to minimize twisting caused by wood moisture content changes. January 26, 2009

    Three phase generator
    Running machinery off of a three-phase generator. September 2, 2002

    Truing-up rough wood
    Planers will not remove the bow from rough stock; jointing is required before boards can be properly thicknessed. February 13, 2001

    Troubleshooting Uneven Pitch Marks from a Jointer
    Pros suggest possible fixes for a jointer that's creating uneven pitch marks on lumber. May 18, 2010

    Turning Sawdust and Shavings into Fuel
    Shop owners discuss machinery that makes logs or briquettes out of wood waste. April 30, 2006

    Loosening Seized-Up Machinery
    It ain't no use if you ain't got the juice. April 21, 2011

    Distressed finish
    Techniques for making new furniture look old and beat up. February 19, 2002

    Cutting a Bead on a Curved Backband Moulding
    Tips on fine-tuning an elliptical shaper jig so that it will profile a bead correctly on the inside edge of a curved piece. June 24, 2007

    Troubleshooting Table-Saw Motor Vibration
    Could be the pulleys, the belt, or the motor itself. September 17, 2008

    Accountability for Product Defects
    Views on when and how to catch and fix defects. May 4, 2005

    Rip Saws
    Basic information about straight line rip saws. November 13, 2008

    Getting Rid of Rip-Saw Cutoff Waste
    Ideas for making a little spare change out of that pile of rip-saw off-cuts. May 26, 2008

    Grain standards for radius mouldings
    Standards methods for joinery of radius mouldings, with exposure of end-grain in mind. June 6, 2001

    Machining Lock Miters on Large Pieces
    A millwork fabricator gets advice on how to cut lock-miter profiles into the long edge of very long and wide MDF panels. November 10, 2006

    Making Curved Crown Molding.
    09/29/2017

    Knives 101
    Technical tips on choosing, adjusting, maintaining cutterhead knives. February 14, 2007

    Moulding maple versus oak
    Why such problematic tearout on one and not the other? September 23, 2003

    End-to-End Knife Marks in Maple
    Knives in bad condition caused linear scratch marks in Maple moulding. What's the fix? May 11, 2011

    Shopping for a Straight-Line Rip Saw
    There are different flavors of straight-line ripsaw for different parts of the industry. Here's advice for a cabinetmaker with a budget, shopping for a smaller machine. January 2, 2012

    Applying a Bead to an Arched Face Frame
    Several suggestions for machining a bead into an arched piece, plus the simple way: make it separately and then attach it. October 27, 2011

    "Rustic" Lumber — What Is It?
    What visual qualities define lumber as "rustic" is a matter of subjective perception and opinion. February 4, 2011

    Sanding Shaker Door Edges
    Cabinetmakers describe how they manage to get square door edges sanded while maintaining a consistent size. June 16, 2014

    Fabricating an Elliptical Arch
    What's involved in creating an elliptical archway trim package? June 23, 2006

    Sanding Moulding Profiles
    Tips and tricks for sanding the profiles surface of trim moldings without overly softening the sharp edges. August 21, 2006

    Mimicking the Appearance of Circle-Sawn Lumber
    How to add "faux" saw marks to wood. May 5, 2007

    Raised Panel Cutter Options
    Shop owners compare the advantages of insert and tipped tooling for machining raised panel doors. October 20, 2005

    UV Finishing Of Mouldings
    11/06/2014

    Oddball Crown Moulding Miters
    Advice on joinery for spots where curved mouldings on an arch meet a horizontal return, and other odd intersections. December 6, 2008

    Markets and Disposal Outlets for Sawdust
    These suggestions relate specifically to the Indiana area, but are food for thought in other locations as well. July 29, 2012

    Wide Belt Sander Tracking Marks
    Troubleshooting wavy, snakelike sanding marks left by a wide belt sander. December 21, 2010

    Moulding Calculator Spreadsheet Program
    A free downloadable Excel spreadsheet that calculates the price per foot to charge for mouldings. December 16, 2000

    Troubleshooting Carbide Insert Cutter Breakage
    In this case, someone probably hit a nail. But the discussion includes a useful list of possible causes to investigate. February 9, 2008

    Routing Flutes on Large Cabinet Doors
    Advice on tool choice, measuring, marking, and jigs for cutting multiple flutes into a big door panel. January 18, 2007

    Relative Humidity in the Wood Storage Area
    Advice on what humidity level to maintain where rough lumber is stored, and how to accomplish that. September 23, 2008

    Sanding Door and Frame Stock Edges
    Thoughts on a practical way to sand MDF edges using a shaper, drum sander, or table saw with a sanding disk. June 18, 2009

    MDF and Shaper Cutter Life
    How much wear and tear does MDF cause for knife edges? August 31, 2010

    Accurate Scales for Balancing Cutters
    What level of accuracy is required when weighing knives for balance during sharpening — and how do you achieve it?August 12, 2014

    Custom Mouldings for Arched Window Tops
    Manufactured windows may not have regular, true, or consistent dimensions. The safest bet is to make a template from the actual window. October 13, 2005

    Making Beaded Panels
    Equipment and techniques to cut beads in solid wood panels. April 18, 2006

    Tips on Making Radius Moldings
    Explanation and examples of radius arched door casings. September 15, 2006

    Marketing for a New Custom Mouldings Business
    How to reach customers who want custom runs of moulding. January 22, 2006

    Warpage in maple door panels
    Despite a careful glue-up, a woodworker gets warpage in door panels. June 14, 2000

    Running Radius Mouldings on a Standard Shaper
    Tips on making curved mouldings with jigs, ingenuity, and a shaper. December 6, 2008

    Markets for Wood-Shop Waste
    A woodworker who generates high volumes of dust and shavings from wood and MDF panels explores the recycling options. March 12, 2014

    Mitered Doors in a Production Shop
    Quick tips on the top issues involved in making mitered raised-panel doors in volume. October 2, 2007

    Insert Tooling and Cutterhead Balancing
    Ways to balance your cutterhead when you don't need all four knives. September 17, 2008

    Straight Knives Versus Spiral Knives in a Planer
    Pros and cons of helical and straight planer knives, and some tips on quality control. February 27, 2007

    Machining Alder
    Tips on hook angle, feed speed, and more. February 19, 2006

    Waste factors in floor manufacturing
    The amount of wood wasted from rough to finished flooring may surprise you. January 24, 2001

    Hook Angle for Large Radius Cutters
    To cut the right profile, very large cutters need special attention to hook angle. September 10, 2007

    Repairing an Imprecise Glue-Up
    Tiny bevels on the ripped edges of boards have resulted in a visible gap after glue-up. How to fix? February 13, 2013

    Jigs for setting planer knives
    Accessories for setting planer knives in the cutterhead. June 14, 2000

    Table Wax Choices
    Woodworkers discuss products they use to keep their table surfaces friction-free. March 16, 2015

    A Straight-Line Rip Saw for a Small Sawmill Operator
    A small operation can use a straight line rip saw to produce S4S lumber, but it helps to have a helper. October 19, 2013

    Machining Green Western Red Cedar
    Wet wood fibers do not machine cleanly. February 17, 2014

    Jointers
    Basic description of jointing equipment and its use. November 11, 2008

    Curved Crown Machine
    01/20/2014

    Cutters for Machining Cellular PVC
    Plastic trim material mills well with ordinary tooling. May 5, 2007

    Scales for Weighing Cutter Knives
    Out-of-balance cutters can do expensive damage, so shop carefully for a scale to weigh them. May 6, 2014

    Pros and Cons of Helical Heads for Jointers
    A long discussion of spiral cutterhead performance. May 16, 2014

    Planer Selection, Maintenance, and Performance
    Better (and more expensive) equipment can provide better results, but setup and maintenance make a difference with high-end as well as low-end machinery. December 29, 2008

    Boring Machine Accuracy and Dowel Joinery
    A discussion on achieving a nice joint fit when using dowels along with cope-and-stick joinery for 1-3/4"-thick door construction. May 6, 2009

    Hand-Honing Tips for Cutter Knives
    Remarks on honing and deburring cutterhead edges, and some thoughts on knife materials and performance. April 30, 2006

    Profile Grinding Bent Wood
    The developer of an innovative method for extreme-bending hardwood explores options for profiling his bent pieces using abrasive wheels. March 12, 2014

    Blowing Shavings into a Trailer
    Tips on modifying your dust collection system to convey wood waste to a large trailer. June 15, 2014

    Buying a Used Straight-Line Rip Saw
    Tips on inspecting an old straight-line rip saw for serviceability before plunking down your cash. May 16, 2008

    Powering a CNC Router Using a Phase Converter
    It works fine, say those who are doing it — but there are a few details to consider. November 12, 2005

    Helical [?] Casing
    02/06/2014

    Producing Drying Defects on Purpose
    A client requests surface checks in his kiln charge of white oak. Should the operator oblige? May 11, 2005

    Building Up New Stair Treads
    Woodworkers discuss techniques for applying new stair treads over the top of existing stairs. November 26, 2007

    Profiling Door Trim for Accurate Installs
    Is it worth detailing pre-finished jamb and casing stock with routs to accept splines for registering the pieces during installation? June 12, 2013

    Profile Knife Grinders for Replicating Mouldings
    A discussion of knife grinding equipment and techniques for a woodworker who wants to reproduce historic mouldings for custom work. January 28, 2013

    Putting Points on Survey Stakes
    Machinery options for putting a pointed end on stakes in mass quantities. June 18, 2010

    Basics of Ripping Lumber
    A simple overview of straight-line ripsaw technology. October 11, 2010

    Pricing Lineal Moulding
    Tips and advice on setting a per-foot price for custom moulding runs. July 23, 2007

    Baghouse Versus Cyclone
    Advice on choosing a chip and dust removal system, based on the shop's situation. June 15, 2014

    Planer Choice: 3 or 4 Knife Cutterheads?
    According to these pros, buying the 4-knife model and running it with just 2 knives makes sense. December 15, 2005

    Phase Converters for Powering CNC Routers
    CNC owners report good success with using phase converters to provide three-phase power to their equipment. November 14, 2009

    Best Hook Angle for Corrugated Insert Knives
    Here's some insight into hook angles. Different hook angles may work better for different woods, but other factors matter more. May 5, 2007

    Power Feed Slipping with Melamine
    Melamine is so slick, you may need to tweak the power feed, or even buy better wheels. July 27, 2008

    Bead Board Panels: Make or Buy?
    Bead-board paneling is not that hard to get, but you can also make your own. October 2, 2007

    Blower and Cyclone Positioning
    Should the blower push air into the cyclone, or pull air out of it? October 1, 2010

    Profile For Beaded Column???
    10/08/2013

    Power Requirements for a Three-Phase Sander
    Advice on power adapting equipment to power a three-phase sander from a single-phase circuit. February 24, 2008

    Troubleshooting a Cyclone Setup
    A woodshop owner struggles with a dust collector whose filter quickly clogs with fine sanding dust. October 26, 2011

    Tooling Up for a High-School Wood-Shop Program
    Cabinetmakers advise a high school shop teacher on how to equip a new shop class program. July 11, 2007

    From Installer to Cabinet Shop
    Can a successful installer start a successful cabinet shop, by focusing on sales? This question starts a wide-ranging discussion of how cabinet shops succeed. November 28, 2011

    Dressing Stock, Stress, and Movement
    A discussion of planing and jointing techniques: Does wood need to "rest" between passes? April 30, 2009

    Wrapping a Cone with Crown Moulding
    Practical math and hands-on approaches to a tricky crown moulding problem. February 28, 2012

    Compressed Air Lines in a Shop
    Advice on material choices and layout strategies for compressed-air supply lines in a woodshop. March 28, 2010

    Stiffening a CNC Rake
    A technician comes up with a shop modification to stiffen the rake attachment on an SCM Pratix CNC machine. February 15, 2015

    Milling Radius Crown Moulding
    Advice on how to run pieces of radius crown moulding using a tilting head shaper. January 22, 2006

    Cope and Stick Joinery with a Router
    Tips on door construction using a router table and sled, and an extended discussion about outsourcing doors versus building them in house. June 28, 2007

    Scalloping Marks Left by a Helical Jointer Head
    Helical heads reduce tearout, but leave a scalloped surface that some find objectionable. Here's a long and detailed discussion. April 10, 2008

    Equipment and Curriculum for a Woodworking School
    Woodworkers discuss the shop equipment, software, and focus appropriate for a serious secondary school program intended to train professional woodworkers. July 27, 2008

    What's the Best Machine for Ripping?
    His tablesaw produces curved rips, so a shop owner wonders: should he buy a ripsaw, a bandsaw, or what? August 19, 2013

    Large Ogee Edge Profiling
    Woodworkers discuss methods for machining a very deep edge profile onto a big, heavy countertop. April 18, 2015

    Cost of Shop Power
    Understanding (and minimizing) your shop's utility bill. July 5, 2006

    Shaper Advice for Euro-style Outswing & Tilt-Turn Windows
    Tilt-and-turn windows in the European style require fine tolerances and call for good tooling. January 28, 2014

    Reversing a Shaper, Jam Nuts, and Lock Washers
    For safety, make sure the shaper head is firmly attached and can't work loose. February 22, 2011

    Cutting Giant-Size Crown Moulding
    Cutting really huge crown moulding — like 24 inches wide — poses a unique set of problems. Here are stories, examples, and suggestions. April 24, 2009

    "Chip Dent" in Planed Lumber
    Here's a long, detailed examination of the problem of denting in planed wood, caused by knives pressing chips into the wood surface. Unfortunately, no solutions. October 15, 2009

    Reground Planer Knives Trapping Chips
    Woodworkers help figure out why chips won't clear out from the workpiece after a set of planer knives comes back from the grinder. March 14, 2006

    Shaper Setups for Complex Joinery
    Here's a long thread that delves into shaper choices and shop rigs and jigs for advanced joinery such as mortise-and-tenon window sash. October 14, 2008

    Gorilla Glue Pros And Cons
    04/28/2013

    Lock-Miter and Miter-Fold Joinery with MDF
    Detailed discussion of creating good corner joints when building up a column out of flat MDF. June 28, 2007

    AutoCAD Drawings, Step by Step
    Efficient development of shop drawings. April 18, 2004

    An overview of sawmill operations
    Sawmill operators swap experiences, "war" stories, and ideas for production profitability. October 17, 2000

    Knife Grinding and Woodworking Manual 1 -- Excerpts Part 1
    One in a series of excerpts from the grinding manual of Charles G.G. Schmidt & Company. 1998.

    Antique Machinery and Stair Rail Fabrication
    The old machinery is cool, but it can't compete with modern CNC equipment for productivity (or safety). October 19, 2013

    Knife Grinding and Woodworking Manual 2 -- Excerpts Part 2
    One in a series of excerpts from the grinding manual of Charles G.G. Schmidt & Company. 1998.

    Comparing European-Made Shapers
    Woodworkers describe and compare the characteristics of shapers manufactured by Utis and Panhans. February 1, 2015

    Beaded face frames on CNC
    Developing the right CNC setup for beaded face frames. February 13, 2001

    Face-frame joinery techniques
    Cabinetmakers discuss various techniques for joining cabinet face frames. October 31, 2000

    M42 high speed steel
    Information on M42 and jointer knives. April 2, 2002

    Finding good help
    How to find and keep reliable employees for your sawmill business. January 16, 2002

    Climb-Cutting for Stiles and Rails
    Cabinetmakers suggest equipment and techniques for creating sharp-edged grooves with minimal tearout. May 22, 2006

    Doors: Outsourcing vs. in-house
    Exploring issues of quality control, efficiency and profitability. November 7, 2001

    Small-Shop Cyclone Advice
    Even for fine dust, a cyclone is the key to keeping filters free-flowing. April 13, 2012

    Chip-free cutting of composite panels
    Consider these factors when striving for chip-free cuts in composite panels. February 13, 2001

    Cyclones for Fine Sanding Dust
    A taller, more narrowly tapering cyclone seems to remove fine dust more effectively, but you'll still need a fine filter downstream of that. July 29, 2012

    Router Table Versus Shaper
    Which to buy? It depends on the intended use. The two are suited for different purposes, but there is some overlap. October 2, 2005

    Millwork set-up fees
    What do small millwork shops charge for set-up on custom runs? March 20, 2001

    Tools and Methods for Beaded Face Frames
    Cutting the beads and the miter joinery could be a CNC deal, a table-saw and jig deal, or a hand chisel and shooting block deal. Here's the debate. April 15, 2011

    Tweaking a Woodmaster Sander
    Advice on how to get acceptable sanding performance out of a small multi-purpose machine. January 19, 2011

    Small Shop Struggles
    A one-employee cabinet shop owner gets wide-ranging practical advice on managing his fledgling business. The voice of experience, from pros who have been there. August 29, 2005

    Building Heavy Barn Doors
    Can you make those barn doors stable? Here's a discussion of how to anticipate and deal with the inevitable movement of wood components. March 18, 2006

    Electric vs gas mill
    Which is simpler and cheaper to run? (Sawing and Drying Forum) April 29, 2003

    Routing Flutes Across a Board: CNC Versus Jig Rig
    This thread has some practical suggestions for routing flutes across the width of a board, and some good arguments for farming the job out to a shop with a CNC. August 5, 2010

    Splicing Pre-Finished Crown Molding
    Tips for getting a tight joint on pre-finished crown molding splices.

    A retail lumber business?
    Tips for success in a start-up sawmill-to-retail business. January 16, 2001

    Insert Cutterheads for Finish Planing
    Despite their advantages, spiral insert cutters may not be suitable for finish planing for glue-ups, according to some users. November 13, 2005

    Site Map at WOODWEB
    Site Map at WOODWEB

    Window Beading and Water Drainage Issues
    An extended discussion of window construction wood joinery and water management. June 18, 2010

    Performance Issues with "Roasted Birch"
    The process of heating wood to 300°F takes a toll in terms of strength, durability, and workability. December 9, 2008

    Pods On Top Of Spoilboard
    10/30/2021

    Using Lyptus
    Here's a detailed thread on woodworker experiences using Lyptus wood. April 20, 2008

    Value of a Sliding Table Saw
    Cabinetmakers discuss whether, and why, a sliding table saw is worth having around when other tools can do (sort of) the same thing.April 29, 2012

    Best Philosophy For Managing Volume
    05/09/2014

    Glued-Down Wide Pine Flooring
    A long discussion of installation methods for wide board floors. August 21, 2006

    A Curved Mahogany Bar Top
    This discussion of a curved bar top job gets into wood choices, joinery, templating, fabricating, and more. February 13, 2009

    Outdoor Stair Glue-Ups with Tropical Woods
    Complex glued assemblies have trouble in outdoor exposures. This discussion takes a look at that, and at the difference in performance among various tropical hardwoods. January 14, 2013

    CAD software for architectural millwork
    Choosing the right CAD package for angle calculations and complex displays. January 3, 2001

      ---   Return to Top   ---     


    Forum Results:

    Re: Kentwood Moulders 609HD
    A message posted at WOODWEB's Architectural Woodworking Forum (7/15) -- Dan Your question is subject to everyone's opinion, we all know what is said ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (4/28) -- I happen to be old school moulder operator. I can set up a moulder in almost the s ...

    Re: Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- James That’s the one-million-dollar question with no definitive answer. I will try ...

    Re: William and Hussey Moulder Chicago
    A message posted at WOODWEB's Solid Wood Machining Forum (4/7) -- Sara, you need to think of your request from the moulder owner's perspective; there ...

    Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/1) -- Looking for advice on moulders...I am currently in the market for my first moulder ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/28) -- Hi Scott, I did the weinig training last March for a 8 head machine we purchased. ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Your estimated numbers for our current case is correct Russ. I am also aware that ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/7) -- We frequently run 1-1/2" moulder heads on our 1-1/4" SCMI shaper, up to 4 ...

    Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/2/22) -- I have almost zero experience with moulders. A few classes on an old 5 head wein ...

    Second Moulder Choice
    A message posted at WOODWEB's Solid Wood Machining Forum (2/2) -- We currently have a 7 YO, 6 head Weinig moulder. We need another moulder dedicated ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/29) -- Wow, you have a project. My first moulder was an old Stetson Ross that I tore down ...

    shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- I've never used a shaper or moulder before and I purchased a bunch of barely ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Great questions, its nice to see you doing your homework before your purchase. Let ...

    High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- We are currently running 3 Weinig Profimats. To become more efficient and fast, we ...

    Re: aggregate durability
    A message posted at WOODWEB's CNC Forum (1/3) -- I have 4 different aggregate heads, including a moulder. We are very careful with our heads due to t ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (5/2) -- Thanks again. I'm surprised a template would create a different profile, but I ...

    Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/18) -- Hi, I've got a Weinig 6 head moulder and I've also got a 24" gang ripsa ...

    Re: Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- The Weinig U-17a is in my opinion one of Weinig signature moulders, that was very ...

    Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- Hello all! I was just wondering if we could get some hourly rates from different pa ...

    Tool grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/8) -- We try and buy our moulding but I feel a Moulder may be in our future so we can con ...

    Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Business and Management Forum (2/7) -- Hello all! I was just wondering if we could get some hourly rates from different ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (5/2) -- Chuck, Their is really no comparison between a proper moulder and all the smal ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/29) -- Hi Dave, If you can't find the book i have one. We got a newer moulder so i rarely ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/25) -- Please let me add to this statement 2 - Then you get into horse power of the motor ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25) -- I wrote a Thru Feed Moulder Operator's Manual in 1996. It is basically an 8 day pr ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/24) -- While a woodmaster might not be a truly industrial machine i can speak from ex ...

    Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/24) -- So I've been running a Kentwood moulder/knife grinder setup for a couple of yea ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Thanks a lot for the help Russ. I think we'd better choose moulder with jointed po ...

    Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21/25) -- Can someone explain the hydrolock moulder head please. The ones I've seen have ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21/22) -- We do mostly S4S for rail/stile stock on a 5-head moulder. As David mentioned, ...

    Re: CNC in high end residential
    A message posted at WOODWEB's CNC Forum (7/17/24) -- Yes, we do residential, although our main focus is high end commercial, hospitals, casinos, chur ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I have determined that running a 4-sided moulder is more art than science. You mig ...

    Re: RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/14) -- Luke A company named NuCedar out of Massachusetts mills this type of product, ...

    Re: Pricing Lineal Mouldings
    A message posted at WOODWEB's Business and Management Forum (5/13) -- If you haven't changed the process in 15 years you shouldn't need to change the ...

    Re: moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- We do not run a single thing through our moulders without planing them first. Yes, ...

    sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/23) -- Hi all, I'm new to grinding moulder knives (about 5 months). I occasionally get ...

    moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- If we purchase a moulder can we get away with just straight line ripping and runni ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- We never run rough lumber through our moulders, even with "face jointing" ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/6/25) -- Alan, I have a briquetter to take care of my planer shavings. I ...

    Spindle molder as pre mill
    A message posted at WOODWEB's Cabinetmaking Forum (6/5) -- We are doing some work for a builder who is particularly fussy about the scribe line and g ...

    Re: aggregate durability
    A message posted at WOODWEB's CNC Forum (1/4) -- Set up time is not that great with the moulder aggregate or dedicated unit, and when you use the sam ...

    Re: Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/29) -- Data from the Northeast: We probably pay all our people a bit more than average ov ...

    Re: S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/28) -- A properly set up moulder (like a planer) will produce no discernible snipe. Never ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/28) -- Maybe I don't have the back story, but I don't understand why a moulder is being u ...

    Weinig P22N Moulder Max Cutter Head Lengths
    A message posted at WOODWEB's Architectural Woodworking Forum (4/14) -- Dear professionals, I have a Weinig P22N seven head moulder and we only inten ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/12) -- I too say go with the Weinig. I also agree that when we leased ours, I found ...

    Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Hello everyone, I'm currently having problems with glue failure on my glued up sta ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/10) -- Michael, I'm only going to offer one piece of advice that often gets over loo ...

    need of Arched Moulder service NYC
    A message posted at WOODWEB's Architectural Woodworking Forum (1/9) -- we seeking somebody in NYC/ Long Island with a arched moulder or CNC with a mo ...

    Re: Kentwood / Leadermac Moulders
    A message posted at WOODWEB's Solid Wood Machining Forum (4/4) -- Bill I have many clients that use all the major brand names. All companies have bot ...

    Kentwood / Leadermac Moulders
    A message posted at WOODWEB's Solid Wood Machining Forum (4/4) -- I am looking for people that have had experience with Kentwood or Leadermac moulder ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3) -- I wanted to chime in and say that the best thing I have found for this is to have w ...

    moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- I am looking for some help on how to make up custom hold downs after final top he ...

    Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- I read a letter recently that suggested that machining flooring through a moulder ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- I also wanted to add that when feeding the moulder upside down, the feeder has to ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/30) -- Bill, It was 3 setups for that. Cannot remember now what it was, I think a interior stool ...

    SCM multi head moulder information
    A message posted at WOODWEB's Solid Wood Machining Forum (6/30/24) -- Hi, first time posting so not sure if I am in the right section..... I have rec ...

    Splitting on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/30) -- I am just looking for some advice on using a splitting saw on a moulder. Is there ...

    moulder head balancing
    A message posted at WOODWEB's Solid Wood Machining Forum (1/30/24) -- Is there a company that balances moulder heads? thx in advance.. ...

    Oh Crud!
    A message posted at WOODWEB's Architectural Woodworking Forum (5/29) -- Does anyone else ever have this problem? While running mouldings on our mould ...

    Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/29/25) -- Looking for some feedback, we are setting up again after losin ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/28) -- I milled face down on both push feed type and feed through moulders. The better th ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Chuck Yes, these can be used on both a moulder and shaper. Paul did a great j ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/28) -- Yeah, I have never heard of a moulder where the bad plate after the last bottom di ...

    resawing moulder blanks
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Hi all, We mainly deal with reclaimed wood, and we have a Baker ABXX horizontal resaw ...

    William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I have been looking for a used William and Hussey moulder, I have noticed that there are ...

    Re: Issue with Techniks Aggregate Head – Excessive Heat & Noise After 10–15
    A message posted at WOODWEB's CNC Forum (8/26/25) -- I have only had two machines with a horizontal head. Both Northwoods. The first one was a moulde ...

    Re: Issue with Techniks Aggregate Head – Excessive Heat & Noise After 10–15
    A message posted at WOODWEB's CNC Forum (8/25/25) -- Osvaldo, One of the big advantages of a horizontal head is with a dedicated spindle you can run ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- "I'd imagine you displace the bottle neck, and end up in a bit of a chase- ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Cab Maker It is the wood chip that creates enough air flow that actually keeps the ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- A couple of years ago this question or a similar question came up and I suggested glue st ...

    insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I purchased a shaper and with it came quite a few cutters. Some I believer were fr ...

    Re: Sintex moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Can you post up a couple of pictures? I've only done belts on my Compact 23 moulde ...

    Re: Reverse Table Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (7/23) -- Adam I'm drifting from the original question but I have to ask , how do you d ...

    How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/22) -- Sorry, This is a question more out of simple interest more that anything. I, no ...

    Re: Jobbing out stair treads
    A message posted at WOODWEB's Architectural Woodworking Forum (3/23) -- A professional mill shop with the proper setup will blow you away with how fa ...

    Sintex moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I have an SCMI Sintex moulder and the drive belts are starting to fray. I am looki ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Russ, do you have any experience with "Weinig Spiral Insert Hydo Heads" ...

    Free Webinars
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- Join NHLA and the "Wood Doctor" Gene Wengert for a 3-Part Webinar Series ...

    Free Webinar by the Wood Doctor
    A message posted at WOODWEB's Adhesives Forum (9/22) -- Join NHLA and the "Wood Doctor" Gene Wengert for a 3-Part Webinar Series on Finishe ...

    Repairing urethane feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- The cost to repair a set of feed rollers on a wide belt sander was nearly $800. Ha ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- When I run a moulder with 2 rights heads I use two different methods of running T& ...

    Machining Curved Handrail
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- We have a 6 head moulder We have a Mikron moulder. We have the ability to make arc ...

    Re: Weinig 1200 6 head moulder
    A message posted at WOODWEB's Value Added Wood Processing Forum (5/21/25) -- These problems are usually a simple fix. More often than not there is di ...

    Re: Salvaged Lumber
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/21) -- If you have chrome bed plates and insert carbide tooling, be prepared for a ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/20) -- You are right to be concerned. If management doesn't care enough ...

    Shaper or moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (4/20) -- Dont get excited. My decision to make is do I get a shaper with a head that c ...

    Re: moulder chip recirculation
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/20) -- I haven set up/run a moulder in a number of years, however I have ...

    Re: RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (11/19) -- Has anyone ever used an Ionizer to combat static while machining PVC on a cn ...

    Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- I recently purchased a Wadkin six head moulder with two right side heads and only ...

    changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- Anyone out there know how to switch my 1984 p170 5 head moulder from 440v to 220v? ...

    change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- I have a1984 Scmi 5 head moulder that I need to change from 440v to 220v. Any one ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/18) -- You can calculate that. Multiply cutting knives( non jointed 1) x spindle rpm and ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/18) -- Chas Lock miters can be tough especially in longer lengths, machining of both joints is criti ...

    dominion midas moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- restoring 1987 5 head moulder. 1 spindle appears to need new bearings, so anyone ...

    moulder chip recirculation
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/17) -- Hello, I am posting this here to inquire as to if any other exper ...

    Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Using a 5 head Leadermac moulder and wanting to not use last bottom head. The bed ...

    Re: 4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- We are looking into this as well and we need to run 4/4 walnut which has been ripp ...

    Re: feeder on the jointer
    A message posted at WOODWEB's Cabinetmaking Forum (11/14) -- Before we had a SLR and moulder for S4S, I had a pair of jointers with power feeds. one ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- You've asked just enough questions to fill an entire book. Sounds as if you have z ...

    moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- Hey guys, just read posts oncutterheads but here's my situation. Just bought an ol ...

    RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/13) -- Has anyone ever machined PVC on a high speed moulder? I have some questions r ...

    Re: weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Keizzer It is typical for 1/4" over on the width and 3/16" on the thickn ...

    Re: 52 degree angle on table saw?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- my first thoughts are: Woodmaster moulder or Williams & Hussey (ShopFox ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Honestly for that small of runs I would get a woodmaster moulder planer. I had 3 o ...

    Door Making Process
    A message posted at WOODWEB's Cabinetmaking Forum (5/12) -- After buying doors for 20 plus years, I am going to start making them again. I'm investin ...

    Re: Door Making Process
    A message posted at WOODWEB's Cabinetmaking Forum (5/12) -- If you have a moulder wouldn’t you make the inner profile on the rail stock not just S4S? ...

    Re: BENZ Aggregates
    A message posted at WOODWEB's CNC Forum (3/12) -- I have 5 aggregates(two of them new) and 3 old ones. Of the old, 2 are Benz. I have a single output ...

    Re: moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- In theory, yes. But if the rips you're feeding it are twisted, wavy, or badly bowe ...

    Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- Is any one using the quick lock moulder head. Would like to hear some input on thi ...

    3 phase rotary converter for weinig p22 & dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- need info on sizing & installing 3 phase rpc for weinig p22 5 head moulder &am ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/11) -- Agreed on already posted suggestions: * Get a Weinig. Period. * Don't skimp o ...

    Re: Table saw vs. Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- Before we had an SLR my partner and I would have contests at the jointer/table saw ...

    Re: Who make of sell the moulding head
    A message posted at WOODWEB's CNC Forum (9/10) -- Google ISO 30 1 1/4" arbor and you will land on a bunch of arbors you can mount a corrugated h ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- It really depends upon what you are using for a moulder. If it is a full blown mul ...

    6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi everyone! Hoping you can help! I’ve been working with a wadkin 6 head moulde ...

    6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi everyone! Hoping you can help! I’ve been working with a wadkin 6 head moulde ...

    4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Seeking a user manual and parts manual for a 226 Mattison 4 head moulder with tilti ...

    moulder parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- I have a powermatic moulder with a two knife head, i cannot find the gibs that hold ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (4/7/25) -- I'm not a moulder guy so can only comment based on my experience with planers. E ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/7/25) -- Marty, You must have HSK spindles on your moulder. I too didn't know what y ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/6/22) -- Dave I question weather a steel plate has the ability to absorb any vibration. P ...

    Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/5) -- What is the purpose of a reference engraver on a moulder? ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/26) -- Another suggestion is to contact Stiles Machinery. They sell Kentwood moulders w ...

    Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/5) -- Bringing in our first (used) multi-head moulder to run stock for ourselves only. No ...

    4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- We are a smaller company which sells lumber and we want to process rough cut lumber ...

    Re: aggregate durability
    A message posted at WOODWEB's CNC Forum (1/4) -- John, Not sure Onsrud is any better than Anderson, but my experience is with Northwood and I would r ...

    Re: SCM Planer volt conversion 440v to 220v
    A message posted at WOODWEB's Cabinetmaking Forum (3/3) -- As Mic said, it's likely just a matter of switching the wiring in the peckerhead. Low & ...

    aggregate durability
    A message posted at WOODWEB's CNC Forum (1/3) -- Hi, I am currently researching cnc options for my shop and was wondering on the durability of aggreg ...

    Re: moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (4/2) -- Ideally, David's way is best: Get the faces peeled off and rough flattened before m ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/1/22) -- We rip thick stock over in width because of the “curl” you mentioned. It happen ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/1) -- How accurate of cuts are you trying to achieve? A gang rip generally won't do that ...

    Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/1/25) -- Hello we are looking to invest in a clamp force tester to test our moulder ...

    Weinig P1000 12000 RPM Moulder
    A message posted at WOODWEB's WOODnetWORK Forum (4/1) -- We have 2 Weinig P1000 Moulders. We are having issues with raised grain when we apply paint ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/31/22) -- I am taking 4,000 lineal feet of redwood 1x8 to a shop for one-pass S4S T& ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (5/31) -- Ordered swing arm from grizzly looks like the fox moulder is longer ...

    Re: Wadkin GD5 Moulder Operators Manual
    A message posted at WOODWEB's Solid Wood Machining Forum (6/30) -- Hi Michael: We have a Wadkin GD Instruction & Spare Parts manual available tha ...

    Re: Weinig Moulder models
    A message posted at WOODWEB's Solid Wood Machining Forum (6/28) -- Can someone please recommend the best moulder brand/model for moulding Ipe decking ...

    Super thin saw blades for Leadermac Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/28) -- Looking for feedback on using super thin saw blades on a Leadermac moulder to rip ...

    Which low-cost Spindle Shaper/moudler
    A message posted at WOODWEB's Solid Wood Machining Forum (3/26) -- I have zero knowledge about router and shaper/moulder. Budget: AUD 2000-AUD3000 Ma ...

    Re: Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- There are a couple of options. You can check with you machinery agent to see if th ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- Chris, Just wanted to add to your question about “entry level” Weinigs. Our sho ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- Thank you, Paul. I have actually been in the cabinetry and woodworking busin ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- Kent I am glad you found the problem, I too have seen this issue many times, peopl ...

    Re: Any Moulder Runners?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/18) -- Not that machine in particular but moulder bearings can be a little tricky. U ...

    Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I have a Unimat 218 6 head moulder that I am having a lot of trouble with chatter. ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Hello Chris There are advantages to having more than two pockets on a cutter he ...

    Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- I need a moulder to run custom flooring and decking at a small lumber mill. Max o ...

    What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (4/14) -- Dear professionals, Please share your suggestions on best method to re-sharpe ...

    S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- I'm new to shopping for an S4S moulder. Can anyone answer me 2 questions and maybe ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- When I prepare material to glue on a moulder, I will generally run the feed a litt ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I don't make panels anymore, but when I did I used the moulder to prep the blanks ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/12) -- Dust collection, dust collection, and did I mention dust collection. Of cours ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/11) -- 30 years ago i started matching mouldings for clients with a 1/2 shank router ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Jason, The best edge prep for an edge glued panel is a ripped edge coming off of a ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/10) -- Mike I could be of help to you in your quest for moulder information before y ...

    Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/9) -- I am considering investing in 5 head moulder. Any and all help would be apprec ...

    Re: Moulder question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/8/23) -- Hi Chris, We have a13 year old 12" wide Leadermac that came with the rabbet ...

    Moulder question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/7/23) -- How many of you running moulders have the rabbeting cutter on your first bottom ...

    Need Help With Hold Down On Weinig Unimat Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/7/26) -- Hi, I have a 1998 Weinig Unimat 23E six head moulder. It has two top heads on it ...

    Kentwood Moulders 609HD
    A message posted at WOODWEB's Architectural Woodworking Forum (7/5) -- Dose anyone use a kentwood moulder? Is their quality any good ...

    Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/5) -- I am looking to replace a 5hp Powermatic PM2700 that I have never been happy with since th ...

    Re: Second Moulder Choice
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- I know nothing so take this as a question. If you do many short runs is running the ...

    Re: Weinig Moulder models
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- Bill Jot down the e# on the machine, (tag on moulder) call Weinig, give them that n ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (9/3/24) -- Bill has it right. Just add an automatic dust gate to the system. It can come on ...

    William and Hussey Moulder Chicago
    A message posted at WOODWEB's Solid Wood Machining Forum (4/3) -- I am looking to borrow a William and Hussey moulder in the Chicagoland area for a q ...

    Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/3) -- I was wondering if there was any dedicated moulder software out there to help the s ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (1/2) -- Thank David and Paul. You both "hit the nail on the head". I persona ...

    Re: Super thin saw blades for Leadermac Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- Jeremy do you have a 5 or 6 head moulder? If it’s a 5 head you would run your blade ...

    Quicklock Terminus Style Moulder Head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- I have a Terminus style moulder head that has insert planer knives, and pockets to ...

    Scraps
    A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- Other people who run moulders for mouldings, what are you doing with all the wast ...

    Re: weinig rebate cutter, advantage? removal?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- So it really just helps with a few inches of support? AFAIA US sold weinig moulde ...

    Re: Nice appliance specs
    A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I had an old turquoise refrigerator once. It was so worn out that one day while eating lu ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- Russ is right on This is the best case scenario as in going from low to high volta ...

    Weinig 1200 6 head moulder
    A message posted at WOODWEB's Value Added Wood Processing Forum (12/30/24) -- Hello. I have a question on our weinig 1200. On the #6 bottom it seems ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- Aaron There is no right or wrong way to mill flooring or any other type of mouldi ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- Aaron In response to your second post which I forgot to address. The operator sho ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/30/21) -- Thanks guys! I should have it running in a week or so once power is hooked up. ...

    weinig rebate cutter, advantage? removal?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/30) -- Hi. My moulders first bottom head has a rebate cutter installed. The head is a fu ...

    Re: Office to Shop employee ratio
    A message posted at WOODWEB's Business and Management Forum (8/30) -- We do 99.9% in-house. Mostly moulding and wide plank flooring, some stair tread ...

    Re: changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/30) -- Changing from 460 to 230V will require the replacement of the breakers as well as ...

    Re: what is the name of this machine?
    A message posted at WOODWEB's CNC Forum (4/30) -- Looks like it's probably done on a moulder. ...

    Re: Uses for hardwood waste
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/30) -- Thanks for the response. We are located in Superior, WI. Currently, we have ...

    Re: Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/30) -- "Jake, the machine is 1000's of miles away and with our work load there is ...

    Re: Solid wood drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/29) -- We use all solid soft maple at 5/8 thick. All dovetailed in house. All material comes in ...

    Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (11/29) -- Yes, I know this is a woodworking forum... We are working on a project where ther ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (6/29) -- I am kind of surprised that no one is telling you not to use these knives wit ...

    Re: OH CRUD!
    A message posted at WOODWEB's Architectural Woodworking Forum (5/29) -- I have three moulders and had to walk out and look at the fences because I ha ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/29) -- You’re right Mel (That Hurts!), I did mistakenly confuse you with the character in ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Dave What are the RPMs of the machine? Twenty feet a minute may need to be adju ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Dave It almost looks like that fence you have the ruler on in the pic is the fe ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Yes - have a very flat ground bar and I set the cutterhead/bedplate so that the ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Dave I think I see the problem, The knives look very dull. The motor will still ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- That's a good idea on the rebate cutter, I think new knives will be a big help. ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Ok. Checked rebar cutter and all good radial and lateral. Made a slight alignme ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- I have a question that may sound a bit off but I want to check to make sure its ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Dave Please check with the Manufacture on the size of the rebate inserts. If th ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Russ I think I have the side rebate cutter aligned well now. Nice smooth cut on ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Dave Would you please provide a pic from the infeed of you machine, I would lik ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Thanks Russ. I will go over those points with it today. The articles are very h ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- The vertical cutter on the rebate cutter should lightly touch the straight edge ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- Is the air pressure on the feed rollers 40lbs? Is there a star knob on the firs ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- One more thing, I have top hang the knife top the right on the joint head like ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/29/22) -- 2 pics wheels on and off. ...

    Re: veneer sizing
    A message posted at WOODWEB's Veneer Forum (11/28) -- Not enough info for a good answer. Are you gluing up 10 pieces of .6mm veneer to get your 6mm t ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/28) -- Advice that a 226 requires a 5lb hammer to adjust isn't overly accurate. There are ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/28) -- Thanks for all the replies I was able to get this set up and we ran our first 2 ru ...

    Re: Diehl Molder Hold downs
    A message posted at WOODWEB's Solid Wood Machining Forum (7/28) -- Those are both Diehl and Diehl is still in business. Call and ask for Dick Meldrum ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (7/28) -- We do these a couple different ways. Using the outboard fence we run one side ...

    Re: Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (6/28) -- What is the best knife angle for moulding dense tropical hardwoods like Ipe, Green ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Good information from Paul but with one minor oversight. Making grinding temp ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Thanks for input guys. There are a lot of longer knives than 4 inches so mayb ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Chuck These knives appear to be ground at 12 degree hook angle. When you purc ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/28/23) -- Hi Dave, Did you ever find an owners manual for the 226? ...

    Hearing Protection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/28/22) -- I did notice in the shooting community new hearing protector's ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/28/22) -- Thanks for the pics, that helps take us to the next stage. Tell me a little abo ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/28/22) -- More info. It seems the edger unit is making the wood jump. The edger corner al ...

    Re: resawing moulder blanks
    A message posted at WOODWEB's Sawing and Drying Forum (1/28) -- It seems to me that the question you are asking is "How do I get a flat referenc ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/27) -- Cabmaker brings up some valid points. We have to figure out what makes us rum more effic ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/27) -- i have been working with reclaimed lumber/beams for 9 yrs. new lumber for total of 20 ...

    Need New Business Ideas
    A message posted at WOODWEB's Business and Management Forum (7/27/24) -- Hello members, I have the following issue, we are needing to add more servic ...

    Wadkin
    A message posted at WOODWEB's Architectural Woodworking Forum (6/27) -- Hey all. I just bought a ga series moulder and want to switch it to high volt ...

    Wadkin
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- Hey all. I just bought a ga series moulder and want to switch it to high voltage. ...

    Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/27/22) -- If I have a vertical cutterhead in a moulder with a 20 degree hook cut angle wi ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- These are typical for knives used on molders. Normally, you would have plasti ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Are you asking the question on time based on the machine positioning itself. I hav ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- You can run those on a shaper , the tallest cutter I feel comfortable running ...

    Re: Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- Dok I written a few brief but helpful articles on this subject I have attached bel ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I don't mind running panel staves S4S rather than just gluing off of a saw. It makes it ...

    Re: dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- Yes give Russ a chance for doing any drawings template and of course knives. His ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I’m with Larry, it’s hard to beat a good shaper for short runs of moulding. We have a S4S ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/21) -- Thanks for your responses. Just to be clear, (not that it makes a differen ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Russ,sorry for the delay on the response but everything has been checked out and c ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Jumpers: The motors should have plates that show which winding leads need to be ti ...

    Raimen saw programming?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- Hello all! I'm wondering if anyone can tell me if there is any way to create a sep ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- I wouldn't look at this as David is an old world craftsman and some guy using ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/26) -- Hey I just looked at your web address now, I'm just down the river from you in Ottawa. On ...

    Re: Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/26) -- Dok, for the most thorough answer, you should look in the knowledge base. Just typ ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/26/22) -- There could be a few issues creating what you are experiencing. Try checking th ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/25/21) -- We are using a shop made mini gang rip- a 5hp table saw with a custom arbor wi ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/25/21) -- This also looks like a Weinig Quattromat. A basic S4S molder that could do T&a ...

    tearout issues
    A message posted at WOODWEB's Solid Wood Machining Forum (10/25) -- Im having trouble with tearout on hard maple on a weinig moulder. Currently using ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/25) -- Cabmaker 1 - Yes, you are correct 2 - Then you get into horse power of the motors, ...

    Re: Does gang ripping make straight boards?
    A message posted at WOODWEB's Cabinetmaking Forum (8/25) -- Here is what I used to make straight blanks to run through my moulder. The sawmill I boug ...

    Re: moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (6/25) -- I'd guess the first question concerning the heads you have is can you get the gibs ...

    Seco counters
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Source for seco counters for moulder?? ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Excuse my ignorance as I haven't run a moulder but could there be any chance of waxilit c ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Hi Dan: I agree with Jeff to run any of the bigger heads on the 9hp Wadkin. My gue ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- After more review and measuring with a micrometer I discovered most of those that ...

    Moulding line
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25/24) -- What is the best avenue for selling my entire moulding operation? I am going to ...

    Moulding Red Gum
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24/23) -- Does anyone have experience machining red gum? running a weinig moulder at 800 ...

    Re: moulder parts
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- What size are you needing? I might some used ones Dave Rankin ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- You need a straight-line rip saw, and a minimum of a 4 head moulder. Both ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- I could well be wrong, but I don't believe you can get a Powermat without NC contr ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I never knew that Ingersol Rand or Quincy were bottle of the barrel junk brands ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/24) -- I've been through all of this during the past three years and bou ...

    New Dust Collection Design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/24) -- We are moving to a new shop, approx 12,000 sq ft. and are looking ...

    Wadkin GD5 Moulder Operators Manual
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24) -- We just purchased a used Wadkin GD5 Moulder at an auction that did not have the op ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/25) -- Hey there! Congrats on completing the trans swap on your Bel Air. The issu ...

    Re: Composite lumber staples? Non-pneumatic?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24/25) -- We have the Raptor system. Note that while the staples are "softer" t ...

    Re: Shaper or moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Well, I have never used a shaper to run moldings. I bought a Weinig six head ...

    Production shoe moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/24) -- Looking for ideas on best setup to run shoe moulding on a moulder. Material w ...

    Re: Production shoe moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/24) -- How many LF at a time are you talking about and what kind of moulder do you h ...

    Re: Knife grinding
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/26) -- I’d be cautious doing that. The hook angle affects how the knife presents to th ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- It could be a couple different issues. My first guess is your moulder cannot hold the tol ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I would say it depends....if the heads are on the smaller size bushings should be ...

    Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I mould red oak, so I already have the knives set in the 15 degree slots in the cu ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Dan On Page Thirty-four of our tooling catalog are the sizes we carry and prices. ...

    Scratch marks on douglas fir
    A message posted at WOODWEB's Architectural Woodworking Forum (2/24) -- After I ran this stock through the moulder this scratch appeared. I tried to ...

    Re: 1 glue line or two ?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/24/22) -- 2 layer laminations for door stiles is a bad idea. It’s ok for shorter par ...

    Re: Box Beam Construction
    A message posted at WOODWEB's Architectural Woodworking Forum (1/24) -- I did 2 jobs last year that needed long styles & rails, I used a 12-1 rat ...

    Re: Hoffman Dovetail Keys For Moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (12/23/21) -- Mitered moulding corners large and small is about all it gets used for in ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/23) -- I too do not want to be only negative. But as 'helping hand' stated. The wood ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/25) -- Each end should have a grease fitting and a pressure relief fitting. Depending ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/21) -- You need to check the maximum swing of each head, what you can cut and find th ...

    4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/21) -- I know very little about boulders but we bought this one. It came with an addi ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/23) -- I have one of those old Craftsman heads that I have threatened to throw away a million ti ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/23) -- I have gotten some great advice from my saw and tool shop Vexor. I am now grind ...

    Re: Corrugated Shaper Head
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- They have all kinds. 12 degree on their dual angle heads15 degree on standard moul ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Older moulders that use square cutter heads ...

    Re: weinig end snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23) -- Sounds like the feed system is trying to force the material away from the inside f ...

    Stacking sticks
    A message posted at WOODWEB's Sawing and Drying Forum (3/23/22) -- We operate a manufacturing plant for custom wood flooring. On site we have a small ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Hi Seth, I am with technical support @ Leadermac. If you remove the last bed plate ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Seth, I did not see the thread where you said you looked for the shim. Give me a c ...

    Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- We have a Raimann gang rip with the Quick Fix arbor. The saw came with 300mm x 28 ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- The choice of Power lock or Hydro lock is ultimately yours, my effort here is only ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- In my opinion I would stay with the regular feed rollers, they would give you a su ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Yes I have experience with that type of tooling, but as stated non jointed not for ...

    4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- We have a sicar 4 head Molder which we just got running. The pics show an odd p ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- It also looks like you need to check the side spindles for square, the cut in t ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- Oh! Perley, you are correct! I just remembered I reduced the right side cutter ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- Looks like not enough feed pressure and the board is stalling intermittently. ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- It looks like you aren't taking enough material off to remove saw marks. ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- I agree with the other comments as well. Worth considering the cost of sourcing the pa ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22/23) -- A moulder should give you some straightening ability on the first two heads. N ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22/23) -- Could your knife be hitting a bit after the edge due to too little back clearan ...

    Re: Headphones on the shop floor
    A message posted at WOODWEB's Business and Management Forum (7/22) -- Something's becoming obvious. At least some shop owners are capable of differen ...

    Moulding Mahogany
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/24) -- I've got an order for mahogany to go through our moulder and am looking for som ...

    Re: 3d printing slightly thin curved walls.
    A message posted at WOODWEB's CNC Forum (5/22) -- Thats funny we are purchasing an 3D SLA Printer for our shop to do some prototype , custom work, an ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22/23) -- On your 2nd pass try taking more off the top. This will relieve more stress on ...

    Re: 5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/22) -- I am in the same type of situation. We are architectural millwork with heavy commercial cabinets mi ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/22) -- Thanks, It will probably be 80%-90% faceframe cabinet work. I want some of the ...

    Re: bag vs cyclone dust collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/22) -- Straight from dc is 50 feet of wall. From this trunk line, I catc ...

    Re: Weinig P700
    A message posted at WOODWEB's Architectural Woodworking Forum (2/22) -- Thanks Larry, About the same situation. I have either 800a or a 1000a incomin ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Seems unusual to me, especially on the 2nd, but I am a Weinig guy. Dave would be m ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Thank you both for your response. My next question, the second right head has the ...

    Re: Machining Curved Handrail
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Jeb What about milling 1/4 of the round at a time like you do when you make a full ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21/25) -- Thank you all for responding. Yall are awesome!! ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21/24) -- Hello, I had the same problem with a moulder head. The solution I finally came ...

    Re: Planer Digital Read Out
    A message posted at WOODWEB's Cabinetmaking Forum (7/21) -- I second the Proscale, I have them on my planer and 4 on my moulder. Dustin ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- First, lets start by stating this should only be done by a qualified factory rep. ...

    Re: changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Thanks for the response, where would I be able to get the breakers and wiring diag ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Like Russ said - You need to find and replace all of the motor overload breakers w ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Consider a buck and boost transformer. I run a 440 volt CNC router from 208 volt 3 ...

    Re: changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Adrian, Go for the transformer, much less hassle. Mark ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Assuming the Shop Fox moulder still uses the same square head as their Williams an ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/21) -- The operator that lost his job ostensibly for getting injured has ...

    Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- I'm wondering if anyone knows a source for production standards on shop fox moulde ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Why not resaw off a bunch of the extra then run on the molder? Seems like that mig ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Thanks for the responses! Happy Father's Day!!! ...

    pricing moldings/s4s/flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- Hello Gentleman, I currently manufacture stairs, but looking to add another produc ...

    moulding none ripped material
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- My company has this idea to buy material that is cut from bolts and resawn to widt ...

    Re: Shaper or moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (4/21) -- We have a newer W&H (6-7 yrs), I am still amazed every time we turn it on ...

    Re: Experienced noob needs molder selection advice
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- The 22N is a good platform. Your challenge is finding one that's not worn to shred ...

    Re: Salvaged Lumber
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/21) -- We run reclaimed logs, beams etc. into flooring. We spend a lot of time wit ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20/25) -- You only need to pressurize one fitting, there are channels that run from one ...

    Re: Gang Rip Saws
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- Dave and David, The beauty of the moving blade gang rip is that you don't need to ...

    Re: price for surfacing
    A message posted at WOODWEB's Value Added Wood Processing Forum (7/20) -- Most places will surface a truck load of lumber, 15/16", hit or miss f ...

    Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/23) -- I am running a weinig unimat gold 6 head moulder and I am having issues with so ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/20) -- They refused to report the injury, owner said it was his fault, n ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/20) -- BGD, I believe NFPA 664 states that woodworking dust collection s ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/20) -- A real s---show. I hope they are shut down before somebody gets k ...

    Re: Shaper or moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (4/20) -- For the most part making small batches of molding the W&H will out perfor ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- If there is no shim, then there has to be some kind of adjustment on the casting n ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- Scott Here is an article on how to set up your moulder axial constant after your h ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- "Our problem with preplaned material was all the severe hit and miss." T ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- The short answer is you will generally put a straight tool on the first right and ...

    Re: Weinig Technician
    A message posted at WOODWEB's Architectural Woodworking Forum (1/20) -- CW Call Paul Hobbs. He helped me with my moulder. He has 30 years of experien ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Many moulders already have these built in to the bed plate roller assemblies, it ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- Hey Russ, We're finished running the job by feeding the pieces backwards, just ha ...

    Re: How often are you emptying your dust bin/bag?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/19/22) -- I agree with Gary about Briquette presses. It is a lot of mess ...

    Exterior hand rail finishing
    A message posted at WOODWEB's Finishing Forum (7/19/24) -- About 10 years ago before retiring from my curved moulding business I ran some 8' straight ...

    Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19/23) -- I have a T130NPS , cast slider. I have opportunity to buy a Heian tenoner. A he ...

    Re: Splitting on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- In general, yes, it's wood and it'll do that. The drying process is the culprit. I ...

    Review needed Nederman s1000
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/19/23) -- Was looking to see if anyone has feedback on the nederman syst ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Go to Mirror Reflections Website. Russ wrote a bunch of articles about moulder and ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- We always tried to get our lumber in rough. We ran a lot of thick moulding out of ...

    1/2" Ogee profiled beading/stick
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- How would I go about running a 1/2" x 1/2" wood beading on either a shap ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/19) -- The first pic is easy, just make sure you understand stepped cutting cause it’s pretty deep/thin in ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Good morning Dave! The fixture he's using is the 2 bearings on 1 side, and one on ...

    I am new here
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Hey all! I am new to this forum and just wanted to introduce myself. My future wo ...

    Cutterhead measuring
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18/24) -- I have a small Weinig moulder mainly for d4s. We do sometimes run profiles, but ...

    Re: Shaping 3/4 ply
    A message posted at WOODWEB's Cabinetmaking Forum (7/18/22) -- We use the magic moulder head works great for door panels etc. lots of different profi ...

    Re: Shaper or moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (6/18) -- So much depends on what you are to make and how long your runs are going to b ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/18) -- We baby ours. After glue dries an hour or so we scrape the excess off and let ...

    Re: OH CRUD!
    A message posted at WOODWEB's Architectural Woodworking Forum (6/18) -- Dale You might check the rebate cutter alignment, sometimes if your using a s ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18/23) -- I have never been able to detect burrs in my knife edge on the scope. I sure ca ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- You might want to check your rpm. Too slow will eat up a wheel fast. ...

    Re: Best cutter for solid white oak
    A message posted at WOODWEB's CNC Forum (4/18) -- Are you just milling a laminated blank to size to put through shaper or moulder, or are you doing p ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- We do need separate in and out feed fences, as most of the time we are actually re ...

    Re: moulder chip recirculation
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Are you referring to what we call 'chipbeat' - where chips ride a ...

    Re: Shaper head with dowel profile knife
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- 5 hp shaper, not on a moulder. 2 passes to make the dowel, second pass se ...

    Re: Weinig 1200 6 head moulder
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17/25) -- It sounds like the #6 bottom head is slightly out of plane. Check spind ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/25) -- You typically grease both outer fittings, as they service bearings on each end ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Circular sawn flooring is pretty much a hit or miss floor so side match..there wi ...

    Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Hi there! We make custom hardwood flooring (up to eight inches wide), and have be ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Typical cutter head hook angles on a Weinig moulder are either 12 or 20 degree. T ...

    Re: Lineal ft price
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/23) -- Nope. He'd charge $7 to run it through the moulder. I think his setup is $ ...

    Larch / Tamarack properties
    A message posted at WOODWEB's Value Added Wood Processing Forum (7/17) -- Does anyone have any experience finishing larch / tamarack (Larix laricina) ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I glued up on the thick side and calibrated going through the moulder hitting ...

    taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17) -- Guys, Any idea for knife marks per inch for running 5/4" premium decking out ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17/23) -- Are you using a scope to inspect your knives? I have found you can actually see ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- "We hand-plane and sand the face anyway" In that (or similar) case only, ...

    Re: Weinig 1200 6 head moulder
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/17/25) -- When Weinig techs train your people, things like this are covered thorou ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- 35 year Millwork veteran running everything from Diehl push feeds (square heads ...

    Re: Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- Thanks Rich. I was thinking about that - the internal coves would be relatively straig ...

    Weinig P700
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Is there anyone out there running a Weinig 6 head moulder that can tell me wh ...

    Re: Molder for reclaimed T&G
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- Alex A few things to think about, I would recommend you run the profile face down, ...

    Re: Rotary airlock on cyclone hopper?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/17) -- With the correct size air lock there should be virtually no build ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- ok. I mad some adjustments and changed out many hoses and cleaned out my return a ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- Woodmaster was one of my first thoughts as well, but when I spoke with them on the ...

    Re: Rougherhead
    A message posted at WOODWEB's Solid Wood Machining Forum (6/16) -- Your photo looks like the finish we get from a set of "rougherhead knives&quo ...

    Re: Tooling
    A message posted at WOODWEB's Architectural Woodworking Forum (6/16) -- I will second the Charles GG Schmidt. Been using them for years and even more ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/16) -- I would consider asking them if if it possible to get the molder ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Unless you have time on your hands that you can't find billable work for, I find t ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I also have a similar 5 head molder and I don't use the last bottom head either si ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I was hoping for a shim under the last 2 bed plates but no such luck. I'm just get ...

    Re: Sanding for stain or paintable products.
    A message posted at WOODWEB's Finishing Forum (2/16/23) -- That's my guess at gross sales last year, and does include finishing costs. I can't say as ...

    repair tech
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16/22) -- does anyone have any contact info for an industrial technician to perform a PM ...

    Re: Cabinet door production time
    A message posted at WOODWEB's Architectural Woodworking Forum (2/16) -- I had grand ideas of setting something up like a tigerstop using a couple of ...

    Rotary airlock on cyclone hopper?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/16) -- I have an outdoor cyclone on top of a 103 CU FT hopper. Currently ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/21) -- Did you get this up and running? Curious how you made out with it. ...

    Re: "Combed" wood
    A message posted at WOODWEB's Cabinetmaking Forum (11/15) -- Cabmaker Well here is an option for you in the link below on page 15 of our shared catal ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Gents, thank you all for your replies. Dustin, these do need to be accurate cuts a ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- A woodmaster might work. I don’t know if you can get to 1/2” with there blade setu ...

    Radiused Mouldings
    A message posted at WOODWEB's Architectural Woodworking Forum (8/15/23) -- We switched to carving curved and elliptical casings many years ago to get ...

    Dust collection safety requirements, bypass of moulder safety devices
    A message posted at dust (12/31) -- What is required of a newly installed dust collection system as in Spark detection back blast gates dampers etc L ...

    Re: Door Making Process
    A message posted at WOODWEB's Cabinetmaking Forum (5/15) -- I like to run full lengths for sticking, cut to length then cope. You should thickness, s ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/15) -- Sounds like your using a less expensive aluminum oxide grinding wheel, try using a ...

    Re: Jobbing out stair treads
    A message posted at WOODWEB's Architectural Woodworking Forum (3/15) -- Never say never. Every situation depends on the particulars. There are plenty ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- Be aware, OSHA requires anti-kickback devices when ripping multiples. I think a si ...

    Re: feeder on the jointer
    A message posted at WOODWEB's Cabinetmaking Forum (11/14) -- I guess a lot depends on the species and how consistently it is sawn. Sometimes when rou ...

    width markings for R2E
    A message posted at WOODWEB's Sawing and Drying Forum (9/14) -- We are currently looking at some ideas to help automate our processes when ripping ma ...

    new shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- anyone have an idea why some of the new shapers have a middle speed of 5000 instea ...

    Re: Small molders, Williams & Hussey, Shop Fox
    A message posted at WOODWEB's Cabinetmaking Forum (6/14) -- Matt, You can use the rest of your corrugated back knives and 1.25 bore shaper heads and ...

    I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- I make knives from HSS using an old SCMI knife grinder, with ceramic discs. Some o ...

    Re: RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/14) -- Thanks to all who have responded. Much appreciated Luke ...

    shop layout software
    A message posted at WOODWEB's Business and Management Forum (4/14) -- I am going to add a 9500 sq. ft. machine room to the cabinet shop. Is there any ...

    Re: Reeded Fronts
    A message posted at WOODWEB's Cabinetmaking Forum (2/14/24) -- I cut the beads on a table saw using a magic moulder starting from, either the center ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- This article may help you, the calculations are for industrial moulders but a shap ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14/26) -- Dear Alan, Dustin and Jason have pointed out two crucial areas: spindle bearing ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14/26) -- Did you get it figured out? What was the problem? ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Dave Both Weinig and Quick lock are quality built cutter heads, we offer both styl ...

    To End Match Or Not To End Match
    A message posted at WOODWEB's Architectural Woodworking Forum (12/13) -- Hi, I am going to soon start milling 3/4" solid red oak flooring in a 6 ...

    Re: Finding/building a new facility
    A message posted at WOODWEB's Business and Management Forum (12/13) -- Shaun, thank you for the reply. There are places available with adequate acces ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/13) -- We glue up some times right out of the S4S T 90 moulder. The side head is basically a jo ...

    Re: laminated solid oak slat panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/13/22) -- I consulted on a job similar to this for elevator panels only the bac ...

    Re: Dust collection hose
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/13) -- Scott, A 20 mil thickness urethane hose should work well. Will no ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13) -- Hey JB, Could you elaborate on why you prefer it over Wienig and what other costs ...

    Re: RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/13) -- I've run a bit of Azek. T&G mostly with a bit of profile work. Dust: it g ...

    Re: Uses for hardwood waste
    A message posted at WOODWEB's Value Added Wood Processing Forum (5/13) -- KD you have some of the hardest species to grind up. I'd make dowels on the ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Thanks for the response. I'm trying to decide between the quick lock head and wein ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- I actually don't use those but they would be for resetting to a dimension that you ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Dave Here are a couple of drawings of the the profile I was talking about over the ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Russ, Thanks - I appreciate the info. Pretty much the same concept as the CombiHea ...

    Pricing Lineal Mouldings
    A message posted at WOODWEB's Business and Management Forum (5/12) -- We are a high-end millwork operation and get requests for reproduction and cust ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- I think it would be too unstable coming off the end of the moulder machine milling ...

    Re: Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- The Weinigs and other moulders I am familiar with all have locks that are loose ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- Before I sold out of a cabinet shop, I had already bought a molder to start mak ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- I ran a couple molders like those many years ago. As I recall, a 5 lb hammer was a ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Hi Thanks for the reply - I will purchase the 5 pound hammer if someone that under ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Definitely not "as successful" with a single head planer (assuming it's ...

    Re: Soft v hard maple for doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/12) -- We did soft maple for quite a while for door sticking, and have switched to beech. Seems ...

    weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- The company I work for has 2 weinig powermat 1500 moulders and we are concerned ab ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- I like the original. Just about a 1500.00 spread and I just don't use mine often e ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Why not buy the original, the WH? You wouldn't be asking these questions. ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- thanks Jim ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- I have 5 of these heads, love them. I have one of these on the last bottom head th ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11/25) -- Alan, I have had a dull top head give me this showing up on the last bottom fi ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11/25) -- You can contact Weinig to attend their classes on molder training. Different m ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/11) -- the trick with these doors is to glue the planks to the frame but not to each ...

    Re: Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/11) -- I would buy an SCM in a heart beat, you may have issues as most are 3 phase, however they ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/23) -- On my Martin four sider planer moulder they instruct along the same lines Fred ...

    Re: edge gluing
    A message posted at WOODWEB's Adhesives Forum (2/11) -- We do a lot of this type of job, we run the boards trough the moulder with glue line cutter h ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- I've had one around 5 years or so. Good for radius and small runs. Production runs ...

    shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Is anyone using the new shopfox molder similar to the Williams hussy in a small sh ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Does the shop fox produce clean molding without knife marks. Do the rollers hold u ...

    Re: feeder on the jointer
    A message posted at WOODWEB's Cabinetmaking Forum (11/10) -- A moulder would certainly be faster if you have the space, dust collection, etc. There's ...

    Knife grinding
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10/23) -- Do knives need to be ground in a head that is the same hook angle as what will ...

    Re: Bag House Retrofit to Larger Bags
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/10) -- We are running a 3-head 52" sander, a 2-head 42" plane ...

    Who make of sell the moulding head
    A message posted at WOODWEB's CNC Forum (9/10) -- Could anybody tell me who make or sell the moulder like head that fit into a iso 3o toolheader like ...

    Re: Cleaner Air
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/10) -- Your asking some good questions. Actually I'm thinking these are ...

    Re: Lean Manufacturing article in Woodshop News
    A message posted at WOODWEB's Business and Management Forum (4/10) -- "I agree on the micro time keeping thing, it just is not worth it. However ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- You can also try posting this on the OWWM forum. Lot of people there knowledgeable ...

    Re: Profit/Loss for 2015....How did you do?
    A message posted at WOODWEB's Business and Management Forum (3/10) -- I guess I should point out that our product is 100% solid wood edge glued panel ...

    Re: Software solution for cabinet door business
    A message posted at WOODWEB's CNC Forum (3/10) -- No I dont need to input orders at excel, I just need at least the same functionality that excel pro ...

    Re: Looking For A Wood Products Manufacturer
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/10) -- I see there are two people who have said that they may be able to help you. ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Im sorry I should have been more specific. It is a six head moulder with bottom fa ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/10/25) -- It sounds like you guys have been through a lot of difficultie ...

    Re: DIT insert shaper cutters
    A message posted at WOODWEB's Cabinetmaking Forum (2/10/25) -- The company that I have worked with for all of our insert tooling for both the shaper ...

    Waste Disposal & Collection
    A message posted at WOODWEB's WOODnetWORK Forum (2/10) -- I’m certain this question has been posted here so many ways so many times. However, I’m sta ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi Dustin, No Jambs, however I was doing some tests this afternoon and can hear ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Yes on checking the belts but I would pull them off and free spin the spindles. ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Looks very evenly spaced about every inch or so? Need to check the spindle bear ...

    Re: Vacuum fittings
    A message posted at WOODWEB's CNC Forum (12/9/21) -- The vacuum holding strength is good enough to run the moulder on a part, but I will test tomorro ...

    Re: Bag House Retrofit to Larger Bags
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/9) -- One question.... what machines are you running? and what amount o ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/9) -- In Illinois, there is a free safety program operated by the state. ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Hi Dave, looks like you need somebody that has worked a lot on old mill planers and ...

    Software solution for cabinet door business
    A message posted at WOODWEB's CNC Forum (3/9) -- Hi, We manufacture 5 piece wood cabinet doors. We input the data into excel, which produces a BOM fo ...

    How would you groove these toe boards?
    A message posted at WOODWEB's Cabinetmaking Forum (1/9/23) -- We're looking to lean up/improve the way we groove our toe kick boards. We use leg leve ...

    Re: How would you groove these toe boards?
    A message posted at WOODWEB's Cabinetmaking Forum (1/9/23) -- You can get carbide knives made for a Hussy, The carbide is brazed to knife stock. We u ...

    Re: Looking for lathe work
    A message posted at WOODWEB's Architectural Woodworking Forum (1/9) -- I have never heard of a woodturners' club. This is the back of beyond... Your ...

    Central dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/9) -- Dear We are having a central dust collection with 1 engine (15kw). ...

    Help identify high precision spindle bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- 7913ctrdulp4y 7210ctrdulp4y Nsk bearings What weinig moulders are these compatible ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/8/25) -- Yes. Sorry guys we have HSK spindles. ...

    Re: Fixing Panel Cracks
    A message posted at WOODWEB's Architectural Woodworking Forum (4/8/24) -- Hi Christopher, We build panels up in several ways depending on style, grai ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- The rebate cutter and associated fence in theory act as a jointer to provide a stra ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- Whoops, I see Russ already posted the link. ...

    Re: moulder head balancing
    A message posted at WOODWEB's Solid Wood Machining Forum (3/8/24) -- Newbie molder operator here self trained.How could you tell if your heads were n ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/8) -- Not to take away from Russ' article, but for MOST purposes, we have found that the ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/8/22) -- Is this machine running v belts to the cutterheads? Maybe look at putting a segm ...

    Re: Tool grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/8) -- Bill In order to make in house tools you will need: Cutoff saw to cut the steel Bal ...

    Dust Collector Help Needed
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/7) -- Hi, I have an older Torit Donaldson "Mic" model dust co ...

    NFPA 664 Compliance
    A message posted at WOODWEB's Business and Management Forum (12/7) -- I posted this in the dust forum as well, but that doesn't seem to get anywhere ...

    The Reality of NFPA 664
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/7) -- I'm curious how others out there are handling NFPA 664 compliance ...

    Shop rate, calculating, again?
    A message posted at WOODWEB's Business and Management Forum (8/7/23) -- Hi guys I know this has been beaten into the ground on other threads. I can s ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/7/25) -- A clamp force tester tests the drawbar clamping force. For the spindles to ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/7/25) -- What exactly is a clamp force tester, and why do you need one? Weinigs are ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7/25) -- Alan, My briquetter output is right around 280 lbs per hour. On ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7/25) -- Thanks for the input, really, been hard to get volume informati ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7/25) -- Alan, In my last post, I posted a link to my website. Click the ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7/25) -- Mark, what do you do with your briquettes? . ...

    Re: Whitney Planer Slipping With Yellow Pine
    A message posted at WOODWEB's Solid Wood Machining Forum (2/7/24) -- Leo, I'm not a fan of putting sappy wood through my wide belt either. It just gu ...

    How to count capacity of the dust collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7) -- Hello, I have problem right in improving suction from my machines( ...

    Re: Brush sander
    A message posted at WOODWEB's Architectural Woodworking Forum (1/7) -- Tom, That looks really good, I looked at the Makita as well, but couldn’t find ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/7) -- I researched the same thing recently and could not find a book or tutorial. The lin ...

    Re: Oliver 4920 SLR
    A message posted at WOODWEB's Solid Wood Machining Forum (12/6) -- A SLR that has not been maintained to hold glue line tolerances will still cut mol ...

    Re: weinig rebate cutter, advantage? removal?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/6) -- Craig what Wienig moulder do you have? ...

    Re: Considering Taking Doors / Drawers In House
    A message posted at WOODWEB's Business and Management Forum (8/6) -- It takes a lot of equipment to build 5 piece doors, even in a small shop. Most e ...

    Re: Considering Taking Doors / Drawers In House
    A message posted at WOODWEB's Business and Management Forum (8/6) -- Im in Rich's camp on the sanding. Doing anything today where your work has to be ...

    Re: (one man shop) Questions and Machinery Needed For a New Cabinet Shop
    A message posted at WOODWEB's Cabinetmaking Forum (6/6) -- oh man, Oggie nailed it. 1. I started with a tablesaw, 6" jointer, 15" planer, a ...

    Re: house doors
    A message posted at WOODWEB's Architectural Woodworking Forum (6/6) -- If you have a tennoner that has cope heads, a fairly automatic mortiser like a ...

    Re: house doors
    A message posted at WOODWEB's Architectural Woodworking Forum (6/6) -- mark , i've been doin this for a while , have 6hd moulder 3' planer , gangrip ...

    Re: Experienced noob needs molder selection advice
    A message posted at WOODWEB's Solid Wood Machining Forum (4/6) -- Hello Tim First of all you're not crazy. Make or model is strictly your choice, alt ...

    Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/6/23) -- We swapped out the old bearings on our moulder spindle and the outboard, pully e ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/6/22) -- Problem solved!! Out of balance pulley on main motor. Was shaking the whole mach ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/6/22) -- Excellent Dave Good sleuthing, Its been real. All the best Russ @ MR ...

    Needing Help With Torit Dust Collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/6) -- Hi, I have an older Torit Mic model dust collector. It has filter ...

    Re: 4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/6) -- If you are wanting to run mouldings as well, then a good used Weinig or SCM will do ...

    Re: 4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/6) -- Hello Merkur, Can you please email me more specific about your needs and what you w ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/6) -- Neither although I assume the setups/settings would be similar. I'm not looking for ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/6) -- Weinig and SCM have training. Is your new/used machine one of those? ...

    Re: ERP for a moulding shop
    A message posted at WOODWEB's Business and Management Forum (12/5) -- Have you looked into lean systems instead? It seems to me that if Toyota can ru ...

    Re: Band/Resaw Recommendations
    A message posted at WOODWEB's Architectural Woodworking Forum (12/5) -- I have an SCMI 36" saw with a 10HP motor that we use to centerline split ...

    Re: Wood Moulding Matching Sample (Standard)
    A message posted at WOODWEB's Architectural Woodworking Forum (11/5) -- Hello Russ! Thanks for your input. We had discussed this idea here at the sho ...

    Re: What is "normal" tooling style for Weinig molders
    A message posted at WOODWEB's Solid Wood Machining Forum (11/5) -- Corrugated knifes are the most common type of tool for in house grinding. The use ...

    Re: Coping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/5) -- Sold, thanks guys. I ordered a Collins coping foot yesterday and a fe ...

    Re: Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (9/5/23) -- We make plank doors on a regular basis. Agree that if the 8’ tall door has ...

    Re: Lineal ft price
    A message posted at WOODWEB's Architectural Woodworking Forum (9/5/23) -- There is zero money in running sub-100' runs on a W&H unless you have r ...

    Carbide alternative
    A message posted at WOODWEB's Solid Wood Machining Forum (8/5) -- I currently use carbide inlay straight knives on my moulder for s4s in hard maple. ...

    Re: Panel glue up options
    A message posted at WOODWEB's Solid Wood Machining Forum (7/5) -- Are you mechanically inclined? If so, look at the auction market for a moulder. Sma ...

    Please Help Profimat 22N
    A message posted at WOODWEB's Architectural Woodworking Forum (7/5) -- I require manuals for a Profimat 22N moulder. Does anyone have a copy availabl ...

    Please Help Profimat 22N
    A message posted at WOODWEB's Solid Wood Machining Forum (7/5) -- I require manuals for a Profimat 22N moulder. Does anyone have a copy available? ...

    Re: Top and Bottom Planing several strips together
    A message posted at WOODWEB's Solid Wood Machining Forum (5/5) -- You would need segmented infeed rollers. I don't know if those exist for moulders. ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (5/5) -- We run a 5 head Weinig (wish it was 6) and we grind our knives on a Weinig pro ...

    Re: Miterfolding on CNC, getting proper cut depth
    A message posted at WOODWEB's CNC Forum (4/5) -- Matt, We have a moulder head like Alan showed, but we typically don't use it for mitre folding. When ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/5/22) -- Yes, cabinet door parts are a dream on the Quattromat or similar. The machine ha ...

    Re: Bridgewood Parts
    A message posted at WOODWEB's Solid Wood Machining Forum (3/5/22) -- I have the bridgewood moulder like the William and hussey but with 3 hp,drop par ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/5) -- Bob To act as a guide and shorten the distance of unsupported lumber between the en ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/22) -- Changed all the knives for genuine tersa knives on the jointer head. Remarkable ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/22) -- This may seem like an odd question, has the machine been placed on leveling pads ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/22) -- I'm going to keep working on it to get rid of the knife marks. Drives me nuts as ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/22) -- I am going to re-level it tomorrow and check all the bolts and pads. We have 1/2 ...

    Re: finger joint cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (12/4/22) -- Mark, Hate to hear that about Woodtech. They were my go to for feed roller ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (9/4) -- Well... I can honestly say it takes more than you wood think. We've been in the reclai ...

    Re: Questions about processing S4S
    A message posted at WOODWEB's Cabinetmaking Forum (8/4/23) -- Scott - Yes. Exactly. What I am trying to figure is which level of each I need. If annu ...

    What to automate next?
    A message posted at WOODWEB's Cabinetmaking Forum (6/4/22) -- At a bit of a crossroad as to what makes sense to automate next, and what would provide ...

    Re: 4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- where are you located? i'm getting ready to list a scmi sintex s4s machine. it does ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/3) -- I've never actually tried this but how about stacking 2 blades on a standard table ...

    Re: How often are you emptying your dust bin/bag?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/3/22) -- Dustin, Back in 2015 when it was installed, it cost $68K. I ha ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/3) -- Smithway XL Gang rips show up on the used market occasionally. It has a small footp ...

    Re: Access to Shop For Personal Projects Off-Hours
    A message posted at WOODWEB's Furniture Making Forum (6/3) -- Put your self in your boss's position. He likely has hundreds of thousands of dollars i ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/3/24) -- Just a PS to the above in case it's of interest - but as above anybody thinking ...

    Re: Moulding pricing
    A message posted at WOODWEB's Business and Management Forum (4/3) -- So I currently take finished size and add 35% for waste for most woods. Some kno ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/3/22) -- Sorry, should have been more specific. Cabinet doors. 20-25mm thick Just started ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/3/22) -- Doors? What kind of doors? -Cabinet doors -Passage doors ...

    Re: cnc videos
    A message posted at WOODWEB's CNC Forum (2/3/24) -- I have Benz moulder aggregate of similar design. It just has clearance for larger profiles. I've ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3/22) -- Waiting on new blades to arrive in before re-evaluating. Should be either today ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3/22) -- Dave I have never seen a chain drive, that could be the issue especially if you ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3/22) -- Good Morning Dave Curious to see if you solved your problem with the new knives? ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3/22) -- This is what I mean by chain drive ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/3) -- Just to clarify, I am not referencing the "infinite reverse shoe" if that ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/3) -- I have used several methods for holding work pieces. 1. Custom nylon pressure shoes ...

    Wood Moulding Matching Sample (Standard)
    A message posted at WOODWEB's Architectural Woodworking Forum (11/2) -- Good day folks! Looking for a better material to make our profile samples (St ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/2) -- Put a 4 wheel feeder on the saw, you should be able to fit 2 blades and a spacer. I ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/2) -- Beam saw. ...

    Questions about processing S4S
    A message posted at WOODWEB's Cabinetmaking Forum (8/2/23) -- As is the case with most things cabinetmaking, there are multiple ways to achieve the s ...

    Re: Top and Bottom Planing several strips together
    A message posted at WOODWEB's Solid Wood Machining Forum (5/2) -- I double face plane all the time on my moulder. I have spiral insert heads on 1st b ...

    Top and Bottom Planing several strips together
    A message posted at WOODWEB's Solid Wood Machining Forum (5/2) -- Hi All, Do you know any accurate way to top and bottom plane several lumber strips ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (5/2) -- JL, That adjustable fixture is ingenious. I had to study it for a while to cat ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (5/2) -- Dang, cats out of the bag. Works really well with the caveat being too tight a ...

    Re: Kentwood / Leadermac Moulders
    A message posted at WOODWEB's Solid Wood Machining Forum (5/2) -- We ran a 2002 Weinig Unimat 23E for about ten years, we bought it used. We had no p ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (4/2/26) -- Those kinds of ripples usually point more to setup or tooling rather than the ma ...

    Re: Domino df 700
    A message posted at WOODWEB's Architectural Woodworking Forum (4/2) -- I bought the big version also. Immediately made up some knives and run our own ...

    Re: moulder head balancing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/2/24) -- Any company that makes molding heads should be able to balance them. We use Grea ...

    Re: Cabinet door production time
    A message posted at WOODWEB's Architectural Woodworking Forum (2/2) -- It would be helpful to know what equipment you guys are running to get those t ...

    Weinig Moulder models
    A message posted at WOODWEB's Solid Wood Machining Forum (2/2) -- Can someone please explain the pecking order of Weinig Moulders. I am looking for a ...

    Weinig powermat 1200
    A message posted at WOODWEB's Solid Wood Machining Forum (1/2/25) -- We have a Weinig 1200 6 head moulder. Problem being that the #6 bottom isn’t str ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/2) -- A good low budget solution is a combination of a modified steel shoe and shop made ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/2) -- Shaner, There is a variety of ways to do what you are asking. Weinig make a two ste ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/2) -- Perfect. That really helps. I have tried a few ways on my own but never seem to wor ...

    Re: moulder hold down options
    A message posted at WOODWEB's Solid Wood Machining Forum (1/2) -- Shaner You might want to read this recent article we wrote on how to make a custom ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/1) -- Paul Any bed lube applied to the bed plates of the molder is designed to be milled ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/1) -- When we mill wood flooring, we always run it face up. When feeding the flooring in ...

    Re: Jointing on the Shaper
    A message posted at WOODWEB's Architectural Woodworking Forum (11/1) -- i do this all of the time with a spiral head in the shaper and an offset fenc ...

    Cyclone Exhaust Questions?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/1) -- We have a moulding shop, the usual: 6 head moulder, gang rip, 2 s ...

    Re: Molding knife compatibility
    A message posted at WOODWEB's Solid Wood Machining Forum (10/1) -- Chris On a Williams and Hussey or Shop Fox moulder the target dimension from the b ...

    small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/1) -- Gents, one of our projects involves us ripping 50-100pcs per day of some tricky 1/2 ...

    Re: Woven Wood Doors, A Drama In Five Parts
    A message posted at WOODWEB's Architectural Woodworking Forum (4/1) -- David Sochar: Perhaps I am misunderstanding this, but could you not have run l ...

    Re: Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- I have a important Oliver SLR that looks almost identical to the Cantek. 15 years o ...

    Re: Shop floor productivity issues
    A message posted at WOODWEB's Business and Management Forum (3/1) -- Our cabinet box assembly is mortise and tenon off the CNC, with full 3/4" b ...

    Wood Garage Door Lams or Outside Lining
    A message posted at WOODWEB's Architectural Woodworking Forum (3/1) -- I have a house trim job that I've been working on. And I've been asked to supp ...

    Re: What do you do with your bent lumber?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- I used to joint everything as well. Going to the moulder for S4S gives the parallel ...

    Re: Planner bed lube
    A message posted at WOODWEB's Solid Wood Machining Forum (10/30) -- Hi Gareth: I offer a number of different bed table lubricants and have many we ha ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/30) -- The picture shows that with more projection the hook angle is smaller. IIRC I drew ...

    Re: Weinig P22N Moulder Max Cutter Head Lengths
    A message posted at WOODWEB's Architectural Woodworking Forum (4/30) -- Call the tooling department at Weinig, they will be happy to help ...

    Re: Wadkin GD5 Moulder Operators Manual
    A message posted at WOODWEB's Solid Wood Machining Forum (8/29) -- http://www.rjmachinery.co.uk/manuals-files//wadkin/GD%20Premier%20Instruction%20Ma ...

    Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (5/29) -- My indeed roller axel bent,while in vise taking out axel from roller it dropped ou ...

    30 HP Cyclone Dust Collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/29) -- I am currently looking for a exterior dust collection unit that i ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/28/21) -- Thanks for everyone's responses, it helps. ...

    Re: S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/28) -- Grooved bed for short pieces is the way to go on a feed through. ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/27/21) -- Not every sale is a good sale. You can't be all things to all people. ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Pretty interesting spreadsheet. We have a similar one. Though not quite as fancy i ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I found this on Wood Web several years ago and have been using it ever since. You' ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- For some reason it didn't include the original Wood Web link in my last post. http ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26/24) -- Tech support rarely has good answers for obscure questions like these. The thin ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26/24) -- Why not ask Kentwood tech support? ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Planer, straight line rip saw, cut off saw,moulder and a mentor. Good luck, Bob ...

    Re: Rate your Nested Based CNC
    A message posted at WOODWEB's CNC Forum (7/26) -- Northwood 265 IH 2003 Two 5’ x 6’ Tables Full 5’ x 12’ coverage by all tools Travaini Oil Vane 40HP ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/26/25) -- Each brand is different but look at where the feed spindles mount, look for set ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/26/25) -- One other possibility to check. Make sure the drive wheel spindles are aligned ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/26/25) -- Thanks for the tips guys, much appreciated! Dustin, any tips for where this adj ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/26) -- For large quantities you need a Moulder machine, do all the faces in one pass, when yo ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/25/21) -- Similar to Thomas here but for us at least the hourly (or per foot calculated) ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25/25) -- I think your feed rollers are on correctly. I think the problem is the little t ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24/24) -- Only thing I can think about with this one is if you drop a part/bolt or someth ...

    Re: What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Send it to Ct saw and tool , Stratford ct ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23/23) -- Hi Cris, We have a 12" Ledermac. Depending on the tooling in the outside ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/23) -- Doing take-offs can be time consuming. But, if it is an estimate for a priva ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/23) -- OMG David! I have virtually never posted but was rolling in laughter at your ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/24) -- I can't answer your question as to why you need to shut off the dust collection ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/22) -- Dead on David! ...

    Re: (one man shop) Questions and Machinery Needed For a New Cabinet Shop
    A message posted at WOODWEB's Cabinetmaking Forum (6/22) -- I was thinking of starting a company to build airplanes, I decided against it as I have o ...

    Re: Leitz Riptec
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- If running thru a Moulder, consider climb milling on the side heads. A Heavy Shape ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/21) -- Caution - Cynicism Ahead: My area has always had the lumberyard do take-offs ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/21) -- Thank you David and Paul. I will definitely start contacting GCs in my area ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21) -- I've had a Weinig 5 head for quite a few years. Good machine, good support. I ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/25) -- I had this problem once, many years ago. As it turned out, I had the feed wheel ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- I don't know anything about your business or your market so I really cannot ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- Yes, you are trying to sell to the wrong crowd - the ones that don't buy. Bu ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- I agree with David. One comment I will add, for the straight knives, I bough ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20/21) -- Dustin, The amount of short runs has grown quite a bit in the last two years. I ...

    Re: What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (4/20) -- A six inch diameter, 12V9 shape Diamond wheel if its carbide teeth (90% of th ...

    Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/25) -- Hi all, Im working on setting up a new to me Weinig Profimat 23. The wood drift ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- Thanks David and Paul. Both of you point out some very good points. David, w ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- Larry, We have developed a molding calculator. It is an Excel spreed sheet. ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- A few things: Waste factors are are hard to guess at. For a job that require ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- It depends on the size of the job. Small runs, you have to charge a set-up. ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- Hi Paul, I really do appreciate your advice. Just to clarify, do you mean th ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- I meant you will receive 900BF. ...

    CNC Router Suggestions
    A message posted at WOODWEB's CNC Forum (6/19) -- I own a midsize furniture company and we are ready to purchase our first CNC machine. I have lots o ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18/21) -- Prices widely vary throughout the country, but Daves post is close to what is c ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18/21) -- Thanks for the reply Russ. This is the kind of info I am looking for, basically ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I agree with the dull knifes. This would include a knife that has been jointed too ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- Nope, 30-38ish FPM unless jointed. Your biggest enemy to tool life is heat, roc ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- Thanks for the info Troy. If you add a third knife to help with tear out on the ...

    Re: S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I've never seen or heard of a molder and cut off saw combination machine. That sou ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- In the 1980's a shop I ran charged an even $100, with a $50 an hour labor rate. ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- Thanks for the reply David, much appreciated. Anyone else have any input? ...

    Re: Need Help With Hold Down On Weinig Unimat Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/26) -- Without counters available use a piece of wood or something suitable at the des ...

    Any Moulder Runners?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Running a Kentwood M609X, and just had a spindle bearing go out on one of the ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I can't say why, if I could I probably would have found the problem much sooner, I ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Ok, I guess I'm going to answer my own question. After a day and a half of trying ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you explain why dull knives in one head produce this pattern? If sharpening or ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Glad you figured it out. That was going to be my suggestion as well. We recently h ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Thanks Russ, I was hoping you’d chime in. Unrelated to this topic, and likely d ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Profimat entry level Unimat medium production level Hydromat heavy production. ...

    Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- So I've been dealing with more homeowners lately and it's always super short runs. ...

    Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/22) -- When running a single knife finish machine is there ever any benefit to having ...

    Re: need of Arched Moulder service NYC
    A message posted at WOODWEB's Architectural Woodworking Forum (1/16) -- Hello Chris, We are in the hudson valley in Pawling NY give me a call 845-855 ...

    Re: Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- Thanks Russ. This is very helpful dave ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/15/22) -- Integral tenons with coped joints are arguably the gold standard but execu ...

    Re: Weinig P22N Moulder Max Cutter Head Lengths
    A message posted at WOODWEB's Architectural Woodworking Forum (4/15) -- It depends what kind of products you machine. If you make narrow strip floori ...

    Re: What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (4/15) -- Most grinding shops in the U.S. will have an NC controlled tool grinder to sh ...

    Re: What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (4/15) -- Thank you David. What kind of grinding wheel is used to grind the face, as sh ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/14) -- When I bought a 5 head Weinig for a shop I was running, I tracked nearly ever ...

    Re: outsource estimating
    A message posted at WOODWEB's Business and Management Forum (10/13) -- Trent, Let us imagine you find someone who does part time estimating. Let us a ...

    Planer rolls
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- Does anybody know who or where to send planer rolls to be redone as new. This is f ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/13) -- I'm with doug. Don't get hung up on the big W, there are other brands that ar ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- We rarely get a sliver kick back, but even with multiple rows of pawls, a few have ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I agree with the other guys. Sounds like you've got dull knives. They beat the woo ...

    handrail fittings WITHOUT CNC
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- I'm milling about 135ft of a custom (stair) handrail today & tomorrow, a ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/12) -- Yes i am having machine shop make me replacement part.I wish I could have found or ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- If you are making 2 per week, working 2 hours a day with the tools you have listed ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/12) -- yes weinig makes a good machine, but, wadkin, scmi,leadermac to name a few ar ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- I will bet lunch it is the right fence. Either the reference engraver fence or ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/11) -- Would be a very interesting thread to keep open to the knowledge base. To me ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- You will find some good discussion of glue failure in the archives and Knowledge B ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Thank you everone. Sounds like a good SLR saw will be the answer . I already was l ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- David is right. I would suspect knives first. Widebelt could be problematic depend ...

    Re: What is "normal" tooling style for Weinig molders
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Hi Scott, Congratulations on your purchase of your Weinig Moulder. Weinig can sup ...

    Re: Moulder investment
    A message posted at WOODWEB's Architectural Woodworking Forum (5/10) -- Things you will need , top of list Farmer to take all chips and shavings Fork ...

    Re: Setting up a solid door making factory
    A message posted at WOODWEB's Architectural Woodworking Forum (7/9) -- We've been making our own doors (in our smallish custom shop - 3 to 4 person, ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9/25) -- The casting upright part that holds the feed beam and mates with the back of the ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9/23) -- Hi Dave, I the classes I took like 20 years ago we got told not to use sealed Be ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/8) -- Jimb: The thing about smaller machinery is that very often, different brand names a ...

    Re: Shop Size
    A message posted at WOODWEB's CAD Forum (4/8) -- 5000' , 4x8 cnc router with offload full setups for stile/rail doors and mitered doors,slider saw, t ...

    Re: Moulder question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/7/23) -- My current molder doesn't have a reference engraver and I just ordered a new mol ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/5) -- No Good on the grizzly to short and axel is different thread? Anybody.? ...

    Re: Quicklock Terminus Style Moulder Head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/5) -- This head is designed to run with just the straight knives and not the other pocket ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5/26) -- Just spit balling but I did a Google search " parts for older Taiwanese mou ...

    Re: Weinig Moulder models
    A message posted at WOODWEB's Solid Wood Machining Forum (2/5) -- I have Russ thanks. ...

    Re: Pricing Jobs On A Moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (1/5) -- David is right about dealing with a lot of builders. We don't do take offs for ...

    Re: finger joint cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (12/4/22) -- Joe we use western roller for feeder/moulder wheels. They are very good. ...

    Hussey Knife Alignment
    A message posted at WOODWEB's Architectural Woodworking Forum (11/4) -- Does anyone else have trouble aligning Hussey Knives in their William's and H ...

    Re: William and Hussey Moulder Chicago
    A message posted at WOODWEB's Solid Wood Machining Forum (4/4) -- Based on what I saw on your web link of projects you should purchase one of your ow ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/4) -- We use a spreadsheet to do our first time quotes, and send the drawings as a separa ...

    Re: Second Moulder Choice
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- Russ, just what I've been thinking. After doing a little research and watching a fe ...

    Re: Second Moulder Choice
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- Vic My opinion would be keep the machine you have for S4S, overkill??? not really, ...

    Re: Weinig Moulder models
    A message posted at WOODWEB's Solid Wood Machining Forum (2/4) -- After look at it. For used machines Hydromat Is for high speed long runs Powermat c ...

    Re: Weinig P1000 12000 RPM Moulder
    A message posted at WOODWEB's WOODnetWORK Forum (2/4) -- HI. So we run a p1000 here. I can say 45 fpm is a little slow for 12000 rpm. If your grain i ...

    Re: William and Hussey Moulder Chicago
    A message posted at WOODWEB's Solid Wood Machining Forum (4/3) -- What are you trying to run? There is an Excellent mill work shop in Skokie that is ...

    Re: William and Hussey Moulder Chicago
    A message posted at WOODWEB's Solid Wood Machining Forum (4/3) -- borrow for two weeks? You can run a mile of trim in two weeks, that's no little job ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/3/26) -- Hi Barclay, Akhurst sells the Leadermac from Taiwan and they used to sell Cantek ...

    Aigner and SCMI
    A message posted at WOODWEB's Solid Wood Machining Forum (3/2) -- Hi Guys, I am hoping to upgrade my 90's SCM T130 spindle moulder/shaper with Ainger ...

    Re: Second Moulder Choice
    A message posted at WOODWEB's Solid Wood Machining Forum (2/2) -- A wise man once said to me you don’t make money doing setups. Would an HSK NC contr ...

    Re: volume gluing-up
    A message posted at WOODWEB's Solid Wood Machining Forum (11/1) -- Beyond vague. Be more specific. You talking ten panels a day, a hundred, a thousan ...

    Re: Kentwood / Leadermac Moulders
    A message posted at WOODWEB's Solid Wood Machining Forum (6/1) -- I run a Kentwood 612HD and we compared Kentwood to Leadermac. I agree more bang for ...

    Re: Any Moulder Runners?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/1) -- I've changed spindle bearings on my Weinig. They run a long time before any no ...

    Re: Super thin saw blades for Leadermac Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- Jeremy Super thin saws has great products that are easy to work with. A couple of t ...

    Re: Quicklock Terminus Style Moulder Head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/1) -- You should be fine, the knife pockets on the Terminus style heads are not very deep ...

      ---   Return to Top   ---     


    Job Opportunities and Services Exchange Results:

    Moulder technician, product flow, waste management, finishing technician Listing #482427 Listed on: 03/28 ...
    Moulder technician, product flow, waste management, finishing technician : WOODWEB's Job Opportunities Exchange

    Moulder technician, product flow, waste management, finishing technician Listing #482328 Listed on: 02/25 ...
    Moulder technician, product flow, waste management, finishing technician : WOODWEB's Job Opportunities Exchange

    Moulder supervisor/grinder/sorting Listing #482404 Listed on: 03/24 ...
    Moulder supervisor/grinder/sorting : WOODWEB's Job Opportunities Exchange

    Moulder Operator/ Knife Grinderman Listing #482338 Listed on: 03/02 ...
    Moulder Operator/ Knife Grinderman : WOODWEB's Job Opportunities Exchange

      ---   Return to Top   ---     


    Machinery Exchange Results:

    Wadkin (5) head 5"x9" moulder Listing #555392 Listed on: 03/29 ...
    Wadkin (5) head 5"x9" moulder : WOODWEB's Machinery Exchange

    Wood moulder push feed Listing #555292 Listed on: 03/18 ...
    Wood moulder push feed : WOODWEB's Machinery Exchange

    Weinig Model Unimat 23E Six Head Moulder Listing #555347 Listed on: 03/23 ...
    Weinig Model Unimat 23E Six Head Moulder : WOODWEB's Machinery Exchange

    Weinig Model Unimat 23E Six Head Moulder Listing #555003 Listed on: 02/23 ...
    Weinig Model Unimat 23E Six Head Moulder : WOODWEB's Machinery Exchange

    SCMI Sintex Moulder Listing #555326 Listed on: 03/22 ...
    SCMI Sintex Moulder : WOODWEB's Machinery Exchange

    Weinig Profimat 23-E 5 head moulder 5"x9" capacity Listing #555639 Listed on: 04/17 ...
    Weinig Profimat 23-E 5 head moulder 5"x9" capacity : WOODWEB's Machinery Exchange

    Weinig Profimat 22N Moulder Listing #555219 Listed on: 03/12 ...
    Weinig Profimat 22N Moulder : WOODWEB's Machinery Exchange

    Paulson 6NB Moulder Listing #555613 Listed on: 04/15 ...
    Paulson 6NB Moulder : WOODWEB's Machinery Exchange

    Paulson 6NB Moulder Listing #554902 Listed on: 02/14 ...
    Paulson 6NB Moulder : WOODWEB's Machinery Exchange

    Friulmac Model Dualfeed Double-End Trim and Moulder Feeder Listing #555349 Listed on: 03/23 ...
    Friulmac Model Dualfeed Double-End Trim and Moulder Feeder : WOODWEB's Machinery Exchange

    Friulmac Model Dualfeed Double-End Trim and Moulder Feeder Listing #555006 Listed on: 02/23 ...
    Friulmac Model Dualfeed Double-End Trim and Moulder Feeder : WOODWEB's Machinery Exchange

    Williams & Hussey # 206 Moulder 2hp 115/230V Listing #555206 Listed on: 03/11 ...
    Williams & Hussey # 206 Moulder 2hp 115/230V : WOODWEB's Machinery Exchange

    Weinig Profimat 23 Moulder Listing #555040 Listed on: 02/26 ...
    Weinig Profimat 23 Moulder : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #555275 Listed on: 03/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #555274 Listed on: 03/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #555273 Listed on: 03/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #555272 Listed on: 03/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #555271 Listed on: 03/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Williams & Hussey 206 Canted Moulder Planer Listing #554955 Listed on: 02/17 ...
    Williams & Hussey 206 Canted Moulder Planer : WOODWEB's Machinery Exchange

    Weinig Powermat 1000 Moulder Listing #555210 Listed on: 03/11 ...
    Weinig Powermat 1000 Moulder : WOODWEB's Machinery Exchange

    Weinig Unimat 1000 Listing #555037 Listed on: 02/25 ...
    Weinig Unimat 1000 : WOODWEB's Machinery Exchange

    Weinig 17N eight head feed through molder Listing #555163 Listed on: 03/09 ...
    Weinig 17N eight head feed through molder : WOODWEB's Machinery Exchange

    Weinig 17N eight head feed through molder Listing #555513 Listed on: 04/06 ...
    Weinig 17N eight head feed through molder : WOODWEB's Machinery Exchange

    Automated double mitre production line with feeder/unloader Listing #555442 Listed on: 03/31 ...
    Automated double mitre production line with feeder/unloader : WOODWEB's Machinery Exchange

    Rangate Spring Sale | Rangate Lift Cart 300 (Free Freight) Listing #555439 Listed on: 03/31 ...
    Rangate Spring Sale | Rangate Lift Cart 300 (Free Freight) : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Virutex veneer cutter Listing #555441 Listed on: 03/31 ...
    Virutex veneer cutter : WOODWEB's Machinery Exchange

    Powermatic Shaper 2700 5-3 (2025) - California Listing #555440 Listed on: 03/31 ...
    Powermatic Shaper 2700 5-3 (2025) - California : WOODWEB's Machinery Exchange

    Weinig 934 Grinder Listing #555438 Listed on: 03/31 ...
    Weinig 934 Grinder : WOODWEB's Machinery Exchange

    Northtech Model iDovetail30 CNC Dovetailer Listing #555413 Listed on: 03/30 ...
    Northtech Model iDovetail30 CNC Dovetailer : WOODWEB's Machinery Exchange

    Northtech Model NT-iGlue450 Automatic Dovetail Gluer Listing #555414 Listed on: 03/30 ...
    Northtech Model NT-iGlue450 Automatic Dovetail Gluer : WOODWEB's Machinery Exchange

    2020 OMAL HBD 1300 OF Horizontal Bore & Dowel Insertion Machine – 460 V 3-Phase – Excellent Conditio Listing #555409 Listed on: 03/30 ...
    2020 OMAL HBD 1300 OF Horizontal Bore & Dowel Insertion Machine – 460 V 3-Phase – Excellent Conditio : WOODWEB's Machinery Exchange

    SCM SI 400 Nova Listing #555411 Listed on: 03/30 ...
    SCM SI 400 Nova : WOODWEB's Machinery Exchange

    150 HP Mitsubishi un-used FR-A840-03250-E1-U6 Variable speed frequency drive inverter, 7 available, Listing #555432 Listed on: 03/30 ...
    150 HP Mitsubishi un-used FR-A840-03250-E1-U6 Variable speed frequency drive inverter, 7 available, : WOODWEB's Machinery Exchange

    300hp Mitsubishi FR-A840-04810-E1-US, Inverter Variable speed frequency drive inverters, drives, Listing #555433 Listed on: 03/30 ...
    300hp Mitsubishi FR-A840-04810-E1-US, Inverter Variable speed frequency drive inverters, drives, : WOODWEB's Machinery Exchange

    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw Listing #555416 Listed on: 03/30 ...
    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw : WOODWEB's Machinery Exchange

    2022 Homag Sawtech B-200 Panel Saw Listing #555435 Listed on: 03/30 ...
    2022 Homag Sawtech B-200 Panel Saw : WOODWEB's Machinery Exchange

    484RF10 baghouse dust collection systems, already dismantled Listing #555429 Listed on: 03/30 ...
    484RF10 baghouse dust collection systems, already dismantled : WOODWEB's Machinery Exchange

    C.R. ONSRUD 900 VS Inverted Router Listing #555410 Listed on: 03/30 ...
    C.R. ONSRUD 900 VS Inverted Router : WOODWEB's Machinery Exchange

    Homag Model KAL210 Ambition 2262 Edgebander Listing #555424 Listed on: 03/30 ...
    Homag Model KAL210 Ambition 2262 Edgebander : WOODWEB's Machinery Exchange

    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars Listing #555426 Listed on: 03/30 ...
    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars : WOODWEB's Machinery Exchange

    Northtech Model NT-625MS Sliding Table Shaper Listing #555415 Listed on: 03/30 ...
    Northtech Model NT-625MS Sliding Table Shaper : WOODWEB's Machinery Exchange

    Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller Listing #555430 Listed on: 03/30 ...
    Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller : WOODWEB's Machinery Exchange

    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity Listing #555425 Listed on: 03/30 ...
    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity : WOODWEB's Machinery Exchange

    Alfamacchine Model TA-350 Double Miter Saw Listing #555423 Listed on: 03/30 ...
    Alfamacchine Model TA-350 Double Miter Saw : WOODWEB's Machinery Exchange

    Montgomery Blo-Hog, top drop feed wood grinder, bottom discharge Listing #555431 Listed on: 03/30 ...
    Montgomery Blo-Hog, top drop feed wood grinder, bottom discharge : WOODWEB's Machinery Exchange

    AES Model S-2500-2 Dust Collector Listing #555417 Listed on: 03/30 ...
    AES Model S-2500-2 Dust Collector : WOODWEB's Machinery Exchange

    Ruvo Model 2200A Semi-Automatic Stair Router Listing #555420 Listed on: 03/30 ...
    Ruvo Model 2200A Semi-Automatic Stair Router : WOODWEB's Machinery Exchange

    2021 Felder FD 21 Boring Machine – Excellent Condition Listing #555408 Listed on: 03/30 ...
    2021 Felder FD 21 Boring Machine – Excellent Condition : WOODWEB's Machinery Exchange

    AES Model ST-10000 Dust Collector Listing #555419 Listed on: 03/30 ...
    AES Model ST-10000 Dust Collector : WOODWEB's Machinery Exchange

    AES Model S-6500 Dust Collector Listing #555418 Listed on: 03/30 ...
    AES Model S-6500 Dust Collector : WOODWEB's Machinery Exchange

    Unknown Pinch Roll Listing #555422 Listed on: 03/30 ...
    Unknown Pinch Roll : WOODWEB's Machinery Exchange

    Cantek JDT65 Dovetail Machine, New-Used Listing #555436 Listed on: 03/30 ...
    Cantek JDT65 Dovetail Machine, New-Used : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Biesse Rover 24 FT Router Listing #555434 Listed on: 03/30 ...
    Biesse Rover 24 FT Router : WOODWEB's Machinery Exchange

    Wisconsin Automated Machine,C-450 single end tenoner Listing #555428 Listed on: 03/30 ...
    Wisconsin Automated Machine,C-450 single end tenoner : WOODWEB's Machinery Exchange

    Black Brothers Spare Rolls for Model 775 68" Glue Spreader Listing #555421 Listed on: 03/30 ...
    Black Brothers Spare Rolls for Model 775 68" Glue Spreader : WOODWEB's Machinery Exchange

    24" Master sander Listing #555427 Listed on: 03/30 ...
    24" Master sander : WOODWEB's Machinery Exchange

    Pillar Machine H49 Horizontal Bore & Dowel Insertion Machine (Rebuilt in 2019 ) Listing #555397 Listed on: 03/29 ...
    Pillar Machine H49 Horizontal Bore & Dowel Insertion Machine (Rebuilt in 2019 ) : WOODWEB's Machinery Exchange

    2021 Go Fast Twin 2NXL Double Head Pallet Notcher Listing #555401 Listed on: 03/29 ...
    2021 Go Fast Twin 2NXL Double Head Pallet Notcher : WOODWEB's Machinery Exchange

    Italpresse XL8 Hot Press (1400 X 4200 mm Capacity) Listing #555403 Listed on: 03/29 ...
    Italpresse XL8 Hot Press (1400 X 4200 mm Capacity) : WOODWEB's Machinery Exchange

    SCM minimax me 20 Edgebander (1-Phase) IN STOCK Listing #555398 Listed on: 03/29 ...
    SCM minimax me 20 Edgebander (1-Phase) IN STOCK : WOODWEB's Machinery Exchange

    2016 Castaly 24″ CS-24L Pneumatic Upcut Saw Listing #555406 Listed on: 03/29 ...
    2016 Castaly 24″ CS-24L Pneumatic Upcut Saw : WOODWEB's Machinery Exchange

    Doucet “SDM-M-1-30-72” Mitered Door Clamp Listing #555400 Listed on: 03/29 ...
    Doucet “SDM-M-1-30-72” Mitered Door Clamp : WOODWEB's Machinery Exchange

    2017 Knight Global 4,000 LB 118″ X 75″ Lift Table Listing #555394 Listed on: 03/29 ...
    2017 Knight Global 4,000 LB 118″ X 75″ Lift Table : WOODWEB's Machinery Exchange

    C.R. ONSRUD 36210 Inverted Pin Router W/Vacuum Pump Listing #555395 Listed on: 03/29 ...
    C.R. ONSRUD 36210 Inverted Pin Router W/Vacuum Pump : WOODWEB's Machinery Exchange

    Black Bros Top & Bottom 60″ Panel Cleaner Listing #555396 Listed on: 03/29 ...
    Black Bros Top & Bottom 60″ Panel Cleaner : WOODWEB's Machinery Exchange

    Ligmatech MPH 450/25/09 Case Clamp – Euro Style Listing #555405 Listed on: 03/29 ...
    Ligmatech MPH 450/25/09 Case Clamp – Euro Style : WOODWEB's Machinery Exchange

    Unique 290 Cabinet Door & Frame Clamping Table (2) Listing #555404 Listed on: 03/29 ...
    Unique 290 Cabinet Door & Frame Clamping Table (2) : WOODWEB's Machinery Exchange

    Schubert 72″ Veneer Guillotine Listing #555399 Listed on: 03/29 ...
    Schubert 72″ Veneer Guillotine : WOODWEB's Machinery Exchange

    Northfield No. 4 – 16″ Table Saw Listing #555407 Listed on: 03/29 ...
    Northfield No. 4 – 16″ Table Saw : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Diehl Wide Arm straight line rip saw Listing #555389 Listed on: 03/29 ...
    Diehl Wide Arm straight line rip saw : WOODWEB's Machinery Exchange

    Smithway XL -gang rip saw - model No- 104 Listing #555393 Listed on: 03/29 ...
    Smithway XL -gang rip saw - model No- 104 : WOODWEB's Machinery Exchange

    Centauro copy lathe Listing #555390 Listed on: 03/29 ...
    Centauro copy lathe : WOODWEB's Machinery Exchange

    Hofer (German engineering) industrial stroke sander Listing #555391 Listed on: 03/29 ...
    Hofer (German engineering) industrial stroke sander : WOODWEB's Machinery Exchange

    Beaded frame frame hauncher Listing #555387 Listed on: 03/29 ...
    Beaded frame frame hauncher : WOODWEB's Machinery Exchange

    Brandt KDN 520 Listing #555385 Listed on: 03/28 ...
    Brandt KDN 520 : WOODWEB's Machinery Exchange

    JLT Panel Flattener Listing #555381 Listed on: 03/27 ...
    JLT Panel Flattener : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Brandt KDN 520 Listing #555378 Listed on: 03/27 ...
    Brandt KDN 520 : WOODWEB's Machinery Exchange

    Busellato jet 130 for sale or for parts Listing #555377 Listed on: 03/27 ...
    Busellato jet 130 for sale or for parts : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    SCM SI300 5.5 ft Sliding Table Saw Listing #555092 Listed on: 03/02 ...
    SCM SI300 5.5 ft Sliding Table Saw : WOODWEB's Machinery Exchange

    Weima WLB wood shredder Listing #555382 Listed on: 03/27 ...
    Weima WLB wood shredder : WOODWEB's Machinery Exchange

    Casadei (SCM) AXO 300 Panel Saw Listing #555380 Listed on: 03/27 ...
    Casadei (SCM) AXO 300 Panel Saw : WOODWEB's Machinery Exchange

    Weeke Venture 1 Cnc Machining Center Listing #555048 Listed on: 02/27 ...
    Weeke Venture 1 Cnc Machining Center : WOODWEB's Machinery Exchange

    Omal HBD 1300 OF Bore/Glue/Dowel Machine Listing #555047 Listed on: 02/27 ...
    Omal HBD 1300 OF Bore/Glue/Dowel Machine : WOODWEB's Machinery Exchange

    Dmc US 1350 Orbital Sander Listing #555049 Listed on: 02/27 ...
    Dmc US 1350 Orbital Sander : WOODWEB's Machinery Exchange

    Scmi E-S 630 CLASS K Singe Surface Planer Listing #555050 Listed on: 02/27 ...
    Scmi E-S 630 CLASS K Singe Surface Planer : WOODWEB's Machinery Exchange

    FLASH SALE | Rangate GLUING Nozzles | Buy 6 Get 11% Off (Mix & Match) Listing #555046 Listed on: 02/27 ...
    FLASH SALE | Rangate GLUING Nozzles | Buy 6 Get 11% Off (Mix & Match) : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Whitney 30" Planer Listing #555375 Listed on: 03/26 ...
    Whitney 30" Planer : WOODWEB's Machinery Exchange

    SCM500SP/CRNTURO Listing #555374 Listed on: 03/26 ...
    SCM500SP/CRNTURO : WOODWEB's Machinery Exchange

    Repair service Listing #555376 Listed on: 03/26 ...
    Repair service : WOODWEB's Machinery Exchange

    Dodds SE1 Dovetailer Listing #555039 Listed on: 02/26 ...
    Dodds SE1 Dovetailer : WOODWEB's Machinery Exchange

    Republic HRC1452 Vacuum Pump Listing #555042 Listed on: 02/26 ...
    Republic HRC1452 Vacuum Pump : WOODWEB's Machinery Exchange

    Mikron ROS 200 rosette machine Listing #554899 Listed on: 02/12 ...
    Mikron ROS 200 rosette machine : WOODWEB's Machinery Exchange

    Coe 233 Rotary Veneer Lathe Listing #555041 Listed on: 02/26 ...
    Coe 233 Rotary Veneer Lathe : WOODWEB's Machinery Exchange

    Doucet X 60 & MP 32 Finger Jointing System Listing #555372 Listed on: 03/25 ...
    Doucet X 60 & MP 32 Finger Jointing System : WOODWEB's Machinery Exchange

    Sorbini SMARTCOATER MF Roll Coater Listing #555371 Listed on: 03/25 ...
    Sorbini SMARTCOATER MF Roll Coater : WOODWEB's Machinery Exchange

    Biesse LATO 28 Edgebander Listing #555368 Listed on: 03/25 ...
    Biesse LATO 28 Edgebander : WOODWEB's Machinery Exchange

    Homag Edgebander with Thomas Return Conveyor Listing #555365 Listed on: 03/25 ...
    Homag Edgebander with Thomas Return Conveyor : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    2021 Salvador Push 250 Accurate Chop Saw Listing #555366 Listed on: 03/25 ...
    2021 Salvador Push 250 Accurate Chop Saw : WOODWEB's Machinery Exchange

    Homag SAWTEQ B-200 Rear Load Panel Saw Year 2021 Listing #555369 Listed on: 03/25 ...
    Homag SAWTEQ B-200 Rear Load Panel Saw Year 2021 : WOODWEB's Machinery Exchange

    Homag CNC with Pushoff and Outfeed Conveyor Listing #555367 Listed on: 03/25 ...
    Homag CNC with Pushoff and Outfeed Conveyor : WOODWEB's Machinery Exchange

    New small indoor Briquetter Listing #555370 Listed on: 03/25 ...
    New small indoor Briquetter : WOODWEB's Machinery Exchange

    Biesse Selco Sektor 470 Panel Saw Listing #555364 Listed on: 03/25 ...
    Biesse Selco Sektor 470 Panel Saw : WOODWEB's Machinery Exchange

    Diehl Wide Arm straight line rip saw Listing #555024 Listed on: 02/24 ...
    Diehl Wide Arm straight line rip saw : WOODWEB's Machinery Exchange

    Omga T421 Programable Cut-off saw Listing #555031 Listed on: 02/25 ...
    Omga T421 Programable Cut-off saw : WOODWEB's Machinery Exchange

    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT Listing #555033 Listed on: 02/25 ...
    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT : WOODWEB's Machinery Exchange

    Brand New SNX/Marbel Laminate Slitter. Mfg in USA Listing #555034 Listed on: 02/25 ...
    Brand New SNX/Marbel Laminate Slitter. Mfg in USA : WOODWEB's Machinery Exchange

    Quickwood Lineal Profile Sander Listing #555035 Listed on: 02/25 ...
    Quickwood Lineal Profile Sander : WOODWEB's Machinery Exchange

    SCM T 124 lathe with duplicator Listing #555038 Listed on: 02/25 ...
    SCM T 124 lathe with duplicator : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT Listing #555361 Listed on: 03/24 ...
    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT : WOODWEB's Machinery Exchange

    Brand New SNX/Marbel Laminate Slitter. Mfg in USA Listing #555360 Listed on: 03/24 ...
    Brand New SNX/Marbel Laminate Slitter. Mfg in USA : WOODWEB's Machinery Exchange

    HOLZ-HER ARCUS 1334 Edgebander (2011) - Diamond Tooling - Low Hours Listing #555030 Listed on: 02/24 ...
    HOLZ-HER ARCUS 1334 Edgebander (2011) - Diamond Tooling - Low Hours : WOODWEB's Machinery Exchange

    Mereen Johnson 312-DC-OPH1 Dip Chain Gang Rip Saw Listing #555027 Listed on: 02/24 ...
    Mereen Johnson 312-DC-OPH1 Dip Chain Gang Rip Saw : WOODWEB's Machinery Exchange

    Scm Minimax Formula S1 Sliding Table Saw Listing #555029 Listed on: 02/24 ...
    Scm Minimax Formula S1 Sliding Table Saw : WOODWEB's Machinery Exchange

    Mereen Johnson 424 DC Gang Rip Saw Listing #555023 Listed on: 02/24 ...
    Mereen Johnson 424 DC Gang Rip Saw : WOODWEB's Machinery Exchange

    Northtech Chisel Mortiser Listing #555025 Listed on: 02/24 ...
    Northtech Chisel Mortiser : WOODWEB's Machinery Exchange

    Lodifast 96" Rotary Press Listing #555022 Listed on: 02/24 ...
    Lodifast 96" Rotary Press : WOODWEB's Machinery Exchange

    Murphy Rodgers 100 HP dust collector Listing #555020 Listed on: 02/24 ...
    Murphy Rodgers 100 HP dust collector : WOODWEB's Machinery Exchange

    Deihl SL 52 Straight Line Rip Listing #555021 Listed on: 02/24 ...
    Deihl SL 52 Straight Line Rip : WOODWEB's Machinery Exchange

    Deihl MR 90 Gang Rip Saw Listing #555028 Listed on: 02/24 ...
    Deihl MR 90 Gang Rip Saw : WOODWEB's Machinery Exchange

    2024 QuickWood CB1000 “The Beast” Oscillating Brush Sander Listing #555331 Listed on: 03/22 ...
    2024 QuickWood CB1000 “The Beast” Oscillating Brush Sander : WOODWEB's Machinery Exchange

    Northtech Model NT-400EL Double Surface Planer Listing #555338 Listed on: 03/23 ...
    Northtech Model NT-400EL Double Surface Planer : WOODWEB's Machinery Exchange

    Butfering Model SWT 335 RRL Three Head 53" Wide Belt Sander Listing #555350 Listed on: 03/23 ...
    Butfering Model SWT 335 RRL Three Head 53" Wide Belt Sander : WOODWEB's Machinery Exchange

    Dantherm Model NFK-2000 4+1 20,000 CFM Dust Collection System Listing #555340 Listed on: 03/23 ...
    Dantherm Model NFK-2000 4+1 20,000 CFM Dust Collection System : WOODWEB's Machinery Exchange

    Modesta MFU5000 15 HP 5,000 CFM Interior Dust Collector Listing #555339 Listed on: 03/23 ...
    Modesta MFU5000 15 HP 5,000 CFM Interior Dust Collector : WOODWEB's Machinery Exchange

    Weeke BHP 200-CNC Machine Center with NESTING Table Listing #555351 Listed on: 03/23 ...
    Weeke BHP 200-CNC Machine Center with NESTING Table : WOODWEB's Machinery Exchange

    Weinig Model Rondamat 960 Profile Grinder Listing #555343 Listed on: 03/23 ...
    Weinig Model Rondamat 960 Profile Grinder : WOODWEB's Machinery Exchange

    Vecoplan 2016 Model VAZ 1300 M Vertical Wood Grinder Listing #555341 Listed on: 03/23 ...
    Vecoplan 2016 Model VAZ 1300 M Vertical Wood Grinder : WOODWEB's Machinery Exchange

    Hoffmann Model PU2-TL Dovetail Router Listing #555342 Listed on: 03/23 ...
    Hoffmann Model PU2-TL Dovetail Router : WOODWEB's Machinery Exchange

    Vitap Model T21 Horizontal/Vertical 32mm Boring Machine Listing #555346 Listed on: 03/23 ...
    Vitap Model T21 Horizontal/Vertical 32mm Boring Machine : WOODWEB's Machinery Exchange

    Griggio Model PSA 630 Single-Sided Planer Listing #555348 Listed on: 03/23 ...
    Griggio Model PSA 630 Single-Sided Planer : WOODWEB's Machinery Exchange

    Tannewitz Advantage Series 36" Vertical Bandsaw Listing #555345 Listed on: 03/23 ...
    Tannewitz Advantage Series 36" Vertical Bandsaw : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Northfield Model 12-PM 12" Jointer Listing #555344 Listed on: 03/23 ...
    Northfield Model 12-PM 12" Jointer : WOODWEB's Machinery Exchange

    Paul C14 Scan II w/ Paul Wood Scanning System Listing #555004 Listed on: 02/23 ...
    Paul C14 Scan II w/ Paul Wood Scanning System : WOODWEB's Machinery Exchange

    Northtech Model NT-400EL Double Surface Planer Listing #554996 Listed on: 02/23 ...
    Northtech Model NT-400EL Double Surface Planer : WOODWEB's Machinery Exchange

    Butfering Model SWT 335 RRL Three Head 53" Wide Belt Sander Listing #555007 Listed on: 02/23 ...
    Butfering Model SWT 335 RRL Three Head 53" Wide Belt Sander : WOODWEB's Machinery Exchange

    Kentwood R340SM3 Moving Blade Gang Rip Saw w/ Advantage Rip I Infeed Listing #555008 Listed on: 02/23 ...
    Kentwood R340SM3 Moving Blade Gang Rip Saw w/ Advantage Rip I Infeed : WOODWEB's Machinery Exchange

    Weinig Model ProfiJoint Finger Jointer Listing #555001 Listed on: 02/23 ...
    Weinig Model ProfiJoint Finger Jointer : WOODWEB's Machinery Exchange

    Modesta MFU5000 15 HP 5,000 CFM Interior Dust Collector Listing #554997 Listed on: 02/23 ...
    Modesta MFU5000 15 HP 5,000 CFM Interior Dust Collector : WOODWEB's Machinery Exchange

    Komo VR 508 Cnc Router Listing #555016 Listed on: 02/23 ...
    Komo VR 508 Cnc Router : WOODWEB's Machinery Exchange

    Weeke BHP 200-CNC Machine Center with NESTING Table Listing #555009 Listed on: 02/23 ...
    Weeke BHP 200-CNC Machine Center with NESTING Table : WOODWEB's Machinery Exchange

    3.5Ft Heavy Duty Belted 14"x42" Conveyor, 3/4HP, 115V, 1PH, For/Rev, Adjustable legs Listing #555017 Listed on: 02/23 ...
    3.5Ft Heavy Duty Belted 14"x42" Conveyor, 3/4HP, 115V, 1PH, For/Rev, Adjustable legs : WOODWEB's Machinery Exchange

    Vitap Model T21 Horizontal/Vertical 32mm Boring Machine Listing #555002 Listed on: 02/23 ...
    Vitap Model T21 Horizontal/Vertical 32mm Boring Machine : WOODWEB's Machinery Exchange

    Griggio Model PSA 630 Single-Sided Planer Listing #555005 Listed on: 02/23 ...
    Griggio Model PSA 630 Single-Sided Planer : WOODWEB's Machinery Exchange

    Homag Edgebander with Thomas Return Conveyor Listing #555012 Listed on: 02/23 ...
    Homag Edgebander with Thomas Return Conveyor : WOODWEB's Machinery Exchange

    Mellott Model 140 Scrap Shear Listing #554999 Listed on: 02/23 ...
    Mellott Model 140 Scrap Shear : WOODWEB's Machinery Exchange

    Tannewitz Advantage Series 36" Vertical Bandsaw Listing #555000 Listed on: 02/23 ...
    Tannewitz Advantage Series 36" Vertical Bandsaw : WOODWEB's Machinery Exchange

    Pistorius SC 20P Cut-off Saw Listing #555015 Listed on: 02/23 ...
    Pistorius SC 20P Cut-off Saw : WOODWEB's Machinery Exchange

    Northfield Model 12-PM 12" Jointer Listing #554998 Listed on: 02/23 ...
    Northfield Model 12-PM 12" Jointer : WOODWEB's Machinery Exchange

    Unique 4512 Shape & Sand Machine Listing #555014 Listed on: 02/23 ...
    Unique 4512 Shape & Sand Machine : WOODWEB's Machinery Exchange

    Oliver 299D Listing #555013 Listed on: 02/23 ...
    Oliver 299D : WOODWEB's Machinery Exchange

    SAC Prima K 970 Listing #555019 Listed on: 02/23 ...
    SAC Prima K 970 : WOODWEB's Machinery Exchange

    Solid Surface oven_Schultz SSO12 Listing #555018 Listed on: 02/23 ...
    Solid Surface oven_Schultz SSO12 : WOODWEB's Machinery Exchange

    New small indoor Briquetter Listing #555011 Listed on: 02/23 ...
    New small indoor Briquetter : WOODWEB's Machinery Exchange

    DEMO SCM minimax me 20 Edgebander (1-Phase) Listing #555329 Listed on: 03/22 ...
    DEMO SCM minimax me 20 Edgebander (1-Phase) : WOODWEB's Machinery Exchange

    Uhling HP3000 Case Clamp W/Over Head Clamp Listing #555324 Listed on: 03/22 ...
    Uhling HP3000 Case Clamp W/Over Head Clamp : WOODWEB's Machinery Exchange

    RoboPac Compacta 6 Semi-Automatic Stretch Wrapper Listing #555327 Listed on: 03/22 ...
    RoboPac Compacta 6 Semi-Automatic Stretch Wrapper : WOODWEB's Machinery Exchange

    Northern Blower 5010 Class 2 Size 3000 – 30 HP Blower Listing #555328 Listed on: 03/22 ...
    Northern Blower 5010 Class 2 Size 3000 – 30 HP Blower : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    15 hp Cyclone Listing #555319 Listed on: 03/22 ...
    15 hp Cyclone : WOODWEB's Machinery Exchange

    Used Ritter 4 spindle horizontal borer Listing #555335 Listed on: 03/22 ...
    Used Ritter 4 spindle horizontal borer : WOODWEB's Machinery Exchange

    Two Aigner push sticks Listing #555336 Listed on: 03/22 ...
    Two Aigner push sticks : WOODWEB's Machinery Exchange

    Used Cantek HR400PB Horizontal Band Resaw Listing #555312 Listed on: 03/21 ...
    Used Cantek HR400PB Horizontal Band Resaw : WOODWEB's Machinery Exchange

    Used Castle TSM-35 Pocket Hole Machine Listing #555313 Listed on: 03/21 ...
    Used Castle TSM-35 Pocket Hole Machine : WOODWEB's Machinery Exchange

    Used Fletcher EZ Door Machine Listing #555311 Listed on: 03/21 ...
    Used Fletcher EZ Door Machine : WOODWEB's Machinery Exchange

    Used Taylor 6 Section Clamp Carrier Listing #555314 Listed on: 03/21 ...
    Used Taylor 6 Section Clamp Carrier : WOODWEB's Machinery Exchange

    Used Dodds Model C-48M Drawer Clamp Listing #555315 Listed on: 03/21 ...
    Used Dodds Model C-48M Drawer Clamp : WOODWEB's Machinery Exchange

    Used Omec SCM-1200 Drawer Clamp Listing #555316 Listed on: 03/21 ...
    Used Omec SCM-1200 Drawer Clamp : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Linear sliding table pneumatic coping sled Listing #554866 Listed on: 02/09 ...
    Linear sliding table pneumatic coping sled : WOODWEB's Machinery Exchange

    Sliding table shaper tenoning coping table Listing #554976 Listed on: 02/20 ...
    Sliding table shaper tenoning coping table : WOODWEB's Machinery Exchange

    Univeral Sliding table shaper - tenoner attachement Listing #554975 Listed on: 02/20 ...
    Univeral Sliding table shaper - tenoner attachement : WOODWEB's Machinery Exchange

    Tilt and Turn window tooling Listing #555308 Listed on: 03/20 ...
    Tilt and Turn window tooling : WOODWEB's Machinery Exchange

    SAC P 3 Profiler Listing #555305 Listed on: 03/20 ...
    SAC P 3 Profiler : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Ayen OSB23 Line Boring Listing #555306 Listed on: 03/20 ...
    Ayen OSB23 Line Boring : WOODWEB's Machinery Exchange

    CNC Aggregate Listing #555307 Listed on: 03/20 ...
    CNC Aggregate : WOODWEB's Machinery Exchange

    Murphy Rodgers MRM-12 Dust collector Listing #555309 Listed on: 03/20 ...
    Murphy Rodgers MRM-12 Dust collector : WOODWEB's Machinery Exchange

    Doing tenon / mortise work on a shaper? Try adjustable groovers! Listing #554978 Listed on: 02/20 ...
    Doing tenon / mortise work on a shaper? Try adjustable groovers! : WOODWEB's Machinery Exchange

    Murphy Rodgers MRT-10A, 7.5HP Dust Collector, Plenum, Bags, 3PH, Cleaned, Checked Listing #554981 Listed on: 02/20 ...
    Murphy Rodgers MRT-10A, 7.5HP Dust Collector, Plenum, Bags, 3PH, Cleaned, Checked : WOODWEB's Machinery Exchange

    JLT 79K-7 Door & Panel Clamp - Low use Listing #554977 Listed on: 02/20 ...
    JLT 79K-7 Door & Panel Clamp - Low use : WOODWEB's Machinery Exchange

    1985 Martin T71 sliding panel saw Listing #554979 Listed on: 02/20 ...
    1985 Martin T71 sliding panel saw : WOODWEB's Machinery Exchange

    Dust collector and ductwork Listing #554980 Listed on: 02/20 ...
    Dust collector and ductwork : WOODWEB's Machinery Exchange

    Line boring Machine Listing #555302 Listed on: 03/19 ...
    Line boring Machine : WOODWEB's Machinery Exchange

    SCM DMC SD60 53" Dual head sander Listing #555295 Listed on: 03/19 ...
    SCM DMC SD60 53" Dual head sander : WOODWEB's Machinery Exchange

    Maggi Boring System 35 Listing #555294 Listed on: 03/19 ...
    Maggi Boring System 35 : WOODWEB's Machinery Exchange

    Marunaka Edge Press With Heated Platen Listing #555301 Listed on: 03/19 ...
    Marunaka Edge Press With Heated Platen : WOODWEB's Machinery Exchange

    Frame Saw Listing #555300 Listed on: 03/19 ...
    Frame Saw : WOODWEB's Machinery Exchange

    Coral AF4C 4 Stack, Filter Bag / Bottom Collection Dust Cullector, 2000, 7.5HP, Cleaned, Checked Listing #554973 Listed on: 02/19 ...
    Coral AF4C 4 Stack, Filter Bag / Bottom Collection Dust Cullector, 2000, 7.5HP, Cleaned, Checked : WOODWEB's Machinery Exchange

    2015 Brandt 1440 FC Edition with Airtec Listing #554966 Listed on: 02/19 ...
    2015 Brandt 1440 FC Edition with Airtec : WOODWEB's Machinery Exchange

    Voorwood M 15A CNC Round End Tenoner & Mortiser for 45° Door Listing #554970 Listed on: 02/19 ...
    Voorwood M 15A CNC Round End Tenoner & Mortiser for 45° Door : WOODWEB's Machinery Exchange

    Scm SIGMA IMPACT Front Load Panel Saw Listing #554969 Listed on: 02/19 ...
    Scm SIGMA IMPACT Front Load Panel Saw : WOODWEB's Machinery Exchange

    Crouch 315 Feed Through Shape and Sand Listing #554971 Listed on: 02/19 ...
    Crouch 315 Feed Through Shape and Sand : WOODWEB's Machinery Exchange

    Unique 313 Mitered Door Machine Listing #554965 Listed on: 02/19 ...
    Unique 313 Mitered Door Machine : WOODWEB's Machinery Exchange

    Brand New Belfab BEL-150 15HP, Listing #554964 Listed on: 02/19 ...
    Brand New Belfab BEL-150 15HP, : WOODWEB's Machinery Exchange

    Bini Mortiser Listing #554967 Listed on: 02/19 ...
    Bini Mortiser : WOODWEB's Machinery Exchange

    934 Weinig Knife Grinding Machine Listing #555293 Listed on: 03/18 ...
    934 Weinig Knife Grinding Machine : WOODWEB's Machinery Exchange

    Rangate versatile Cabinet Set | 6 Interchangeable Profiles available Listing #554959 Listed on: 02/18 ...
    Rangate versatile Cabinet Set | 6 Interchangeable Profiles available : WOODWEB's Machinery Exchange

    Biesse Akron 1330 A Edge Bander Listing #554962 Listed on: 02/18 ...
    Biesse Akron 1330 A Edge Bander : WOODWEB's Machinery Exchange

    DUCT AND FITTINGS Listing #554958 Listed on: 02/18 ...
    DUCT AND FITTINGS : WOODWEB's Machinery Exchange

    Biesse Brema EKO 2.1 Vertical CNC Listing #554963 Listed on: 02/18 ...
    Biesse Brema EKO 2.1 Vertical CNC : WOODWEB's Machinery Exchange

    QUINCY VACUUM PUMP Listing #554957 Listed on: 02/18 ...
    QUINCY VACUUM PUMP : WOODWEB's Machinery Exchange

    2012 Weeke Model Optimat ABD050 Boring and Dowel Insertion Machine Listing #555578 Listed on: 04/12 ...
    2012 Weeke Model Optimat ABD050 Boring and Dowel Insertion Machine : WOODWEB's Machinery Exchange

    3.5Ft Heavy Duty Belted 14"x42" Conveyor, 3/4HP, 115V, 1PH, For/Rev, Adjustable legs Listing #555637 Listed on: 04/17 ...
    3.5Ft Heavy Duty Belted 14"x42" Conveyor, 3/4HP, 115V, 1PH, For/Rev, Adjustable legs : WOODWEB's Machinery Exchange

    Oliver 399-D Planer (18" straight knives) Listing #555624 Listed on: 04/17 ...
    Oliver 399-D Planer (18" straight knives) : WOODWEB's Machinery Exchange

    Oliver 399-D Planer (18" straight knives) Listing #555623 Listed on: 04/17 ...
    Oliver 399-D Planer (18" straight knives) : WOODWEB's Machinery Exchange

    Roblan combination machine; saw -shaper- jointer- planer- borer- mortisor Listing #555635 Listed on: 04/17 ...
    Roblan combination machine; saw -shaper- jointer- planer- borer- mortisor : WOODWEB's Machinery Exchange

    Grizzly 25" industrial planer- helical carbide head Listing #555625 Listed on: 04/17 ...
    Grizzly 25" industrial planer- helical carbide head : WOODWEB's Machinery Exchange

    PRODUCTION 15" vertical belt sander-tilting table Listing #555628 Listed on: 04/17 ...
    PRODUCTION 15" vertical belt sander-tilting table : WOODWEB's Machinery Exchange

    Timesaver 36" twin head wide belt sander-drum and platen Listing #555629 Listed on: 04/17 ...
    Timesaver 36" twin head wide belt sander-drum and platen : WOODWEB's Machinery Exchange

    Ritter best oscillating edge sander Listing #555638 Listed on: 04/17 ...
    Ritter best oscillating edge sander : WOODWEB's Machinery Exchange

    Diehl straight line rip saw Listing #555634 Listed on: 04/17 ...
    Diehl straight line rip saw : WOODWEB's Machinery Exchange

    Grizzly sliding panel saw Listing #555636 Listed on: 04/17 ...
    Grizzly sliding panel saw : WOODWEB's Machinery Exchange

    Intorex hydraulic copy/tracing lathe sander Listing #555626 Listed on: 04/17 ...
    Intorex hydraulic copy/tracing lathe sander : WOODWEB's Machinery Exchange

    Quick glue spreader Listing #555640 Listed on: 04/17 ...
    Quick glue spreader : WOODWEB's Machinery Exchange

    Dodds- set- dovetail machines Listing #555633 Listed on: 04/17 ...
    Dodds- set- dovetail machines : WOODWEB's Machinery Exchange

    Biessie 63 spindle -multi spindle borer Listing #555631 Listed on: 04/17 ...
    Biessie 63 spindle -multi spindle borer : WOODWEB's Machinery Exchange

    Oakley edge sander Listing #555632 Listed on: 04/17 ...
    Oakley edge sander : WOODWEB's Machinery Exchange

    Taylor (6) section clamp carrier Listing #555627 Listed on: 04/17 ...
    Taylor (6) section clamp carrier : WOODWEB's Machinery Exchange

    Cehisa PRO-12 CONCEPT Edgebander Listing #555284 Listed on: 03/17 ...
    Cehisa PRO-12 CONCEPT Edgebander : WOODWEB's Machinery Exchange

    BORING MACHINE 23 Listing #555281 Listed on: 03/17 ...
    BORING MACHINE 23 : WOODWEB's Machinery Exchange

    BORING MACHINE 23 Listing #554947 Listed on: 02/17 ...
    BORING MACHINE 23 : WOODWEB's Machinery Exchange

    New Work Lift Tables Listing #555290 Listed on: 03/17 ...
    New Work Lift Tables : WOODWEB's Machinery Exchange

    Delta 43-431X Shaper Listing #555277 Listed on: 03/17 ...
    Delta 43-431X Shaper : WOODWEB's Machinery Exchange

    Delta 43-431X Shaper Listing #554950 Listed on: 02/17 ...
    Delta 43-431X Shaper : WOODWEB's Machinery Exchange

    Felder G 330 Automatic Banding Machine (Edgebander) Listing #555276 Listed on: 03/17 ...
    Felder G 330 Automatic Banding Machine (Edgebander) : WOODWEB's Machinery Exchange

    Dust Collector with 2M Canister Kit Listing #555279 Listed on: 03/17 ...
    Dust Collector with 2M Canister Kit : WOODWEB's Machinery Exchange

    Dust Collector with 2M Canister Kit Listing #554949 Listed on: 02/17 ...
    Dust Collector with 2M Canister Kit : WOODWEB's Machinery Exchange

    CANTEK HB600A 24″ Bandsaw / Resaw Listing #555278 Listed on: 03/17 ...
    CANTEK HB600A 24″ Bandsaw / Resaw : WOODWEB's Machinery Exchange

    Mar-Bel TTLS Tilting Table Laminate Slitter Listing #555283 Listed on: 03/17 ...
    Mar-Bel TTLS Tilting Table Laminate Slitter : WOODWEB's Machinery Exchange

    Oscillating Drill Press – Model W1668 (2016) Listing #555270 Listed on: 03/17 ...
    Oscillating Drill Press – Model W1668 (2016) : WOODWEB's Machinery Exchange

    Unique 280-6-9 Door Clamp Listing #555282 Listed on: 03/17 ...
    Unique 280-6-9 Door Clamp : WOODWEB's Machinery Exchange

    Meber 400 Professional Vertical Bandsaw Listing #555280 Listed on: 03/17 ...
    Meber 400 Professional Vertical Bandsaw : WOODWEB's Machinery Exchange

    Two station inline moulding sander using a stroke motion Listing #555287 Listed on: 03/17 ...
    Two station inline moulding sander using a stroke motion : WOODWEB's Machinery Exchange

    Finger jointing equipment CKM FJ - 17 Listing #555285 Listed on: 03/17 ...
    Finger jointing equipment CKM FJ - 17 : WOODWEB's Machinery Exchange

    32mm horizontal line boring machine 23 spindles Listing #555289 Listed on: 03/17 ...
    32mm horizontal line boring machine 23 spindles : WOODWEB's Machinery Exchange

    Horizontal clamp carrier by Taylor Listing #555288 Listed on: 03/17 ...
    Horizontal clamp carrier by Taylor : WOODWEB's Machinery Exchange

    Biesse Jade 240 Edgebander Listing #554945 Listed on: 02/17 ...
    Biesse Jade 240 Edgebander : WOODWEB's Machinery Exchange

    Griggio SC 3200 Sliding Table Saw Listing #554943 Listed on: 02/17 ...
    Griggio SC 3200 Sliding Table Saw : WOODWEB's Machinery Exchange

    Pendu 3800C Stake Pointer Listing #554939 Listed on: 02/17 ...
    Pendu 3800C Stake Pointer : WOODWEB's Machinery Exchange

    Stanza Cabinet Door Brush Sander Listing #554946 Listed on: 02/17 ...
    Stanza Cabinet Door Brush Sander : WOODWEB's Machinery Exchange

    Felder G 330 Automatic Banding Machine (Edgebander) Listing #554953 Listed on: 02/17 ...
    Felder G 330 Automatic Banding Machine (Edgebander) : WOODWEB's Machinery Exchange

    CANTEK HB600A 24″ Bandsaw / Resaw Listing #554954 Listed on: 02/17 ...
    CANTEK HB600A 24″ Bandsaw / Resaw : WOODWEB's Machinery Exchange

    Oneida 7.5hp dust collector Listing #554941 Listed on: 02/17 ...
    Oneida 7.5hp dust collector : WOODWEB's Machinery Exchange

    24" Northtech industrial spiral head planer Listing #554890 Listed on: 02/10 ...
    24" Northtech industrial spiral head planer : WOODWEB's Machinery Exchange

    Kay Industries MA-2-R Phase Converter Listing #554940 Listed on: 02/17 ...
    Kay Industries MA-2-R Phase Converter : WOODWEB's Machinery Exchange

    Oscillating Drill Press – Model W1668 (2016) Listing #554956 Listed on: 02/17 ...
    Oscillating Drill Press – Model W1668 (2016) : WOODWEB's Machinery Exchange

    Meber 400 Professional Vertical Bandsaw Listing #554948 Listed on: 02/17 ...
    Meber 400 Professional Vertical Bandsaw : WOODWEB's Machinery Exchange

    L and L hi frequency gluer Listing #554938 Listed on: 02/17 ...
    L and L hi frequency gluer : WOODWEB's Machinery Exchange

    Nedderman S 1000 dust collector SAVE ! Listing #554944 Listed on: 02/17 ...
    Nedderman S 1000 dust collector SAVE ! : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #555255 Listed on: 03/16 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Northtech Model NT DC15SS Dust Collector Listing #555254 Listed on: 03/16 ...
    Northtech Model NT DC15SS Dust Collector : WOODWEB's Machinery Exchange

    Weinig/Dimter Model OptiCut S50 Optimizing Crosscut Saw Listing #555260 Listed on: 03/16 ...
    Weinig/Dimter Model OptiCut S50 Optimizing Crosscut Saw : WOODWEB's Machinery Exchange

    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Listing #555263 Listed on: 03/16 ...
    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw : WOODWEB's Machinery Exchange

    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Listing #555261 Listed on: 03/16 ...
    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine : WOODWEB's Machinery Exchange

    Oliver Model 2072 30" Straitoplane Double Sided Planer Listing #555259 Listed on: 03/16 ...
    Oliver Model 2072 30" Straitoplane Double Sided Planer : WOODWEB's Machinery Exchange

    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) Listing #555267 Listed on: 03/16 ...
    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) : WOODWEB's Machinery Exchange

    Giben G2 Genesis 48 CNC Router Listing #555262 Listed on: 03/16 ...
    Giben G2 Genesis 48 CNC Router : WOODWEB's Machinery Exchange

    Cantek Model EM-12 Through-Feed End Matcher Listing #555266 Listed on: 03/16 ...
    Cantek Model EM-12 Through-Feed End Matcher : WOODWEB's Machinery Exchange

    Cehisa PRO 8 Edgebander Listing #555269 Listed on: 03/16 ...
    Cehisa PRO 8 Edgebander : WOODWEB's Machinery Exchange

    Casolin Model Astra DGTI Sliding Table Saw Listing #555264 Listed on: 03/16 ...
    Casolin Model Astra DGTI Sliding Table Saw : WOODWEB's Machinery Exchange

    Orion Turntable Pallet Wrapper Listing #555257 Listed on: 03/16 ...
    Orion Turntable Pallet Wrapper : WOODWEB's Machinery Exchange

    2025 Cantek JDT75 Dovetail Machine for sale Listing #554934 Listed on: 02/16 ...
    2025 Cantek JDT75 Dovetail Machine for sale : WOODWEB's Machinery Exchange

    AMP Mitre-Mite VN4 Underpinner V-Nailer Listing #555258 Listed on: 03/16 ...
    AMP Mitre-Mite VN4 Underpinner V-Nailer : WOODWEB's Machinery Exchange

    Thai Feng Model TF-700 Resaw Listing #555265 Listed on: 03/16 ...
    Thai Feng Model TF-700 Resaw : WOODWEB's Machinery Exchange

    CTD Model D45X Double Miter Saw Listing #555256 Listed on: 03/16 ...
    CTD Model D45X Double Miter Saw : WOODWEB's Machinery Exchange

    Timesaver Model 23 Widebelt/Orbital Sander Listing #555268 Listed on: 03/16 ...
    Timesaver Model 23 Widebelt/Orbital Sander : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #554919 Listed on: 02/16 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Homag Optimat ABD050 Bore/Dowel Machine Listing #554935 Listed on: 02/16 ...
    Homag Optimat ABD050 Bore/Dowel Machine : WOODWEB's Machinery Exchange

    Northtech Model NT DC15SS Dust Collector Listing #554918 Listed on: 02/16 ...
    Northtech Model NT DC15SS Dust Collector : WOODWEB's Machinery Exchange

    Weinig/Dimter Model OptiCut S50 Optimizing Crosscut Saw Listing #554922 Listed on: 02/16 ...
    Weinig/Dimter Model OptiCut S50 Optimizing Crosscut Saw : WOODWEB's Machinery Exchange

    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Listing #554925 Listed on: 02/16 ...
    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw : WOODWEB's Machinery Exchange

    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Listing #554923 Listed on: 02/16 ...
    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine : WOODWEB's Machinery Exchange

    Oliver Model 2072 30" Straitoplane Double Sided Planer Listing #554931 Listed on: 02/16 ...
    Oliver Model 2072 30" Straitoplane Double Sided Planer : WOODWEB's Machinery Exchange

    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) Listing #554930 Listed on: 02/16 ...
    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) : WOODWEB's Machinery Exchange

    Giben G2 Genesis 48 CNC Router Listing #554924 Listed on: 02/16 ...
    Giben G2 Genesis 48 CNC Router : WOODWEB's Machinery Exchange

    Cantek Model EM-12 Through-Feed End Matcher Listing #554929 Listed on: 02/16 ...
    Cantek Model EM-12 Through-Feed End Matcher : WOODWEB's Machinery Exchange

    Casolin Model Astra DGTI Sliding Table Saw Listing #554927 Listed on: 02/16 ...
    Casolin Model Astra DGTI Sliding Table Saw : WOODWEB's Machinery Exchange

    Porter Model 300C 20" Jointer Listing #554926 Listed on: 02/16 ...
    Porter Model 300C 20" Jointer : WOODWEB's Machinery Exchange

    Thai Feng Model TF-700 Resaw Listing #554928 Listed on: 02/16 ...
    Thai Feng Model TF-700 Resaw : WOODWEB's Machinery Exchange

    Oliver Model 299-D Single-Sided Planer Listing #554921 Listed on: 02/16 ...
    Oliver Model 299-D Single-Sided Planer : WOODWEB's Machinery Exchange

    Tannewitz Model GH 36" Bandsaw Listing #554920 Listed on: 02/16 ...
    Tannewitz Model GH 36" Bandsaw : WOODWEB's Machinery Exchange

    24" Kindt Collins Master disc sander Listing #554936 Listed on: 02/16 ...
    24" Kindt Collins Master disc sander : WOODWEB's Machinery Exchange

    2014 Grizzly G0610 Dovetail Machine for sale Listing #554937 Listed on: 02/16 ...
    2014 Grizzly G0610 Dovetail Machine for sale : WOODWEB's Machinery Exchange

    Brandt KDF 650 2C Edgebander Listing #555616 Listed on: 04/15 ...
    Brandt KDF 650 2C Edgebander : WOODWEB's Machinery Exchange

    Coral AF4C 4 Stack, Filter Bag / Bottom Collection Dust Cullector, 2000, 7.5HP, Cleaned, Checked Listing #555617 Listed on: 04/15 ...
    Coral AF4C 4 Stack, Filter Bag / Bottom Collection Dust Cullector, 2000, 7.5HP, Cleaned, Checked : WOODWEB's Machinery Exchange

    Tilt and Turn window tooling Listing #555606 Listed on: 04/15 ...
    Tilt and Turn window tooling : WOODWEB's Machinery Exchange

    2021 Ironwood SL 100 10' sliding table saw Listing #555609 Listed on: 04/15 ...
    2021 Ironwood SL 100 10' sliding table saw : WOODWEB's Machinery Exchange

    SAC P 3 Profiler Listing #555605 Listed on: 04/15 ...
    SAC P 3 Profiler : WOODWEB's Machinery Exchange

    Casolin ASTRA DIGIT 3200 Sliding Panel Saw Listing #555610 Listed on: 04/15 ...
    Casolin ASTRA DIGIT 3200 Sliding Panel Saw : WOODWEB's Machinery Exchange

    Price Drop! Delta Unisaw 10” Cabinet Table Saw – 3HP Motor + Biesemeyer Fence Listing #555465 Listed on: 04/04 ...
    Price Drop! Delta Unisaw 10” Cabinet Table Saw – 3HP Motor + Biesemeyer Fence : WOODWEB's Machinery Exchange

    Northfield 36" Band Saw Listing #555618 Listed on: 04/15 ...
    Northfield 36" Band Saw : WOODWEB's Machinery Exchange

    Used 2019 SCM Morbidelli CX100 Listing #555622 Listed on: 04/15 ...
    Used 2019 SCM Morbidelli CX100 : WOODWEB's Machinery Exchange

    Biesse FSE Semi-automatic Bore, Glue & Dowel Inserter Listing #555615 Listed on: 04/15 ...
    Biesse FSE Semi-automatic Bore, Glue & Dowel Inserter : WOODWEB's Machinery Exchange

    SCMI S520 Planer Listing #555620 Listed on: 04/15 ...
    SCMI S520 Planer : WOODWEB's Machinery Exchange

    Fukami Straight Line Rip Saw Listing #555621 Listed on: 04/15 ...
    Fukami Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Ayen OSB23 Line Boring Listing #555608 Listed on: 04/15 ...
    Ayen OSB23 Line Boring : WOODWEB's Machinery Exchange

    Felins Rotary Stretch Wrapper Listing #555611 Listed on: 04/15 ...
    Felins Rotary Stretch Wrapper : WOODWEB's Machinery Exchange

    Schiele Vacuum Coater Listing #555614 Listed on: 04/15 ...
    Schiele Vacuum Coater : WOODWEB's Machinery Exchange

    Homag CNC with Pushoff and Outfeed Conveyor Listing #555619 Listed on: 04/15 ...
    Homag CNC with Pushoff and Outfeed Conveyor : WOODWEB's Machinery Exchange

    CNC Aggregate Listing #555607 Listed on: 04/15 ...
    CNC Aggregate : WOODWEB's Machinery Exchange

    2022 SCM Action TF2500 Feed Through Automatic Case Clamp Listing #555238 Listed on: 03/15 ...
    2022 SCM Action TF2500 Feed Through Automatic Case Clamp : WOODWEB's Machinery Exchange

    2018 PMK C-1205 HSK SERVO End Matcher Twin 16HP Spindles Listing #555239 Listed on: 03/15 ...
    2018 PMK C-1205 HSK SERVO End Matcher Twin 16HP Spindles : WOODWEB's Machinery Exchange

    2022 ROGERS 20HP + 2019 ROGERS 20 HP Rotary Screw Compressors + Tank and Dryer Listing #555234 Listed on: 03/15 ...
    2022 ROGERS 20HP + 2019 ROGERS 20 HP Rotary Screw Compressors + Tank and Dryer : WOODWEB's Machinery Exchange

    2003 RITTER / CROUCH CR CR354 PROFILE SANDER - INVERTER CONTROLLED VARIABLE SPD. Listing #555236 Listed on: 03/15 ...
    2003 RITTER / CROUCH CR CR354 PROFILE SANDER - INVERTER CONTROLLED VARIABLE SPD. : WOODWEB's Machinery Exchange

    2007 Gannomat Index 230 Trend CNC Bore / Dowel Inserter Listing #555235 Listed on: 03/15 ...
    2007 Gannomat Index 230 Trend CNC Bore / Dowel Inserter : WOODWEB's Machinery Exchange

    2015 Grizzly G4185 Horizontal Boring Machine x Two Units Listing #555237 Listed on: 03/15 ...
    2015 Grizzly G4185 Horizontal Boring Machine x Two Units : WOODWEB's Machinery Exchange

    AES SIRIUS 950M - ATC CNC Machining Center (Feed Thru) Listing #555599 Listed on: 04/14 ...
    AES SIRIUS 950M - ATC CNC Machining Center (Feed Thru) : WOODWEB's Machinery Exchange

    Biesse SKIPPER 100 CNC Machining Center Listing #555598 Listed on: 04/14 ...
    Biesse SKIPPER 100 CNC Machining Center : WOODWEB's Machinery Exchange

    Cantek D405A Sliding Table Saw Listing #555603 Listed on: 04/14 ...
    Cantek D405A Sliding Table Saw : WOODWEB's Machinery Exchange

    Lane Mfg. Wood 27" Single Sided Planer Listing #555602 Listed on: 04/14 ...
    Lane Mfg. Wood 27" Single Sided Planer : WOODWEB's Machinery Exchange

    Whirlwind 212L Upcut Cut Off Saw with Feed Tables and Phase Converter Listing #555601 Listed on: 04/14 ...
    Whirlwind 212L Upcut Cut Off Saw with Feed Tables and Phase Converter : WOODWEB's Machinery Exchange

    SAC T.4 Single End Tenoner Listing #555604 Listed on: 04/14 ...
    SAC T.4 Single End Tenoner : WOODWEB's Machinery Exchange

    Used Sliding Table Saw Listing #555233 Listed on: 03/14 ...
    Used Sliding Table Saw : WOODWEB's Machinery Exchange

    Felins Rotary Stretch Wrapper Listing #554903 Listed on: 02/14 ...
    Felins Rotary Stretch Wrapper : WOODWEB's Machinery Exchange

    Schiele Vacuum Coater Listing #554901 Listed on: 02/14 ...
    Schiele Vacuum Coater : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #555580 Listed on: 04/13 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Northtech Model NT DC15SS Dust Collector Listing #555579 Listed on: 04/13 ...
    Northtech Model NT DC15SS Dust Collector : WOODWEB's Machinery Exchange

    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Listing #555588 Listed on: 04/13 ...
    Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw : WOODWEB's Machinery Exchange

    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Listing #555586 Listed on: 04/13 ...
    Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine : WOODWEB's Machinery Exchange

    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) Listing #555592 Listed on: 04/13 ...
    L & L Machinery Du-All Radio Frequency Gluer (Easel Style) : WOODWEB's Machinery Exchange

    Oliver Model 2072 30" Straitoplane Double Sided Planer Listing #555585 Listed on: 04/13 ...
    Oliver Model 2072 30" Straitoplane Double Sided Planer : WOODWEB's Machinery Exchange

    Taylor 30 Section Automated Clamp Carrier 36” Clamps Listing #555581 Listed on: 04/13 ...
    Taylor 30 Section Automated Clamp Carrier 36” Clamps : WOODWEB's Machinery Exchange

    Giben G2 Genesis 48 CNC Router Listing #555587 Listed on: 04/13 ...
    Giben G2 Genesis 48 CNC Router : WOODWEB's Machinery Exchange

    Cantek Model EM-12 Through-Feed End Matcher Listing #555591 Listed on: 04/13 ...
    Cantek Model EM-12 Through-Feed End Matcher : WOODWEB's Machinery Exchange

    Casolin Model Astra DGTI Sliding Table Saw Listing #555589 Listed on: 04/13 ...
    Casolin Model Astra DGTI Sliding Table Saw : WOODWEB's Machinery Exchange

    Orion Turntable Pallet Wrapper Listing #555584 Listed on: 04/13 ...
    Orion Turntable Pallet Wrapper : WOODWEB's Machinery Exchange

    BIESSE FLAT TABLE CNC ROUTER/MACHINING CENTER Listing #555596 Listed on: 04/13 ...
    BIESSE FLAT TABLE CNC ROUTER/MACHINING CENTER : WOODWEB's Machinery Exchange

    Thai Feng Model TF-700 Resaw Listing #555590 Listed on: 04/13 ...
    Thai Feng Model TF-700 Resaw : WOODWEB's Machinery Exchange

    CTD Model D45X Double Miter Saw Listing #555583 Listed on: 04/13 ...
    CTD Model D45X Double Miter Saw : WOODWEB's Machinery Exchange

    Taylor 20 Section 16.5' Wide Clamp Carrier Listing #555582 Listed on: 04/13 ...
    Taylor 20 Section 16.5' Wide Clamp Carrier : WOODWEB's Machinery Exchange

    BIESSE FLAT TABLE CNC ROUTER/MACHINING CENTER Listing #555463 Listed on: 04/03 ...
    BIESSE FLAT TABLE CNC ROUTER/MACHINING CENTER : WOODWEB's Machinery Exchange

    3 HP Lobo Shaper with 1/4 HP Grizzly Power Feeder Listing #555594 Listed on: 04/13 ...
    3 HP Lobo Shaper with 1/4 HP Grizzly Power Feeder : WOODWEB's Machinery Exchange

    GRIGGO GAL/P LOUVER GROOVER Listing #555595 Listed on: 04/13 ...
    GRIGGO GAL/P LOUVER GROOVER : WOODWEB's Machinery Exchange

    Paoloni S150 Sliding Table Saw Listing #555593 Listed on: 04/13 ...
    Paoloni S150 Sliding Table Saw : WOODWEB's Machinery Exchange

    Boarke BKM 37RK Wide Belt Sander Listing #555223 Listed on: 03/13 ...
    Boarke BKM 37RK Wide Belt Sander : WOODWEB's Machinery Exchange

    Extrema DCY-1425 Typhoon Dust Collector Listing #555230 Listed on: 03/13 ...
    Extrema DCY-1425 Typhoon Dust Collector : WOODWEB's Machinery Exchange

    Central Machinery Co. Model 284 Mortiser Listing #555224 Listed on: 03/13 ...
    Central Machinery Co. Model 284 Mortiser : WOODWEB's Machinery Exchange

    SCMI F3A Listing #555228 Listed on: 03/13 ...
    SCMI F3A : WOODWEB's Machinery Exchange

    Omga MEC 300ST Miter Saw Listing #555227 Listed on: 03/13 ...
    Omga MEC 300ST Miter Saw : WOODWEB's Machinery Exchange

    Conquest 2-46 Dual Line Boring Machine Listing #555226 Listed on: 03/13 ...
    Conquest 2-46 Dual Line Boring Machine : WOODWEB's Machinery Exchange

    Castle TSM-22 Pocket Borer Listing #555225 Listed on: 03/13 ...
    Castle TSM-22 Pocket Borer : WOODWEB's Machinery Exchange

    SCMI SC600 Bandsaw Listing #555229 Listed on: 03/13 ...
    SCMI SC600 Bandsaw : WOODWEB's Machinery Exchange

    ORTON TYPE "F" TILTING SPINDLE SHIP SHAPER/ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION Listing #554798 Listed on: 02/04 ...
    ORTON TYPE "F" TILTING SPINDLE SHIP SHAPER/ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    ONSRUD RADIAL ARM ROUTERS (2) - EXCELLENT CONDITION Listing #554799 Listed on: 02/04 ...
    ONSRUD RADIAL ARM ROUTERS (2) - EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    OLIVER 92-D MORTISER, EXCELLENT CONDITION, HARD TO FIND Listing #554795 Listed on: 02/04 ...
    OLIVER 92-D MORTISER, EXCELLENT CONDITION, HARD TO FIND : WOODWEB's Machinery Exchange

    2020 Voorwood A26 Dual Spindle Coping Shaper (Unlimited Length) Listing #555575 Listed on: 04/12 ...
    2020 Voorwood A26 Dual Spindle Coping Shaper (Unlimited Length) : WOODWEB's Machinery Exchange

    2018 SCM nova si 400 Sliding Table Saw W/DRO’s(11hp/16″ Blade) Listing #555577 Listed on: 04/12 ...
    2018 SCM nova si 400 Sliding Table Saw W/DRO’s(11hp/16″ Blade) : WOODWEB's Machinery Exchange

    2021 Koch Sprint-FC Select Line Shaping Machine for French Cut Fronts (CNC Hauncher) Listing #555570 Listed on: 04/12 ...
    2021 Koch Sprint-FC Select Line Shaping Machine for French Cut Fronts (CNC Hauncher) : WOODWEB's Machinery Exchange

    Lobo LH-40TC Auto Copy Shaping Machine (1-1/4″ spindles) Listing #555574 Listed on: 04/12 ...
    Lobo LH-40TC Auto Copy Shaping Machine (1-1/4″ spindles) : WOODWEB's Machinery Exchange

    MAX Lift Table 6,000 LB 25 X 48″ Lift Table (1) Available) Listing #555567 Listed on: 04/12 ...
    MAX Lift Table 6,000 LB 25 X 48″ Lift Table (1) Available) : WOODWEB's Machinery Exchange

    Josting EFS 3600 Veneer Guillotine Listing #555569 Listed on: 04/12 ...
    Josting EFS 3600 Veneer Guillotine : WOODWEB's Machinery Exchange

    Diehl 75 Straight Line Rip Saw Listing #555568 Listed on: 04/12 ...
    Diehl 75 Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Stenner VHJ 105 – 42″ Vertical Resaw Listing #555576 Listed on: 04/12 ...
    Stenner VHJ 105 – 42″ Vertical Resaw : WOODWEB's Machinery Exchange

    Whirlwind 212R 18″ Upcut Saw Listing #555565 Listed on: 04/12 ...
    Whirlwind 212R 18″ Upcut Saw : WOODWEB's Machinery Exchange

    Black Bros 40C Table Top Glue Spreader Listing #555572 Listed on: 04/12 ...
    Black Bros 40C Table Top Glue Spreader : WOODWEB's Machinery Exchange

    2013 Italpresse Primatist 25-L Case Clamp Listing #555573 Listed on: 04/12 ...
    2013 Italpresse Primatist 25-L Case Clamp : WOODWEB's Machinery Exchange

    WEINIG OptiControl 970 Powerlock W/3 Arbors & PC Listing #555571 Listed on: 04/12 ...
    WEINIG OptiControl 970 Powerlock W/3 Arbors & PC : WOODWEB's Machinery Exchange

    2017 Becker Rotary Vane Vacuum Pump KVT 3.100 3.5 kW/5 HP Listing #555566 Listed on: 04/12 ...
    2017 Becker Rotary Vane Vacuum Pump KVT 3.100 3.5 kW/5 HP : WOODWEB's Machinery Exchange

    Felder F700z Listing #555459 Listed on: 04/03 ...
    Felder F700z : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD Listing #555216 Listed on: 03/12 ...
    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD Listing #555215 Listed on: 03/12 ...
    PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD : WOODWEB's Machinery Exchange

    PALLET DISMANTLER / DISASSEMBLER - 10 HP ELECTRIC MOTOR Listing #555213 Listed on: 03/12 ...
    PALLET DISMANTLER / DISASSEMBLER - 10 HP ELECTRIC MOTOR : WOODWEB's Machinery Exchange

    PALLET DISMANTLER / DISASSEMBLER - 13 HP GASOLINE MOTOR Listing #555214 Listed on: 03/12 ...
    PALLET DISMANTLER / DISASSEMBLER - 13 HP GASOLINE MOTOR : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - GASOLINE MOTOR Listing #555217 Listed on: 03/12 ...
    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - GASOLINE MOTOR : WOODWEB's Machinery Exchange

    Industrial Resources PASS ONE Pallet Dismantler Listing #555218 Listed on: 03/12 ...
    Industrial Resources PASS ONE Pallet Dismantler : WOODWEB's Machinery Exchange

    Felder K700S Sliding Table Saw-230V Single Phase Listing #555191 Listed on: 03/10 ...
    Felder K700S Sliding Table Saw-230V Single Phase : WOODWEB's Machinery Exchange

    Used frame/door press Listing #555220 Listed on: 03/12 ...
    Used frame/door press : WOODWEB's Machinery Exchange

    Homag HKL 400/43/22/X Angular Panel Saw Listing #554896 Listed on: 02/12 ...
    Homag HKL 400/43/22/X Angular Panel Saw : WOODWEB's Machinery Exchange

    Murphy Rodgers MRM-12 Dust collector Listing #554898 Listed on: 02/12 ...
    Murphy Rodgers MRM-12 Dust collector : WOODWEB's Machinery Exchange

    Homag TLF 411 Panel Storage / Loading System Listing #554897 Listed on: 02/12 ...
    Homag TLF 411 Panel Storage / Loading System : WOODWEB's Machinery Exchange

    2022 SCM Action TF2500 Feed Through Automatic Case Clamp Listing #555560 Listed on: 04/11 ...
    2022 SCM Action TF2500 Feed Through Automatic Case Clamp : WOODWEB's Machinery Exchange

    2018 PMK C-1205 HSK SERVO End Matcher Twin 16HP Spindles Listing #555559 Listed on: 04/11 ...
    2018 PMK C-1205 HSK SERVO End Matcher Twin 16HP Spindles : WOODWEB's Machinery Exchange

    2022 ROGERS 20HP + 2019 ROGERS 20 HP Rotary Screw Compressors + Tank and Dryer Listing #555563 Listed on: 04/11 ...
    2022 ROGERS 20HP + 2019 ROGERS 20 HP Rotary Screw Compressors + Tank and Dryer : WOODWEB's Machinery Exchange

    2003 RITTER / CROUCH CR CR354 PROFILE SANDER - INVERTER CONTROLLED VARIABLE SPD. Listing #555562 Listed on: 04/11 ...
    2003 RITTER / CROUCH CR CR354 PROFILE SANDER - INVERTER CONTROLLED VARIABLE SPD. : WOODWEB's Machinery Exchange

    Donaldson Torit open filter dust collector 460 IRD 20 HP Listing #555558 Listed on: 04/11 ...
    Donaldson Torit open filter dust collector 460 IRD 20 HP : WOODWEB's Machinery Exchange

    2007 Gannomat Index 230 Trend CNC Bore / Dowel Inserter Listing #555564 Listed on: 04/11 ...
    2007 Gannomat Index 230 Trend CNC Bore / Dowel Inserter : WOODWEB's Machinery Exchange

    2015 Grizzly G4185 Horizontal Boring Machine x Two Units Listing #555561 Listed on: 04/11 ...
    2015 Grizzly G4185 Horizontal Boring Machine x Two Units : WOODWEB's Machinery Exchange

    Halsty 37" Wide Belt Sander Safety Speed Listing #555362 Listed on: 03/24 ...
    Halsty 37" Wide Belt Sander Safety Speed : WOODWEB's Machinery Exchange

    Oneida 7.5hp dust collector Listing #555557 Listed on: 04/11 ...
    Oneida 7.5hp dust collector : WOODWEB's Machinery Exchange

    Ritter R130 Horizontal Single Spindle Boring Machine, 3/4HP, 1PH, Cleaned, Checked Listing #555212 Listed on: 03/11 ...
    Ritter R130 Horizontal Single Spindle Boring Machine, 3/4HP, 1PH, Cleaned, Checked : WOODWEB's Machinery Exchange

    2016 40" Cantek Planer # LSP1000DHC w/ Digital Read Outs 25hp Listing #555036 Listed on: 02/25 ...
    2016 40" Cantek Planer # LSP1000DHC w/ Digital Read Outs 25hp : WOODWEB's Machinery Exchange

    Donaldson Torit open filter dust collector 460 IRD 20 HP Listing #555211 Listed on: 03/11 ...
    Donaldson Torit open filter dust collector 460 IRD 20 HP : WOODWEB's Machinery Exchange

    AEM 37" Widebelt Sander # 502-37 ~ 2 ~ Head Wired 480 Listing #555200 Listed on: 03/11 ...
    AEM 37" Widebelt Sander # 502-37 ~ 2 ~ Head Wired 480 : WOODWEB's Machinery Exchange

    Oliver # 51-A Swing Lathe 4 speed Direct Drive Motor 20" Swing & 72" Centers Listing #554974 Listed on: 02/19 ...
    Oliver # 51-A Swing Lathe 4 speed Direct Drive Motor 20" Swing & 72" Centers : WOODWEB's Machinery Exchange

    Centauro TC1200 Hydraulic Feed Dual Mechanical Tracer Lathe 220V Listing #555128 Listed on: 03/04 ...
    Centauro TC1200 Hydraulic Feed Dual Mechanical Tracer Lathe 220V : WOODWEB's Machinery Exchange

    Accurate Portable-Cab Door & Tile Measuring System # 901-5220-001-XXL Listing #554889 Listed on: 02/10 ...
    Accurate Portable-Cab Door & Tile Measuring System # 901-5220-001-XXL : WOODWEB's Machinery Exchange

    Buss 4L 30" Planer w/ Grinder & Jointer 220/440V 3ph Listing #555196 Listed on: 03/11 ...
    Buss 4L 30" Planer w/ Grinder & Jointer 220/440V 3ph : WOODWEB's Machinery Exchange

    Cefla Brushtech 4-1 Moulding Sander Listing #554888 Listed on: 02/10 ...
    Cefla Brushtech 4-1 Moulding Sander : WOODWEB's Machinery Exchange

    Centauro AG-125 Tool Grinder Listing #555127 Listed on: 03/04 ...
    Centauro AG-125 Tool Grinder : WOODWEB's Machinery Exchange

    Master / Kindt Collins 24" Disc sander Listing #555198 Listed on: 03/11 ...
    Master / Kindt Collins 24" Disc sander : WOODWEB's Machinery Exchange

    Darex End Mill Tool Sharpener # E85 90 TR W/ Air Spindle Listing #555208 Listed on: 03/11 ...
    Darex End Mill Tool Sharpener # E85 90 TR W/ Air Spindle : WOODWEB's Machinery Exchange

    Wadkin 30" Double Disc Sander # JV534 3ph 220/440V Listing #555204 Listed on: 03/11 ...
    Wadkin 30" Double Disc Sander # JV534 3ph 220/440V : WOODWEB's Machinery Exchange

    Coyer Goodspeed Back Knife Lathe CP168A Listing #555194 Listed on: 03/11 ...
    Coyer Goodspeed Back Knife Lathe CP168A : WOODWEB's Machinery Exchange

    Nandina Inc 4 Speed Power Feeder 3ph ~ 1Hp ~ 220V Listing #555202 Listed on: 03/11 ...
    Nandina Inc 4 Speed Power Feeder 3ph ~ 1Hp ~ 220V : WOODWEB's Machinery Exchange

    Anderson Stratos Pro CNC machines Listing #555192 Listed on: 03/11 ...
    Anderson Stratos Pro CNC machines : WOODWEB's Machinery Exchange

    Rangate Stile and Rail Cabinet Set | Ready to Ship Listing #554892 Listed on: 02/11 ...
    Rangate Stile and Rail Cabinet Set | Ready to Ship : WOODWEB's Machinery Exchange

    HolzHer 1265 SuperCut Vertical Panel Saw Listing #554894 Listed on: 02/11 ...
    HolzHer 1265 SuperCut Vertical Panel Saw : WOODWEB's Machinery Exchange

    Silver SCF-100SR Slat Making Saw, 2003, Multiple blades, 28.5HP, 240V W/Transformer Incl. Listing #554895 Listed on: 02/11 ...
    Silver SCF-100SR Slat Making Saw, 2003, Multiple blades, 28.5HP, 240V W/Transformer Incl. : WOODWEB's Machinery Exchange

    Holz Her 1265S Vertical Panel Saw Listing #554893 Listed on: 02/11 ...
    Holz Her 1265S Vertical Panel Saw : WOODWEB's Machinery Exchange

    Nederman NFPZ with Daytom Blower Dust Collection System Listing #555555 Listed on: 04/10 ...
    Nederman NFPZ with Daytom Blower Dust Collection System : WOODWEB's Machinery Exchange

    Silver SCF-100SR Slat Making Saw, 2003, Multiple blades, 28.5HP, 240V W/Transformer Incl. Listing #555556 Listed on: 04/10 ...
    Silver SCF-100SR Slat Making Saw, 2003, Multiple blades, 28.5HP, 240V W/Transformer Incl. : WOODWEB's Machinery Exchange

    Minimax T-124 Wood copy lathe Listing #555359 Listed on: 03/24 ...
    Minimax T-124 Wood copy lathe : WOODWEB's Machinery Exchange

    Minimax Technomax MB21 Multi boring machine Listing #555358 Listed on: 03/24 ...
    Minimax Technomax MB21 Multi boring machine : WOODWEB's Machinery Exchange

    Kuper veneer stitcher Listing #555546 Listed on: 04/08 ...
    Kuper veneer stitcher : WOODWEB's Machinery Exchange

    Wadkin PBR HD resaw / bandsaw Listing #555357 Listed on: 03/24 ...
    Wadkin PBR HD resaw / bandsaw : WOODWEB's Machinery Exchange

    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT Listing #555554 Listed on: 04/10 ...
    2018 SNX nVision System 2 Twin Arm Contour Edgebander. FACTORY REBUILT : WOODWEB's Machinery Exchange

    Aireworks FX-25-8000 Dust Collector, 25HP, 230V, 3PH, 8,000 CFM, 20 Filter Bags, Low Ceiling Model Listing #555190 Listed on: 03/10 ...
    Aireworks FX-25-8000 Dust Collector, 25HP, 230V, 3PH, 8,000 CFM, 20 Filter Bags, Low Ceiling Model : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SRMG510 3 Axis CNC Router Listing #555187 Listed on: 03/10 ...
    CNC Auto-Motion Model SRMG510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    CNC Auto-Motion RG-XHD510 3 Axis CNC Router Listing #555189 Listed on: 03/10 ...
    CNC Auto-Motion RG-XHD510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder Listing #555188 Listed on: 03/10 ...
    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SR-59 3 Axis CNC Router Listing #555186 Listed on: 03/10 ...
    CNC Auto-Motion Model SR-59 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Whitney 50" Single Surface Planer Listing #555185 Listed on: 03/10 ...
    Whitney 50" Single Surface Planer : WOODWEB's Machinery Exchange

    Mereen Johnson 419 DC Listing #555184 Listed on: 03/10 ...
    Mereen Johnson 419 DC : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SRMG510 3 Axis CNC Router Listing #554882 Listed on: 02/10 ...
    CNC Auto-Motion Model SRMG510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    CNC Auto-Motion RG-XHD510 3 Axis CNC Router Listing #554884 Listed on: 02/10 ...
    CNC Auto-Motion RG-XHD510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder Listing #554883 Listed on: 02/10 ...
    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SR-59 3 Axis CNC Router Listing #554881 Listed on: 02/10 ...
    CNC Auto-Motion Model SR-59 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Whitney 50" Single Surface Planer Listing #554880 Listed on: 02/10 ...
    Whitney 50" Single Surface Planer : WOODWEB's Machinery Exchange

    powermatic pm 66 Listing #554887 Listed on: 02/10 ...
    powermatic pm 66 : WOODWEB's Machinery Exchange

    powermatic pm 66 Listing #554886 Listed on: 02/10 ...
    powermatic pm 66 : WOODWEB's Machinery Exchange

    Delta Shaper 43-372, 3/4" Spindle, 1985, 3HP, 230V, 3PH, New Belt, Spindle Bearings Listing #555551 Listed on: 04/09 ...
    Delta Shaper 43-372, 3/4" Spindle, 1985, 3HP, 230V, 3PH, New Belt, Spindle Bearings : WOODWEB's Machinery Exchange

    Used Sliding Table Saw Listing #555549 Listed on: 04/09 ...
    Used Sliding Table Saw : WOODWEB's Machinery Exchange

    New Work Lift Tables Listing #555548 Listed on: 04/09 ...
    New Work Lift Tables : WOODWEB's Machinery Exchange

    Biesse Rover A 1659 Pod and Rail 5 Axis - Vancouver, BC Listing #555553 Listed on: 04/09 ...
    Biesse Rover A 1659 Pod and Rail 5 Axis - Vancouver, BC : WOODWEB's Machinery Exchange

    Virutex Edge Bander with table Listing #555550 Listed on: 04/09 ...
    Virutex Edge Bander with table : WOODWEB's Machinery Exchange

    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! Listing #555177 Listed on: 03/09 ...
    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! : WOODWEB's Machinery Exchange

    L & L Machinery GA-100 High Frequency Gluer Listing #555175 Listed on: 03/09 ...
    L & L Machinery GA-100 High Frequency Gluer : WOODWEB's Machinery Exchange

    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander Listing #555170 Listed on: 03/09 ...
    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander : WOODWEB's Machinery Exchange

    Progressive Systems Model SB/D-31RH 31" Fixed Arbor Gang Rip Saw Listing #555171 Listed on: 03/09 ...
    Progressive Systems Model SB/D-31RH 31" Fixed Arbor Gang Rip Saw : WOODWEB's Machinery Exchange

    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw Listing #555174 Listed on: 03/09 ...
    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw : WOODWEB's Machinery Exchange

    Toolex Tool Stand / Tool Vise, Model TS RWS-6008, Re Lock 8 Station Vise, Jaws Listing #555183 Listed on: 03/09 ...
    Toolex Tool Stand / Tool Vise, Model TS RWS-6008, Re Lock 8 Station Vise, Jaws : WOODWEB's Machinery Exchange

    Wysong and Miles Model 600 & 601 Dovetailers Listing #555169 Listed on: 03/09 ...
    Wysong and Miles Model 600 & 601 Dovetailers : WOODWEB's Machinery Exchange

    Hammer C3-31 Comfort 5 station combination woodworking machine Listing #555053 Listed on: 02/28 ...
    Hammer C3-31 Comfort 5 station combination woodworking machine : WOODWEB's Machinery Exchange

    TigerStop Model TSS 1000 Automated Optimizing Push Feed Saw - 2021! Listing #555176 Listed on: 03/09 ...
    TigerStop Model TSS 1000 Automated Optimizing Push Feed Saw - 2021! : WOODWEB's Machinery Exchange

    Black Brothers 32" Reverse Roller Coat Laminator Listing #555173 Listed on: 03/09 ...
    Black Brothers 32" Reverse Roller Coat Laminator : WOODWEB's Machinery Exchange

    Fletcher EZ-Door Raised Panel Door Machine Listing #555172 Listed on: 03/09 ...
    Fletcher EZ-Door Raised Panel Door Machine : WOODWEB's Machinery Exchange

    Baker Model A Single Head Resaw Listing #555167 Listed on: 03/09 ...
    Baker Model A Single Head Resaw : WOODWEB's Machinery Exchange

    Stenner Model ST-9 Vertical Band Resaw Listing #555165 Listed on: 03/09 ...
    Stenner Model ST-9 Vertical Band Resaw : WOODWEB's Machinery Exchange

    Forestor Model 900 Vertical Band Resaw Listing #555166 Listed on: 03/09 ...
    Forestor Model 900 Vertical Band Resaw : WOODWEB's Machinery Exchange

    Dust collection system - Clearvue CV-1800 MAX with all duct and fittings Listing #555052 Listed on: 02/28 ...
    Dust collection system - Clearvue CV-1800 MAX with all duct and fittings : WOODWEB's Machinery Exchange

    Legend Model LOBH-15.0 Dust Collector Listing #555164 Listed on: 03/09 ...
    Legend Model LOBH-15.0 Dust Collector : WOODWEB's Machinery Exchange

    Kufo Model UFO-104H2 Dust Collector Listing #555168 Listed on: 03/09 ...
    Kufo Model UFO-104H2 Dust Collector : WOODWEB's Machinery Exchange

    Dodds DE-760H Double End CNC Automatic English Drawer Dovetailer With Notching Listing #554860 Listed on: 02/09 ...
    Dodds DE-760H Double End CNC Automatic English Drawer Dovetailer With Notching : WOODWEB's Machinery Exchange

    Dodds DE-790CNC Double End CNC Automatic English Drawer Dovetailer With Trimming And Notching Listing #554859 Listed on: 02/09 ...
    Dodds DE-790CNC Double End CNC Automatic English Drawer Dovetailer With Trimming And Notching : WOODWEB's Machinery Exchange

    Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over Listing #554863 Listed on: 02/09 ...
    Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over : WOODWEB's Machinery Exchange

    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! Listing #554865 Listed on: 02/09 ...
    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! : WOODWEB's Machinery Exchange

    L & L Machinery GA-100 High Frequency Gluer Listing #554862 Listed on: 02/09 ...
    L & L Machinery GA-100 High Frequency Gluer : WOODWEB's Machinery Exchange

    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander Listing #554854 Listed on: 02/09 ...
    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander : WOODWEB's Machinery Exchange

    Progressive Systems Model SB/D-31RH 31" Fixed Arbor Gang Rip Saw Listing #554856 Listed on: 02/09 ...
    Progressive Systems Model SB/D-31RH 31" Fixed Arbor Gang Rip Saw : WOODWEB's Machinery Exchange

    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw Listing #554861 Listed on: 02/09 ...
    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw : WOODWEB's Machinery Exchange

    Wysong and Miles Model 600 & 601 Dovetailers Listing #554853 Listed on: 02/09 ...
    Wysong and Miles Model 600 & 601 Dovetailers : WOODWEB's Machinery Exchange

    TigerStop Model TSS 1000 Automated Optimizing Push Feed Saw - 2021! Listing #554864 Listed on: 02/09 ...
    TigerStop Model TSS 1000 Automated Optimizing Push Feed Saw - 2021! : WOODWEB's Machinery Exchange

    Morbidelli Model Author M400 FM CNC Router Listing #554855 Listed on: 02/09 ...
    Morbidelli Model Author M400 FM CNC Router : WOODWEB's Machinery Exchange

    Black Brothers 32" Reverse Roller Coat Laminator Listing #554858 Listed on: 02/09 ...
    Black Brothers 32" Reverse Roller Coat Laminator : WOODWEB's Machinery Exchange

    Fletcher EZ-Door Raised Panel Door Machine Listing #554857 Listed on: 02/09 ...
    Fletcher EZ-Door Raised Panel Door Machine : WOODWEB's Machinery Exchange

    Legend Model LOBH-15.0 Dust Collector Listing #554852 Listed on: 02/09 ...
    Legend Model LOBH-15.0 Dust Collector : WOODWEB's Machinery Exchange

    Putsch-Meniconi SVP 133 Vertical Panel Saw Listing #554875 Listed on: 02/09 ...
    Putsch-Meniconi SVP 133 Vertical Panel Saw : WOODWEB's Machinery Exchange

    Scmi S 630 K Planer Listing #554874 Listed on: 02/09 ...
    Scmi S 630 K Planer : WOODWEB's Machinery Exchange

    Biesse Uniclamp Listing #554876 Listed on: 02/09 ...
    Biesse Uniclamp : WOODWEB's Machinery Exchange

    Biesse AKRON 246 Edgebander Listing #555538 Listed on: 04/08 ...
    Biesse AKRON 246 Edgebander : WOODWEB's Machinery Exchange

    Sorbini SMARTCOATER-SP1 Roll Coater Listing #555540 Listed on: 04/08 ...
    Sorbini SMARTCOATER-SP1 Roll Coater : WOODWEB's Machinery Exchange

    Anderson Exxact Plus Duo Twin Table CNC Router Listing #555533 Listed on: 04/08 ...
    Anderson Exxact Plus Duo Twin Table CNC Router : WOODWEB's Machinery Exchange

    Routech Accord 30 NST Listing #555541 Listed on: 04/08 ...
    Routech Accord 30 NST : WOODWEB's Machinery Exchange

    Accurate Portable-Cab Door & Tile Measuring System # 901-5220-001-XXL Listing #555536 Listed on: 04/08 ...
    Accurate Portable-Cab Door & Tile Measuring System # 901-5220-001-XXL : WOODWEB's Machinery Exchange

    Oliver 299 Single Surface Planer Listing #555539 Listed on: 04/08 ...
    Oliver 299 Single Surface Planer : WOODWEB's Machinery Exchange

    Mar-bel DLS Laminate Slitter Listing #555531 Listed on: 04/08 ...
    Mar-bel DLS Laminate Slitter : WOODWEB's Machinery Exchange

    2019 Omni full auto CNC router infeed outfeed Listing #555532 Listed on: 04/08 ...
    2019 Omni full auto CNC router infeed outfeed : WOODWEB's Machinery Exchange

    Cefla Brushtech 4-1 Moulding Sander Listing #555534 Listed on: 04/08 ...
    Cefla Brushtech 4-1 Moulding Sander : WOODWEB's Machinery Exchange

    Anderson Stratos Pro FL CNC machine Listing #555537 Listed on: 04/08 ...
    Anderson Stratos Pro FL CNC machine : WOODWEB's Machinery Exchange

    Joos Hot press 4x8 Listing #555543 Listed on: 04/08 ...
    Joos Hot press 4x8 : WOODWEB's Machinery Exchange

    Veneer Guillotine 129" Listing #555545 Listed on: 04/08 ...
    Veneer Guillotine 129" : WOODWEB's Machinery Exchange

    Round rod milling machine Listing #554972 Listed on: 02/19 ...
    Round rod milling machine : WOODWEB's Machinery Exchange

    Felder F700z Listing #555147 Listed on: 03/08 ...
    Felder F700z : WOODWEB's Machinery Exchange

    Used Ritter R850 13 spindle horizontal borer Listing #554833 Listed on: 02/08 ...
    Used Ritter R850 13 spindle horizontal borer : WOODWEB's Machinery Exchange

    Used Ritter drawer/ box clamp Listing #554832 Listed on: 02/08 ...
    Used Ritter drawer/ box clamp : WOODWEB's Machinery Exchange

    Anderson Stratos Pro CNC machines Listing #554831 Listed on: 02/08 ...
    Anderson Stratos Pro CNC machines : WOODWEB's Machinery Exchange

    Used Ritter 4 spindle horizontal borer Listing #554834 Listed on: 02/08 ...
    Used Ritter 4 spindle horizontal borer : WOODWEB's Machinery Exchange

    Aigner push stick Listing #554836 Listed on: 02/08 ...
    Aigner push stick : WOODWEB's Machinery Exchange

    Delta Unisaw 10” Cabinet Table Saw w/ Biesemeyer Fence – 3HP – 3-Phase – Excellent Condition Listing #555386 Listed on: 03/28 ...
    Delta Unisaw 10” Cabinet Table Saw w/ Biesemeyer Fence – 3HP – 3-Phase – Excellent Condition : WOODWEB's Machinery Exchange

    PMK Systems C-1203 Listing #555527 Listed on: 04/07 ...
    PMK Systems C-1203 : WOODWEB's Machinery Exchange

    Castle TSM 35 Pocket Drill Listing #555526 Listed on: 04/07 ...
    Castle TSM 35 Pocket Drill : WOODWEB's Machinery Exchange

    Oneida Cyclone Dust Collector Listing #555525 Listed on: 04/07 ...
    Oneida Cyclone Dust Collector : WOODWEB's Machinery Exchange

    Casadei/SCM AXO 300 Listing #555517 Listed on: 04/07 ...
    Casadei/SCM AXO 300 : WOODWEB's Machinery Exchange

    Slitter Listing #555523 Listed on: 04/07 ...
    Slitter : WOODWEB's Machinery Exchange

    Walkie Stacker Listing #555521 Listed on: 04/07 ...
    Walkie Stacker : WOODWEB's Machinery Exchange

    Band Saw Listing #555520 Listed on: 04/07 ...
    Band Saw : WOODWEB's Machinery Exchange

    Boring & Dowel Machine Listing #555519 Listed on: 04/07 ...
    Boring & Dowel Machine : WOODWEB's Machinery Exchange

    Chisel Mortiser Listing #555530 Listed on: 04/07 ...
    Chisel Mortiser : WOODWEB's Machinery Exchange

    Boring & Dowel Machine Listing #555518 Listed on: 04/07 ...
    Boring & Dowel Machine : WOODWEB's Machinery Exchange

    Vintage Drill Press Listing #555529 Listed on: 04/07 ...
    Vintage Drill Press : WOODWEB's Machinery Exchange

    Dust Collector Listing #555522 Listed on: 04/07 ...
    Dust Collector : WOODWEB's Machinery Exchange

    Dust Collector Listing #555528 Listed on: 04/07 ...
    Dust Collector : WOODWEB's Machinery Exchange

    Dust Collector Listing #555524 Listed on: 04/07 ...
    Dust Collector : WOODWEB's Machinery Exchange

    Felder lift table FAT500S Listing #555145 Listed on: 03/07 ...
    Felder lift table FAT500S : WOODWEB's Machinery Exchange

    tannawitz xj Listing #555143 Listed on: 03/07 ...
    tannawitz xj : WOODWEB's Machinery Exchange

    Altendorf sliding saw Listing #554827 Listed on: 02/07 ...
    Altendorf sliding saw : WOODWEB's Machinery Exchange

    36” Timersavers wide belt sander Listing #554826 Listed on: 02/07 ...
    36” Timersavers wide belt sander : WOODWEB's Machinery Exchange

    Newman Whitney G716 Semi Automatic Knife Grinder Listing #555511 Listed on: 04/06 ...
    Newman Whitney G716 Semi Automatic Knife Grinder : WOODWEB's Machinery Exchange

    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! Listing #555505 Listed on: 04/06 ...
    Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw - 2021! : WOODWEB's Machinery Exchange

    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander Listing #555501 Listed on: 04/06 ...
    Stahle Saturn Quattro (4-Head) Top & Bottom Narrow Belt Sander : WOODWEB's Machinery Exchange

    AES Model FN 1100 Cutting & Dovetail Slot Machine Listing #555494 Listed on: 04/06 ...
    AES Model FN 1100 Cutting & Dovetail Slot Machine : WOODWEB's Machinery Exchange

    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw Listing #555504 Listed on: 04/06 ...
    Oliver Model 260-D Double Arbor Tilting Blade Sliding Table Saw : WOODWEB's Machinery Exchange

    Wysong and Miles Model 600 & 601 Dovetailers Listing #555500 Listed on: 04/06 ...
    Wysong and Miles Model 600 & 601 Dovetailers : WOODWEB's Machinery Exchange

    AES Model FN 2450 Multi-Head Hinge Boring Machine Listing #555493 Listed on: 04/06 ...
    AES Model FN 2450 Multi-Head Hinge Boring Machine : WOODWEB's Machinery Exchange

    AES Model FN 400S Heavy-Duty Miter Saw Listing #555495 Listed on: 04/06 ...
    AES Model FN 400S Heavy-Duty Miter Saw : WOODWEB's Machinery Exchange

    Black Brothers 32" Reverse Roller Coat Laminator Listing #555503 Listed on: 04/06 ...
    Black Brothers 32" Reverse Roller Coat Laminator : WOODWEB's Machinery Exchange

    Fletcher EZ-Door Raised Panel Door Machine Listing #555502 Listed on: 04/06 ...
    Fletcher EZ-Door Raised Panel Door Machine : WOODWEB's Machinery Exchange

    Baker Model A Single Head Resaw Listing #555498 Listed on: 04/06 ...
    Baker Model A Single Head Resaw : WOODWEB's Machinery Exchange

    Forestor Model 900 Vertical Band Resaw Listing #555497 Listed on: 04/06 ...
    Forestor Model 900 Vertical Band Resaw : WOODWEB's Machinery Exchange

    Stenner Model ST-9 Vertical Band Resaw Listing #555496 Listed on: 04/06 ...
    Stenner Model ST-9 Vertical Band Resaw : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SRMG510 3 Axis CNC Router Listing #555508 Listed on: 04/06 ...
    CNC Auto-Motion Model SRMG510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Legend Model LOBH-15.0 Dust Collector Listing #555492 Listed on: 04/06 ...
    Legend Model LOBH-15.0 Dust Collector : WOODWEB's Machinery Exchange

    CNC Auto-Motion RG-XHD510 3 Axis CNC Router Listing #555506 Listed on: 04/06 ...
    CNC Auto-Motion RG-XHD510 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder Listing #555507 Listed on: 04/06 ...
    Centauro T90-1600 CNC Wood Lathe with Hopper Feeder : WOODWEB's Machinery Exchange

    CNC Auto-Motion Model SR-59 3 Axis CNC Router Listing #555509 Listed on: 04/06 ...
    CNC Auto-Motion Model SR-59 3 Axis CNC Router : WOODWEB's Machinery Exchange

    Kufo Model UFO-104H2 Dust Collector Listing #555499 Listed on: 04/06 ...
    Kufo Model UFO-104H2 Dust Collector : WOODWEB's Machinery Exchange

    Whitney 50" Single Surface Planer Listing #555510 Listed on: 04/06 ...
    Whitney 50" Single Surface Planer : WOODWEB's Machinery Exchange

    Buss model 44 Planer Listing #555383 Listed on: 03/27 ...
    Buss model 44 Planer : WOODWEB's Machinery Exchange

    Mereen Johnson 419 DC Listing #555515 Listed on: 04/06 ...
    Mereen Johnson 419 DC : WOODWEB's Machinery Exchange

    Larick 410 shaper/sander Listing #555516 Listed on: 04/06 ...
    Larick 410 shaper/sander : WOODWEB's Machinery Exchange

    Butfering dual sander Listing #555514 Listed on: 04/06 ...
    Butfering dual sander : WOODWEB's Machinery Exchange

    Butfering dual sander Listing #555512 Listed on: 04/06 ...
    Butfering dual sander : WOODWEB's Machinery Exchange

    Univeral Sliding table shaper - tenoner attachement Listing #555140 Listed on: 03/06 ...
    Univeral Sliding table shaper - tenoner attachement : WOODWEB's Machinery Exchange

    ORTON TYPE "F" TILTING SPINDLE SHIP SHAPER/ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION Listing #555132 Listed on: 03/05 ...
    ORTON TYPE "F" TILTING SPINDLE SHIP SHAPER/ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    Makor S-One Finishing System Listing #555137 Listed on: 03/06 ...
    Makor S-One Finishing System : WOODWEB's Machinery Exchange

    ONSRUD W-240 OVERHEAD ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION Listing #555133 Listed on: 03/05 ...
    ONSRUD W-240 OVERHEAD ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    ONSRUD W-240 OVERHEAD ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION Listing #554797 Listed on: 02/04 ...
    ONSRUD W-240 OVERHEAD ROUTER- COMPLETELY REBUILT- EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    OLIVER #12-CD, 24" JOINTER, COMPLETELY REBUILT, EXCELLENT CONDITION Listing #554796 Listed on: 02/04 ...
    OLIVER #12-CD, 24" JOINTER, COMPLETELY REBUILT, EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    OLIVER #12-CD, 24" JOINTER, COMPLETELY REBUILT, EXCELLENT CONDITION Listing #555134 Listed on: 03/05 ...
    OLIVER #12-CD, 24" JOINTER, COMPLETELY REBUILT, EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    ONSRUD RADIAL ARM ROUTERS (2) - EXCELLENT CONDITION Listing #555131 Listed on: 03/05 ...
    ONSRUD RADIAL ARM ROUTERS (2) - EXCELLENT CONDITION : WOODWEB's Machinery Exchange

    OLIVER 92-D MORTISER, EXCELLENT CONDITION, HARD TO FIND Listing #555135 Listed on: 03/05 ...
    OLIVER 92-D MORTISER, EXCELLENT CONDITION, HARD TO FIND : WOODWEB's Machinery Exchange

    SCM Olimpic K201 Plus Listing #555142 Listed on: 03/06 ...
    SCM Olimpic K201 Plus : WOODWEB's Machinery Exchange

    Delle Vedove UV Vacuum Coat finish Line Listing #555136 Listed on: 03/06 ...
    Delle Vedove UV Vacuum Coat finish Line : WOODWEB's Machinery Exchange

    Ingersoll Rand Air Compressor Listing #555138 Listed on: 03/06 ...
    Ingersoll Rand Air Compressor : WOODWEB's Machinery Exchange

    Delta Shaper 43-372, 3/4" Spindle, 1985, 3HP, 230V, 3PH, New Belt, Spindle Bearings Listing #554823 Listed on: 02/06 ...
    Delta Shaper 43-372, 3/4" Spindle, 1985, 3HP, 230V, 3PH, New Belt, Spindle Bearings : WOODWEB's Machinery Exchange

    SAC T120 shaper Listing #554821 Listed on: 02/06 ...
    SAC T120 shaper : WOODWEB's Machinery Exchange

    2017 SCM Pratix S15 C CNC Machine – 5′ x 12′ Flat Table Listing #555488 Listed on: 04/05 ...
    2017 SCM Pratix S15 C CNC Machine – 5′ x 12′ Flat Table : WOODWEB's Machinery Exchange

    NEW SCM Class TI 120 Tilting Spindle Shaper + SCM Feed 48 – FREE SHIPPING Listing #555489 Listed on: 04/05 ...
    NEW SCM Class TI 120 Tilting Spindle Shaper + SCM Feed 48 – FREE SHIPPING : WOODWEB's Machinery Exchange

    Voorwood A117B Shape & Sand Machine (3 Shape/4 Sand Heads) Listing #555486 Listed on: 04/05 ...
    Voorwood A117B Shape & Sand Machine (3 Shape/4 Sand Heads) : WOODWEB's Machinery Exchange

    Mereen Johnson 435-H Multiblade Gang Rip Saw – 50″ Capacity Listing #555485 Listed on: 04/05 ...
    Mereen Johnson 435-H Multiblade Gang Rip Saw – 50″ Capacity : WOODWEB's Machinery Exchange

    Tyler 51″ X 51″ Power Pod Cold Press Listing #555484 Listed on: 04/05 ...
    Tyler 51″ X 51″ Power Pod Cold Press : WOODWEB's Machinery Exchange

    Voorwood P-78 Plough Machine (Score, Shape & Sand) Listing #555479 Listed on: 04/05 ...
    Voorwood P-78 Plough Machine (Score, Shape & Sand) : WOODWEB's Machinery Exchange

    2022 Knight Global 3,000 LB 24″ X 44″ Lift Tables (5 Available) Listing #555480 Listed on: 04/05 ...
    2022 Knight Global 3,000 LB 24″ X 44″ Lift Tables (5 Available) : WOODWEB's Machinery Exchange

    STROMAB STA3J0 Frame, Panel, and Door Clamp W/47″ X 116″ Capacity Listing #555481 Listed on: 04/05 ...
    STROMAB STA3J0 Frame, Panel, and Door Clamp W/47″ X 116″ Capacity : WOODWEB's Machinery Exchange

    Southworth 2’X4′ LS Series 2,500 LB Capacity Lift Table Listing #555477 Listed on: 04/05 ...
    Southworth 2’X4′ LS Series 2,500 LB Capacity Lift Table : WOODWEB's Machinery Exchange

    2016 Martin T12 Shaper W/Tenoning Table Under 40 hours of use Listing #555487 Listed on: 04/05 ...
    2016 Martin T12 Shaper W/Tenoning Table Under 40 hours of use : WOODWEB's Machinery Exchange

    WorkRite Model 4000 Wood Welder Listing #555476 Listed on: 04/05 ...
    WorkRite Model 4000 Wood Welder : WOODWEB's Machinery Exchange

    Black Bros ProTherm Infrared 60″ Feed Thru Top and Bottom Pre-Heat Oven Listing #555478 Listed on: 04/05 ...
    Black Bros ProTherm Infrared 60″ Feed Thru Top and Bottom Pre-Heat Oven : WOODWEB's Machinery Exchange

    Sicotte Model 700 Vertical Multiple Spindle Boring Machine Listing #555483 Listed on: 04/05 ...
    Sicotte Model 700 Vertical Multiple Spindle Boring Machine : WOODWEB's Machinery Exchange

    Northfield 12HD Jointer Listing #555482 Listed on: 04/05 ...
    Northfield 12HD Jointer : WOODWEB's Machinery Exchange

    Cincinnati Fan SPB 15 blower 5hp, 3phase 240/480V motor Listing #555490 Listed on: 04/05 ...
    Cincinnati Fan SPB 15 blower 5hp, 3phase 240/480V motor : WOODWEB's Machinery Exchange

    Powermatic 90 Lathe Listing #555491 Listed on: 04/05 ...
    Powermatic 90 Lathe : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Northtech Horizontal Bore. 8 Spindle , 8' table Listing #555130 Listed on: 03/05 ...
    Northtech Horizontal Bore. 8 Spindle , 8' table : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD Listing #554817 Listed on: 02/05 ...
    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD Listing #554816 Listed on: 02/05 ...
    PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD : WOODWEB's Machinery Exchange

    PALLET DISMANTLER / DISASSEMBLER - 10 HP ELECTRIC MOTOR Listing #554808 Listed on: 02/05 ...
    PALLET DISMANTLER / DISASSEMBLER - 10 HP ELECTRIC MOTOR : WOODWEB's Machinery Exchange

    PALLET DISMANTLER / DISASSEMBLER - 13 HP GASOLINE MOTOR Listing #554809 Listed on: 02/05 ...
    PALLET DISMANTLER / DISASSEMBLER - 13 HP GASOLINE MOTOR : WOODWEB's Machinery Exchange

    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - GASOLINE MOTOR Listing #554818 Listed on: 02/05 ...
    PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - GASOLINE MOTOR : WOODWEB's Machinery Exchange

    Quickwood PRO 1400 VERTICALE Denibbing Sander Listing #554812 Listed on: 02/05 ...
    Quickwood PRO 1400 VERTICALE Denibbing Sander : WOODWEB's Machinery Exchange

    2022 SCM Action FL Case Clamp Listing #554815 Listed on: 02/05 ...
    2022 SCM Action FL Case Clamp : WOODWEB's Machinery Exchange

    Zefam DSZA Jointer Listing #554813 Listed on: 02/05 ...
    Zefam DSZA Jointer : WOODWEB's Machinery Exchange

    2023 SNX nVision G1 Contour Edgebander Listing #554810 Listed on: 02/05 ...
    2023 SNX nVision G1 Contour Edgebander : WOODWEB's Machinery Exchange

    2017 SNX nVentor Listing #554811 Listed on: 02/05 ...
    2017 SNX nVentor : WOODWEB's Machinery Exchange

    Aerdon SSL-19 Scissor Lift Listing #554814 Listed on: 02/05 ...
    Aerdon SSL-19 Scissor Lift : WOODWEB's Machinery Exchange

    Linear sliding table pneumatic coping sled Listing #555468 Listed on: 04/04 ...
    Linear sliding table pneumatic coping sled : WOODWEB's Machinery Exchange

    UNO2 CABINET DOOR KIT Listing #555178 Listed on: 03/09 ...
    UNO2 CABINET DOOR KIT : WOODWEB's Machinery Exchange

    UNO2 PROCESSING CENTER INSTALLED ON BRAND NEW PM 700 Listing #555471 Listed on: 04/04 ...
    UNO2 PROCESSING CENTER INSTALLED ON BRAND NEW PM 700 : WOODWEB's Machinery Exchange

    UNO2 PROCESSING CENTER INSTALLED ON PRE-OWNED JET 3HP SINGLE PHASE MACHINE Listing #555473 Listed on: 04/04 ...
    UNO2 PROCESSING CENTER INSTALLED ON PRE-OWNED JET 3HP SINGLE PHASE MACHINE : WOODWEB's Machinery Exchange

    Sliding table shaper tenoning coping table Listing #555470 Listed on: 04/04 ...
    Sliding table shaper tenoning coping table : WOODWEB's Machinery Exchange

    Univeral Sliding table shaper - tenoner attachement Listing #555469 Listed on: 04/04 ...
    Univeral Sliding table shaper - tenoner attachement : WOODWEB's Machinery Exchange

    Grass Eco Press M Hinge Boring, Insertion Machine, 2007, 2HP, 110V, 1PH, Cleaned, Checked Listing #555474 Listed on: 04/04 ...
    Grass Eco Press M Hinge Boring, Insertion Machine, 2007, 2HP, 110V, 1PH, Cleaned, Checked : WOODWEB's Machinery Exchange

    Ritter 215E Face Frame Assembly Clamp Listing #555457 Listed on: 04/03 ...
    Ritter 215E Face Frame Assembly Clamp : WOODWEB's Machinery Exchange

    Italpresse (Italy) hydraulic frame/door clamp Listing #555466 Listed on: 04/04 ...
    Italpresse (Italy) hydraulic frame/door clamp : WOODWEB's Machinery Exchange

    KREG face frame clamping table Listing #555467 Listed on: 04/04 ...
    KREG face frame clamping table : WOODWEB's Machinery Exchange

    Doucet clamp carrier Listing #555472 Listed on: 04/04 ...
    Doucet clamp carrier : WOODWEB's Machinery Exchange

    Cosmec NR32-16CUK Cnc Router Listing #555119 Listed on: 03/04 ...
    Cosmec NR32-16CUK Cnc Router : WOODWEB's Machinery Exchange

    Powermatic WB-37 Wide Belt Sander Listing #555118 Listed on: 03/04 ...
    Powermatic WB-37 Wide Belt Sander : WOODWEB's Machinery Exchange

    Holytek 37DA Wide Belt Sander Listing #555117 Listed on: 03/04 ...
    Holytek 37DA Wide Belt Sander : WOODWEB's Machinery Exchange

    Grass Eco Press M Hinge Boring, Insertion Machine, 2007, 2HP, 110V, 1PH, Cleaned, Checked Listing #554804 Listed on: 02/04 ...
    Grass Eco Press M Hinge Boring, Insertion Machine, 2007, 2HP, 110V, 1PH, Cleaned, Checked : WOODWEB's Machinery Exchange

    Buss 4L 30" Planer w/ Grinder & Jointer 220/440V 3ph Listing #554801 Listed on: 02/04 ...
    Buss 4L 30" Planer w/ Grinder & Jointer 220/440V 3ph : WOODWEB's Machinery Exchange

    Master / Kindt Collins 24" Disc sander Listing #554800 Listed on: 02/04 ...
    Master / Kindt Collins 24" Disc sander : WOODWEB's Machinery Exchange

    Coyer Goodspeed Back Knife Lathe CP168A Listing #554803 Listed on: 02/04 ...
    Coyer Goodspeed Back Knife Lathe CP168A : WOODWEB's Machinery Exchange

    Ritter R700 Double Sided 4 x 49 Platen Edgesander, New Graphite, Guard Recond. 2HP, 3PH Listing #555458 Listed on: 04/03 ...
    Ritter R700 Double Sided 4 x 49 Platen Edgesander, New Graphite, Guard Recond. 2HP, 3PH : WOODWEB's Machinery Exchange

    Rangate JOINTING - Radius Chamfer Cutters (50 / 60mm height) Listing #555454 Listed on: 04/03 ...
    Rangate JOINTING - Radius Chamfer Cutters (50 / 60mm height) : WOODWEB's Machinery Exchange

    PMK Systems C-1203 Listing #555456 Listed on: 04/03 ...
    PMK Systems C-1203 : WOODWEB's Machinery Exchange

    Denray 9600B Custom Downdraft Table Listing #555455 Listed on: 04/03 ...
    Denray 9600B Custom Downdraft Table : WOODWEB's Machinery Exchange

    MB Roba-T brush sander Listing #555460 Listed on: 04/03 ...
    MB Roba-T brush sander : WOODWEB's Machinery Exchange

    Tiger Gamma T-190 Hot Press (Made by Italpresse) Listing #555103 Listed on: 03/03 ...
    Tiger Gamma T-190 Hot Press (Made by Italpresse) : WOODWEB's Machinery Exchange

    Randek Auto Floor System Listing #555102 Listed on: 03/03 ...
    Randek Auto Floor System : WOODWEB's Machinery Exchange

    Door | Window - Cutter for Euro Groove Multi-Point Hardware Listing #555100 Listed on: 03/03 ...
    Door | Window - Cutter for Euro Groove Multi-Point Hardware : WOODWEB's Machinery Exchange

    Used Ritter R850 13 spindle horizontal borer Listing #555115 Listed on: 03/03 ...
    Used Ritter R850 13 spindle horizontal borer : WOODWEB's Machinery Exchange

    Ligmatech Return Conveyor Listing #555112 Listed on: 03/03 ...
    Ligmatech Return Conveyor : WOODWEB's Machinery Exchange

    Used Ritter drawer/ box clamp Listing #555116 Listed on: 03/03 ...
    Used Ritter drawer/ box clamp : WOODWEB's Machinery Exchange

    Used Ritter 4 spindle horizontal borer Listing #555114 Listed on: 03/03 ...
    Used Ritter 4 spindle horizontal borer : WOODWEB's Machinery Exchange

    Lobo Arch Door Shaper Listing #555106 Listed on: 03/03 ...
    Lobo Arch Door Shaper : WOODWEB's Machinery Exchange

    Aigner push stick Listing #555113 Listed on: 03/03 ...
    Aigner push stick : WOODWEB's Machinery Exchange

    Ritter R700 Double Sided 4 x 49 Platen Edgesander, New Graphite, Guard Recond. 2HP, 3PH Listing #554791 Listed on: 02/03 ...
    Ritter R700 Double Sided 4 x 49 Platen Edgesander, New Graphite, Guard Recond. 2HP, 3PH : WOODWEB's Machinery Exchange

    Biesse CNC Router Model Rover K FT Nesting Cell Listing #554792 Listed on: 02/03 ...
    Biesse CNC Router Model Rover K FT Nesting Cell : WOODWEB's Machinery Exchange

    Homag Loopteq 0-200 Return Conveyor Listing #555446 Listed on: 04/02 ...
    Homag Loopteq 0-200 Return Conveyor : WOODWEB's Machinery Exchange

    Northfield 36" Band Saw Listing #555286 Listed on: 03/17 ...
    Northfield 36" Band Saw : WOODWEB's Machinery Exchange

    Brandt Homag kdf440c Listing #555453 Listed on: 04/02 ...
    Brandt Homag kdf440c : WOODWEB's Machinery Exchange

    SCM SI300 5.5 ft Sliding Table Saw Listing #555448 Listed on: 04/02 ...
    SCM SI300 5.5 ft Sliding Table Saw : WOODWEB's Machinery Exchange

    Superfici Finish Line Listing #555451 Listed on: 04/02 ...
    Superfici Finish Line : WOODWEB's Machinery Exchange

    Busellato Jet 3006 Listing #555449 Listed on: 04/02 ...
    Busellato Jet 3006 : WOODWEB's Machinery Exchange

    Cantek PCS14 Left-hand Upcut Chop Saw Listing #555450 Listed on: 04/02 ...
    Cantek PCS14 Left-hand Upcut Chop Saw : WOODWEB's Machinery Exchange

    Delta Unisaw with Biesmeyer fence and Excalibur sliding table Listing #555447 Listed on: 04/02 ...
    Delta Unisaw with Biesmeyer fence and Excalibur sliding table : WOODWEB's Machinery Exchange

    Grizzly 7 1/2 HP dust collector Listing #555452 Listed on: 04/02 ...
    Grizzly 7 1/2 HP dust collector : WOODWEB's Machinery Exchange

    Northtech Model iDovetail30 CNC Dovetailer Listing #555070 Listed on: 03/02 ...
    Northtech Model iDovetail30 CNC Dovetailer : WOODWEB's Machinery Exchange

    Northtech Model NT-iGlue450 Automatic Dovetail Gluer Listing #555072 Listed on: 03/02 ...
    Northtech Model NT-iGlue450 Automatic Dovetail Gluer : WOODWEB's Machinery Exchange

    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw Listing #555075 Listed on: 03/02 ...
    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw : WOODWEB's Machinery Exchange

    Homag Model KAL210 Ambition 2262 Edgebander Listing #555081 Listed on: 03/02 ...
    Homag Model KAL210 Ambition 2262 Edgebander : WOODWEB's Machinery Exchange

    Oliver 4265C.102.4S 12" Jointer with 4-Side Helical Cutterhead 5HP 3Ph Baldor Motor Listing #555074 Listed on: 03/02 ...
    Oliver 4265C.102.4S 12" Jointer with 4-Side Helical Cutterhead 5HP 3Ph Baldor Motor : WOODWEB's Machinery Exchange

    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars Listing #555085 Listed on: 03/02 ...
    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars : WOODWEB's Machinery Exchange

    Newman Model EPR-24-SS Short-Stock Double Sided Surface Planer Listing #555080 Listed on: 03/02 ...
    Newman Model EPR-24-SS Short-Stock Double Sided Surface Planer : WOODWEB's Machinery Exchange

    Northtech Model NT-625MS Sliding Table Shaper Listing #555073 Listed on: 03/02 ...
    Northtech Model NT-625MS Sliding Table Shaper : WOODWEB's Machinery Exchange

    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity Listing #555083 Listed on: 03/02 ...
    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity : WOODWEB's Machinery Exchange

    Friulmac Model Randomat E T-REX End Profiling Machine Listing #555084 Listed on: 03/02 ...
    Friulmac Model Randomat E T-REX End Profiling Machine : WOODWEB's Machinery Exchange

    Alfamacchine Model TA-350 Double Miter Saw Listing #555079 Listed on: 03/02 ...
    Alfamacchine Model TA-350 Double Miter Saw : WOODWEB's Machinery Exchange

    Ruvo Model 2200A Semi-Automatic Stair Router Listing #555076 Listed on: 03/02 ...
    Ruvo Model 2200A Semi-Automatic Stair Router : WOODWEB's Machinery Exchange

    Unknown Pinch Roll Listing #555078 Listed on: 03/02 ...
    Unknown Pinch Roll : WOODWEB's Machinery Exchange

    Haas HTLL 145/185 Waste Grinder Listing #555088 Listed on: 03/02 ...
    Haas HTLL 145/185 Waste Grinder : WOODWEB's Machinery Exchange

    Grizzly Dovetail Machine Listing #555095 Listed on: 03/02 ...
    Grizzly Dovetail Machine : WOODWEB's Machinery Exchange

    Wide Belt Sander Listing #555096 Listed on: 03/02 ...
    Wide Belt Sander : WOODWEB's Machinery Exchange

    Sliding Table Saw Listing #555094 Listed on: 03/02 ...
    Sliding Table Saw : WOODWEB's Machinery Exchange

    Phase Converter Listing #555098 Listed on: 03/02 ...
    Phase Converter : WOODWEB's Machinery Exchange

    Superfici Finish Line Listing #555089 Listed on: 03/02 ...
    Superfici Finish Line : WOODWEB's Machinery Exchange

    Cantek HR300PBX resaw Listing #555099 Listed on: 03/02 ...
    Cantek HR300PBX resaw : WOODWEB's Machinery Exchange

    Black Brothers Spare Rolls for Model 775 68" Glue Spreader Listing #555077 Listed on: 03/02 ...
    Black Brothers Spare Rolls for Model 775 68" Glue Spreader : WOODWEB's Machinery Exchange

    Busellato Jet 3006 Listing #555091 Listed on: 03/02 ...
    Busellato Jet 3006 : WOODWEB's Machinery Exchange

    Dust Collector Listing #555097 Listed on: 03/02 ...
    Dust Collector : WOODWEB's Machinery Exchange

    Cantek PCS14 Left-hand Upcut Chop Saw Listing #555090 Listed on: 03/02 ...
    Cantek PCS14 Left-hand Upcut Chop Saw : WOODWEB's Machinery Exchange

    Larrick 360A Profile Sander Listing #555071 Listed on: 03/02 ...
    Larrick 360A Profile Sander : WOODWEB's Machinery Exchange

    Larrick 120 profile sander Listing #555082 Listed on: 03/02 ...
    Larrick 120 profile sander : WOODWEB's Machinery Exchange

    Roba Lineal Profile sander w/oscillating heads Listing #555087 Listed on: 03/02 ...
    Roba Lineal Profile sander w/oscillating heads : WOODWEB's Machinery Exchange

    Deihl MR 90 Gang Rip Saw Listing #555093 Listed on: 03/02 ...
    Deihl MR 90 Gang Rip Saw : WOODWEB's Machinery Exchange

    Taylor Plate Spreader Listing #555086 Listed on: 03/02 ...
    Taylor Plate Spreader : WOODWEB's Machinery Exchange

    Northtech Model iDovetail30 CNC Dovetailer Listing #554774 Listed on: 02/02 ...
    Northtech Model iDovetail30 CNC Dovetailer : WOODWEB's Machinery Exchange

    Northtech Model NT-iGlue450 Automatic Dovetail Gluer Listing #554775 Listed on: 02/02 ...
    Northtech Model NT-iGlue450 Automatic Dovetail Gluer : WOODWEB's Machinery Exchange

    Omga T2020 NC Elite Throughfeed Optimizing Saw Listing #554781 Listed on: 02/02 ...
    Omga T2020 NC Elite Throughfeed Optimizing Saw : WOODWEB's Machinery Exchange

    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw Listing #554778 Listed on: 02/02 ...
    ATech Model Crater-06 A/450 Heavy Duty 18" Automatic Upcut Miter Saw : WOODWEB's Machinery Exchange

    Homag Model KAL210 Ambition 2262 Edgebander Listing #554784 Listed on: 02/02 ...
    Homag Model KAL210 Ambition 2262 Edgebander : WOODWEB's Machinery Exchange

    Oliver 4265C.102.4S 12" Jointer with 4-Side Helical Cutterhead 5HP 3Ph Baldor Motor Listing #554777 Listed on: 02/02 ...
    Oliver 4265C.102.4S 12" Jointer with 4-Side Helical Cutterhead 5HP 3Ph Baldor Motor : WOODWEB's Machinery Exchange

    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars Listing #554787 Listed on: 02/02 ...
    Mereen-Johnson Model 312-DC Fixed-Arbor Gang Rip Saw w/ TwistLock Collars : WOODWEB's Machinery Exchange

    Cameron Automation MRS-340M2 Gang Rip Saw with Skew Infeed Listing #554779 Listed on: 02/02 ...
    Cameron Automation MRS-340M2 Gang Rip Saw with Skew Infeed : WOODWEB's Machinery Exchange

    Newman Model EPR-24-SS Short-Stock Double Sided Surface Planer Listing #554783 Listed on: 02/02 ...
    Newman Model EPR-24-SS Short-Stock Double Sided Surface Planer : WOODWEB's Machinery Exchange

    Northtech Model NT-625MS Sliding Table Shaper Listing #554776 Listed on: 02/02 ...
    Northtech Model NT-625MS Sliding Table Shaper : WOODWEB's Machinery Exchange

    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity Listing #554785 Listed on: 02/02 ...
    Weinig/Dimter Model OptiCut 450 Optimizing Cut Off Saw 12" Capacity : WOODWEB's Machinery Exchange

    Friulmac Model Randomat E T-REX End Profiling Machine Listing #554786 Listed on: 02/02 ...
    Friulmac Model Randomat E T-REX End Profiling Machine : WOODWEB's Machinery Exchange

    Alfamacchine Model TA-350 Double Miter Saw Listing #554782 Listed on: 02/02 ...
    Alfamacchine Model TA-350 Double Miter Saw : WOODWEB's Machinery Exchange

    Baker Single Head Notching Machine Listing #554772 Listed on: 02/02 ...
    Baker Single Head Notching Machine : WOODWEB's Machinery Exchange

    Unknown Pinch Roll Listing #554780 Listed on: 02/02 ...
    Unknown Pinch Roll : WOODWEB's Machinery Exchange

    Italpresse SCF/10 Hot Press Listing #554771 Listed on: 02/02 ...
    Italpresse SCF/10 Hot Press : WOODWEB's Machinery Exchange

    Double Sided Hydraulic Clamp Listing #554773 Listed on: 02/02 ...
    Double Sided Hydraulic Clamp : WOODWEB's Machinery Exchange

    Band Saw Listing #554768 Listed on: 02/02 ...
    Band Saw : WOODWEB's Machinery Exchange

    Boring & Dowel Machine Listing #554769 Listed on: 02/02 ...
    Boring & Dowel Machine : WOODWEB's Machinery Exchange

    Boring & Dowel Machine Listing #554770 Listed on: 02/02 ...
    Boring & Dowel Machine : WOODWEB's Machinery Exchange

    Biesse Rover A 1536 Flat Table CNC Router with C-Axis Listing #555444 Listed on: 04/01 ...
    Biesse Rover A 1536 Flat Table CNC Router with C-Axis : WOODWEB's Machinery Exchange

    CNC Cabinet Shop - Auction Closes April 1 Listing #555129 Listed on: 03/05 ...
    CNC Cabinet Shop - Auction Closes April 1 : WOODWEB's Machinery Exchange

    Full Cabinet shop tools for purchase Listing #555445 Listed on: 04/01 ...
    Full Cabinet shop tools for purchase : WOODWEB's Machinery Exchange

    GRIGGO GAL/P LOUVER GROOVER Listing #555054 Listed on: 03/01 ...
    GRIGGO GAL/P LOUVER GROOVER : WOODWEB's Machinery Exchange

      ---   Return to Top   ---     


    Classified Ads Exchange Results:

    Turn-key Lower Fairfield County High- end Cabinet shop for sale, Owners retiring Listing #433125 Listed on: 02/13 ...
    Turn-key Lower Fairfield County High- end Cabinet shop for sale, Owners retiring : WOODWEB's Classified Ads Exchange

      ---   Return to Top   ---     


    Project Gallery Results:

    Sawhorses
    Sawhorses Listing #4052 Listed on: 2013-02-07 22:10:03

    Brooklyn Brownstone Doors
    Brooklyn Brownstone Doors Listing #509 Listed on: 2007-01-17 02:33:41

    wine rack
    wine rack Listing #1560 Listed on: 2008-11-12 09:43:55

    Cocktail Table
    Cocktail Table Listing #116 Listed on: 2004-02-03 08:55:20

      ---   Return to Top   ---     


    Shop Gallery Results:

    Triumph Play Systems
    Triumph Play Systems Listing #1606 Listed on: 2015-04-02 17:47:17

    Elliott Woodworking
    Elliott Woodworking Listing #561 Listed on: 2008-01-15 21:31:52

    Freed Hardwoods
    Freed Hardwoods Listing #593 Listed on: 2008-02-24 15:22:06

    Innerwood & Company LLC
    Innerwood & Company LLC Listing #929 Listed on: 2009-09-27 18:22:19

    lakeland stair & millwork
    lakeland stair & millwork Listing #617 Listed on: 2008-03-18 19:43:35

    First Cut Custom Woodworks Inc. NY
    First Cut Custom Woodworks Inc. NY Listing #618 Listed on: 2008-03-20 08:24:06


    Listing #879 Listed on: 2009-05-18 11:48:57

    Covenant Millwork Inc.
    Covenant Millwork Inc. Listing #1404 Listed on: 2012-10-17 08:16:48

    Blumer & Stanton, Inc.
    Blumer & Stanton, Inc. Listing #994 Listed on: 2010-02-03 20:52:30

    Follis Millwork Inc.
    Follis Millwork Inc. Listing #625 Listed on: 2008-04-03 14:12:58

    Harden Cabinets, LLC
    Harden Cabinets, LLC Listing #1541 Listed on: 2014-04-15 09:03:13

    PT.Furnesse
    PT.Furnesse Listing #1381 Listed on: 2012-08-07 23:23:42

    Cabinets by Persch
    Cabinets by Persch Listing #1657 Listed on: 2016-04-01 07:02:58

    JCJ Design
    JCJ Design Listing #1538 Listed on: 2014-04-03 15:53:16

    American Artistry in Wood
    American Artistry in Wood Listing #1468 Listed on: 2013-05-30 13:18:45

    KPC Kitchen Cabinets
    KPC Kitchen Cabinets Listing #1499 Listed on: 2013-08-28 17:24:49

    DeWitt Woodworking
    DeWitt Woodworking Listing #769 Listed on: 2008-11-10 18:41:39

    Hansen Woodwork
    Hansen Woodwork Listing #687 Listed on: 2008-06-24 12:36:21

    Loh Woodworking Inc.
    Loh Woodworking Inc. Listing #845 Listed on: 2009-03-20 17:25:48

    Brown Custom Woodworks
    Brown Custom Woodworks Listing #802 Listed on: 2009-01-21 23:42:52

    Drafting & Design by Mikhail
    Drafting & Design by Mikhail Listing #844 Listed on: 2009-03-20 12:49:38

    Shop Drawings by Taylor Blueprint
    Shop Drawings by Taylor Blueprint Listing #1593 Listed on: 2015-01-25 06:25:39

    eximwood
    eximwood Listing #1450 Listed on: 2013-02-22 16:04:25

    Woodchuckers
    Woodchuckers Listing #1587 Listed on: 2014-12-19 18:36:20

    Artistic Cabinet Shop
    Artistic Cabinet Shop Listing #1509 Listed on: 2013-09-18 10:53:24

    Unique Spiral Stairs
    Unique Spiral Stairs Listing #1560 Listed on: 2014-05-17 11:35:01

    Bernhard Woodwork Ltd.
    Bernhard Woodwork Ltd. Listing #1405 Listed on: 2012-10-17 13:58:35

    Thompson Custom Woodworking
    Thompson Custom Woodworking Listing #249 Listed on: 2007-01-30 16:13:26

    Josefs Art Woodturning
    Josefs Art Woodturning Listing #860 Listed on: 2009-04-11 10:41:23

    Kay Dee Company of Omaha
    Kay Dee Company of Omaha Listing #1770 Listed on: 2017-12-08 07:42:59

    lilienthal cabinets
    lilienthal cabinets Listing #663 Listed on: 2008-05-22 16:45:34

    Bernhard Woodwork Ltd.
    Bernhard Woodwork Ltd. Listing #532 Listed on: 2007-12-10 17:19:40

    Western Dovetail Inc
    Western Dovetail Inc Listing #1154 Listed on: 2010-11-29 19:33:30

    BannerElk Trading Company, Inc.
    BannerElk Trading Company, Inc. Listing #449 Listed on: 2007-10-04 00:10:51

    Component Finishing Unlimited
    Component Finishing Unlimited Listing #1533 Listed on: 2014-02-14 14:59:54

    Ardent Custom Woodworking LLC
    Ardent Custom Woodworking LLC Listing #1573 Listed on: 2014-07-10 08:02:00

    Kevin Dunphy Custom Woodworking
    Kevin Dunphy Custom Woodworking Listing #1470 Listed on: 2013-06-07 16:41:04

    Munoz Woodworking Inc.
    Munoz Woodworking Inc. Listing #1469 Listed on: 2013-06-06 04:17:58

    Michael Greco, Cabinetmaker
    Michael Greco, Cabinetmaker Listing #1526 Listed on: 2014-01-04 13:38:08

    Lift & Stor Beds
    Lift & Stor Beds Listing #1588 Listed on: 2015-01-02 17:34:17

    Clarks Gutters and Trees
    Clarks Gutters and Trees Listing #1598 Listed on: 2015-03-01 16:06:48

    CB Kearney Fine Woodworking
    CB Kearney Fine Woodworking Listing #1646 Listed on: 2016-02-28 21:23:37

    Clarks Gutters and Trees
    Clarks Gutters and Trees Listing #1597 Listed on: 2015-02-23 12:06:37

      ---   Return to Top   ---     


    Shop Built Equipment Gallery Results:

    twin spindle boring machine fence
    twin spindle boring machine fence Listing #135 Listed on: 2014-12-21 17:53:53

    horizontal mortising jig for chairs, etc.
    horizontal mortising jig for chairs, etc. Listing #63 Listed on: 2011-10-29 14:59:23

    Panel lift
    Panel lift Listing #83 Listed on: 2012-08-15 21:42:51

      ---   Return to Top   ---     


    Sawmill Gallery Results:

    Frank Thomas Sawmill
    Frank Thomas Sawmill Listing #193 Listed on: 2008-10-17 20:37:07

    ARKANSAWYER SAWMILL Inc.
    ARKANSAWYER SAWMILL Inc. Listing #115 Listed on: 2008-03-26 19:05:55

    McConnell Millworks
    McConnell Millworks Listing #169 Listed on: 2008-08-03 17:54:20

    Waters Edge Woods
    Waters Edge Woods Listing #506 Listed on: 2014-03-10 14:02:50

    California Urban Lumber
    California Urban Lumber Listing #236 Listed on: 2009-04-09 17:10:48

    Appleton Custom Lumber
    Appleton Custom Lumber Listing #205 Listed on: 2008-12-01 20:40:21

    Western Cedar Fence Busters
    Western Cedar Fence Busters Listing #219 Listed on: 2009-02-10 19:54:09

    Butler Adams Hardwoods
    Butler Adams Hardwoods Listing #575 Listed on: 2017-12-22 12:07:48

    The Sawmill
    The Sawmill Listing #279 Listed on: 2010-01-08 23:07:26

    R. Jemithan Timber Frame Company
    R. Jemithan Timber Frame Company Listing #378 Listed on: 2011-08-15 19:54:06

    Eberlywoods
    Eberlywoods Listing #315 Listed on: 2010-07-29 00:45:34

    Brideck Enterprises Portable Sawmill Service
    Brideck Enterprises Portable Sawmill Service Listing #242 Listed on: 2009-09-15 23:51:55

    Woodchuck Sawmill & Lumber LLC
    Woodchuck Sawmill & Lumber LLC Listing #364 Listed on: 2011-05-10 20:32:17

    R & R Lumber Products
    R & R Lumber Products Listing #468 Listed on: 2013-02-04 02:00:53

    native lumber company
    native lumber company Listing #413 Listed on: 2012-03-05 19:18:05

    Hewn
    Hewn Listing #554 Listed on: 2016-12-27 16:22:23

      ---   Return to Top   ---     


    Sawing and Drying Directory Results:

    Dimensioni CAD
    Dimensioni CAD Listing #842 Listed on: 2012-01-11 01:27:18

      ---   Return to Top   ---